Flow‐Injection Chemiluminescence Analysis of Cloperastione Hydrochloride

Abstract

A new chemiluminescence (CL) reaction was observed when cloperastine hydrochloride was injected into the reaction mixture after the CL reaction of Ce(IV) and sodium sulfite finished. A new flow injection CL method for the determination of cloperastine hydrochloride was established based on the CL reaction. The relative standard deviation (RSD) for the determination of cloperastine hydrochloride was 1.3% (n=11, c=1.0×10^?6 g/mL). The CL intensity responded linearly to the concentration of cloperastine hydrochloride in the range 2.0×10^?7～2.0×10^?5 g/mL (r=0.9962). The detection limit was 5×10^?8 g/mL cloperastine hydrochloride. The method had been applied to the determination of cloperastine hydrochloride in tablets with satisfactory results.     

The second chemiluminescence emission of luminol-periodate-menadione sodium bisulfite system and its analytical application

In this paper, a new chemiluminescence phenomenon described as the second chemiluminescence emission was observed when menadione sodium bisulfite was injected into a reaction mixture of luminol and potassium periodate, in which luminol was oxidized by excess amount of potassium periodate for about 24 h. The mechanism of the second chemiluminescence emission was proposed based a series of experiments. Moreover, our experiment discovered that the second chemiluminescence intensity was a linear function of the concentration of menadione sodium bisulfite in the range of 2 × 10⁻⁹ to 4 × 10⁻⁵ g L⁻¹. Based on this phenomenon, a new flow-injection method for the determination of menadione sodium bisulfite has been established.     

基于纳米TiO2的化学发光法检测核黄素

纳米TiO2与NaOH溶液作用能产生化学发光辐射,在表面活性剂十六烷基三甲基溴化铵(CTAB)的存在下,核黄素的加入能增强纳米TiO2-NaOH溶液的化学发光强度。基于此,构建了纳米TiO2-NaOH溶液化学发光新体系,建立了纳米TiO2-NaOH-核黄素体系检测核黄素的化学发光新方法。在优化实验条件下,核黄素质量浓度在5.0×10-6～3.5×10-4g/mL范围内与化学发光强度呈良好的线性关系,检出限为3.0×10-6g/mL,对2.5×10-5g/mL的核黄素进行11次平行测定,相对标准偏差为2.9%。该方法用于维生素B2片剂的测定,其结果与药典方法测得一致。该文同时对化学发光反应的机理进行了初步探讨。     

Determination of Three Imidazole Derivatives by Flow-Injection Chemiluminescence

Abstract

A rapid, simple, and sensitive method was developed for the determination of three imidazole derivatives based on their quenching effect on bis(2,4,6-tricholorophenyl) oxalate (TCPO)–H₂O₂ chemiluminescence (CL) in the presence of rhodamine 6 G. Conditions affecting CL intensity were studied. With sodium dodecyl sulfate (SDS) as the additional agent, the relative standard deviation (RSD) was more twice the RSD without SDS. Under optimal conditions, good linear ranges were obtained from 1.0 × 10^?4 g/mL to 1.0 × 10^?6 g/mL, 1.0 × 10^?5 g/mL to 1.0 × 10^?7 g/mL, and 1.0 × 10^?5 g/mL to 7.0 × 10^?7 g/mL, with detection limits of 8.0 × 10^?7 g/mL, 7.0 × 10^?8 g/mL, and 8.0 × 10^?8 g/mL (S/N = 3) for hydrobenzole hydrochloride, thiamazole, and mizolastine, respectively. The RSDs for 13 consecutive injections of 1.0 × 10^?6 g/mL hydrobenzole hydrochloride, thiamazole, and mizolastine were 1.89%, 1.47%, and 1.69%, respectively, and satisfied results were obtained with the method applied to their pharmaceutical preparations. The possible CL mechanism was simply discussed.     

流动注射-抑制化学发光法测定银杏叶中总黄酮含量

提出了流动注射-抑制化学发光测定银杏叶中的总黄酮含量的分析方法.它是基于银杏叶中物质黄酮类具有还原性,在碱性条件下还原H_2O_2,抑制鲁米诺-H_2O_2-KIO_4体系的化学发光,其抑制程度的大小与总黄酮的含量成线性关系.方法的线性范围为1.5～30μg/mL,检出限为0.03μg/mL,相对标准偏差(RSD)为1.2%,采样频率为240次/h,回收率为101%～104%.     

异硫氰酸荧光素-人血清白蛋白标记物化学发光反应的研究

采用反相流动注射分析方法,研究了异硫氰酸荧光素（FITC）－人血清白蛋白（HSA）标记物的化学发光性能和反应的最佳条件,建立了化学发光测定人血清白蛋白的新方法。体系的化学发光强度与人血清白蛋白的含量在0．08－16μg/mL内呈线性关系,方法的检出限为0．04μg/mL。讨论了蛋白质标记物化学发光性增强的原因。     

A flow injection chemiluminescence system for the determination of isoniazid

A chemiluminescence (CL) flow system is described for the determination of isoniazid based on its enhancement on the chemiluminescence (CL) emission produced upon mixing a hexacyanoferrate(III) solution with an alkaline luminol solution. The system responds linearly to isoniazid concentration in the range 0–1 mg/L with a detection limit (3σ) of 0.03 μg/L, relative standard deviation (RSD) of 1.2% for 0.1 mg/L isoniazid (n = 11). The system has been successfully applied to the determination of isoniazid in pharmaceutical preparations.     

铁氰化钾化学发光体系测定芦丁

基于在ＮａＯＨ碱性介质中,Ｆｅ（ＣＮ）３－６可以直接氧化芦丁产生强的化学发光这一现象,并结合流动注射分析技术,提出了一种直接化学发光测定芦丁的新方法。该方法测定芦丁的线性范围为１×１０－４～　１×１０－６　ｇ／ｍＬ,检出限为３．４×１０－７　ｇ／ｍＬ（３σ）。对５×１０－６　ｇ／ｍＬ芦丁溶液连续１１次测量的相对标准偏差为３．７％。该方法已成功地用于药片中芦丁含量的测定。     

在线电生强氧化剂钴(Ⅲ)化学发光法测定地塞米松磷酸钠

本文基于Co3+在硫酸介质中能氧化地塞米松磷酸钠产生化学发光这一特性,建立了一种流动注射化学发光测定地塞米松磷酸钠的新方法。其中不稳定的强氧化剂Co3+是通过在硫酸介质中恒电流电解CoSO4在线产生的,从而消除了由于试剂不稳定性带来的一些不利因素。该方法测定地塞米松磷酸钠的线性范围为1～20 mg/L,检出限为3.2×10－7g/mL(DL=3S/r),相对标准偏差小于5%。该方法已成功地用于地塞米松磷酸钠注射液中地塞米松磷酸钠的测定。     

A flow injection chemiluminescence method for the determination of fluoroquinolone derivative using the reaction of luminol and hydrogen peroxide catalyzed by gold nanoparticles

Based on the enhancement of chemiluminescence (CL) of luminol-hydrogen peroxide-gold nanoparticles system by fluoroquinolones (FQs), a novel and rapid CL method is reported for the determination of FQs derivatives. Under the optimum conditions, the CL intensity is proportional to the concentration of FQs derivative in solution. The corresponding linear regression equations are established over the range of 0.08-1.28 μg/mL for norfloxacin, 0.013-1.32 μg/mL for ciprofloxacin, 0.014-1.4 μg/mL for lomefloxacin, 0.029-1.46 μg/mL for fleroxacin, 0.02-1.0 μg/mL for ofloxacin and 0.01-1.44 μg/mL for levofloxacin, respectively. The limits of detection (S/N = 3) are 3.2, 9.5, 7.0, 9.0, 8.0, and 8.0 ng/mL with the relative standard deviation (n = 11) 4.3, 1.5, 1.9, 1.3, 1.6 and 2.1% for norfloxacin, ciprofloxacin, lomefloxacin, fleroxacin, ofloxacin and levofloxacin, respectively. This proposed method has been applied to detect FQs derivatives in human urine successfully.     

Spectrophotometry Determination of Ciprofloxacin in Serum Using Iron(III) Ion as Chromogenic Agent

ABSTRACT

An analytical procedure for the determination of ciprofloxacin in serum without previous extraction has been developed. The determination was carried out using iron(III) nitrate as chromogenic agent, with the addition of sodium dodecylsulfate, at pH = 3.0. Absorbance was measured at 430 nm. The range of linearity was between 0.5 – 20.0 μg/mL with a detection limit 0.2 μg/mL.     

Flow-Injection Chemiluminescence Determination of Fluoroquinolones

ABSTRACT

A new flow-injection CL method was developed for the determination of fluoroquinolones including ofloxacin, norfloxacin, ciprofloxacin and lomefloxacin in pharmaceutical preparations, based on the chemiluminescence reaction of sulphite with cerium(IV) sensitized by these compounds. The linear ranges are 0.04 to 4.0 μg ml^?1 for ofloxacin and 0.4 to 40.0 μg ml^?1 for norfloxacin, ciprofloxacin and lomefloxacin, respectively. The detection limits are 0.016 μg ml^?1 for ofloxacin and 0.16 μg ml ^?1 for norfloxacin, ciprofloxacin and lomefloxacin, respectively. The relative standard deviations (RSD) are 2.1 to 2.6% (n=10) for these fluoroquinolones. The analytical procedure has been applied to the determination of the fluoroquinolones in pharmaceutical commercial formulations. The results are in agreement with those obtained by the official methods.     

Flow Injection Chemiluminescence Determination of Phenol in Neutral Medium

A new flow injection chemiluminescence method for the determination of phenol was proposed, based upon the chemiluminescence reaction of phenol, N-bromosuccinimide, and hydrogen peroxide in neutral aqueous medium in the presence of cetyltrimethylammonium bromide surfactant micelles. The chemiluminescence signal was proportional to the concentration of phenol in the range of 1.0 × 10^?7?8.0 × 10^?6 g/mL with a detection limit of 3 × 10^?8 g/mL. The relative standard deviation for 1.0 × 10^?6 g/mL phenol solution was 2.0% (n = 11). The proposed method was successfully applied to the determination of phenol in phenol ear drops. A possible CL reaction mechanism was also discussed briefly.     

高效液相色谱-化学发光法检测牛奶中磺胺类药物残留

以4种磺胺类药物(Sulfonamides, SAs), 即磺胺脒(Sulfaguanidine, SGD)、磺胺嘧啶(sulfadiazine, SDZ)、磺胺噻唑(sulfathiazole, STZ)和磺胺二甲嘧啶(Sulfamethazine,SMZ)为分析物,基于其在碱性介质中对Ag配合物-鲁米诺(Luminol)与Ni配合物鲁米诺两化学发光体系发光强度均具有抑制作用的性质,建立了高效液相色谱-化学发光法检测牛奶中4种磺胺类药物的方法.将化学发光体系作为高效液相色谱的新型检测器,并对两种化学发光体系的检测器性能进行了比较.4种磺胺药物经高效液相色谱分离后,分别与Ag-Luminol及Ni-Luminol化学发光体系作用.色谱条件为:反相C18分离柱(250 mm × 4.6 mm,5 μm);0.1%甲酸-甲醇为流动相(V/V);梯度洗脱;流速1 mL/min.化学发光条件:Ag、Ni-Luminol两体系中,Ag配合物浓度1.4×10.-4 mol/L(含0.12 mol/L NaOH);Ni配合物浓度1.5×10.-5 mol/L(含0.12 mol/L NaOH);Luminol浓度均为1.2×10.-7 mol/L;试剂流速均为1.0 mL/min.在最佳的分离检测条件下,Ag-Luminol体系检测4种磺胺类药物的检出限分别为0.15、0.96、1.10和1.50 μg/mL,加标回收率为81.0%~101.5%;Ni-Luminol体系检测SGD、SDZ、STZ 3种磺胺类药物的检出限分别为1.5、17.2和16.8 μg/mL,加标回收率为83.9%~110.8%.相比之下,Ag-Luminol体系作为高效液相色谱检测器更佳.应用本方法对牛奶中4种磺胺类药物残留量进行检测,结果令人满意.     

Flow Injection Post-Chemiluminescence Reaction of Astemizole in N-Bromosuccinimide-Calcein System and Its Application

A flow injection post chemiluminescence (FI-PCL) reaction was found when astemizole was mixed with the CL reaction mixture of N-bromosuccinimide and calcein under alkaline conditions. Based on this observation, a simple and sensitive post chemiluminescence (PCL) technique for the assay of astemizole was described. Under the optimized conditions, the PCL values responded linearly to the concentration of astemizole in the range 1.0 × 10^?3–3.0 µg/mL, with a detection limit of 7.0 × 10^?4 µg/mL. The relative standard deviation was 1.7% for 1.0 × 10^?2 µg/mL astemizole solution (n = 13). It was applied to the determination of astemizole in pharmaceutical preparations with satisfactory results.     

Chemiluminescence determination of barbituric acid using Ru(phen)(3)(2+)-Ce(IV) system

A chemiluminescence (CL) method for the determination of barbituric acid (BA) was proposed, which is based on the enhancement of BA to the CL intensity of Tris-(1,10-phenanthroline)ruthenium(II) (Ru(phen)₃²⁺)-cerium(IV) (Ce(IV)) system. The concentration of BA is proportional to the CL intensity in the range of 5.0×10⁻³-2.0 μg ml⁻¹. The detection limit is 6.9×10⁻⁴ μg ml⁻¹. The relative standard deviation (R.S.D.) of determining 11 samples containing 0.20 μg ml⁻¹ BA is 3.2%. This CL method has been successfully applied to the determination of BA in the synthetic samples. The mechanism of CL reaction was studied.     

流动注射后化学发光法测定异烟肼

本文发现了异烟肼在铁氰化钾-钙黄绿素化学发光反应体系中的后化学发光反应。优化了反应条件,建立了一种利用后化学发光反应测定异烟肼的流动注射化学发光分析法。方法的检出限为6×10-8g/mL, 相对标准偏差为1.8% (2.0×10-6 g/mL 异烟肼,n=11）,线性范围为2.0×10-7~1.0×10-5 g/mL。此法已用于异烟肼片剂中异烟肼含量的测定,结果与药典方法测定值一致。     

Flow Injection Chemiluminescence Determination of Isoniazid Using On-Line Electrogenerated Manganese(III) as Oxidant

A novel flow injection chemiluminescence (CL) system for the determination of isoniazid has been proposed. It is based on the direct CL reaction of isoniazid and Mn(III) in sulfuric acid medium. The unstable Mn(III) was on-line electrogenerated by constant current electrolysis. The CL emission intensity was linear with isoniazid concentration in the range 0.1–10 μg/mL; the detection limit was 3.2 × 10⁻² μg/mL. The whole process could be completed in 1 min with a relative standard deviation of less than 5%. The proposed method is suitable for automatic and continuous analysis and has been applied successfully to the analysis of isoniazid in pharmaceutical preparation.     

Determination of vitamin B<Subscript>12</Subscript> using a chemiluminescence flow system

A method to determine vitamin B₁₂ by measuring the chemiluminescence (CL) intensities using a flow injection (FI) system has been proposed. It is based on the catalytic effect of cobalt(II) in vitamin B₁₂ on the CL reaction between luminol and hydrogen peroxide in a basic medium. The increment of the CL intensity is proportional to the concentration of vitamin B₁₂ in the range 8.68–86.9 ng/mL (r ² = 0.9984) with a detection limit (3σ) of 0.89 ng/mL. The CL response is obtained in 10 s at a flow rate of 3.0 mL/min with a relative standard deviation (RSD) of less than 2.5% (n = 6). The method has been successfully applied to the determination of vitamin B₁₂ in pharmaceutical injections. The text was submitted by the authors in English.     

Determination of Riboflavin Using Flow Injection Inhibitory Chemiluminescence

ABSTRACT

A new flow injection method for the determination of riboflavin based on the inhibition of the intensity of chemiluminescence (CL) from the luminol-K₃Fe(CN)₆ system is described. While riboflavin mixed with K₃Fe(CN)₆, by the fast oxidation reaction between riboflavin and K₃Fe(CN)₆, K₄Fe(CN)₆ was generated, which then inhibited the CL reaction of K₃Fe(CN)₆ and luminol in alkaline aqueous solution. The CL emission was correlated with the riboflavin concentration in the range from 0.032 to 100 μg·ml?¹, and the detection limit was 0.01 μg·ml?¹ (3σ). A complete analysis could be performed in 2 min with a relative standard deviation of less than 2.2%. The influence of foreign species was studied and the method has been applied successfully to the determination of riboflavin in pharmaceutical samples, the recovery was from 98.0% to 102%.