Microdetermination of Molybdenum in Iron and Biological Samples by Adsorption Voltammetry

Abstract

Molybdenum has been determined by adsorption′voltammetry in a pH 2.40 buffer solution (0.005M N_aH₂PO₄-0.01M H₃PO₄). Utilizing the Strong adsorption of 12-molybdenum phosphate at a hanging mercury electrode, nanomole sensitivities are achieved. The derivative peak current is directly proportional to the concentration of molybdenum (VI) over the range of 5×10–9?2×10^?7M. The detection limit is 4×10^?9M.     

Bifunctional Ion‐Selective Electrode Based on C60‐Cryptand 22 for Silver and Iodine Ions

Fullerence C60‐cryptand 22 was prepared and successfully applied as the electric carrier in the PVC electrode membrane of a bifunctional ion‐selective electrode for cations, e.g., Ag⁺ ions as well as anions, e.g., I^? ions. The bifunctional ion‐selective electrode based on C60‐cryptand 22 can be applied as a Silver (Ag⁺) ion selective electrode with an internal electrode solution of 10^?3 M AgNO₃ in water (pH = 6.3), or as an Iodide (I^?) ion selective electrode with an acidic internal electrode solution of 10^?4 M KI_(aq) (pH = 2) in which the cryptand 22 is protonated, and the C60‐cryptand 22 is changed to C60‐Cryptand22–H⁺ and becomes an anionic electro‐carrier to absorb the I^? ion. The Ag⁺ ion selective electrode based on C60‐cryptand 22 gave a linear response with a near‐Nernstian slope (59.5 mV decade^?1) within the concentration range 10^?1‐10^?3 M Ag⁺_(aq). The Ag⁺ ion electrode exhibited comparatively good selectivity for silver ions, over other transition‐metal ions, alkali and alkaline earth metal ions. The Ag⁺ ion selective electrode with good stability and reproducibility was successfully used for the titration of Ag⁺_(aq) with Cl^? ions. The Iodide (I^?) Ion selective electrode based on protonated C60–cryptand22‐H⁺ also showed a linear response with a nearly Nernstian slope (58.5 mV decade^?1) within 10^?1 ‐ 10^?3 M I^? _(aq) and exhibited good selectivity for I^? ions and had small selectivity coefficients (10^?2–10^?3) for most of other anions, e.g., F^? , OH^?, CH₃COO^?, SO₄^2?, CO₃^2?, CrO₄^2?, Cr₂O₇^2? and PO₄^3? ions.     

Fading of a novel colorimetric receptor after recognizing H2PO4−

A novel selective and sensitive colorimetric receptor 1 (1, 10-phenanthroline-2, 9-dialdehyde bis-(-p-nitrophenylureasemicarbo-hydrazone)) based on urea showing distinctive color fading phenomenon towards H₂PO₄^? ion was reported. Fancifully, the recognition process of receptor 1 to H₂PO₄^? was not interfered by the existence of others anions. We have probed the binding mechanism of 1-H₂PO₄^? that H₂PO₄^? ion induced competitive hydrogen binding process via intramolecular hydrogen-bond by UV–vis, fluorescence, ¹H NMR titrations and ESI-MS experiments.     

The Determination of Non-Oxidizable Species Using Electrochemical Detection in Ion Chromatography

Abstract

The use of an electrochemical detector for the ion chromatographic detection of non-oxidizable anions such as F^?, PO₄ ^?3, NO₃ ^?, and SO₄ ^?2 is described. The electrochemical detector is placed in line after a fiber suppressor and responds to eluent pH changes as the dissociated acids pass through the detector. The intensity of the signal is dependent on the applied potential at the cell with 0.3V being an optimum. Minimum detection limits with a 0.10 mL sample injection volume are below 0.5 ppm for F^?, Cl^?, PO₄ ^?3, NO₃ ^?, and SO₄ ^?2. No adverse effects on the silver working electrode have been observed.     

Combined Intrinsic and Extrinsic Proton Conduction in Robust Covalent Organic Frameworks for Hydrogen Fuel Cell Applications

Developing new materials for the fabrication of proton exchange membranes (PEMs) for fuel cells is of great significance. Herein, a series of highly crystalline, porous, and stable new covalent organic frameworks (COFs) have been developed by a stepwise synthesis strategy. The synthesized COFs exhibit high hydrophilicity and excellent stability in strong acid or base (e.g., 12 m NaOH or HCl) and boiling water. These features make them ideal platforms for proton conduction applications. Upon loading with H₃PO₄, the COFs (H₃PO₄@COFs) realize an ultrahigh proton conductivity of 1.13×10^?1 S cm^?1, the highest among all COF materials, and maintain high proton conductivity across a wide relative humidity (40–100 %) and temperature range (20–80 °C). Furthermore, membrane electrode assemblies were fabricated using H₃PO₄@COFs as the solid electrolyte membrane for proton exchange resulting in a maximum power density of 81 mW cm^?2 and a maximum current density of 456 mA cm^?2, which exceeds all previously reported COF materials.     

Hydrothermal synthesis and structural characterization of two new reduced phosphomolybdates based on an organoamine template and copper ion

Two new compounds, (H₂en)₃(H₂enMe)₄(H₃O){Cu^I[Mo^V ₆O₁₂(OH)₃(HPO₄)(PO₄)₃]₂}?·?6H₂O (1) and (H₂enMe)₄{Cu^ICu^II[Mo^V ₆O₁₂(OH)₃(PO₄)(HPO₄)₂(H₂PO₄)]₂}?·?3H₂O (2), were hydrothermally synthesized and characterized by elemental analysis, IR, TGA, and single-crystal X-ray diffraction analysis. Crystallographic analysis reveals that 1 is constructed from cluster anions {Cu^I[Mo^V ₆O₁₂(OH)₃(HPO₄)(PO₄)₃]₂}^15?, protonated organic amines, and water molecules. Each cluster is bridged through hydrogen bonds to form a 3-D supermolecular structure. For 2, {Cu^I[Mo^V ₆O₁₂(OH)₃(PO₄)(HPO₄)₂(H₂PO₄)]₂}^11? are connected by Cu^II cations to form an infinite chain. The formation of 1 and 2 reveals that organoamines influence the structures of the crystals.     

Hydrothermal Synthesis,Crystal Structures and Characterization of Two Hydrogen Phosphates Templated by 4-Amino-2,2,6,6-tetramethylpiperidine

Abstract

Chemical preparations, crystal structures, thermal analyses, and IR spectroscopic studies are given for two new hydrogen phosphates templated by 4-amino-2,2,6,6-tetramethylpiperidine: (C₉H₂₂N₂)₂·(H₂PO₄)·(HPO₄)·(F)·H₂O (I) and (C₉H₂₂N₂)·(H₂PO₄)₂(II). The structures are determined by single crystal X-ray diffraction. Both compounds crystallize in the P2₁/c (N°14) monoclinic space group with the unit cell parameters: a = 14.856 (1) Å, b = 14.092 (2) Å, c = 14.7166 (9) Å, β = 118.434 (7)°, V = 2709.2 (4) Å ³, and Z = 4 for (I) and a = 9.803 (2) Å, c = 0.466 (2) Å, c = 15.640 (8) Å, β = 94.990 (4), V = 1598.68 (7) ų, and Z = 4 for (II).

The structure of I, refined to R = 0.042 and R_w = 0.067 for 6009 reflections (I ≥ 2σ (I)), exhibits infinite inorganic chains _∞((H₂PO₄)·(HPO₄)·(F)·H₂O)^4? linked together through weak hydrogen bonds to form layers onto which the diprotonated [C₉H₂₂N₂]^{2 +} amine molecules are anchored.

The structure of II, refined to R = 0.060 and R_w = 0.086 for 1435 reflections (I ≥ 2σ (I)), consists of _∞(H₂PO₄)^? (100) layers between which [C₉H₂₂N₂]²⁺ cations are inserted. A network of hydrogen bonds connects the different components. IR spectra of I and II show the characteristic bands of amine groups and phosphate anions.     

Pyrrole-based tetra-amide for hydrogen pyrophosphate (HP2O73−) and F− ions in sol-gel medium

A simple pyrrole-based tetra-amide 1 shows selective fluorescence sensing of HP₂O₇^3? over a series of other anions in CH₃CN by exhibiting excimer emission at ~450 nm. In DMSO:CHCl₃ (1:5 v/v), compound 1 forms gel that undergoes disintegration to sol in the presence of basic anions such as F^?, AcO^? and H₂PO₄^?. However, the gel state of 1 under a particular condition is observed to be selective to F^? over AcO^? and H₂PO₄^? anions. The recognition properties of the receptor have been studied by fluorescence, UV–vis and ¹H NMR spectroscopic methods.     

Highly Selective Thiocyanate Electrode Based on Bis‐bebzion Schiff Base Binuclear Copper(II) Complex as Neutral Carrier

Abstract

A highly selective polyvinyl chloride (PVC) membrane electrode, based on N,N′‐(aminoethyl)ethylenediamide bis(2‐benzoideneimine) binuclear copper(II) complex [Cu(II)‐AEBB] as neutral carrier, was prepared for thiocyanate (SCN^?) determination, which displays an anti‐Hofmeister selectivity sequence for a series of anions in the following order: SCN^?>ClO₄ ^?>Sal^? > I^?>NO₃ ^?>Br^?> Cl^?>NO₂ ^?>SO₃ ^2?>F^?>H₂PO₄ ^?>SO₄ ^2?. The electrode exhibited near‐Nernst response for SCN^? with a slope of –59.0 mV/decade over a wide concentration range (8.5×10^?7～6.8×10^?1 mol/L) with a detection limit of –5.0×10^?7 mol/L in pH 5.0 phosphate buffer solution at 25°C. Alternating current (AC) impedance and equivalent circuits were used to investigate the thiocyanate response mechanism of the membrane doped with [Cu(II)‐AEBB].     

Chromatographic Behaviour of Anions of Zr (IV) Molybdate Papers and Silica Gel ‘G’ Thin Layers

Abstract

Ion exchange potential of Zr (IV) molybdate and silica gel ‘G’ has been explored in paper chromatography and thin layer chromatographic studies for the separation of anions from one another. Several Important and difficult separations of anions have been achieved as a result of these studies. IO^? ₃ - BrO₃ ^?, Br^? - NO₂ ^?, IO₄ ^? - I^?, NO₂ ^? - NO₃ ^?, NO₃ ^? - BO₃ ^?, NO₃ ^? - BrO₃ ^?, PO₄ ^— - F^? and PO₄ ^— - IO₃ ^? are separations of practical Interest.     

The effect of activation technology on the electrochemical performance of calcium carbide skeleton carbon

Porous CaC₂-derived carbon (CCDC) was synthesized by one-step route from CaC₂ in a freshly prepared chlorine environment at lower temperature. As-prepared CCDC was activated by H₃PO₄, ZnCl₂, and KOH, respectively. The effects of the activation technology on the structure and morphology of CCDC were studied by X-ray diffraction, physical N₂ adsorption/desorption, and transmission electron microscopy. It has been found that the pore structure and specific surface area of CCDC are apparently improved after activation; the CCDC activated by KOH especially showed an excellent specific surface area of 1,100?m²?g^?1. The electrochemical performance of supercapacitors using activated CCDC as electrode active material was studied by cyclic voltammery, galvanostatic charge/discharge, and cycle life measurements. The results indicated that the CCDCs activated by H₃PO₄, ZnCl₂, and KOH revealed enhanced capacitances of 172.6, 198.1, and 250.1?F?g^?1 in 6?M KOH electrolyte, which were increased by 11.4, 27.8, and 61.2?% compared with the pristine CCDC (155?F?g^?1), respectively. Furthermore, the supercapacitors using all activated CCDCs as electrode active material exhibited excellent cycle stability, and the specific capacitance for all activated CCDC samples had nearly no change after 5,000 cycles.     

Epoxy-based oligomeric probe bearing naphthalene units for selective turn-OFF fluorescent sensing of fluoride anion

A simple epoxy-based oligomer 1 bearing naphthalene unit at the chain-ends is reported to be highly selective ON–OFF type fluorescent probe for fluoride anion. The titled oligomer displayed fluorescence quenching upon addition of F^?, resulting in selective detection of fluoride anion over other anions, such as AcO^?, Cl^?, Br^?, I^?, HSO₄^?, NO₃^? and H₂PO₄^? in CH₃CN. Fluorescence experiments suggest the significant influence of the oligomer chain on the sensitivity and selectivity of 1 towards fluoride anion.     

Synthesis,Crystal Structure,and Conductivity Investigation of a New Monophosphate: (2-CH3OC6H4CH2NH 3)H2PO4

Chemical preparation, crystal structure, thermogravimetric and differential analysis, solid state ³¹P MAS NMR characterization, and IR spectroscopic investigations are given for a new organic cation dihydrogenmonophosphate, (2-CH₃OC₆H₄CH₂NH₃)H₂PO₄. This compound is monoclinic C2/c, with unit cell parameters a = 27.740(8), b = 4.827(2), c = 16.435(3) Å, β = 93.79(2)°, V = 2196 (1) ų, Z = 8, and ρ = 1.422 g · cm^?3. The crystal structure has been determined and refined to R = 0.046 (Rw = 0.056), using 1,746 independent reflections with I > 3σ (I). Its atomic arrangement can be described by infinite polyanions [H₂PO₄] _n ^{n ?}, organized in ribbons alternating with organic cations. Strong hydrogen bonds connect the different components. Electrical conductivity measurements show that the [2-CH₃OC₆H₄CH₂NH₃]H₂PO₄ has a low ionic conductivity value at 403 K.     

A Nitron-Polyvinylbenzyl Chloride Polymer to Selectively Remove Oxidizing Anions from Non-Oxidizing Anions. Removal of NO3 − and NO2 − from Polluted Waters

Abstract

A nitron-polyvinylbenzyl chloride polymer was found to have a strong preference for oxidizing anions such as NO₃ ^?, NO₂ ^?, ReO₄ ^?, MnO₄ ^?, C1O₄ ^?, C1O₃ ^?, and Cr₂O₇ ⁼ but not for the non-oxidizing anions SO₄ ⁼, HSO₄ ^?, H₂PO₄ ⁼, HPO₄ ⁼, PO₄ ⁼, OH^?, CO₃ ⁼, HCO₃ ^?, F^?, C1^?, and Br^?.     

A molecular dynamics simulation of H<Subscript>3</Subscript>PO<Subscript>4</Subscript>, H<Subscript>2</Subscript>PO<Stack><Subscript>4</Subscript><Superscript>−</Superscript></Stack>, and the protonated form of N,N-dimethylformamide in liquid N,N-dimethylformamide

The molecular dynamics simulation method was for the first time used to study the structural and energy parameters of H₃PO₄, H₂PO₄⁻, and (DMFA)H⁺ (protonated dimethylformamide) in liquid N,N-dimethylformamide. The predominant orientation of the nearest neighbors of H₃PO₄, H₂PO₄⁻, DMFA, and (DMFA)H⁺ was determined from ranked distribution functions. The most probable structure of H-bonded complexes was obtained. It was shown that H₃PO₄ formed H-bonds with two DMFA molecules, and and (DMFA)H⁺ formed H-bonds with one molecule. The dependence of Coulomb interaction energies on the distance between H₃PO₄, H₂PO₄⁻, (DMFA)H⁺, and DMFA had the form of damped oscillations, as is characteristic of intermolecular interactions in pure DMFA. The molecular dynamics simulation of the H₂PO₄⁻-(DMFA)H⁺-DMFA ternary system showed a high probability of the formation of contact ion pairs.     

Anion Recognition Using Novel and Colorimetric Tweezer Receptors:1,3-Phenylenedi(carbonylhydrazone) in Aqueous-organic Binary Solvents

本文设计合成了2种新型的间苯二甲酰腙类钳形受体。在DMSO和DMSO-H2O混合溶液中,通过紫外可见光谱分别考察了受体分子3a对F-, Cl-, Br-, I-, AcO-, HSO4-, H2PO4-和ClO4-的相互作用。结果表明,在DMSO溶液中,受体3a对F-,CH3COO-和H2PO4-有显著识别效果,溶液颜色由无色变为黄色,实现裸眼检测。在15%H2O-85%DMSO含水体系中,3a可高选择性识别CH3COO-。1H NMR滴定表明过量F-的加入使受体分子3a发生脱质子作用,探讨了主客体之间的作用机理。并直接用于水相中无机醋酸盐的直接显色检测。     

Structural and Chemical Peculiarities of Natural Apatites as Revealed by Epr Spectra

Abstract

Apatite-Ca₅ (PO₄)₃ (F,Cl,OH) is a poligenic mineral widely-spread in nature. A number of important properties of this complex matrix was found by EPR studies. It was shown, that the paramagnetic centres can be used as original probe of crystallostructural and chemical peculiarities which are formed at a) isomorfous substitution, b) deflection of composition from stoichiometry. In natural apatites isomorfous admixtures of Mn²⁺, Cu²⁺, Fe³⁺, V⁴⁺ ions in CaI, CaII position are registered. The distribution regularities of the admixtures between two Ca-positions are considered. If the Ca-cations are substituted isomorphically by actionoide ions, PO^3- ₃-anions are destructed, namely one of the four oxygen atoms comes off and PO^? ₃ -group is formed. The capture of electron by PO^? ₃ -fragment under the effect of ionizing radiation results in the formation of paramagnetic PO^2- ₃-centre of electron type with peculiar EPR parameters. Depending on the P-OII(I) or P-OIII(III) the PO^3- ₄ -anion bond, which is broken, as well as on the nature of substi-tuting actinoide ion (U or Th) the variety of PO^2- ₄ -centres (four type) with different EPR parameters could be registered. A number of radical i.ons in the position PO^3- ₄ -anion-CO^3- ₃, CO^? ₃, SO^? ₃, SiO^? ₃ are observed. The spectrum of H° is identified in the group of nonstoichiometrical apatites with Ca/P <1,67. This spectrum can be used as the indicator of calcium deficiency and the presence of HPO^2- ₄ -group in the structure. The organic radical HCO is registered in the non-stoichiometric carbonate-apatites with phosphorus deficiency (Ca/P > 1,67). The presence of different ion-halogen (F, C1, OH) and oxygen in the form 0^? at the axes G₃ leads to the formation of different complexes: F^? -0^? -F^?, cl^? -O^? cl^? -O^? -Cl^? F^? -O^?-Cl^?, OH^? -O^?-. The EPR-spectrs parameters of the above-mentioned centres are presented.     

Synthesis,Physical Properties,and Anion Recognition of Two Novel Larger Azaacenes: Benzannelated Hexazaheptacene and Benzannelated N,N′‐Dihydrohexazaheptacene

Two novel larger azaacenes with six or ten N atoms in their backbones, benzannelated 9,11,13,22,24,26‐hexazatetrabenzo[a,c,l,n]heptacene ( HATBH , 1 ) and benzannelated 9,26‐dihydro‐9,11,13,22,24,26‐hexaza‐tetrapyrido[3,2‐a: 2′,3′‐c: 3′′,2′′‐l: 2′′′,3′′′‐n]heptacene ( DHATPH, 2 ), have been successfully synthesized in two steps. The theoretical band gaps estimated through DFT calculations for HATBH ( 1 ) and DHATPH ( 2 ) are 1.949 eV and 2.278 eV, which are close to the experimentally obtained optical band gaps (2.14 eV and 2.39 eV). Interestingly, HATBH ( 1 ) can act as efficient anion sensor for F^? and H₂PO₄^?, while DHATPH ( 2 ) selectively responds to F^? among the ten different anions used (F^?, Cl^?, Br^?, I^?, PF₆^?, HSO₄^?, NO₃^?, BF₄^?, AcO^?, and H₂PO₄^?). Our synthetic strategy could offer a promising and easy way to obtain even larger azaacenes.     

A Fluorescent Chemosensor for Dihydrogen Phosphate Ion Based on 2‐[2‐Hydroxy‐4‐(diethylamino) phenyl]‐1H‐imidazo[4,5‐b]phenazine‐Fe3+ Ensemble

A long wavelength emission fluorescent (612 nm) chemosensor with high selectivity for H₂PO₄^? ions was designed and synthesized according to the excited state intramolecular proton transfer (ESIPT). The sensor can exist in two tautomeric forms ('keto' and 'enol') in the presence of Fe³⁺ ion, Fe³⁺ may bind with the 'keto' form of the sensor. Furthermore, the in situ generated GY‐Fe³⁺ ensemble could recover the quenched fluorescence upon the addition of H₂PO₄^? anion resulting in an off‐on‐type sensing with a detection limit of micromolar range in the same medium, and other anions, including F^?, Cl^?, Br^?, I^?, AcO^?, HSO₄^?, ClO₄^? and CN^? had nearly no influence on the probing behavior. The test strips based on 2‐[2‐hydroxy‐4‐(diethylamino) phenyl]‐1H‐imidazo[4,5‐b]phenazine and Fe³⁺ metal complex ( GY‐Fe³⁺ ) were fabricated, which could act as convenient and efficient H₂PO₄^? test kits.     

Comparative Study of Hypophosphite H2PO2^- Adsorption on Ni（111） and Ag（111） Surfaces by DFT

Surface structures and electronic properties of hypophosphite H2PO2^- on Ni（111） and Ag（111） surfaces were investigated by means of density functional theory at B3LYP/6-31 ＋ ＋G（d,p） level. The most stable structure was that in which the H2PO2^- adsorbs with its two P--O bonds faced to the substrate surface. The results of the Mulliken population analysis showed that because of the subtle difference of electron configuration, the adsorption energy was larger on the Ni surface than on the Ag surface, and the amounts of both donation and back donation were larger on the Ni（111） surface than on the Ag（111） surface. There were more negative Mulliken charge transfer from H2PO2^- to substrate clusters on Ni surface than on Ag surface and more positive Mulliken charges on P atom in Ni4H2PO2^- than in Ag4H2PO2^-, which means that P atom in Ni4H2PO2^- is easily attacked by a nucleophile such as OH . Thus, H2PO2^- is more easily oxidated on Ni（111） surface than on Ag（111） suface. These results indicated that the silver surface is inactive for the oxidation reaction of the hypophosphite anion.