新型杯芳烃为载体的铅离子选择电极

报道了5,11,17,23-四（1,1-二甲基乙基）-25,27-二羟基-26,28-二[（2-丙酰胺）乙氧基]杯[4]芳烃1的合成及以此化合物为载体研制了PVC膜铅离子选择电极。研究了不同极性的膜增塑剂和亲脂性阴离子位点对铅离子选择电极响应性能的影响,测定了铅离子选择电极的性能。铅离子选择电极对铅离子表现出优良的能斯特响应和高选择性,能在pH4.0-6.5的范围内使用,该电极可作为电位滴定的指示电极。     

A Coated Graphite Thorium‐Ion Selective Potentiometric Sensor Based on a Calix[4]arene Bearing Phosphoryl Groups

5,11,17,23‐Tetra‐tert‐butyl‐25,26,27,28‐tetrakis(diphenylphosphinoylmethoxy)calix[4]arene ( 1 )has been used for the preparation of a graphite coated thorium ion‐selective electrode (Th⁴⁺‐ISE). The plasticized PVC membrane containing 30% PVC, 58% ortho‐nitrophenyloctylether (NPOE), 4% sodium tetraphenylborate (NaTPB) and 8% ionophore was directly coated on a graphite rod. This sensor gave good Nernstian responses with a slope of 15.5 ± 0.1 mV/decade over a concentration range of 1 × 10^?5 ?1 × 10^?3 M of thorium ions with a limit of detection of 7.9 × 10^?6 M. The dynamic response time of the electrode to achieve a steady potential was found to be about 15 seconds. The potential of the prepared sensor was independent of the pH variation in the range 2.3–4.0. The selectivity relative to several mono‐, di‐ and tri‐valent metal ions, i.e. Li⁺, Na⁺, K⁺, Ag⁺, NH₄⁺, Sr²⁺, Mn²⁺, Fe²⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺, La³⁺, Sm³⁺, Dy³⁺, Er³⁺ and Y³⁺ was examined. This electrode can be used for 6 months without any considerable divergences in the potential response. The sensor was successfully used as an indicator electrode for the potentiometric titration of a thorium solution using a standard solution of EDTA.     

Nickel Ion-Selective PVC Membrane Electrode Based on a New t-Octyl-Calix[6]arene Derivative

This study presents a PVC membrane based on 5,11,17,23,29,35-Hexakis-t-octyl-37,38,39,40,41,42-hexakis(N-phenylthiocarbamoylmethoxy)calix[6]arene which is used as an electroactive substance. The electrode reveals a Nernstian response for Ni²⁺ over a wide pH range with a slope of linear portion (5×10^–6–1×10^–2M, R=0.988) of 29.75±0.2mV·decade^–1 at 25°C. The electrodes sensitivity is enhanced upon the introduction of sodium tetraphenylborate into the membrane as a negatively charged lipophilic additive. The selectivity coefficients of various interfering ions were determined using the fixed interference method (FIM). The membrane reveals good selectivity for nickel ions over the other metal ions investigated. The lifetime of this electrode is about one month. This electrode has been applied to the determination of nickel ions in wastewater from the electroplating industry.     

Poly(Vinyl Chloride) Containing Dibenzo-18-crown-6 as an Ion-Selective Membrane for Hyamine 1622

Abstract

A poly(vinyl chloride) membrane ion-selective electrode for the Hyamine 1622 cation is proposed. The active substance of the electrode was the neutral carrier dibenzo-18-crown-6 and di-iso-octylphthalate was used as plasticizer. The electrode had a Nernstian behaviour between 6.0 × 10^?6 and 1.6 × 10^?3 mol/dm³, a pH working range of 2 – 12 and high selectivity towards inorganic cations. Among the organic cations tested, only those having surfactant properties did interface. The electrode was suitable for determining the critical micelle concentration and as end-point detector in the potentiometric titration of the cationic surfactants.     

A Lead‐Selective Membrane Electrode Based Upon a Phosphorylated Hexahomotrioxacalix[3]Arene

Solvent extraction of a mixture of Pb^II, Mn^II, Fe^III, Co^II, Ni^II and Cd^II in aqueous perchlorate medium by a phosphorylated hexahomotrioxacalix[3]arene (calix‐3) in dichloromethane shows a significant selectivity towards lead ions. The ligand can also be incorporated into a membrane to provide a new lead ion‐selective electrode (Pb^II‐ISE). A plasticized PVC membrane containing 30% PVC, 53.5% ortho‐nitrophenyloctylether (NPOE), 4.5% sodium tetraphenylborate (NaTPB) and 12% ionophore was directly coated on a graphite rod. This sensor gave a good Nernstian response of 29.7 ± 0.7 mV decade^?1 over a concentration range of 1 × 10^?8 – 1 × 10^?4 M of lead ions, independent of pH in the range 3‐7, with a detection limit of 0.4 × 10^?8 M. The dynamic response time of the electrode to achieve a steady potential was very fast and found to be less than 7 s. The selectivity relative to Ag⁺, NH₄⁺, Li⁺, Na⁺, K⁺, Ca²⁺, Sr²⁺, Ba²⁺, Mn²⁺, Fe²⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺, Fe³⁺, La³⁺, Sm³⁺, Dy³⁺, Er³⁺, Y³⁺ and Th⁴⁺ was examined. The electrode exhibits adequate stability with good reproducibility (with a slope of 29.6 ± 1.5 mV for 8 weeks). The characteristics of the sensor are compared with those of a tetraphosphorylated calix[4]arene (calix‐4) based Pb^II‐ISE, reported recently. The electrode was successfully used as an indicator electrode for a potentiometric titration of a lead solution using a standard solution of EDTA. The applicability of the sensor for lead ion measurements in various synthetic samples was also investigated.     

杯[4]芳烃衍生物对Pb2＋的液膜传输动力学

以3类含不同基团的杯[4]芳烃衍生物作为离子载体在H2O-CHCl3-H2O液膜传输体系下分别对Pb2＋进行液膜传输实验. 简要讨论了以杯[4]芳烃衍生物作为离子载体对Pb2＋液膜传输的动力学机理. 重点研究了不同载体种类, 载体浓度, 搅拌速度, 传输时间等因素对Pb2＋传输的影响. 实验结果表明: 以含Br原子的杯[4]芳烃衍生物和含S原子的杯[4]芳烃衍生物作为离子载体对Pb2＋有明显的传输效果. 可以用本文的动力学模型来描述整个传输体系的动力学特性.     

查尔酮冠醚PVC膜钾离子选择性电极的初步研究

查尔酮冠醚ＰＶＣ膜钾离子选择性电极的初步研究李廷盛，蔡汉临，王传林，张建明，魏旭东，胡宏纹（华中师范大学化学系武汉４３００７０））（南京大学化学系南京）关键词查尔酮冠醚ＰＶＣ膜，钾离子电极，性能钾离子在生物细胞膜内外的浓度梯度对生物膜的能量传输等起着...     

Response Characteristics of Copper‐Selective Polymer Membrane Electrodes Based on a Newly Synthesized Macrocyclic Calix[4]arene Derivative as a Neutral Carrier Ionophore

A novel macrocyclic calix[4]arene derivative was examined as an ionophore for ion‐selective polymeric membrane electrode toward Cu⁺² ions. The sensor showed a near Nernstian response for Cu(II) ions over a concentration range from 8.1×10^?6 to 1.0×10^?2 mol L^?1 with a slope of 34.2±0.4 mV per concentration decade in an acidic solution (pH 5). The limit of detection was 0.47 µg mL^?1. It had a response time of <20 s and can be used for at least 3 months without any divergence in potentials. The influence of plasticizer as well as the amount of lipophilic anionic site additive in the sensing membrane was discussed. It was shown that membrane electrodes formulated with the ionophore and appropriate anionic additive exhibited enhanced potentiometric response toward Cu²⁺ over all other cations tested. Since selectivity toward Cu²⁺ ions is decreased in the presence of high amount of the anionic additive, the ionophore can function as neutral carriers within the organic membrane phase. Validation of the assay method revealed good performance characteristics, including long life span, good selectivity for Cu²⁺ ions over a wide variety of other metal ions, long term response stability, and high reproducibility. The sensors were used for direct measurement of copper content in different rocks collected from different geological zones. The results agreed fairly well with data obtained using atomic absorption spectrometry.     

Influences of Hard Donor on Cation Selectivities Closing to Soft Selenium Donor in Tweezer-like Calix[4]arene Receptors

Three novel 25,27-dihydroxy-26,28-bis(3-benzylselenopropoxy)-5,11,17,23-tetra-tert-butylcalix[4]-arene (2),25,27-dihydroxy-26,28-bis[3-(2-hydroxyethylseleno)propoxy]-5,11,17,23-tetra-tert-butyl-calix[4]arene (3) and 25,27-dihydroxy-26,28-bis(3-propylselenoproppxy)-5,11,17,23-tetra-tert-butyl-calix[4]arene (4) were synthesized for the comparison of their ion-selectivity in ion-selective electrodes (ISE). X-ray structure of the CH/π complex of 4.CH2Cl2 was elucidated. ISEs based on 2-4 as neutral ionophores were prepared, and their selectivity coefficients for Ag (logKAg,M^pot) were investigated against some main group metal ions and transition metal ones using the fixed interference method (FIM). These ISEs showed excellent Ag^ selectivity over most of the interfering cations examined. It is evident that the stronger Hg^2 interference may not be produced while hard donors (hydroxy) are close to the soft selenium donors.     

硒功能化杯芳烃载体银离子选择性膜电极的研究

合成6个硒功能化杯芳烃为载体,采用双层夹心膜电位法直接测定了溶剂聚合物膜中载体与金属离子生成的络合物生成常数。制备并考察了以硒功能化杯芳烃为载体的银离子选择性电极的性能,发现以载体6为银离子选择性电子的载体,制成的膜电极,用作Ag^ 电位滴定Cl^-的指示电极,效果最佳。     

硫代杯[8]芳烃衍生物的合成及其对金属离子的选择性识别研究

在丙酮溶液中以碳酸铯为催化剂,以硫代杯[8]芳烃(thiacalix[8]arene,TC8A)和N,N-二乙基-2-氯乙酰胺为底物,对TC8A的下缘进行修饰合成了一种新的TC8A衍生物--硫代杯[8]芳烃二乙基乙酰胺[TC8A-CH2CON(CH2CH3)2].对含有9种金属离子的汽车尾气净化催化剂溶液进行萃取研究表明,在pH为3.0的萃取液中TC8A对其中的钯离子具有最高的选择性萃取能力,萃取率可达99.3%,TC8A-CH2CON(CH2CH3)2对其中的锆离子具有最高的选择性识别能力,萃取率可达96.7%.     

Amide and Acyl‐Hydrazine Functionalized Calix[4]arenes as Carriers for Hydrogen Phosphate Selective Electrodes

Anion‐selective solvent polymeric membrane based on hydrogen bond‐forming, neutral ionophores with amide or acyl‐hydrazine groups are described. The use of the two calix[4]arenes results in anion‐selective electrodes with a selectivity for phosphate. The electrodes of the optimum characteristic have the composition of 1 wt% ionophore, 66 wt% o‐NPOE, 33 wt% poly (vinyl chloride) (PVC) and TDMACl (15 or 30 mol% relative to the ionophore 1 and 2 , respectively). The optimized membrane electrodes show Nernstian responses towards monohydrogen phosphate (?29.1 and ?29.3 mV/decade) based on ionophore 1 and 2 , respectively, in a wide concentration range (1.0×10^?5 to 1.0×10^?2 or 1.0×10^?5 to 1.0×10^?1 M). The selectivity coefficients are determined with the fixed interference method and the activity ratio method. The electrodes display an anti‐Hofmeister series selectivity pattern and highly selective for HPO₄^2? over Cl^?, Br^?, CH₃COO^?, NO₃^? and SO₄^2?. The lifetime of the electrodes is at least 1 month and their response time is found to be 25 s. The proposed sensors could be put to analytical use both by direct potentiometry as well as potentiometric titration.     

PVC膜离子选择电极检测下限的优化

价格低廉、携带方便、适用浓度宽、操作简单快捷、能耗低的离子选择电极在医院、分析实验室、野外等领域得到了越来越广泛的应用。尽管如此,由于PVC膜中存在的离子流严重破坏了更低检测下限的获取,限制了离子选择电极的进一步发展。因此,本文从减小甚至消除PVC膜中存在的离子流角度出发,系统论述了优化PVC膜离子选择电极检测下限的原理和优良策略,根据收集归纳的大量数据定量阐述传感膜组成的优化、电极组装和调制、应用旋转电极以及电流极化处理等对检测下限的优化提升作用,进一步总结出各种方法的改善规律,分析它们的优势和面临的问题。提出在PVC铸膜液中要突破传统配方,减小增塑剂和离子交换剂用量,以抑制传感膜两侧的离子流,同时外加电流补偿处理等也是降低电极检测下限的有效方法,对检测下限的改善最好的可降低5个数量级。这一总结为PVC膜离子选择电极的高性能化明确了研究方向。     

Calix[4]resorcinarene Ionophore in the Ion-Selective Electrodes with Plasticized Poly(vinylchloride) Membranes

Synthetic ionophore calix[4]resorcinarene was incorporated into the poly(vinyl chloride) (PVC) plasticized membrane of an ion-selective electrode (ISE). Calixarene interactions with quaternary ammonium and alkaline metals cations in the organic and water-organic media were carefully investigated by various authors. We studied the effects of choline and Na⁺ cations present in the working solution on the ionophore which was incorporated into a membrane phase. Due to the pH sensitivity of the ionophore, a study was undertaken in a wide range of pH values. The different characteristics of calix[4]resorcinarene interactions with these cations were discovered by the ISE with the PVC plasticized membrane containing this ionophore, which respond to both the choline and Na⁺ cations due to the variation of working solution pH.     

杯[4]芳烃四丁醚的选择性硝化

硝化反应;杯[4]芳烃四丁醚的选择性硝化     

Selective Electrochemical Recognition of o-Phenylenediol by a Novel Calix[4]arene Derivative

A new type of calixarene-modified electrode has been prepared by directly coating the surface of a glassy carbon electrode with tetrahydrofuran solution containing 25,26,27,28-tetra-（3-amidino thiopropoxy）-5,11,17,23-tetratert-butylcalix[4]arene, and applied to the investigation of electrochemical behavior of phenylenediols. The results showed that the modified electrode could selectively recognize o-phenylenediol, making the over-potential of o-phenylenediol dropped and peak current increased greatly. The anodic peak current is proportional to the concentration of o-phenylenediol in the range of 1.0×10^-5-1.0×10^-4 mol·L^-1 with the detection limit （SIN=3） of 1.0×10^-7 mol·L^-1. The recognizing mechanism, including electrochemical process and binging sites, was also discussed using voltammetry.     

Ion Selective Electrodes Based on Brilliant Green Tetrathiocyanatezincate(II)

Abstract

Liquid state, heterogeneous silicone rubber and carbon paste electrodes based on Brilliant green tetrathiocyanatozincate(II) have been prepared and studied. The liquid state electrode, consisting of a 10^?3 M solution of Brilliant green tetrathiocyanatozincate(II) in o-dichlorobenzene supported on lightly cross-linked natural rubber, was the most satisfactory. This electrode responded rapidly when placed in 10^?4 to 10^?1 M solutions of zinc containing a twenty-fold excess of thiocyanate. The potential concentration slope (-29.5 mV per decade change in concentration) was that 2-expected for response to Zn(SON)₄ ²-. The silicone-rubber and carbon paste electrodes also gave near-Nernstian response, but responded more slowly.     

Shaping calixarene frameworks. Synthesis and structure of a calix[8]arene containing three bridging phosphate units

The reaction of p-tert-butylcalix[8]arene with PCl₅, followed by hydrolysis and subsequent esterification with triethyl orthoformate afforded a triphosphate involving all phenolic oxygen atoms of the calixarene framework. As revealed by an X-ray diffraction study, the presence of two μ₃-(O,O,O) and one μ₂-(O,O) bridging phosphoryl groups results in an unusual lengthening of the calix[8]arene loop (longest OO separation: 13.9 Å)     

Determination of Hg(II) ions in water samples by a novel Hg(II) sensor,based on calix[4]arene derivative

A PVC membrane electrode for Hg(II) ions, based on a new cone shaped calix[4]arene (L) as a suitable ionophore was constructed. The sensor exhibits a linear dynamic in the range of 1.0 × 10^?6–1.0 × 10^?1 M, with a Nernstian slope of 29.4 ± 0.4 mV decade^?1, and a detection limit of 4.0 × 10^?7 M. The response time is quick (less than 10 s), it can be used in the pH range of 1.5–4, and the electrode response and selectivity remained almost unchanged for about 2 months. The sensor revealed comparatively good selectivity with respect to most alkali, alkaline earth, and some transition and heavy metal ions. It was successfully employed as an indicator electrode in the potentiometric titration of Hg²⁺ ions with potassium iodide, and the direct determination of mercury content of amalgam alloy and water samples.