Electrochemical Determination of Copper(II) in Water Samples Using a Novel Ion-Selective Electrode Based on a Graphite Oxide–Imprinted Polymer Composite

A novel copper(II)-selective electrode based on graphite oxide/imprinted polymer composite was developed for the electrochemical monitoring of copper(II) (Cu²⁺) ions. The electrode exhibited highly selective potentiometric response to Cu²⁺ with respect to common alkaline, alkaline earth and heavy metal cations. The composite composition studies indicated that the most suitable composite composition performing the most promising potentiometric properties was 20.0% ionophore (Cu²⁺-ion imprinted polymer), 10.0% paraffin oil, 5.0% multiwalled carbon nanotubes, and 65.0% graphite oxide. The fabricated electrode exhibited a linear response to Cu²⁺ over the concentration range of 1.0?×?10^??6–1.0?×?10^??1?M (correlation coefficient of 0.9998) with a sensitivity of 26.1?±?0.9?mV decade^??1. The detection limit of the fabricated electrode was determined to be 4.0?×?10^??7?M. The electrode worked well in the pH range of 4.0–8.0. The electrode had stable, reversible and fast potentiometric response (3?s). In addition, the electrode had a lifetime of more than 1 year. The analytical applications of the proposed electrode were performed using as an indicator electrode for the potentiometric titration of Cu²⁺ with ethylene diamine tetraacetic acid solution and for the determination of Cu²⁺ of spiked river, dam, and tap water samples. The obtained results for potentiometric titration and water samples were satisfactory.     

Novel Copper(II)‐Selective Membrane Electrode Based on a New Synthesized Schiff Base

A PVC membrane electrode for copper(II) ion based on a recently synthesized Schiff base as a suitable ion carrier was constructed. The electrode exhibits a Nernstian slope of 28.3 ± 0.6 mV per decade of Cu²⁺ over a wide concentration range of 7.0 × 10^?6‐2.6 × 10^?2 M with a detection limit of 5.0 × 10^?6M in the pH range of 4.2–5.8. The response time is about 10s and it can be used for at least 1 month without any considerable divergence in potential. It was successfully applied as an indicator electrode in the potentiometric titration of copper ions.     

Copper (II) Sensor Based on a Cephaloridine Antibiotic PVC Matrix

ABSTRACT

A poly (vinyl chloride) (PVC) based membrane of cephaloridine as a novel ionophore exhibits good potentiometric response for Cu²⁺ over a wide concentration range (10^?5-10^? M) with a slope of 28.5 mV per decade. The detection limit is 3.5 × 10^?6 M. The response time of the sensor is < 60 s. The electrode has been used for a period of one month and exhibits good selectivity towards Cu²⁺ in comparison to alkali, alkaline earth, transition and heavy metal ions, with no interference caused by Pb²⁺ Cd²⁺ and Fe²⁺ which are known to interfere with many other copper electrodes. The electrode can be used in the pH range from 4.0 to 6.5 and it can also be used in partially non-aqueous medium having up to 10 (v/v) non aqueous content and in the presence of cationic surfactants at concentrations less than 10^?3 M.     

Stability of Ultradisperse Copper in a Sulfo Cation Exchanger Matrix

The recrystallization of ultradisperse copper chemically deposited onto a sulfo cation exchanger matrix was studied by the potentiometric method. The stationary value of the electrode potential of the copper-sulfo cation exchanger composite was established during a long period of time, which depended on the ionic form of the composite (H⁺, Cu²⁺, or Na⁺), solution composition (CuSO₄, H₂SO₄, and Na₂SO₄), and solution concentration. Recrystallization was favored by copper(II) counterions, which entered the composite as a result of ion exchange, nonexchange absorption of copper sulfate, or preliminary composite transformation into the Cu²⁺ form. In the quasi-equilibrium state, the concentration of copper(II) counterions was maintained at a high level by the Donnan interfacial potential. At all the copper(II) sulfate concentrations used, the potential of the Cu²⁺/Cu ion—metal pair in the ion-exchange matrix remained at virtually the same level, which was indicative of the stable state of copper particles. In the absence of an external source of copper ions, recrystallization was significantly hindered; therefore, the potential exhibited only a slight drift. Copper ions formed in the solution of small crystals were localized in the vicinity of ionogenic matrix centers, which decreased the mobility of these particles as counterions; therefore, the dispersity of particles remained unchanged.     

Copper Incorporated [Me2(15)dieneN4] Macrocyclic Complex for Fabrication of PVC based Membrane Electrode for Copper

Copper (II) complex of 2,4-dimethyl-1,5,9,12-tetraazacyclopentadeca-1,4-diene, [Me₂(15)dieneN₄] was synthesized and used in the fabrication of Cu²⁺ – selective ISE membrane in PVC matrix. The membrane having Cu(II) macrocyclic complex as electroactive material along with sodium tetraphenyl borate (NaTPB) as anion discriminator. Dibutyl phthalate (DBP) as plasticizer in poly(vinyl chloride) (PVC) matrix was prepared for the determination of Cu²⁺. The best performance was observed by the membrane having Cu(II) complex–PVC–NaTPB–DBP with composition 1:5:1:3. The sensor worked well over a concentration range 1.12 × 10⁻⁶ M–1.0 × 10⁻¹ M between pH 2.1–6.2 and a fast response time 10±2 s and a lifetime of 6 months. Their performance in partially non-aqueous medium was found satisfactory. Electrodes exhibited excellent selectivity for Cu²⁺ ion over other mono-, di-, trivalent cations. It can also be used as indicator electrode in the potentiometric titration of Cu²⁺ against EDTA as well as in the determination of Cu²⁺ in real samples.     

New Copper(II) Ion-Selective Membrane Electrode Based on Erythromycin Ethyl Succinate as a Neutral Ionophore

Abstract

The potentiometric response characteristics of a new copper(II) ion-selective PVC membrane electrode based on erythromycin ethyl succinate (EES) as ionophore were investigated. The electrode exhibited a Nernstian response to Cu²⁺ ions over the activity range of 1.5 × 10^?2 to 2.0 × 10^?6 mol L^?1 with a limit of detection of 6.3 × 10^?7 mol L^?1. Stable potentials were obtained in the pH range of 5.5–6.5. The potentiometric selectivity coefficients were calculated by using fixed interference method and revealed no important interferences except for Ag⁺. This electrode was successfully applied as an indicator electrode in determination of copper ions in real water samples.     

Potentiometric Characterization of Telomerase Activity Using a Copper(ii)-pyrophosphate Complex with a Copper ion-selective Electrode

A novel potentiometric sensing platform was designed for real-time electronic monitoring of telomerase activity using a copper(II) ion-selective electrode (Cu-ISE). The target-induced coordination of pyrophosphate ion with copper ion (Cu²⁺) was utilized for the detection of the enzyme activity. Upon telomerase introduction, a DNA primer was elongated in the presence of deoxyribonucleoside triphosphates, accompanying formation of the by-product (pyrophosphate ion; P₂O₇^4-). The generated pyrophosphate ions chemically coordinated with free copper ions to form the copper(II)-pyrophosphate complex, thereby resulting in a decrease in the number of free copper ions present in solution. With the addition of telomerase, the electrode potential on the Cu-ISE increased relative to the background signal. The results indicated that the copper(II)-pyrophosphate system exhibited good potentiometric response for the detection of telomerase activity, and allowed the determination of the analyte in HeLa cell extract at concentrations as low as 36 cells mL^?1. Moreover, the Cu-ISE-based sensing platform afforded good reproducibility, thus representing a useful approach for practical use in quantitative telomerase activity assays.     

Analytical Study of New Creatininium and Tetramethyl-ammonium Cation Selective Membrane Electrodes

Abstract

Two new liquid membrane electrodes which respond to creatininium and tetramethylammonium cations are described. The creatininium cation electrode exhibits rapid and near Nernstian response to creatininium cation activity, at pH 3, in the 10^?3?10^?1 mol/L range. The useful concentration range extends to 10^?4 mol/L. The tetramethyl-ammonium cation electrode exhibits rapid and near Nernstian response to tetramethylammonium cation activity, at pH 2–11.5, in the 2x10^?5? 10^?1 mol/L range. Major interferences for the creatininium electrode are Na⁺, K⁺, NH⁺ ₄ and creatine. The pK_a of the creatininium cation was calculated. A method is described for the potentiometric precipitation titration of tetramethylammonium cation with sodium tetraphenylboron. Amounts of tetramethylammonium in the range 20–200 μol have been determined using Gran's plots, with an average error of about 0.6%.     

Highly Sensitive Membrane Electrode Based on a Copper(II)-bis(N-4-Methylphenyl-Salicyldenaminato) Complex for the Determination of Chromate

A highly sensitive polyvinyl chloride (PVC) membrane electrode, based on copper(II)-bis(N-4-methylphenyl-salicyldenaminato) complex, (CuL₂), as a carrier was reported for the determination of chromate ion. The influence of membrane composition, pH, and possible interfering anions on the response of the ion selective electrode was investigated. The sensor exhibited a Nernstian slope of 29.7 mV per decade when the chromate concentration was varied between 2.0 × 10^?7–1.50 × 10^?2 M in a wide pH range (6.0 to 9.0). The detection limit of the ion selective electrode was 9.2 × 10^?8 M. The proposed sensor was used for at least 4 months without any considerable divergence in potential. It was applied as indicator electrode in potentiometric titration of chromate ion with Pb²⁺ and Tl⁺.     

Facile Synthesis and Characterization of 5-[(3-Methylthiophene-2-yl-methyleneamino)]-2-mercaptobenzimidazole and Its Potentiometric Sensor Application in a Polyvinyl Chloride Membrane for the Determination of Copper(II)

A novel Schiff base designated as 5-[(3-methylthiophene-2-yl-methyleneamino)]-2-mercaptobenzimidazole was synthesized and characterized. A polyvinyl chloride-membrane potentiometric copper(II)-selective sensor was prepared by using the synthesized 5-[(3-methylthiophene-2-yl-methyleneamino)]-2-mercaptobenzimidazole compound. The prepared polyvinyl chloride-membrane copper(II)-selective sensor exhibited very good selectivity and sensitive potentiometric response towards copper(II) ions compared to a wide variety of other cations. The sensor had a fast response time of <5?s, and showed a linear Nerstian behavior to copper(II) ions over a wide concentration range from 1.0?×?10^?5 to 1.0?×?10^?1 mol L^?1 with a slope of 29.2?±?0.7 and correlation coefficient of 0.9998. The prepared polyvinyl chloride-membrane copper(II)-selective sensor was used for 14 weeks without any significant change in its potentiometric response. The potentiometric response of the developed sensor was highly repeatable. Additionally, the developed sensor was used as an indicator electrode for the potentiometric titration of copper(II) ion with ethylenediaminetetraacetic acid. The sensor was also successfully applied to the direct determination of copper(II) ions in tap water, river water, and dam water samples.     

Copper(II)-selective membrane electrode based on a recently synthesized naphthol-derivative Schiff’s base

A PVC membrane electrode for copper(II) ions based on a recently synthesized naphthol-derivative Schiff’s base as membrane carrier was prepared. The sensor exhibits a Nernstian response for Cu²⁺ ions over a wide concentration range (5.0 × 10^–6–5.0 × 10^–2 mol/L) with a detection limit of 3.1 × 10^–6 mol/L (0.2 μg/mL). It has a very short response time of about 5 s and can be used for ¶3 months without any divergence in potential. The proposed electrode revealed good selectivities over a wide variety of other cations including alkali, alkaline earth, transition and heavy metal ions and could be used in a pH range of 4.0–7.0. It was successfully applied to the direct determination and potentiometric titration of copper ion.     

Poly(vinyl chloride) membrane electrode for the determination of verapamil

A verapamil-PVC membrane ion-selective electrode based on the verapamil-reineckate ion pair was prepared with dibutyl phthalate as a plasticizer. The electrode exhibited a linear response with a Nernstian slope (52.8 mV decade^?1 at 20° C) for verapamil concentrations of 10^?5?10^?2M over the pH range 3–7. The electrode also exhibited very good selectivity for verapamil with respect to various inorganic and organic cations. Gran II linear titration and potentiometric titration were used to determine verapamil in pure solution, with an average recovery of 99.3% and a relative standard deviation of 0.4%.     

Highly Selective and Sensitive Membrane Sensors for Copper(II) Ion Based on a New Benzo‐Substituted Macrocyclic Diamide 6,7,8,9,10‐Hexahydro‐2H‐1,13,4,7,10‐benzodioxatriazacyclopentadecine‐3,11(4H,12H)‐dione

Novel PVC membrane (PME) and coated graphite (CGE) Cu²⁺‐selective electrodes based on 5,6,7,8,9,10‐hexahydro‐2H‐1,13,4,7,10‐benzodioxatriazacyclopentadecine‐3,11(4H,12H)‐dione are prepared. The electrodes reveal a Nernstian behavior over wide Cu²⁺ ion concentration ranges (1.0×10^?7–1.0×10^?1 M for PME and 1.0×10^?8–1.0×10^?1 M for CGE) with very low limits of detection (7.8×10^?8 M for PME and 9.1×10^?9 M for CGE). The potentiometric responses are independent of the pH of the test solutions in the pH range 2.7–6.2. The proposed electrodes possess very good selectivities for Cu²⁺ over a wide variety of the cations including alkali, alkaline earth, transitions and heavy metal ions. The practical utility of the proposed electrodes have been demonstrated by their use in the study of interactions between copper ions and human growth hormone (hGH) in biological systems, potentiometric titration of copper with EDTA and determination of copper content of a sheep blood serum sample and some other real samples.     

Papaverine-Selective Plastic Membrane Electrode Based on Papaverinium Tetraphenylborate

Abstract

A plasticized PVC membrane containing the lipophilic salt papaverinium-tetraphenylborate was used to construct an ion-selective electrode for papaverine hydrochloride (Pv⁺Cl^?). The electrode shows near Nernstian response over the concentration range 1.6 × 10^?5 1.3C × 10^?2M PvCl in solutions of pH 1.0–6.2 at 25[ddot]C. The standard electrode potentials were determined at different temperatures and used to calculate the isothermal coefficient of the electrode. The electrode showed very good selectivity for Pv with respect to a large number of inorganic and organic cations. The potentiometric titration and standard addition methods were used to determine Pv in pure solutions and in pharmaceutical preparations.     

Copper(II) ion selective electrode based on a newly synthesized Schiff-base chelate

A new Cu (II) ion-selective electrode has been fabricated in poly (vinyl chloride) matrix based on a recently synthesized Schiff-base chelate. The addition of sodium tetraphenylborate (NaTPB) and various plasticizers viz. TBP, TEHP, DOS, and CN have been found to substantially improve the performance of the electrode. The membrane of various compositions of the ionophore (I) were investigated and it was found that the best performance was obtained with the membrane having (I): PVC: NaTPB: CN in the ratio 4: 140: 3: 80 (mg). The electrode exhibits a Nernstian response over a wide concentration range (1.9 × 10⁻⁶–1.0 × 10⁻¹ M) with 30.0 mV/decade of concentration between pH 3.0 and 7.5. The response time of the electrode is about 12 s and it can be used over a period of 3 months without any divergence in potential. The potentiometric selectivity coefficient values as determined by fixed interference method indicate excellent selectivity for Cu²⁺ ions over interfering cations. The electrode has also been used successfully in partially non-aqueous media having a 25% (v/v) methanol, ethanol or acetone content without showing any considerable change in the value of slope or working concentration range. The electrode has been used in the potentiometric titration of Cu²⁺ with EDTA.     

Poly(Vinyl Chloride) Containing Dibenzo-18-crown-6 as an Ion-Selective Membrane for Hyamine 1622

Abstract

A poly(vinyl chloride) membrane ion-selective electrode for the Hyamine 1622 cation is proposed. The active substance of the electrode was the neutral carrier dibenzo-18-crown-6 and di-iso-octylphthalate was used as plasticizer. The electrode had a Nernstian behaviour between 6.0 × 10^?6 and 1.6 × 10^?3 mol/dm³, a pH working range of 2 – 12 and high selectivity towards inorganic cations. Among the organic cations tested, only those having surfactant properties did interface. The electrode was suitable for determining the critical micelle concentration and as end-point detector in the potentiometric titration of the cationic surfactants.     

Application of artificial neural network to simultaneous potentiometric determination of silver(I), mercury(II) and copper(II) ions by an unmodified carbon paste electrode

The response characteristics and selectivity coefficients of an unmodified carbon paste electrode (CPEs) towards Ag⁺, Cu²⁺ and Hg²⁺ were evaluated. The electrode was used as an indicator electrode for the simultaneous determination of the three metal ions in their mixtures via potentiometric titration with a standard thiocyanate solution. A three-layered feed-forward artificial neural network (ANN) trained by back-propagation learning algorithm was used to model the complex non-linear relationship between the concentration of silver, copper and mercury in their different mixtures and the potential of solution at different volumes of the added titrant. The network architecture and parameters were optimized to give low prediction errors. The optimized networks were able to precisely predict the concentrations of the three cations in synthetic mixtures.     

The Electropolymerization of 2,6‐Diaminopyridine and Its Application as Mercury Ion Selective Electrode

A composite graphite (CG) electrode modified with poly(2,6‐diaminopyridine) (PDAP) was used as solid state‐ion selective electrode for determination of mercury. The electrooxidation of monomer 2, 6 diaminopyridine (DAP) onto CG was accomplished from the 30 mM DAP in 5% H₂SO₄ and 0.5 M ZnSO₄. The electrode displayed Nernstian response with slope of 28.4±1 mV decade⁻¹ in concentration range of 1×10⁻⁶ to 1×10⁻¹ M and in solution of pH 3–5. The limit of detection for electrode was 3×10⁻⁸ M with response time of 25 s. The electrode was also suitable as an indicator electrode in the potentiometric titration of Hg²⁺ with iodide.     

A New Type of Precipitating Agent for Copper Membrane Electrode

Abstract

Thiourea as a precipitating agent for copper membrane electrode is proposed. Detailed information is provided concerning the construction of the electrode as well as its application in potentiometric titration and in the direct determination of copper (II) in commercial ethyl alcohol. The theory of the electrode potential is consistent with the Cu(II)/Cu(I) system rather than the Ag (I)/Ag one.     

Determination of Fluoride Ions in Mouthwash Samples by a PVC Membrane Samarium(III) Sensor

Abstract

In this study, a new ion-selective electrode for Sm³⁺ is described, illustrating 2-[(E)-1-(1H-pyrrol-2-yl)methylidene]-1-hydrazinecarbothioamide (PMH) in a poly(vinylchloride) (PVC) membrane with nitrobenzene (NB) as a plasticizer and sodium tetraphenyl borate (NaTPB) as an anionic additive. The proposed sensor exhibited a Nernstian response for Sm³⁺ ions over a wide concentration range between 1.0 × 10^?2 and 1 × 10^?6 M, with a detection limit of 5.2 × 10^?7 M in the pH range of 4.2–8.5. Moreover, the sensor displayed the Nernstian slope of 19.8 ± 0.3 mV per decade, having a fast response time within 10 s over the entire concentration range. This electrode presented very good selectivity and sensitivity toward the Sm³⁺ ions over a wide variety of cations, including alkali, alkaline earth, transition-metal, and heavy-metal ions. It was used as an indicator electrode in the potentiometric titration of Sm³⁺ ions with EDTA. The membrane sensor was also applied to the determination of fluoride ions in mouthwash samples.