Flow Injection and Batch Spectrophotometric Determination of Ibuprofen Based on its Competitive Complexation Reaction with Phenolphthalein‐β‐Cyclodextrin Inclusion Complex

Abstract

Rapid, simple, and accurate spectrophotometric method is presented for the determination of ibuprofen by batch and flow injection analysis methods. The method is based on ibuprofen competitive complexation reaction with phenolphthalein‐β‐cyclodextrin (PHP‐β‐CD) inclusion complex. The increase in the absorbance of the solution at 554 nm by the addition of ibuprofen was measured. Ibuprofen can be determined in the range 8.0×10^?6 ?3.2×10^?4 and 2.0×10^?5?5.0×10^?3 mol l^?1 by batch and flow methods, respectively. The limit of detection and limit of quantification were 6.19×10^?6 and 2.06×10^?5 mol l^?1 for batch and 1.77×10^?5 and 5.92×10^?5 mol l^?1 for flow method, respectively. The sampling rate in flow injection analysis method was 120±5 samples h^?1. The method was applied to the determination of pharmaceutical formulations.     

Trace Analysis of Lead and Copper Ions in Fish Tissue Using Paste Electrodes

Abstract

DNA was immobilized onto a carbon nanotube surface through cyclic voltammetry, in which paste electrode (PE) was subjected to lead and copper trace ion analysis. Optimized conditions for square‐wave stripping voltammetry were then searched. The results indicated three other linear working ranges—3–21 mg l^?1, 2–16 µg l^?1, and 3–17 ng l^?1 Pb(II) Cu(II)—within an accumulation time of 190 s in 0.1‐M ammonium phosphate electrolyte solutions of pH 10.0. At the optimized conditions, the detection limit (S/N) was pegged at 0.4 ng l^?1 (1.93×10^?12 M Pb(II) and 6.29×10^?12 M Cu(II)). And the relative standard deviation at 10 mg l^?1 Pb(II) and Cu(II) was a 0.074 and 0.069% precision, in 15 measurements. The method can be applied to assays of fish tissue.     

Biamperometric Determination of Tetracycline in Pharmaceuticals

Abstract

A fast, reliable, and low cost biamperometric flow‐injection method, with an error of 1.3% and an analytical throughput of 55 samples h^?1, for determination of tetracycline hydrochloride in pharmaceuticals capsules is proposed. The analytical curve was linear (r=0.998) in the range 10 to 50 mg l^?1 using Fe(CN)₆ ^3? and NaOH solutions as reagent and carrier stream/supporting electrolyte, respectively. A relative standard deviation of 1.6% (10 sequential injections of 30.0 mg l^?1) was verified with detection and quantification limits of 0.6 and 3.4 mg l^?1, respectively.     

Improving the Determination of Nitrovin in Feeds by Reversed-Phase LC with SPE

A simple reversed-phase liquid chromatographic method with ultraviolet detector (378 nm) for the determination of nitrovin in feeds was improved and validated. The mobile phase was a mixture of acetonitrile and 0.1% formic acid solution (v/v) in the ratio of 50:50 (v/v), and the flow rate was set at 1.2 mL min^?1. The extraction solution was a mixture of dimethyl formamide, acetonitrile and methanol (50:25:25, v/v), the sample was cleaned-up with reversed-phase solid phase extraction cartridge. The standard nitrovin was purified with crude nitrovin product by ethylene glycol monoethyl ether and identified by elemental analyzer. The limit of detection was 0.05 mg kg^?1 and the limit of quatification was 0.2 mg kg^?1 in feeds. The assay had satisfactory selectivity, recovery, linearity and precise repeatability and trueness.     

Determination of Titanium in Nano-Titanium(IV) Oxide Composite Food Packaging by Microwave Digestion and Inductively Coupled Plasma Atomic Emission Spectrometry and Inductively Coupled Plasma Mass Spectrometry

Titanium was determined in nano-titanium(IV) oxide food packaging by microwave digestion with inductively coupled plasma atomic emission spectrometry (ICP-AES) and inductively coupled plasma mass spectrometry (ICP-MS). Microwave digestion was optimized using different acid combinations. Both spectrometry techniques showed good reproducibility, repeatability, and recovery. For ICP-AES, the limit of detection was 5.0 mg kg^?1, the linear dynamic range was 100–5000 µ g L^?1, the average recoveries for blank samples spiked with titanium were between 94.7% and 100.1%, and the relative standard deviations were from 2.1% to 7.1%. By ICP-MS, the limit of detection was 0.3 mg kg^?1, the linear dynamic range was 0.5–200 µ g L^?1, the recoveries were 88.4%–96.3%, and the relative standard deviations were 6.3%–7.4%. These results indicated that methods were effective for the determination of titanium in food packaging.     

Flow‐Injection Spectrophotometric Determination of N‐acetylcysteine in Pharmaceutical Formulations with On‐Line Solid‐Phase Reactor Containing Zn(II) Phosphate Immobilized in a Polyester Resin

Abstract

A flow‐injection spectrophotometric procedure was developed for determining N‐acetylcysteine in pharmaceutical formulations. The sample was dissolved in deionized water and 400 µl of the solution was injected into a carrier stream of 1.0×10^?2 mol l^?1 sodium borate solution. The sample flowed through a column (70 mm length×2.0 mm i.d.) packed with Zn₃(PO₄)₂ immobilized in a polymeric matrix of polyester resin and Zn(II) ions were released from the solid‐phase reactor because of the formation of the Zn(II) (N‐acetylcysteine)₂ complex. The mixture merged with a stream of borate buffer solution (pH 9.0) containing 5.0×10^?4 mol l^?1 Alizarin red S and the Zn(II)Alizarin red complex formed was measured spectrophotometrically at 540 nm. The analytical curve was linear in the N‐acetylcysteine concentration range from 3.0×10^?5 to 1.5×10^?4 mol l^?1 (4.9 to 24.5 µg ml^?1) with a detections limit of 8.0×10^?6 mol l^?1 (1.3 µg ml^?1). The relative standard deviations (RSDs) were smaller than 0.5% (n=10) for solutions containing 5.0×10^?5 mol l^?1 (8.0 µg ml^?1) and 8.0×10^?5 mol l^?1 (13.0 µg ml^?1) of N‐acetylcysteine, and the analytical frequency was 60 determinations per hour. A paired t‐test showed that all results obtained for N‐acetylcysteine in commercial formulations using the proposed flow‐injection procedure and a comparative procedure agreed at the 95% confidence level.     

Multivariate Optimization and Validation of a CZE Method for the Analysis of Pridinol Mesylate and Meloxicam in Tablets

A capillary zone electrophoresis method for the simultaneous determination of pridinol mesylate (PRI) and meloxicam (MEL) employing epinastine hydrochloride and piroxicam as internal standards, was developed and optimized employing experimental design and response surface methodologies. The separation was optimally achieved in less than 2 min at 30 kV in an uncoated fused-silica capillary (41.4 cm × 75 ??m I.D.), employing an 18 mmol L^?1 sodium phosphate buffer solution (pH 5.90) at 25 °C. Samples were injected in hydrodynamic mode (50 mbar, 5 s) and the analytes were spectrophotometrically detected at 200 nm. Method robustness was demonstrated by ANOVA of determinations performed under conditions slightly different from the optimum. The method was validated regarding separation selectivity (peak purity factors > 0.99), linearity and range (PRI = 17.6?C31.4 mg L^?1; MEL = 66.5?C122.5 mg L^?1), accuracy (PRI = 100.2?C101.9%; MEL = 98.9?C100.7%) and precision. The RSD values obtained were ??1.3% for injection repeatability and ??1.9% for intra-day precision. The limits of detection (1.0 and 0.9 mg L^?1) and quantification (3.3 and 16.5 mg L^?1) of PRI and MEL, respectively, were also determined. The method was successfully applied to the determination of both drugs in three brands of tablet formulations. No statistically significant differences were observed when these results were compared with those of a RP-HPLC method.     

Ultrasensitive Assay of Gatifloxacin at Picogram Level Based on its Enhancing Effect on the Myoglobin‐Luminol Chemiluminescence Reaction

Abstract

Picogram‐level gatifloxacin was determined based on its significantly catalyzed effect on myoglobin‐luminol chemiluminescence (CL) reaction in the flow injection system. The enhanced chemiluminescence intensity was linear with gatifloxacin concentration in the range from 50 ngl^?1–10 µg l^?1 (r²=0.9995), and the detection limit was 20 ng l^?1 (3σ). At a flow rate of 2.0 ml min^?1 for each line, a complete analytical process could be performed within 0.5 min, including sampling and washing, with a relative standard deviation of less than 4.0% (n=7). The proposed method was applied successfully in the determination of gatifloxacin in tablets, human serum and urine samples with the recovery from 97.4–104.5%.     

Influence of Culture Medium Composition and Light Conditions on the Accumulation of Bioactive Compounds in Shoot Cultures of <Emphasis Type="Italic">Scutellaria lateriflora</Emphasis> L. (American Skullcap) Grown In Vitro

Methanolic extracts from in vitro grown Scutellaria lateriflora shoots cultured on five Murashige and Skoog (MS) medium variants supplemented with different combinations of 6-benzylaminopurine (BAP) and α-naphthaleneacetic acid (NAA) under different light conditions (monochromatic light, white light and no light) were analysed by HPLC for three groups of metabolites: flavonoids (26 compounds), phenolic acids and their precursors (19+2) and phenylethanoid glycosides (2). The analyses revealed the presence of baicalein, baicalin, wogonin, wogonoside, 3,4-dihydroxyphenylacetic acid and verbascoside. There was clear evidence of the influence of plant growth regulators and light conditions on the accumulation of the analysed groups of secondary metabolites. The amounts of the compounds changed within a wide range—for the total flavonoid content, 30.2-fold (max. 1204.3 mg·100 g^?1 dry weight (DW)); for 3,4-dihydroxyphenylacetic acid, 5.5-fold (max. 33.56 mg·100 g^?1 DW); and for verbascoside, 1.5-fold (169.15 max. mg·100 g^?1 DW). The best medium for the production of most of the compounds was the Murashige and Skoog variant with 1 mg l^?1 BAP and 1 mg l^?1 NAA. For verbascoside, the best ‘productive’ medium was the MS variant supplemented with 0.5 mg l^?1 BAP and 2 mg l^?1 NAA. The accumulation of the metabolites was stimulated to the greatest extent by blue light, under which the extracts were found to contain the highest total amount of flavonoids and the highest amounts of flavonoid glucuronides, baicalin and wogonoside, as well as of verbascoside. Their amounts were, respectively, 1.54-, 1.49-, 2.05- and 1.86-fold higher than under the control white light.     

Simultaneous Determination of Four Alkaloids in Gan-Yan-Ling Injection by GC-MS

A new separation and quantification method based on GC-MS in the selective ion mode for simultaneous determination of four alkaloids in Gan-Yan-Ling injection was developed. The calibration curves are linear over the range of 0.0125–0.555 mg mL^?1 for cytisine, 0.009455–1.008 mg mL^?1 for sophocarpine, 0.04739–1.516 mg mL^?1 for matrine and 0.01135–1.211 mg mL^?1 for sophoridine. Eleven different batches of Gan-Yan-Ling injections were analyzed and the results indicated that the method was sensitive and reliable for the determination of four alkaloids and could be used to control the quality of the preparation.     

Determination of Trenbolone Acetate in Cattle Feeds by a Flow Injection Chemiluminescence Method

A flow injection chemiluminescence (CL) method is described for the determination of trenbolone acetate based on the CL generated during its reaction with KMnO₄ in acidic medium. The CL intensity is greatly enhanced by alizarin yellow R. The CL intensity is linear with trenbolone acetate concentration in the range 0.1–100.0 mg L^?1 with a detection limit of 0.05 mg L^?1. The sample throughout is about 90 h^?1 and the relative standard deviation for 2.0 mg L^?1 trenbolone acetate solution is 1.5% (n = 11). The proposed method was applied to the determination of trenbolone acetate in cattle feeds.     

Cyclic voltammetry as a screening tool for the fungal degradation of 2,4,6-trinitrotoluene in aqueous media

The use of an electrochemical technique based on cyclic voltammetry (CV) that can be implemented to monitor the degradation of the important nitroaromatic explosive 2,4,6-trinitrotoluene (TNT) in aqueous media when in contact with a microorganism is presented. The microorganism used in this study was an isolated fungus belonging to the Aspergillus genus. In the degradation experiments, during the first 21 days of exposure of the fungal growth to a 68 mg L^?1 TNT aqueous stock solution, the analyte concentration decreased by 44% to 38 mg L^?1 before plateauing through the 58th day of the study. Statistical figures of merit of the technique included linearity in the 1–92 mg L^?1 range and correlation coefficients above 98% for the three reduction peaks of TNT, a limit of detection (LOD) of 3 mg L^?1, a limit of quantification of 10 mg L^?1 and a method precision of 3.8% relative standard deviation (%RSD). Day-to-day and week-to-week repeatability were low at 5.1%RSD and 5.8%RSD, respectively. The results herein exhibit first-order kinetics for the ‘ortho’ nitro group. A clear to yellow colour transition in the control solution and fungi samples suggests the appearance of a TNT metabolite. UV-Vis spectrophotometry supports the presence of a possible derivative of TNT in the fungi samples.     

Determination of Aluminum Traces in Hemodialysis and Tap Water Using Standard Method's Procedure Modified and Flow Injection Ionic Exchange Preconcentration

Abstract

A procedure for the spectrophotometric determination of aluminum traces in water using a flow injection (FI) preconcentration system has been proposed. The flow system was made up of a peristaltic pump, an injector‐commutator, and a minicolumn filled with 300.0 mg of Amberlite IR‐120 cationic exchange resin. After the preconcentration step, aluminum was eluted by a 4.0 mol l^?1 HCl solution. In a second stage, out of the flow system, the eluate was neutralized with a 4.0 mol l^?1 NaOH solution. The aluminum was submitted to the reaction with eriochrome cyanine to form a chelate in solution buffered to pH 5.85, according to the Standard Method's procedure with some modifications, and this was followed by spectrophotometric detection. Chemical and flow variables were studied in the preconcentration system. The precision of the proposed method was calculated for a solution containing 46.8 µg l^?1 of Al(III), when 40.0 ml of solution were preconcentrated (n=7), and their respective relative standard deviation (RSD) was 1.8%. The detection limit obtained was 1.7 µg l^?1 of Al(III) (sample volume=40.0 ml). The proposed method was successful in determining aluminum in water certified reference material.     

Identification and Quantification of Heterologous Compounds Parthenin and Organic Acids in Parthenium Hysterophorus L. Using HPLC-PDA-MS-MS

Parthenium hysterophorus L., is an obnoxious weed known for its environmental health hazards and medicinal uses. These characteristics are due to presence of sesquiterpene lactones and organic acids; therefore a rapid and sensitive analytical procedure using HPLC-PDA-MS-MS was developed and optimized for separation, identification, and quantification of parthenin and six organic acids. Separation and characterization of compounds was achieved on a RP-C18 column with 1% acetic acid in water (A) and acetonitrile (B) as a mobile phase at a flow rate of 0.6 mL min^?1 and by matching their UV and mass spectra with reference compounds. Six organic acids (ferulic acid, 0.1 mg g^?1 to coumaric acid, 13.6 mg g^?1) and parthenin (27.4 mg g^?1) were characterized within 26 minutes of chromatographic separation in plant extract. The calibration curves are linear with correlation coefficients from 0.985 to 0.998, limit of detection and quantification ranged between 1.0 µg mL^?1 (anisic acid) to 2.2 µg mL^?1 (parthenin) and 2.5 µg mL^?1 (coumaric acid) to 5.2 µ g mL^?1 (parthenin) and recovery ranged between 90.9% to 97.3%. To the best of our knowledge this is the first report for the simultaneous separation of parthenin and organic acids. The method is applicable for screening of commercial crops, medicinal plants, and their products which might be mixed with P. hysterophorus during harvesting period.     

Optimization of Adventitious Root Culture for Production of Biomass and Secondary Metabolites in Prunella vulgaris L.

Adventitious root cultures of Prunella vulgaris L. were established in shaking flask system for the production of biomass and secondary metabolites. Adventitious root cultures were induced from callus cultures obtained from leaf explants on solid Murashige and Skoog (MS) medium containing combination of 6-benzyladenine (BA; 1.0 mg l^?1) and naphthalene acetic acid (NAA; 1.5 mg l^?1). Thereafter, 0.49 g inoculum was transferred to liquid MS medium supplemented with different concentrations of NAA (0.5–2.0 mg l^?1). Growth kinetics of adventitious roots was recorded with an interval of 7 days for 49 days period. Highest biomass accumulation (2.13 g/l) was observed in liquid medium containing 1.0 mg l^?1 NAA after 21 days of inoculation. However, other concentrations of NAA also showed similar accumulation pattern but the biomass gradually decreases after 49 days of inoculation. Adventitious roots were collected and dried for investigation of total phenolics (TP), total flavonoids (TF), and antioxidant activities. Higher TPC (0.995 GAE mg/g-DRB) and TFC (6.615 RE mg/g-DRB) were observed in 0.5 mg l^?1 NAA treated cultures. In contrast, higher antioxidant activity (83.53 %) was observed 1.5 mg l^?1 NAA treated cultures. These results are helpful in up scaling of root cultures into bioreactor for secondary metabolites production.     

Regeneration and Agrobacterium-mediated transformation of the apomictic species Eulaliopsis binata

Protocols for regeneration and Agrobacterium-mediated transformation of the apomictic species Eulaliopsis binata were developed. Initially, seeds of four genotypes of E. binata were incubated on a callus induction Murashige and Skoog (MS) basal medium supplemented with three concentrations of 2,4-dichlorophenoxyacetic acid (2,4-D). It was found that 36.2 % of explants developed highly friable callus on medium containing 3.0 mg l^?1 2,4-D. Based on frequency of callus induction, the genotype Neixiang was selected for regeneration and transformation. Callus incubated on MS basal medium supplemented with 0.2 mg l^?1 α-naphthalene acetic acid and 6.0 mg l^?1 6-furfuryl-aminopurine developed shoots. Subsequently, Agrobacterium tumefaciens strain EHA105—harboring a plasmid pCAMBIA1381 carrying a hygromycin phosphotransferase (hpt) resistance gene and a synthetic green fluorescent protein (GFP) gene, both driven by the cauliflower mosaic virus 35S promoter—was used for transformation system. Putative transgenic callus was obtained following two cycles of hygromycin selection. Expression of the transgene(s) in putative transgenic callus was analyzed using the GFP detection. Molecular identification of putative transformed shoots was performed by polymerase chain reaction and Southern blot analysis to confirm presence and integration of the hpt gene.     

Automated Derivatization of Pharmaceutically Active Thiols Under Flow Conditions Using an o-Phthalaldehyde/Glycine Fluorogenic System and Sequential Injection Analysis

The present study reports a new automated, generic analytical method for the determination of the pharmaceutically active thiols captopril (CAP), N-acetylcysteine (NAC), and D-Penicillamine (PEN). The proposed sequential injection (SI) method is based on the on-line reaction of the selected thiols with o-phthalaldehyde/glycine in alkaline medium (pH = 9.5) to form highly fluorescent iso -indole derivatives. The effect of all major flow and reaction variables was investigated, while validation was carried out in terms of linearity/range (2.5–7.5 mg L^?1), limits of detection (1.6–2.3 µ g L^?1), quantification (5.3–7.7 µ g L^?1), precision (0.9–1.2% for repeatability and 3.5–4.9% for intermediate precision), selectivity, and accuracy (98.3–102.8%). The developed method was applied to the assay and dosage uniformity tests of various pharmaceutical formulations at a sampling rate of 73 h^?1.     

Determination of Sb(III) and Total Sb in Antileishmanial Drugs by Spectrophotometric Flow‐Injection Hydride Generation

Abstract

A spectrophotometric procedure based on hydride generation and flow analysis is proposed for determination of antimony (III) [Sb(III)] and total antimony (Sb) in pharmaceutical samples. Firstly, Sb(III) reacts with hydrogen species generated in the system, forming antimony hydride. The reaction leads to a decrease in the permanganate concentration and, hence, in the intensity of the color of this specie, which is spectrophotometrically measured at 528 nm. Total Sb is determined as Sb(III) after Sb(V) reduction using 0.02% (m/v) KI. Some parameters, such as the number of channels of the gas phase separator, injection volume, coil length, and KBH₄ concentration, are investigated. The system presents a frequency of ca. 100 h^?1 and precision <3.0% [expressed as relative standard deviation (RSD) of 30 measurements using a 3.0 mg L^?1 Sb(III) solution]. The analytical curve ranging from 0.5 mg L^?1 to 5.0 mg L^?1 (r>0.998; n=5) permits limit of detection (LOD) and limit of quantification (LOQ) of 83 and 250 µg L^?1. For total Sb, the accuracy is checked by atomic absorption spectrometry applying the t test and the results are in accordance at the 95% confidence level. Recovery tests are used to check the accuracy for Sb(III) determination, and the recoveries are between 95% and 105%.     

Determination of Melamine in Food by SPE and CZE with UV Detection

A novel method for the determination of melamine residue in food was developed using solid-phase extraction and capillary zone electrophoresis with UV detection. Spiked samples were extracted with 1% trichloroacetic acid while 0.03 g sodium deoxycholate was used to precipitate protein in the real samples. After centrifuging and clean-up by solid-phase extraction cartridge, the extract was directly analyzed by CZE–UV. The method was validated and good results were obtained with respect to precision, repeatability and spiked recovery. The limit of detection for melamine varied between 0.25 and 0.5 mg kg^?1. The proposed method was successfully applied for the analysis of melamine in food with total recoveries ranging from 94 to 102% in the spiked range of 0.5–5 mg kg^?1, and the relative standard deviations were between 1.5 and 4.1%.     

Determination of Mercury Using a Novel Sonogel‐Carbon 3‐Methylthiophene Electrode

Abstract

A solid Sonogel‐Carbon electrode was modified for the determination of Hg (II) in industrial waste water. 3‐Methylthiophene (3MT), pyrrol, poly‐3‐methylthiophene (P3MT), polypyrrol, and C18 were used for the chemical modification. The obtained composite electrodes were tested for their response to Hg(II); the best results were observed for the 3MT monomer modification with a detection limit of 10^?2 mg · l^?1 and 3 weeks lifetime of use. A linear relationship between anodic peak height and concentration inside the range of 0.07–0.42 mg · l^?1 was obtained. A study of interferences due to other heavy metal is also included.