Simultaneous Determination of Ibuprofen and Pseudoephedrine Hydrochloride in Pharmaceutical Tablets by Reversed-Phase HPLC

Abstract

An isocratic HPLC method was developed and validated for the simultaneous determination of ibuprofen (IBU) and pseudoephedrine hydrochloride (PSE). Chromatography was carried out on an Apex phenyl column using 0.025 M acetic acid, triethylamine solution (pH 4.5) – acetonitrile (80:20, v/v) as mobile phase at a flow rate of 1 mL · min^?1. UV detection was performed at a wavelength of 210 nm. The method was validated for specificity, linearity, accuracy, precision, and was successfully applied to pharmaceutical tablets of Rhinadvil®.     

Determination of Belotecan in the Plasma,Bile, and Urine of Rats by High-Performance Liquid Chromatography with Fluorescence Detection and Its Application to a Pharmacokinetic Study

Abstract

A simple and reliable high-performance liquid chromatographic (HPLC) method was developed for the determination of belotecan in the plasma, urine, and bile samples of rats. Belotecan was analyzed with HPLC using a C18 column with fluorescence detector. A mixture of acetonitrile–0.1 M potassium phosphate buffer at pH 2.4 (25:75, v/v) and 0.2% trifluoroacetic acid was used as the mobile phase. The lower limits of quantitation (LOQ) were 5 ng mL^?1 for the plasma and 5 µg mL^?1 for the urine and bile samples. The method has been readily applied for the routine pharmacokinetic study of belotecan in small laboratory animals.     

A Chemometrical Approach to Optimization and Validation of an HPLC Assay for Rizatriptan and its Impurities in Tablets

Abstract

An isocratic reversed‐phase high‐performance liquid chromatographic method was developed and validated for the analysis of a novel antimigraine drug, rizatriptan benzoate, in a dosage form along with its two impurities, L‐749.019 and L‐783.540. The method used a C₁₈ XTerra? (150×3.9 mm), 5 µm column. The mobile phase consisted of a mixture of methanol, TEA (1%) and 10 mM KH₂PO₄ (5:9.5:85.5 v/v) at a flow rate of 1.2 ml min^?1 (pH of the water phase was adjusted to 5.5 with 85% orthophosphoric acid). Column temperature was 20°C and the detection was performed at 225 nm. The central composite design technique and the response surface method were used in the robustness test considerations. The method was applied satisfactorily to the analysis of commercial rizatriptan formulation.     

LC Determination of Lidocaine and Prilocaine Containing Potential Risky Impurities and Application to Pharmaceuticals

A liquid chromatographic method for the determination of lidocaine (LID), prilocaine (PRL) and their impurities 2,6-dimethylaniline (DMA) and o-toluidine (TOL) has been developed. The analysis was performed on a reversed phase C18 Hypersil BDS column at ambient temperature. A mobile phase consisting of Briton-Robinson buffer, pH 7—methanol—acetonitrile (40: 45: 15 v/v/v) was used at a flow rate of 1.2 mL min^?1. Detection was achieved at 225 nm using benzophenone as internal standard over the concentration range 1.25–80 μg mL^?1 for all analytes. The relative standard deviations RSD (n = 7) for the assay were less than 0.95%. Limit of detection values were found to be 0.346, 0.423, 0.112 and 0.241 μg mL^?1 for LID, PRL, DMA and TOL, respectively. The intraday and the inter-days RSD % indicated the precision of the procedure. The method proved to be suitable for the quality control of LID and PRL in pharmaceuticals.     

Development and Validation of a Novel Stability Indicating UPLC <Emphasis Type="SmallCaps">M</Emphasis>ethod for Analysis of Related Compounds and Assay of Bexarotene,an Anti-Cancer Agent

A novel liquid chromatographic method for the analysis of four potential impurities in the anti-cancer agent Bexarotene has been developed and validated using efficient chromatographic separation, achieved on a C₁₈ column (50 mm × 2.1 mm, 1.7-μm particles) with a simple isocratic mobile phase at a flow rate of 0.5 mL min^?1. The mobile phase consisted of a 70:30:0.1 (v/v/v) mixture of acetonitrile, water and trifluoroacetic acid, and quantification was achieved by use of ultraviolet detection at 260 nm. Resolution between Bexarotene and its four potential impurities was greater than 2.0. Regression analysis showed the r value (correlation coefficient) was >0.999 for Bexarotene and its four impurities. The method was capable of detecting all four impurities of Bexarotene at levels below 0.10 μg in a Bexarotene test concentration of 0.5 mg mL^?1 using an injection volume of 5 μL. The recovery for Bexarotene in assay method at a 100% level was observed to be 99.1 ± 0.32% with % RSD value of 0.5% for drug substance and 98.9 ± 0.46% for Bexarotene capsules with % RSD value of 0.4%. Recovery of imp-1, imp-2, imp-3, and imp-4 from bulk drug samples ranged from 96.3 to 102.0%. Recovery of imp-1, imp-2, imp-3, and imp-4 from Bexarotene Capsule samples ranged from 97.2 to 101.4%. A solution of Bexarotene in ethanol was stable for 48 h. The drug was also subjected to stress conditions as prescribed by ICH Guidelines. Degradation was found to occur under acidic and basic hydrolysis stress conditions; however, the drug was stable to oxidative, photolytic, and thermal stress. Assay of the stressed samples was calculated relative to a qualified reference standard and the mass balance was found to be close to 99.8%. The method was validated for linearity, accuracy, precision, and robustness.     

Validated HPLC Method for Separation and Determination of Terbutaline Enantiomers

Abstract

A simple, rapid, and validated method for separation and determination of terbutaline enantiomers was developed. Terbutaline was separated and determined on a Vancomycin Chirobiotic V column (250 × 4.6 mm), using a mixture of methanol, acetic acid, and triethylamine (100:0.1:0.1% v/v/v) as a mobile phase at 20°C and at a flow rate of 1 ml/min. The UV detector was set to 276 nm. Acetyl salicylic acid (aspirin) was used as an internal standard. The applied high-performance liquid chromatography (HPLC) method allowed separation and quantification of terbutaline enantiomers with good linearity (r > 0.999) in the studied range. The relative standard deviations (RSD) were 1.10 and 1.32% for the terbutaline enantiomers with accuracy of 99.80 and 99.55. The limit of detection and limit of quantification of terbutaline enantiomers were found to be 0.05 and 0.10 µg · ml^?1, respectively. The method was validated through the parameters of linearity, accuracy, precision, and robustness. The HPLC method was applied for the quantitative determination of terbutaline in pharmaceutical formulations.     

Development and Validation of a New LC Method for Analysis of Brimonidine Tartrate and Related Compounds

A novel liquid chromatographic method for analysis three potential impurities in brimonidine tartrate drug substance has been developed and validated. Efficient chromatographic separation was achieved on a C₈ column (250 mm × 4.6 mm, 5-μm particles) with a simple mobile-phase gradient at a flow rate of 1.0 mL min⁻¹. Quantification was achieved by use of ultraviolet detection at 248 nm. Resolution between brimonidine tartrate and its three potential impurities was greater than 3.0. Regression analysis showed the r value (correlation coefficient) was >0.999 for brimonidine and its three impurities. The method was capable of detecting all three impurities of brimonidine tartrate at levels below 0.07 μg in a test concentration of brimonidine tartrate of 1.0 mg mL⁻¹ and for an injection volume of 10 μL. A solution of brimonidine tartrate in acetonitrile–water 2:8 (v/v) was stable for 48 h. The drug was subjected to stress conditions as prescribed by the ICH. Degradation was found to occur slightly under oxidative stress conditions but the drug was stable to aqueous, acidic, and basic hydrolysis, and photolytic and thermal stress. The assay of the stressed samples was calculated relative to a qualified reference standard and the mass balance was found close to 99.8%. The method was validated for linearity, accuracy, precision, and robustness.

     

Development and Validation of a New LC Method for Analysis of Brimonidine Tartrate and Related Compounds

A novel liquid chromatographic method for analysis three potential impurities in brimonidine tartrate drug substance has been developed and validated. Efficient chromatographic separation was achieved on a C₈ column (250 mm × 4.6 mm, 5-μm particles) with a simple mobile-phase gradient at a flow rate of 1.0 mL min^?1. Quantification was achieved by use of ultraviolet detection at 248 nm. Resolution between brimonidine tartrate and its three potential impurities was greater than 3.0. Regression analysis showed the r value (correlation coefficient) was >0.999 for brimonidine and its three impurities. The method was capable of detecting all three impurities of brimonidine tartrate at levels below 0.07 μg in a test concentration of brimonidine tartrate of 1.0 mg mL^?1 and for an injection volume of 10 μL. A solution of brimonidine tartrate in acetonitrile–water 2:8 (v/v) was stable for 48 h. The drug was subjected to stress conditions as prescribed by the ICH. Degradation was found to occur slightly under oxidative stress conditions but the drug was stable to aqueous, acidic, and basic hydrolysis, and photolytic and thermal stress. The assay of the stressed samples was calculated relative to a qualified reference standard and the mass balance was found close to 99.8%. The method was validated for linearity, accuracy, precision, and robustness.     

Validation of an HPLC Analytical Method for Determination of Pancuronium Bromide in Pharmaceutical Injections

Abstract

Pancuronium bromide is used with general anesthesia in surgery for muscle relaxation and as an aid to intubation. A high performance liquid chromatographic method was fully validated for the quantitative determination of pancuronium bromide in pharmaceutical injectable solutions. The analytical method was performed on an amino column (Luna® 150 mm × 4.6 mm, 5 µm). The mobile phase was composed of acetonitrile:water containing 50 mmol L^?1 of 1-octane sulfonic acid sodium salt (20:80 v/v) with a flow rate of 1.0 mL min^?1 and ultraviolet (UV) detection at 210 nm. The proposed analytical method was compared with that described in the British Pharmacopoeia.     

A Stability Indicating LC Method for Vardenafil HCl

A simple, sensitive gradient RP-LC assay method has been developed for the quantitative determination of vardenafil HCl in bulk drug and in pharmaceutical dosage forms, used to treat erectile dysfunction. The developed method is also applicable for the related substances determination. Efficient chromatographic separation was achieved on a C18 stationary phase with simple mobile phase combination delivered in a gradient mode and quantification was carried out using ultraviolet detection at a flow rate of 1.0 mL min^?1. In the developed LC method the resolution between vardenafil and its four potential impurities was found to be greater than 3.0. Regression analysis shows an r ² value (correlation coefficient) greater than 0.99 for vardenafil and its four impurities. This method was capable of detecting all four impurities of vardenafil at a level of 0.009% with respect to test concentration of 1.0 mg mL^?1 for a 10 μL injection volume. The method has shown good and consistent recoveries for vardenafil (98.4–100.6%) and its four impurities (93.5–106.2%). The test solution was found to be stable in the diluent for 48 h. Mass balance was found close to 99.4%.     

An Improved HPLC Method for Simultaneous Analysis of Losartan Potassium and Hydrochlorothiazide with the Aid of a Chemometric Protocol

An experimental design method was used for fast, simple, and accurate high-performance-pressure liquid chromatograpy (HPLC) determination of losartan and hydrochlorothiazide in combined dosage forms. This method avoids the disadvantages of the traditional analytical approach, which is time-consuming, involves a large number of runs, and does not allow the determination of multiple interacting parameters. On the basis of preliminary experiments, three independent variables (methanol content, pH value of the mobile phase, and flow rate) were selected as input, and as dependent variables, five responses (retention time of hydrochlorothiazide, retention time of losartan, asymmetry of hydrochlorothiazide peak, asymmetry of losartan peak, and resolution) were chosen. A full 2³ factorial design was used to determine which factors had an effect on the studied response. Afterwards, experimental design was used to optimize these influencing parameters in the previously selected experimental domain. After optimizing the experimental conditions, a separation was conducted on a Zorbax C₈ (150 mm × 4.6 mm, 5 μm particle size) column with a mobile phase consisting of methanol–acetonitrile–acetate buffer 45:20:35 v/v/v, pH 4.8 with flow rate of 0.82 mL min^?1 and column temperature of 25 °C. The developed method was successfully applied to simultaneous separation of these active drug compounds in their commercial pharmaceutical dosage forms.     

Development and validation of high-performance thin-layer chromatographic method for determination of amygdalin

ABSTRACT

A new method for the extraction and quantitative determination of amygdalin has been proposed. Accelerated solvent extraction was applied for the extraction, and reversed-phase high-performance thin-layer chromatography method was developed, validated, and applied for the determination of amygdalin in the extracts of apricot, plum, almond, and peach kernels. The chromatographic system used was RP-18 silica, as stationary phase and acetonitrile/water (50:50, v/v), as mobile phase. Densitometric scanning was performed at 210 nm. The method was validated with respect to specificity, linearity, precision, and accuracy. The results showed that the peak area responses were linear within the concentration range of 2.5–50.0 µg/spot (R² = 0.9984). The limit of quantification was 4.28 µg/spot, and the detection limit 1.28 µg/spot. The intra-day and inter-day reproducibility, in terms of %RSD, were in the range of 0.81–1.15 and 1.32–1.89, respectively. The accuracy data were in the range from 99.98 to 100.56%. The method is linear, quantitative and reproducible, and could be used as an efficient and economical green chromatographic procedure for the determination of amygdalin in the fruit kernel.     

Development and Validation of a Stability-Indicating LC Method for Determination of Bexarotene in Softgel Dosage Formulation

This study focuses on a novel liquid chromatographic approach that has been developed and approved for the quantitative determination of bexarotene (BXT), its potential impurities in drug substances and drug products. Chromatographic separation was developed on a Symmetry C₈ (150 × 4.6) mm 5-µm column with a mobile phase containing an isocratic mixture of acetonitrile:DI water:glacial acetic acid (650:350:7.5) v/v/v at a flow rate of 1.2 mL min^?1, and quantitation was carried out using ultraviolet detection at 262 nm for BXT and 290 nm for BHA with a column temperature of 35 °C. The resolution among butylated hydroxyanisole (BHA), BXT and its process-related impurity-A was found to be greater than 5. Regression analysis confers an R value (correlation coefficient) higher than 0.998 for BHA, BXT and impurity-A. The detection level for BXT impurities was found at a level below 0.03% (0.18 µg mL^?1). The inter- and intra-day precisions for BHA, BXT and impurities were evaluated and found to have a %RSD of less than 3.0.     

Simultaneous Quantification of Gentamicin and Colistin Sulfate in Pharmaceuticals using Ion-Pairing and Polarity Gradient Chromatography with Low-UV Detection

For the first time, a simple and rapid method for simultaneous determination of gentamicin sulfate and colistin sulfate in two pharmaceutical formulations for children and adults by ion-pairing reverse phase chromatography and low-UV detection at 215 nm has been developed. This simultaneous analysis is thus a challenge due to the multicomponent mixture of high polar, non volatile and non UV absorbing chromophores. Rapid separation required less than 5 min on a Waters X-Terra^® C18 MS column (50 mm × 4.6 mm i.d., 2.5 μm) with temperature maintained at 35 °C. A linear gradient from 15/85 to 40/60 acetonitrile/water (v/v) with constant hexafluorobutyric acid (HFBA) concentration of 0.05 % (v/v) was used as pairing reagent at 1.5 mL min⁻¹. In pharmaceutical analysis, the basic and polar compounds are separated by ion-pairing chromatography and the detection of analytes with weak chromophores requires working at low wavelengths. This application is an example of troubleshooting, i.e. baseline drift, due to gradient elution and absorbance of the ion-pairing agent. Baseline drift was minimized by optimizing the HFBA concentration gradient and its slope. Complete analytical validation was carried out according to the International Conference of Harmonization, and real samples were analyzed to demonstrate the applicability of the proposed method for routine use.

     

Chemometrically Assisted Development and Validation of LC for Simultaneous Determination of Carbamazepine and Its Impurities Iminostilbene and Iminodibenzyl in Solid Dosage Form

A chemometrical approach was applied to develop a reversed-phase liquid chromatographic method for simultaneous determination of carbamazepine and its impurities iminostilbene and iminodibenzyl in solid dosage form. According to contemporary literature, no method was developed for simultaneous determination of carbamazepine and these impurities by chemometrical approach. The fractional factorial design was used for selection of variables significantly influencing the chromatographic separation of the investigated substances. The investigated variables were: temperature of the column, the percentage of organic modifier, the acetate buffer concentration and pH of water phase. The first three variables were proved to be significant and were optimized by face centered, central composite design. Investigation was performed using C18 XBridge Shield analytical column (50 mm × 4.6 mm i.d., particle size 3.5 µm). The optimal conditions for the separation were established with the mobile phase composition of methanol–10 mM acetate buffer (pH adjusted to 2.21 with glacial acetic acid) (50:50, v/v) at a flow rate of 1.5 mL min^?1, 25 °C column temperature and detection at 260 nm. Total analysis time was shortened to about 8 min. Finally, the method was successfully validated and subsequently applied to the analysis of commercially available carbamazepine tablets.     

Development and Validation of a New Analytical Method for the Determination of Related Components and Assay of Ranolazine in Bulk Drug and Pharmaceutical Dosage Forms by LC

A novel liquid chromatographic method has been developed and validated for the determination of ranolazine, its potential four impurities in drug substance and drug products. Efficient chromatographic separation was achieved on a C18 stationary phase (150 × 4.6 mm, 3.0 microns particles) with simple mobile phase combination delivered in gradient mode at a flow rate of 1.0 mL min^?1 at 210 nm. In the developed method, the resolution between ranolazine and its four potential impurities was found to be greater than 2.0. Regression analysis shows an r value (correlation coefficient) greater than 0.999 for ranolazine and for its four impurities. This method was capable to detect all four impurities of ranolazine at a level below 0.004% with respect to test concentration of 1.0 mg mL^?1 for a 10 μL injection volume. The method has shown good, consistent recoveries for ranolazine (98.8–101.1%) and for its four impurities (97.2–100.3). The test solution was found to be stable in the diluent for 48 h. The drug was subjected to stress conditions. The mass balance was found close to 99.5%.     

A Stability Indicating LC Method for Deferasirox in Bulk Drugs and Pharmaceutical Dosage Forms

A novel, sensitive, stability indicating RP-LC method has been developed for the quantitative determination of deferasirox, its related impurities in both bulk drugs and pharmaceutical dosage forms. Efficient chromatographic separation was achieved on a C18 stationary phase with simple mobile phase combination delivered in an isocratic mode and quantitation was by ultraviolet detection at 245 nm. The mobile phase consisted of buffer, acetonitrile and methanol (50:45:5, v/v) delivered at a flow rate of 1.0 mL min^?1. Buffer consisted of 10 mM potassium dihydrogen orthophosphate monohydrate, pH adjusted to 3.0 by using orthophosphoric acid. In the developed LC method the resolution (R _s ) between deferasirox and its four potential impurities was found to be greater than 2.0. Regression analysis showed an r value (correlation coefficient) greater than 0.999 for deferasirox and its four impurities. This method was capable to detect all four impurities of deferasirox at a level of 0.002% with respect to test concentration of 0.5 mg mL^?1 for a 10 μL injection volume. The inter- and intra-day precision values for all four impurities and for deferasirox was found to be within 2.0% RSD. The method showed good and consistent recoveries for deferasirox in bulk drugs (98.3–101.1%), pharmaceutical dosage forms (100.2–103.1%) and for its all the four impurities (99.7–102.1%). The test solution was found to be stable in methanol for 48 h. The drug was subjected to stress conditions of hydrolysis, oxidation, photolysis and thermal degradation. Considerable degradation was found to occur in acid stress hydrolysis. The stress samples were assayed against a qualified reference standard and the mass balance was found close to 99.95%. The developed RP-LC method was validated with respect to linearity, accuracy, precision and robustness.     

Simultaneous Determination of Trans-Cinnamaldehyde and Benzaldehyde in Different Real Samples by Differential Pulse Polarography and Study of Heat Stability of Trans-Cinnamaldehyde

Abstract

A simple, sensitive, and accurate differential pulse polarography method for simultaneous determination of trans-cinnamaldehyde and benzaldehyde in food and drug samples were developed. DC polarography, CV, and coulometric techniques were used for investigation the electrochemical behavior of both compounds. In phosphate buffer (pH = 8.2) and 10% v/v of methanol the differential pulse voltammograms of trans-cinnamaldehyde (?1.05 V) and benzaldehyde (?1.31 V) display reproducible peaks. Under these conditions a strict linearity between both analyte concentrations and their peaks height were observed. The detection limits were calculated to be 2.5 × 10^?8 and 1.2 × 10^?8 M for trans-cinnamaldehyde and benzaldehyde in pH = 8.2, respectively. The relative standard deviations for 1.0 × 10^?6 M of both analytes were 2.04 and 1.18. The heat stability of trans-cinnamaldehyde was studied, and it was found that trans-cinnamaldehyde undergoes a heat-induced decomposition at low temperature (>70°C) to produce benzaldehyde.     

A Validated LC Method for Determination of Trace Impurities in Technical Triadimefon

A simple and sensitive liquid chromatography with ultraviolet detection (LC?CUV) method was developed for the determination of three impurities with a content over 0.1% (w/w) in technical triadimefon. A Gemini C₁₈ column (5 ??m, 250 mm × 4.6 mm i.d.) was used for the chromatographic separations. The samples were separated by gradient elution with water (solvent A) and methanol (solvent B) using the following conditions: 70% A isocratic for 12 min, linear to 0% A within 8 min, and isocratic for 10 min at 0% A with a flow rate of 1.0 mL min^?1. Chromatograms were recorded at an absorption wavelength of 280 nm. The chromatographic resolutions between triadimefon and its potential impurities A, B, and C were greater than 3. The developed LC method was validated with respect to linearity, accuracy, precision, and robustness. This method was successfully applied to analyze the impurities in commercial technical triadimefon. In addition, the structures of the three impurities were identified to be (A) 4-chlorophenol, (B) 1-(2,4-dichlorophenoxy)-3,3-dimethyl-1-(1H-1,2,4-triazol-1-yl)-2-butanone, and (C) 1,1-bis(4-chlorophenoxy)-3,3-dimethyl-2-butanone.     

Development and Validation of a New Analytical Method for the Determination of Related Components in Quetiapine Hemifumarate

A simple, sensitive isocratic rapid resolution liquid chromatographic assay method has been developed for the quantitative determination of quetiapine hemifumarate in bulk active pharmaceutical ingredient, used for the treatment of schizophrenia. The developed method is also applicable for the process related impurities determination. Efficient chromatographic separation was achieved on a C18 stationary phase with simple mobile phase combination delivered in a isocratic mode and quantification was by ultraviolet detection at 225 nm at a flow rate of 1.0 mL min^?1. In the developed LC method the resolution between quetiapine hemifumarate and its three potential impurities was found to be greater than 2.0. Regression analysis showed an r value (correlation coefficient) greater than 0.99 for quetiapine hemifumarate and its three impurities. This method was capable to detect all three impurities of quetiapine hemifumarate at a level of 0.003% with respect to test concentration of 1.0 mg mL^?1 for a 3 μL injection volume. The bulk active pharmaceutical ingredient was subjected to stress conditions of hydrolysis, oxidation, photolysis and thermal degradation. Considerable degradation was found to occur in oxidative stress conditions. The stress samples were assayed against a qualified reference standard and the mass balance was found close to 99.5%. The developed RR-LC method was validated with respect to linearity, accuracy, precision and robustness.