Selective Kinetic Spectrophotometric Determination of Nitrite in Food and Water

Abstract

A highly selective and sensitive method for the kinetic spectrophothometric determination of sub-microgram amounts of nitrite has been development based on its reaction with Nile blue 2B in acidic medium. The reaction is monitored spectrophotometrically at 595 nm at a fixed time of 4.5 min. The change in absorbance at 595 nm is related to the concentration of nitrite in the range 0.005 - 1.100 μg.ml^?1 The detection limit is 0.001 μg.ml^?1. The relation standard deviation is 1% for 0.020 μg.ml^?1 of nitrite for ten replicate measurements. Most common anions and cations do not interfere. The procedure was applied to the determination of trace amounts of nitrite in sausage and water.     

Kinetic Spectrophotometric Determination of Total Iron in Natural Water by Flow Injection Analysis Using On-Line Preconcentration

A new flow injection catalytic spectrophotometric method for on-line preconcentration and determination of total iron in natural water is described. The method is based on a combination of iron-catalyzed oxidation of diaminoditolyl by potassium bromate and the use of on-line preconcentration of iron onto 8-hydroxy-quinoline immobilized on silica gel. The corresponding calibration graph is linear over the range of 2.0–110ngmL^–1 for Fe(III) using a time-based technique for 5min preconcentration. The relative standard deviation of 11 measurements of 60ngmL^–1 Fe(III) was 0.67%. The method was applied to the determination of iron in natural water. The results obtained by the proposed method were compared with those obtained by ICP-AES. The t-test showed no significant differences between the two methods at a confidence level of 95%.     

Reactivity of Thioglycolic Acid Physically and Chemically Bound to Silica Gel as New Selective Solid Phase Extractors for Removal of Heavy Metal Ions From Natural Water Samples

A method is presented for the immobilization of thioglycolic acid moiety on the surface of active silica gel via a simple and direct synthetic route and based on one step reaction procedure. Two-product solid phase extractors were successfully synthesized according to physical adsorption and chemical immobilization binding techniques, phases (I) and (II), respectively. The mode of interaction between the silanol group and the thioglycolic moiety was also discussed for both phases based on the infrared analysis studies. The thermal stability properties as well as the effect of buffer solutions on the percentage hydrolysis of the two silica gel phases were examined and revealed the high stability and superiority of silica phase (II) in these respects. The evaluation of the selectivity and metal uptake properties incorporated in these two silica gel phases were also studied and discussed for a series of divalent heavy metal ions under different controlling factors. The mmol/g values were found to be higher in case of phase (I). The selective removal and extraction of some heavy metal ions, viz . Cu(II), Zn(II), and Hg(II) from natural seawater samples was successfully accomplished with the percentage recovery values for the three tested metal ions in the range of 96.5-98.4 - 0.2-0.6%. The presence of higher concentrations of Na(I), K(I), Mg(II) and Ca(II) showed insignificant role or no matrix effect on such selective extraction process due to their 0% values of removal by these silica gel phases (I) and (II).     

Molecular Architecture with Nucleobases,Metal Ions and Water Molecules: Mixed Adenine,Hypoxanthine Quartet Containing trans -(NH 3 ) 2 Pt II and Ag + and Harboring a Water Hexamer in Its Chair Conformation

The formation and X-ray crystal structure of a molecular rectangle of 14.25(2) Å ‐ 10.36(2) Å, comprised of two neutral 9-methyladenine (9-MeA) and two anionic 9-methylhypoxanthinate (9-MeHx) model nucleobases as well as two trans -(NH 3 ) 2 Pt II and two Ag + entities, and further cross-linked intermolecularly by Ag + ions, is described: trans -[{(NH 3 ) 2 Pt(9-MeA)(9-MeHx)Ag(NO 3 ) (H 2 O)} 2 Ag](NO 3 ) 3 6H 2 O ( 4 ). The water molecules are located between adjacent purine quartets and adopt a cyclic water hexamer structure in a chair conformation. In addition, the X-ray crystal structure of the precursor of 4 , trans -[(NH 3 ) 2 Pt(9-MeA)(9-MeHxH)](NO 3 ) 2 H 2 O ( 2 ), is reported. 4 is discussed in terms of its relationship to proposals in the literature concerning possible structures of metalated forms of purine quartets.     

Iron and Cobalt Complexes of a Series of Tridentate P,N, P Ligands — Synthesis,Characterization, and Application in Ethene Polymerization Reactions

A series of tridentate P, N, P ligands comprising a central pyridine unit and two pendent diarylphosphane moieties (2, 6‐bis(CH₂PAr₂)pyridine; Ar = phenyl ( 1 ), 2‐methylphenyl ( 2 ), 2, 4, 6‐trimethylphenyl ( 3 )) as well as the corresponding iron ( 1‐FeCl₂ , 2‐FeCl₂ , 3‐FeCl₂ ) and cobalt ( 1‐CoCl₂ , 2‐CoCl₂ , 3‐CoCl₂ ) complexes were synthesized and characterized. An X‐ray structure analysis of 2‐CoCl₂ and 3‐CoCl₂ exhibited a trigonal‐bipyramidal coordination geometry at the metal center, the two chlorine atoms and the nitrogen occupying the equatorial and the phosphane units the apical positions. IR analysis indicated, that in all complexes the pyridine unit is coordinated to the metal center. The cobalt compounds were applied as catalyst precursors for the polymerization of ethene after activation with MAO.     

Fluorimetric Detection of Phosphates in Water Using a Disassembly Approach: A Comparison of FeIII-, ZnII-, MnII- and MnIII-salen Complexes

Details of the reaction sequence used for the fluorimetric detection of phosphates by disassembly of transition metal Schiff base complexes were investigated for [Fe^III(salen)(H₂O)]⁺, [Zn^II(salen)], [Mn^II(salen)(H₂O)₂], and [Mn^III(salen)(H₂O)]⁺. The reactivity of these compounds towards phosphorus oxoanions of differing charge, number of donor atoms and steric hindrance was detected by UV/Vis and fluorescence spectroscopy in both aprotic organic and aqueous media. Selectivity of [Fe^III(salen)(H₂O)]⁺ towards pyrophosphate over all other tested phosphorus-containing analytes was strongly supported. [Zn^II(salen)] showed a faster reactivity but was much less selective. In contrast, [Mn^III(salen)(H₂O)]⁺ proved to be more stable than the iron complex but generally showed little reactivity towards phosphorus oxoanions. The influence of the charge of the central atom was investigated using the Mn^II analogue [Mn^II(salen)(H₂O)₂]. As expected, the reduced charge resulted in a reactivity comparable to the Zn^II complex in organic solution but lead to hydrolysis of the complex in water. Finally, the reaction products of [Fe^III(salen)(H₂O)]⁺ with phosphates were characterized by IR spectroscopy and mass spectrometry, providing further insights into the reaction mechanism of the disassembly process.     

内蒙古牧区蒙、汉族人发铜、锌、铁、锶及钙的X-射线荧光光谱法测定

用X-射线荧光光谱法，测定了387例内蒙古牧区蒙古族、汉族成人和儿童的发中铜(Cu)、锌(Zn)、铁(Fe)、锶(St)及钙(Ca)的含量，对同一地区蒙、汉族成人间，成人及儿童间发中五种元素含量进行了比较分析。结果表明：蒙汉族成人发中Cu，Zn、Fe含量不受种族及饮食习惯的影响，其含量无显著性差异；蒙汉族成人发中Sr和Ca含量存在着相平行的显著差异；牧区儿童发Zn含量与牧区成人发Zn含量差异无显著性意义，提示牧区儿童不缺Zn，可能与多动物性食物有关；牧区儿童发中Cu、Fe、Sr、Ca均显著低于牧区成人、可能与儿童发育旺盛和Zn摄入量高对Cu、Fe吸收发生抑制有关。     

The Limit of Detection of a Reactant,in the Presence of Another,by Kinetic Analysis and Deviation-Pattern Recognition

Abstract

When a solution containing a single reactant is subjected to kinetic analysis with a reagent giving rise to a pseudo-first-order reaction, non-linear regression analysis of the concentrationtime data yields a random scatter of the residuals around the best fit to the pseudo-first-order equation. If the same equation is used when a second reactant is also present, systematic errors arise and yield a deviation plot having a characteristic shape. If the amplitude of that plot is substantially larger than the random error of measurement, the presence of the reactant can be detected, and its concentration can then be evaluated by non-linear regression onto the equation that takes its presence into account. The amplitude passes through a maximum as the relative concentration of the second reactant increases, or as the ratio of the rate constants increases. For any given ratio of concentrations, detection of the second reactant is impossible unless the ratio of the rate constants lies within a certain range, which will be governed by the data-acquisition schedule employed. For the particular schedule assumed here, examination of these dependences shows, for example, that it should be possible to detect the second reactant if its concentration is 2.5 per cent of that of the first reactant and if the ratio of the rate constants is between 7.1 and 21.7.     

HCCI燃烧中NO与异辛烷相互作用简化动力学模型构建与分析

为了分析废气再循环中NO对HCCI燃烧的影响,本文构建了一个新的NO与异辛烷相互作用的化学动力学机理,包括167种组分和835个反应,其中异辛烷分支反应包括112种组分和467个反应。NO分支的子机理是在Anderlohr等人对NO与异辛烷详细机理研究的基础上根据路径分析而得到的。新IC₈H₁₈-NO机理的验证分为:IC₈H₁₈分支机理验证了在激波管中温度范围为855-1269 K,压力范围为2-6 MPa,化学计量比为0.5和1.0条件下的着火延迟时间; IC₈H₁₈-NO机理验证了在HCCI发动机中NO添加浓度为0-500 × 10^-6(体积分数),同时也发现不同的NO添加浓度对IC₈H₁₈的HCCI燃烧的影响有所不同。因此,本文利用CHEMKINPRO软件中的零维单区化学动力学模型,模拟了在不同NO浓度下NO对异辛烷燃烧影响。通过敏感性分析和产率分析,得出了NO添加后对异辛烷燃烧影响的关键性反应为R476。在IC₈H₁₈燃烧初期通过R476产生活性基OH,从而体现对燃烧的促进作用。但是在NO添加浓度较大时,由于NO浓度较大结合活性基(如OH)的能力增强,进而NO对燃烧的促进作用被削弱。     

Construction and Evaluation of a Gold Tubular Electrode for Flow Analysis: Application to Speciation of Antimony in Water Samples

A tubular gold electrode (TGE) is described for the first time by summarizing the important aspects of its construction and evaluation. Applicability of the TGE is evaluated in the speciation of Sb(III) and Sb(V) using anodic stripping voltammetry in a single flow manifold. Studies with surface active interferences and metallic cations were performed. The proposed conditions for antimony determination showed good tolerance towards cationic, anionic and nonionic surface active substances. A linear response for antimony was obtained for solutions containing significant amounts of several metallic cations. Linear calibration curves for Sb(III) were obtained in the range 1–10 ppb with a detection limit of 0.19 ppb (CV=2.91%, n=5, [Sb(III)]=5 ppb). For Sb(V), linear calibration curves were in the range 1–15 ppb with a detection limit of 0.32 ppb (CV=1.41%, n=5, [Sb(V)]=5 ppb). The figures of merit achieved sustain for the good applicability of the proposed method as it allows the determination of antimony at levels below maximum values permitted in consuming waters. Results of antimony concentration determined in water samples were validated against the ICP‐MS reference procedure or compared with reference water samples.     

Preconcentration and Fractionation of Cd, Co, Cu, Ni, Pb and Zn in Natural Water Samples Prior to Analysis by Inductively Coupled Plasma Atomic Emission Spectrometry

The strong cation exchanger Dowex 50W-x4 was used for the enrichment of traces of Cd, Co, Cu, Fe, Ni, Pb and Zn in mineral and mine waters as an alternative to the commonly applied procedures based on the application of chelating resins. The resin used was found suitable for complete retention of these metals both from the solutions of very low pH as well as those close to neutral, thus eliminating the need to buffer the samples. An analytical scheme based on filtration and solid phase extraction with Dowex 50W-x4 was proposed for partitioning Cd, Co, Cu, Fe, Ni and Pb in the examined waters. The fraction of metals associated with the suspended particles was determined after filtration through a 0.45 µm pore size filter and decomposition of the deposited matter. For the evaluation of fractions of the labile metal species and the total dissolved metals, the untreated filtrates and the solutions resulting from their digestion, respectively, were passed through Dowex 50W-x4 cation exchange columns. The retrieval of the metals was completed using a 4.0 mol L⁻¹ solution of HCl. The described metal preconcentration and fractionation protocol offered the enrichment factor of 25 with detection limits equal to 22, 30, 92, 41, 70, 36 and 340 ng L⁻¹, respectively for Cd, Co, Cu, Fe, Ni and Pb. Reasonably good precision and accuracy were attained.     

辉光放电、石墨阴极溅射/瞬变原子化原子吸收光谱测定镉、铬、铜、铁、镁、锰的研究

本文采用辉光放电、石墨阴极溅射/瞬变原子化原子吸收光谱技术研究了Cd、Cr、Cu、Fe、Mg、Mn等元素的分析性能。试验表明,此技术具有灵敏度高、无记忆效应等优点,是一项很有发展前途的痕量分析技术。     

A Water‐Stable Terbium(III)–Organic Framework as a Chemosensor for Inorganic Ions,Nitro‐Containing Compounds and Antibiotics in Aqueous Solutions

Effective detection of organic/inorganic pollutants, such as antibiotics, nitro‐compounds, excessive Fe³⁺ and MnO₄^?, is crucial for human health and environmental protection. Here, a new terbium(III)–organic framework, namely [Tb(TATAB)(H₂O)]?2H₂O ( Tb‐MOF , H₃TATAB=4,4′,4′′‐s‐triazine‐1,3,5‐triyltri‐m‐aminobenzoic acid), was assembled and characterized. The Tb‐MOF exhibits a water‐stable 3D bnn framework. Due to the existence of competitive absorption, Tb‐MOF has a high selectivity for detecting Fe³⁺, MnO₄^?, 4‐nirophenol and nitroimidazole (ronidazole, metronidazole, dimetridazole, ornidazole) in aqueous through luminescent quenching. The results suggest that Tb‐MOF is a simple and reliable reagent with multiple sensor responses in practical applications. To the best of our knowledge, this work represents the first Tb^III‐based MOF as an efficient fluorescent sensor for detecting metal ions, inorganic anions, nitro‐compounds, and antibiotics simultaneously.     

Synthesis of a New Chiral Ligand Containing 1,5—Diazacyclooctane and the Application in Diethyl Zinc Addition to Benzaldehyde

A new chiral tetradentate ligand (S,S)-1,5-bis (4-benzyloxazolin-2-yl-methyl)-1,5-diazacyclo-octane I has been synthesized and the application of 1 as catalyst in the enantioselective addition of diethyl zinc to benzaldehyde is also described.     

Guanidinium Chlorochromate,a New,Efficient, and Mild Oxidizing Agent for Benzylic and Other Alcohols to Carbonyl Compounds in Water and Organic Solvents

Guanidinium chlorochromate (GCC) has been first reported as a new oxidizing agent for the oxidation of a series of benzylic and a number of other aliphatic and aromatic alcohols to carbonyl compounds and quinones respectively in water in the presence of a phase-transfer catalyst and also in an organic solvent such as methylenechloride.

Galvano-Fenton Engineering Solution with Spontaneous Catalyst’s Generation from Waste: Experimental Efficiency,Parametric Analysis and Modeling Interpretation Applied to a Clean Technology for Dyes Degradation in Water

In this paper, the degradation of the diazo dye naphthol blue black (NBB) using the Galvano-Fenton process is studied experimentally and numerically. The simulations are carried out based on the anodic, cathodic, and 34 elementary reactions evolving in the electrolyte, in addition to the oxidative attack of NBB by HO• at a constant rate of 3.35×107 mol−1·m3·s−1 during the initiation stage of the chain reactions. The selection of the operating conditions including the pH of the electrolyte, the stirring speed, and the electrodes disposition is performed by assessing the kinetics of NBB degradation; these parameters are set to 3, 350 rpm and a parallel disposition with a 3 cm inter-electrode distance, respectively. The kinetics of Fe(III) in the electrolyte were monitored using the principles of Fricke dosimetry and simulated numerically. The model showed more than a 96% correlation with the experimental results in both the blank test and the presence of the dye. The effects of H2O2 and NBB concentrations on the degradation of the dye were examined jointly with the evolution of the simulated H2O2, Fe2+, and HO• concentrations in the electrolyte. The model demonstrated a good correlation with the experimental results in terms of the initial degradation rates, with correlation coefficients exceeding 98%.     

Application of a Chelate Forming Calix[4]arene-o-vanillinthiosemicarbazone Resin to the Separation,Preconcentration and Trace Determination of Cu(II), Cd(II) and Pb(II) in Natural Water Samples

A very stable calixarene-based polymeric chelating resin has been synthesized by covalently linking calix[4]arene-o-vanillinthiosemicarbazone through its lower rim to Merrifield resin. It was characterized by FT IR, ¹H NMR and elemental analysis. The resin was efficiently employed to separate and preconcentrate toxic metal ions such as Cu(II), Cd(II) and Pb(II) in a column prior to their determination by UV-Vis spectrophotometry and atomic absorption spectrophotometry (GFAAS) with a relative standard deviation ranging between 1.0–1.4%. Various physico-chemical parameters such as pH, concentration of eluting agents, flow rate, total sorption capacity, metal-ligand stoichiometry, exchange kinetics, preconcentration factor, distribution coefficient, breakthrough capacity, resin stability, effect of electrolytes and associated metal ions have been studied. Uptake and stripping of these metal ions on the resin were fast, indicating better access of the metal ions to the chelating sites. Detection limits (3_B) of 4.22µgL^–1, 11.89µgL^–1 and 19.61µgL^–1, along with preconcentration factors of 100, 125 and 111 for Cu(II), Cd(II) and Pb(II), respectively, were achieved. The proposed method was successfully applied to the separation and trace determination of Cu(II), Cd(II) and Pb(II) from natural water samples of Ahmedabad city.     

[ReIII(thiourea-S)6]Cl3 · 4 H2O and [ReIII(N-methylthiourea-S)6]Cl3 as Precursors to other ReIII Complexes: a Kinetic Study in Aqueous Media. Crystal Structure of [ReIII(N-methylthiourea-S)6](PF6)3 · H2O

Capability of [Re^III(tu-S)₆]Cl₃, where tu = thiourea, as a precursor to other Re^III complexes by ligand substitution in aqueous medium is studied. For the decomposition of [Re(tu-S)₆]Cl₃, experiments suggest pseudo first order kinetics and observed rate constants vary from 1.3 × 10^–2 to 9.6 × 10^–2 min^–1 in the pH range 2.80–5.04. Experiments in presence of incoming ligand (ethylendiaminetetraacetic acid or diethylentriaminepentaacetic acid) show that ligand substitution is significantly slower than decomposition of the precursor, even when pH and temperature are modified. Similar results were obtained working with [Re^III(Metu-S)₆]Cl₃, where Metu = N-methylthiourea. Molecular structure of [Re^III(Metu-S)₆](PF₆)₃ · H₂O was determined by single crystal X-ray diffractometry. The coordination polyhedron around the Re ion is a distorted octahedron. The six methylthiourea ligands are bonded to the metal through the sulfur atoms [bond lengths range from 2.409(2) to 2.451(2) Å].