Fluorimetric Determination of Gatifloxacin in Aqueous,Pure and Pharmaceutical Formulations

Abstract

A spectrofluorimetric method was developed for the determination of gatifloxacin. The emission peak for gatifloxacin was recorded at 495 nm upon excitation at 291 nm. The fluorescence process was pH dependent. The dynamic range for the method was 16–80 ng ml^?1with detection limit of 3.97 ng ml^?1. A linear relationship between the fluorescence intensity and the concentration of gatifloxacin solution was obtained with r ² of 0.9968. The method has successfully applied to the determination of gatifloxacin in pure, authentic and aqueous samples.     

Spectrofluorometric Determination of Drotaverine Hydrochloride in Pharmaceutical Preparations

Abstract

A highly sensitive, spectrofluorometric method was developed for the determination of drotaverine HCl in pharmaceutical preparations. The proposed method is based on the measurement of the native fluorescence of the drug in 0.1 M H₂SO₄ at emission 465 nm after excitation at 295 nm. The relative fluorescence intensity-concentration plot was rectilinear over the range of 0.16–4 µg·ml^?1, with good correlation (r = 0.9999) and a lower limit of detection (LOD) of 0.032 µg·ml?1. The proposed method was successfully applied for the determination of drotaverine HCl in tablets and ampoules with a recovery percentage of 100.42 ± 0.601,99.83 ± 0.82 and 99.43 ± 1.08, respectively, which were in accordance with those obtained by a compendial method.     

Novel Method for Selective Spectrophotometric Determination of Titanium(IV) with Water Extract of Slippery Elm Leaf as a New Reagent

Abstract

A novel spectrophotometric method for the determination of titanium(IV) by using a new reagent, water extract of slippery elm leaf is developed. In 0.05 M hydrochloric acid, titanium(IV) reacts with this reagent to form a yellow product. The formed product shows maximum absorbance at 415 nm with a molar absorptivity value of 0.68×10⁴ l mol^–1 cm^–1 and the method was linear in the 0.2–6 µg ml^?1 concentration range. The detection limit value was found to be 0.0131 µg ml^?1. The proposed method was simple, low cost, selective, and sensitive. It was applied to the analytic samples with satisfactory results.     

Flow-Injection Analysis Based on Extraction and Spectrophotometric Determination of Penicillins with Thiazine Dyes

Abstract

A new method for flow-injection analysis (FIA) for the determination of penicillins based on the extraction and spectrophotometric determination of ion associates with selected thiazine dyes (methylene blue, azure A, and azure B) is proposed. The reaction conditions (c_dye = 2 × 10^?4 mol l^?1, c_KCl = 1 mol l^?1, pH ? 6, λ = 635 nm) were found. The factorial design has been carried out to determine the optimum flow conditions. A wide linear dynamic range of calibration curves (5.1–700 µg ml^?1 for penicillin V with all dyes, R = 0.9985) and good repeatability (e.g., relative standard deviation [RSD] = 4.6–0.6% in this concentration range for the reaction with azure B) were found. The detection limit for penicillin V is 1.5 µg ml^?1, and the determination limit is 5.1 µg ml^?1. The maximum analysis rate is 35 samples per h. The practical samples of pharmaceutics were tested. There are no interferences from the additives in pharmaceutics.     

Catalyzed Determination of Glucose with a Mimic Enzyme Constructed of Bis‐[‐6‐O‐(‐β‐ethyloic‐butanedioic Acid‐1,4‐ester‐4‐)]β‐Cyclodextrin · Fe3+

Abstract

Catalyzed determination of glucose with mimic glucose oxidase is constructed by the reaction of β‐cyclodextrin, maleic anhydride, and chloroacetic acid with iron trichloride in hydrogen peroxide. The method is simple and convenient, and sensitivity and repeatability are ideal. Beer's law is obeyed in a concentration range of 30–197 µg · ml^?1 glucose with an excellent correlation coefficient (r=0.9994), while the detection limit is 4.10 µg · ml^?1, the RSD is 0.98% (n=8). The recovery of sample is 95.8–103.1%.     

A New Spectrophotometric Method for the Determination of Arsenic in Environmental and Biological Samples

Abstract

A simple and selective spectrophotometric method has been developed for the determination of trace amounts of arsenic using azure B as a chromogenic reagent. The proposed method is based on the reaction of arsenic(III) with potassium iodate in acid medium to liberate iodine. The liberated iodine bleaches the violet color of azure B and is measured at 644 nm. This decrease in absorbance is directly proportional to the As(III) concentration, and Beer's law is obeyed in the range 0.2–10 µg ml^?1 of As(III). The molar absorptivity, Sandell's sensitivity, detection limit, and quantitation limit of the method were found to be 1.12×10⁴ l mol^?1cm^?1, 6.71×10^?3 µg cm^?2, 0.02 µg ml^?1 and 0.08 µg ml^?1, respectively. The optimum reaction conditions and other analytical parameters were evaluated. The proposed method has been successfully applied for the determination of arsenic in various environmental and biological samples.     

Comparison of Ion-Pairing and Reversed Phase Liquid Chromatography in Determination of Sulfamethoxazole and Trimethoprim

Abstract

Two simple, rapid, and sensitive HPLC methods have been developed for the simultaneous determination of sulfamethoxazole and trimethoprim in their pure and dosage forms, one utilizing reversed phase HPLC and the other ion-pair HPLC. In the reversed phase HPLC method (A) the mobile phase consists of 0.05% aqueous solution of formic acid with pH adjusted to 4.5±0.2 with triethylamine : acetonitrile:tetrahydrofuran 50 : 49 : 1 (v/v), and the mobile phase pumped at flow rate of 1.0 ml min^?1. An Appolo LC18 column (5.0 µm), 250 mm length × 4.6 mm diameter, was utilized as the stationary phase. Detection was affected spectrophotometrically at 254 nm. In the ion-pair HPLC method (B) the mobile phase consisted of methanol : buffer 35 : 65 (v/v) with the buffer composed of potassium dihydrogen phosphate 0.3 M and sodium heptan sulfonic acid 5.0 mM. To 500 ml of buffer was added 2.0 ml triethylamine, and then the pH was adjusted to 5.0 with phosphoric acid, and the mobile phase was pumped at a flow rate of 1.2 ml min^?1. A Hypersil C₁₈ column (5.0 µm), 150 mm length × 4.6 mm diameter, was utilized as the stationary phase. Detection was affected spectrophotometrically at 254 nm. Linearity ranges for sulfamethoxazole and trimethoprim were 1.0–110 and 1.5–98 µg ml^?1, respectively, with method A and 0.5–100 and 1.0–125 µg ml^?1, respectively, with method (B). Minimum detection limits obtained were 0.1969 and 0.3451 µg ml^?1 for sulfamethoxazole and trimethoprim, respectively, with method A, and 0.1377 and 0.2454 µg ml^?1 with method (B). The proposed methods were further applied to the analysis of tablets containing the two drugs, and the results were satisfied.     

Rapid Flow-Injection Method for the Determination of Colistin by Sensitized Chemiluminescence Using the Acidic Permanganate–Sulfite System

Abstract

A simple, rapid, and sensitive chemiluminescence method for the determination of colistin (Polymyxin E), a cyclic polypeptide with antibiotic effect produced by certain strains of Bacillus polymyxa, has been developed by combining a flow-injection technique and the bacteria's sensitizing effect on the chemiluminescence reaction between sulfite and acidic permanganate. The optimum conditions for chemiluminescence emission were established. The chemiluminescence was proportional to the log of concentration of colistin over the range 4–100 µg mL^?1 (3.5–87 µM). The detection limit was 1.2 µg mL^?1 (1.0 µM) of colistin. The method has been satisfactorily used for the determination of colistin in pharmaceuticals.     

Spectrophotometric Determination of Some Fluoroquinolone Derivatives in Dosage Forms and Biological Fluids Using Ion‐Pair Complex Formation

Abstract

A simple, rapid, sensitive, and reproducible procedure for assaying norfloxacin (NOR), ciprofloxacin (CIP), and ofloxacin (OFL) was investigated. The procedure is based on the reaction of selected drugs with Sudan II (I), Congo red (II), and Gentian violet (III) in universal buffer to give soluble ion‐pair complexes. The effects of various parameters have been studied. Beer's law plots were obeyed in the concentration ranges 0.5–11 µg ml^?1, whereas Ringbom optimum ranges were 0.7–9.5 µg ml^?1. The apparent molar absorptivity (6.4×10⁴ L mol^?1 cm^?1), Sandell sensitivity (4.99 ng cm^?2), detection (0.13 µg ml^?1), and quantification (0.44 µg ml^?1) limits were calculated. The relative standard deviation for ten determinations, for samples containing 4.0 µg ml^?1, was found to be 1.40%. The influence of commonly employed excipients in the determination of the studied drugs was examined. There was no interference from degradate product results from thermal and hydrolytic treatments. The results obtained by the proposed procedure were statistically validated. The developed procedure was successfully applied to the determination of the studied drugs in dosage forms and biological fluids.     

Abilities of Partial Least‐Squares (PLS‐2) Multivariate Calibration in the Analysis of Quaternary Mixture of Food Colors (E‐110, E‐122, E‐124, E‐131)

Abstract

Sunset Yellow (SY), Carmoisine (C), Ponceau 4R (P), and Patent Blue V (PB) are synthetic organic dyes which are under governmental regulations all over the world because of their toxicity and carcinogenicity.

In this study, a simple and fast analytical procedure was proposed for the simultaneous determination of food dyes (SY, C, P, and PB) in powder drinks by means the partial least‐square treatment of spectrophotometric absorbance between 450 –730 nm, taken at 10 nm intervals. The experimental calibration matrix was constructed with 27 samples. The concentration ranges considered were 2, 3, 4 µg · ml^?1 for SY, 7, 8, 9 µg · ml^?1 for C, 9, 10, 11 µg · ml^?1 for P, and 0.3, 0.4, 0.5 µg · ml^?1 for PB. The method was applied to the determination of dyes in different commercially available powder drinks. The results obtained by the application of the PLS‐2 method were statistically compared with those obtained by an HPLC method using the F and t tests. Very similar values were found by two methods. No time consuming pretreatment was needed and this method also provides rapid, accurate and economical analysis of these colors.     

Spectrophotometric Determination of Sparfloxacin in Pharmaceutical Preparations by Ternary Complex Formation with Pd(II) and Eosin

Abstract

A simple, sensitive, and direct spectrophotometric method has been developed for the assay of sparfloxacin in bulk and pharmaceutical preparations. The proposed method is based on the formation of ternary complex between an investigated drug, palladium(II) ion and eosin in the presence of methylcellulose as surfactant and acetate buffer of pH 4.2. Spectrophotometrically, under the optimum conditions, the ternary complex showed absorption maximum at 550 nm, with apparent molar absorptivity of 2.69×10⁴ l mol^?1 cm^?1, Sandell's sensitivity of 0.01458 µg ml^?1 and linearity in the concentration range 1.6–16 µg ml^?1. The composition of the ternary complex was studied by Job's method of continuous variation and the result indicated that the molar ratio of SPFX: Pd: eosin is 1∶1∶1. The optimum reaction conditions and other analytical parameters are evaluated. The proposed method was successfully applied for the determination of SPFX in its pharmaceutical product with mean percentage recoveries of 99.71%. The observed data has been subjected to statistical analysis, which revealed high accuracy and precision.     

Study on Chemiluminescence Assay of Surfactant PEG-400 Using Luminol–Hydrogen Peroxide System

Abstract

Based on the fact that nonionic surfactant polyethylene glycol-400 (PEG-400) catalyzed the chemiluminescence of luminol-H₂O₂ system, a novel and simple chemiluminescence method has been developed for the determination of PEG-400. Under the optimal conditions, the standard curve was Y = 198835X–2091.8, where the correlation coefficient (R) was 0.9999. The detection limit was 4 × 10^?5 g·ml^?1 PEG-400 and the linear range was 1.0 × 10^?4–4.0 × 10^?2g·ml^?1. The relative standard deviation was 3.2% at 2.0 × 10^?3 g·ml^?1 PEG-400 (n = 7). This method has been applied to the determination of PEG-400 in cosmetic samples with satisfactory results. Furthermore, the dynamics characteristic curve of PEG-400 in luminol-H₂O₂ system was compared to typical metallic ion and other surfactants. Moreover, the mechanism of the luminol-H₂O₂-PEG-400 chemiluminescence system was studied, assisted by fluorescence spectra and UV spectra.     

Cathodic Stripping Voltammetric Determination of Tellurium(IV) with in situ Plated Bismuth-Film Electrode

Abstract

A very sensitive and reliable method is proposed for the determination of tellurium(IV) [Te(IV)] by Osteryoung square-wave cathodic stripping voltammetry. This method is based on the reduction of Te(IV) with bismuth(III) onto an edge-plane pyrolytic graphite electrode, followed by a cathodic potential scan. The reduced Te gave a well-defined catalytic hydrogen wave at ?1200 mV vs. Ag/AgCl. The peak height of the catalytic wave was directly proportional to the initial Te(IV) concentration in the concentration ranges of 0.01–0.10 and 0.1–1.0 µg L^?1 with 30 s deposition time. A 3σ detection limit of 1.0 ng L^?1 Te(IV) was obtained with the same deposition time. The relative standard deviation was 3% on replicate runs (n = 5) for the determination of 0.1 µg L^?1 Te(IV). Analytical results of natural water samples demonstrate that the proposed method is applicable to the determination of traces of Te(IV).     

A Rapid,Simple, and Sensitive Spectrophotometric Determination of Traces of Vanadium (V) in Foodstuffs,Alloy Steels,and Pharmaceutical,Water, Soil,and Urine Samples

Abstract

A rapid, simple, sensitive, and selective spectrophotometric method is investigated for the determination of traces of vanadium (V) in foodstuffs, alloy steels, and pharmaceutical, water, soil, and urine samples in aqueous DMF medium. The metal ion forms a green colored complex with 2-hydroxy-3-methoxy benzaldehyde thiosemicarbazone (HMBATSC) in an acidic buffer of pH 6.0. The green colored solution, having an absorbance maximum at 380 nm, is stable for more than 72 hours. Beer's law is obeyed in the range of 0.051–2.037 µg ml^?1. The molar absorptivity and Sandell's sensitivity of the method are found as 2.75 × 10⁴ l mol^?1 cm^?1 and 0.0018 µg cm^?2, respectively. The green colored complex has 1:2 [V(V)-HMBATSC] stoichiometry. The stability constant of the complex is determined as 3.267 × 10¹¹ by Job's method. The optimum reaction conditions and other analytical parameters are studied. A sensitive and selective second-order derivative spectrophotometry has also been proposed for the determination of V(V). The interference of various cations and anions are studied. The present method is successfully applied to the determination of vanadium (V) in foodstuffs, alloy steels, and pharmaceutical, water, soil, and urine samples.     

Rapid and selective determination of osmium(IV) by UV-visible spectrophotometry using o-methylphenyl thiourea as a chromogenic chelating ligand: sequential separation of osmium(IV), rhodium(III) and platinum(IV)

The objective of this research work was to develop a simple, highly sensitive and precise method for spectrophotometric determination of osmium(IV). O-Methylphenyl thiourea (OMPT) coordinates with osmium(IV) as a 1:1 (osmium(IV)–OMPT) complex in hydrochloric acid media (0.8 mol l^?1). The novelty of the investigated method is instant complex formation at room temperature with no need of heating or standing. The complex is stable for more than 8 days. The method is applicable over a wide linearity range (up to 110 µg ml^?1). A low reagent concentration is required (2 ml, 0.009 mol l^?1 in ethanol). The complex exhibits maximum absorption in the range of wavelength 510–522 nm and 514 nm was selected for further study. The molar absorptivity was 1.864 × 10³ l mol^?1 cm^?1, Sandell’s sensitivity was 0.102 µg of osmium(IV) cm^?2. Proposed method was successfully applied for separation and determination of osmium(IV) from binary and ternary synthetic mixtures containing associated metal ions. A scheme for mutual separation of osmium(IV), rhodium(III) and platinum(IV) is developed.     

Ultrasonic-assisted supramolecular solvent-based liquid phase microextraction of mercury as 1-(2-pyridylazo)-2-naphthol complexes from water samples

A separation-preconcentration method based on supramolecular solvent ultrasonic-assisted liquid-phase microextraction (Ss-USA-LPME) for spectrophotometric determination of mercury as 1-(2-pyridylazo)-2-naphthol (PAN) chelates has been established. Red coloured Hg(II)-PAN hydrophobic complex was extracted into the supramolecular phase (1-decanol/THF) at pH 9.5. The extract was separated from aqueous phase by centrifugation, diluted with ethanol and determined by UV–Vis spectrophotometer at λ_max = 560 nm. The influences of important analytical parameters such as pH, amount of PAN, 1-decanol and THF, sample volume and matrix effects for the quantitative recoveries were examined and optimised. Under the optimised experimental conditions, the amount of ligand, 1-decanol and THF were 1.0 × 10^–4 M, 200 µL and 300 µL, respectively. The optimum time of ultrasonic bath and centrifugation were found as 2 min and 5 min. A linear calibration graph was obtained linearly in the concentration ranges of 8.3–1000 µg L^?1. The preconcentration factor was obtained as 20. The limit of detection (LOD) was 2.6 µg L^?1 with the relative standard deviation (RSD) of 2.4% for mercury (C = 100 µg L^?1, n = 7). The validity of the developed Ss-USA-LPME technique was checked with a certified reference material of NIST 1641d. The presented method has been successfully applied to the determination of mercury in water samples.     

Post‐chemiluminescence Method of the Determination of Loperamide Hydrochloride in Human Plasma and Pharmaceutical by Using Dichlorofluorescein as Chemiluminescence Reagent

Abstract

A post‐chemiluminescence (PCL) was observed when loperamide hydrochloride solution was injected into the reaction mixture after the finish of CL reaction of alkaline N‐Chlorosuccinimide (NCS) and dichlorofluorescein. Based on this phenomenon, a simple, sensitive and fast flow injection PCL method was established for the determination of loperamide hydrochloride. The possible mechanism for the PCL reaction was discussed via the investigation of the CL kinetic characteristics, the CL spectra, the fluorescence spectra. The PCL intensity responded linearly to the concentration of loperamide hydrochloride in the range 8.0×10^?10 to 6.0×10^?7 g · ml^?1 with a linear correlation of 0.9995. The detection limit was 4×10^?10 g · ml^?1. The relative standard deviation was 2.4% for 4.0×10^?8 g · ml^?1 loperamide hydrochloride (n=11). This method has been applied to the determination of loperamide hydrochloride in human plasma and pharmaceutical samples with satisfactory results.     

Highly Sensitive Spectrofluorimetric Determination of Trace Amounts of Superoxide Dismutase Using a Prulifloxacin-Terbium(III) Probe

Abstract

A new spectrofluorimetric method was developed for determining superoxide dismutase. The interactions between prulifloxacin (PUFX) –Tb³⁺ complex and superoxide dismutase had been studied by using UV-Vis absorption and fluorescence spectra. Using prulifloxacin–Tb³⁺ as a fluorescence probe, under optimum conditions, superoxide dismutase could remarkably enhance the fluorescence intensity of the prulifloxacin–Tb³⁺ complex at λ = 545 nm, and the enhanced fluorescence intensity was in proportion to the concentration of superoxide dismutase. Optimum conditions for the determination of superoxide dismutase were also investigated. The dynamic range for the determination of superoxide dismutase was 0.032 to 22.56 µg mL^?1, and the detection limit (S/N = 3) was 1.5 ng 4 mL^?1. This method was simple, practical, and relatively free of interference from coexisting substances and could be successfully used to determine superoxide dismutase in the plant and blood samples. The mechanism of fluorescence enhancement of prulifloxacin–Tb³⁺ complex by superoxide dismutase was also discussed.     

Hydrothermal synthesis of fluorescent nitrogen-doped carbon quantum dots from ascorbic acid and valine for selective determination of picric acid in water samples

Nitrogen doped carbon quantum dots (N-CQDs) were synthesised by a hydrothermal method using ascorbic acid and valine as precursors. The as-synthesised N-CQDs were characterised by transmission electron microscopy, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, UV?vis absorption spectra, as well as fluorescence spectrophotometer. The results revealed that the as-prepared N-CQDs were spherical shaped with an average diameter of 4 nm and emitted bright blue photoluminescence with a quantum yield of approximately 4.8 %. Additionally, we found that the fluorescence of the N-CQDs was intensively quenched by the addition of picric acid (PA). The decrease of the fluorescence intensity made it possible to determine PA in the linear range of 0.06–7.81 µg ml^–1 based on the fluorescence resonance energy transfer between PA and N-CQDs. The detection limit was as low as 11.46 ng ml^–1. The proposed approach was further successfully applied for the determination of PA in water sample collected from Fenhe river for public safety and security, suggesting its great potential towards water routine analysis.     

Validation of UV Spectrophotometric Method for Fexofenadine Hydrochloride in Pharmaceutical Formulations and Comparison with HPLC

Abstract

A simple, reproducible, accurate, and effective spectrophotometric method was developed and validated for the quantitation of the antihistamine fexofenadine in capsules and coated tablets. Ethanol was used as solvent and the absorbance at the wavelength of 220 nm was employed to the quantitation of the drug. The method validation was fulfilled through the evaluation of the analytical parameters of linearity, precision, accuracy, limits of detection, and quantitation and specificity. The method was linear (r=0.9999) at concentrations ranging from 8.0 to 20.0 µg ml^?1, precise (RSD intra‐day=0.29; 0.18; 0.39; RSD inter‐day=0.12 for capsules and RSD intra‐day=0.13; 0.16; 0.13; RSD inter‐day=0.13 for coated tablets), accurate (percentage recovery=99.97% for capsules and 100.51% for tablets), sensitive (limits of detection and quantitation of 0.10 and 0.29 µg ml^?1, respectively) and specific. The method was compared to a high performance liquid chromatography (HPLC) method, which was previously developed to the same drug. The results showed no significant difference between the methods in fexofenadine hydrochloride quantitation.