On-Line Preconcentration and Analysis of Metribuzin Residues in Corn Fields by Use of a Molecularly Imprinted Polymer

A molecularly imprinted polymer as a selective solid-phase extraction adsorbent for efficient preconcentration and analysis of metribuzin residues in corn fields has been synthesised and evaluated. Results showed that molecular imprinting of the polymer was highly effective and the polymer had high affinity and selectivity for metribuzin in water-containing systems. A monolithic column containing molecularly imprinted polymer was prepared and used for on-line preconcentration, separation, and detection of metribuzin residues in soil sampled during investigation of the degradation of the herbicide metribuzin in corn fields. The detection limit of the method was 8.3 × 10^?4 mg kg^?1, recovery was between 94.9% and 103%, and RSD in analysis of soil samples was less than 3.2%.     

Poly(lauryl methacrylate-co-1,6-hexanediol ethoxylate diacrylate) modified silica-based dispersive solid-phase extraction for determination of phenylurea herbicides in environmental water samples

In this study, poly(lauryl methacrylate-co-1,6-hexanediol ethoxylate diacrylate) (LMA-HEDA) was synthesised on silanised silica through free-radical cross-linking polymerisation process. The optimal preparation process was obtained by investigating the effects of polymerisation temperature and reaction time. Characterisation of the LMA-HEDA-modified silica was achieved using diffuse reflectance FT-IR. The resulting LMA-HEDA-modified silica was then utilised as a sorbent for dispersive solid-phase extraction (dSPE) of phenylurea herbicides (PUHs) from various environmental water samples. The optimisation of LMA-HEDA-based dSPE process was achieved by investigating the effect of the following parameters including extraction time, pH of sample solution, composition of elution solvent and addition of salt on the extraction recovery of PUHs from water samples. Gradient elution was performed to analyse the extracted PUHs by high performance liquid chromatography (HPLC) with UV-photodiode array detection. Acceptable matrix effect was observed using the proposed LMA-HEDA-based dSPE-HPLC-UV for determining PUHs in environmental water samples. Relatively low detection limits (0.027–0.053 ng mL^?1) and good linearity (0.1–4.0 ng mL^?1; r² > 0.999) for individual PUHs were obtained using the proposed method. The proposed method offered detection limits lower than the allowed permissible level (0.1 ng mL^?1) set by European Union. The enrichment factors of target PUHs were also estimated at 40.3–47.7. Good extraction recoveries (80.1–97.9%) for PUHs-spiked water samples were obtained with relative standard deviations lower than 8.7%. The intra-day/inter-day precision (0.7–4.6%/0.2–5.9%) and accuracy (96.7–104.2%/95.3–103.6%) of the proposed method were also evaluated in this study. In addition, the applicability of the developed method was demonstrated by the measurement of PUHs in various environmental water samples.     

Nonderivatized Sarcosine Analysis by Gas Chromatography after Solid-Phase Microextraction by Newly Synthesized Monolithic Molecularly Imprinted Polymer

In this study, a simple method for analysis of nonderivatized sarcosine was developed by gas chromatography. It is based on solid-phase microextraction of sarcosine on a novel synthesized solid-phase microextraction (SPME) fiber. A monolithic SPME fiber was fabricated based on a molecularly imprinted polymer that could be coupled with gas chromatography for extraction and determination of sarcosine. Extraction time, pH, and ionic strength were investigated as important factors in the extraction procedure. The fabricated fiber was firm, inexpensive, stable, and selective, which are vital characteristics for SPME. The selectivity of the fabricated fiber in relation to analog compounds was also investigated. Under optimum conditions, the calibration curve was linear in the range of 1–100 mg L⁻¹ (R ² = 0.987). High extraction efficiency for sarcosine was obtained with a detection limit of 0.37 mg L⁻¹. The fabricated fiber was successfully applied for SPME of sarcosine from urine after its extraction, followed by gas chromatography flame ionization detector analysis.

     

Extraction of Anthraquinones from Rhubarb by a Molecularly Imprinted–Matrix Solid-Phase Dispersion Method with HPLC Detection

A simple method based on matrix solid-phase dispersion for selective extraction of anthraquinones from rhubarb samples was developed using a molecularly imprinted polymer as sorbent. The molecularly imprinted polymer was prepared using emodin as the template molecule, methacrylic acid as the functional monomer, and ethylene glycol dimethacrylate as the cross-linking agent. The polymer was characterized by scanning electron microscopy and Fourier-transform infrared spectrometry. Isothermal adsorption and dynamic adsorption experiments were performed. The best extraction conditions for anthraquinones were obtained at a ratio of molecularly imprinted polymer to sample of 1:1, a dispersion time of 5 minutes, with 5% aqueous methanol as the washing solvent, and an elution solvent of methanol-acetic acid (99:1, v/v). Once the matrix solid-phase dispersion process was optimized, the extract was reacted with 8% hydrochloric acid for hydrolysis. The anthraquinones extracted from rhubarb were determined by liquid chromatography. The detection limits of chrysophanol, emodin, physcion, and aloe-emodin were 0.23, 0.24, 0.28, and 0.27 µg mL^?1, respectively. The proposed method was compared with the method in Chinese pharmacopoeia, and the results show that the extraction yield of anthraquinones obtained by molecularly imprinted polymer–matrix solid-phase dispersion method was higher. Moreover, the proposed method is faster and simpler and can achieve extraction and purification in the same system.     

Simultaneous extraction and determination of pharmaceuticals and personal care products (PPCPs) in river water and sewage by solid-phase extraction and liquid chromatography-tandem mass spectrometry

This study features the simultaneous extraction and quantification of 18 pharmaceuticals and personal care products (PPCPs). This is a pioneering method for the quantification of acetaminophen, sulfamethoxazole, diclofenac, atenolol, metoprolol, diethyltoluamide and oxybenzone in atmospheric pressure chemical ionisation mode. The method was validated for high repeatability and reproducibility with relative standard deviations less than 10%. Instrument quantification limits for PPCPs were within the range of 0.05–1.0 µg L^?1, and the method quantification limits (MQLs) for ultrapure water were within the range of 0.3–15 ng L^?1. All samples were extracted using Oasis© hydrophilic–lipophilic balanced cartridges with optimised sample size and extraction conditions. Good accuracy was demonstrated, with solid-phase extraction recoveries above 80% for most PPCPs. In environmental matrices, the MQLs for river water, sewage treatment plant (STP) effluent and STP influent were 4–25, 10–153 and 38–386.5, respectively. The method was successfully applied to investigate occurrences of persistent PPCPs in Malaysian river and sewage samples.     

Solid-Phase Extraction of Caffeine and Theophylline from Green Tea by a New Ionic Liquid-Modified Functional Polymer Sorbent

The new ionic liquid-modified polymer sorbent was developed by surface chemical modification of the synthesized polymer particles using ionic liquids. The obtained ionic liquid-modified polymer was successfully used as a special sorbent in a solid-phase extraction (SPE) process to isolate caffeine and theophylline from green tea. A comparison of different SPE cartridges using the blank polymer, C₁₈, and ionic liquid-modified polymer revealed that the highest recovery was obtained using ionic liquid-modified polymer sorbent. Quantitative analysis was carried out by using a C₁₈ column (5 µm, 150 × 4.6 mm) as an analytical column. Good linearity was obtained from 5 × 10^?4 to 0.5 mg/mL (r²>0.999) for the two analytes with relative standard deviations <4.5%.     

Solid-phase microextraction of chlorpyrifos in fruit samples by synthesised monolithic molecularly imprinted polymer fibres

A monolithic solid-phase microextraction (SPME) fibre was fabricated based on a molecularly imprinted polymer that could be coupled with gas chromatography for extraction, and determination of chlorpyrifos. The time of extraction, pH, temperature and ionic strength were investigated as important factors on the extraction procedure. The fabricated fibre was firm, inexpensive, stable and selective which gave it vital importance in SPME. The selectivity of the fabricated fibre in relation to analogue compounds was also investigated. Under the optimum conditions, the calibration curve was linear in the range of 1–20 mg L^?1 (R² = 0.9899). The high extraction efficiency was obtained for chlorpyrifos with a detection limit of 0.23 mg L^?1. The fabricated fibre was successfully applied to SPME of chlorpyrifos from apple and grape fruits after its extraction and followed by gas chromatography-flame ionisation detector analysis.     

Bamboo Charcoal as Solid-Phase Extraction Adsorbent for the Determination of Organophosphorus Pesticides in Water Samples by High-Performance Liquid Chromatography

In this paper, bamboo charcoal was successfully developed for the solid-phase extraction adsorbent for the determination of six organophosphorus pesticides in water samples. After the bamboo charcoal was pretreated and packed in the solid-phase extraction cartridge, the organophosphorus pesticides in water samples were carried out the solid-phase extraction. To establish a perfect solid-phase extraction procedure, the experimental conditions including the eluent, eluent volume, pH of the sample, flow rate of the sample, and loading volume of the sample were all investigated. When 100 mL water samples in the pH range of 6–7 were loaded with the flow rate of 2.5 mL · min^?1 and then eluted with 10 mL acetonitrile, the proposed extraction method was validated by the recovery, correlation coefficient (R²), repeatability (RSD, n = 7) and LODs, which were 69.6–93.4%, 0.9982–0.9998, 2.9–5.6%, and 0.08–1.04 µg · L^?1, respectively. Furthermore, the analysis of the tap, snow, and river water samples demonstrated the feasibility of the proposed SPE method for real water samples. Based on the aforementioned factors, it could be concluded that bamboo charcoal was a good solid-phase extraction adsorbent, and this proposed solid-phase extraction method was suitable for the effective enrichment and determination of the organophosphorus pesticides in water samples.     

Solid-phase extraction using a molecularly imprinted polymer for the selective purification and preconcentration of norfloxacin from seawater

Abstract

A highly selective and effective method for the purification and preconcentration of norfloxacin (NFX) in seawater samples was developed based on molecularly imprinted solid-phase extraction (MISPE). The molecularly imprinted polymer was synthesized by precipitation polymerization. Methacrylic acid (MAA) and ethylene glycol dimethacrylate (EGDMA) were used as the functional monomer and crosslinker, respectively. The resulting molecularly imprinted polymer (MIP) showed high adsorption for NFX and was selective for its solid-phase extraction. An offline MISPE method followed by high performance liquid chromatography with diode array detection was established for the determination of NFX in seawater. The recoveries of spiked seawater samples using the MISPE columns were satisfactorily higher than 77.6%. The relative standard deviation was less than 5.60%, and the limit of detection was 0.027?μg L^?1. Four seawater samples obtained from the Bohai Sea were analyzed, and NFX was found only at one location at a concentration of 0.280?μg L^?1.     

Synthesis and Application of Histidine-Modified Poly(Glycidyl Methacrylate/Ethylene Glycol Dimethacrylate) Sorbent for Isolation of Caffeine from Black and Green Tea Samples

This work presents the synthesis of a polymeric mixed-mode solid-phase extraction (SPE) sorbent for clean-up and isolation of caffeine from black and green tea samples. The material was synthesized by a simple thermally initiated copolymerization of glycidyl methacrylate and ethylene glycol dimethacrylate. Further functionalization was executed with histidine (HIS). Functional groups were investigated by attenuated total-reflection infrared spectroscopy. Furthermore, nitrogen sorption porosimetry was executed and revealed surface areas of 90 m² g^??1. Adsorption capacities for caffeine were compared between functionalized and non-modified polymers and showed maximum capacities of 3.01 and 4.82 mg g^??1 polymer, respectively. Time adsorption profiles revealed an equilibrium adsorption after 15 min. The proposed polymer was used for SPE of black and green tea extracts and showed excellent clean-up efficiency for isolation of caffeine with recoveries ranging from 89 to 93%. When compared to commercially available Oasis HLB, the HIS-functionalized polymer demonstrated a distinctly better performance for clean-up. Finally, the proposed method was validated regarding international (ICH) guidelines and regulations.     

Analysis of sulfamerazine in pond water and several fishes by high-performance liquid chromatography using molecularly imprinted solid-phase extraction

The synthesis and evaluation of a molecularly imprinted polymer (MIP) used as a selective solid-phase extraction sorbent and coupled to high-performance liquid chromatography (HPLC) for the efficient determination of sulfamerazine (SMR) in pond water and three fishes are reported. The polymer was prepared using SMR as the template molecule, methacrylic acid as the functional monomer and ethylene glycol dimethacrylate as the crosslinking monomer in the presence of tetrahydrofuran as the solvent. The SMR-imprinted polymers and nonimprinted polymers were characterized by FT-IR and static adsorption experiments. The prepared SMR-imprinted material showed a high adsorption capacity, significant selectivity and good site accessibility. The maximum static adsorption capacities of the SMR-imprinted and nonimprinted materials for SMR were 108.8 and 79.6 mg g⁻¹, respectively. The relative selectivity factor of this SMR-imprinted material was 1.6. Several parameters influencing the solid-phase extraction process were optimized. Finally, the SMR-imprinted polymers were used as the sorbent in solid-phase extraction to determine SMR in pond water and three fishes with satisfactory recovery. The average recoveries of the MIP-SPE method were 94.0% in ultrapure water and 95.8% in pond water. Relative standard deviations ranging from 0.3% to 5.2% in MIP were acquired. The results for the SMR concentrations in crucian, carp and wuchang fish were 66.0, 127.1 and 51.5 ng g⁻¹, respectively. The RSDs (n = 5) were 3.51%, 0.53% and 5.08%, respectively. The limit of detection (LOD) for SMR was 1 ng g⁻¹ and the limit of quantitation (LOQ) was 3.5 ng g⁻¹.     

Quantification of Tricyclic and Nontricyclic Antidepressants in Spiked Plasma and Urine Samples Using Microextraction in Packed Syringe and Analysis by LC and GC-MS

In this paper, a highly selective Sudan IV molecularly imprinted polymer was synthesized by surface molecular imprinting technique in combination with a sol?Cgel process using ??-aminopropyl triethoxysilane as functional monomer, tetraethoxysilane as cross-linker and activated silica gel as support material. The imprinted polymer was characterized by FT-IR spectra, scanning electron micrograph and adsorption experiments and it was exhibited good recognition and selective ability, offered a faster rate for the adsorption of Sudan IV. Using the imprinted material as sorbent, a solid-phase extraction coupled with high-performance liquid chromatography method for determination of trace Sudan IV was presented. The detection limit (S/N = 3) was 25.2 ng L^?1, and the RSD for five replicate was 2.86%. With a loading flow rate of 2.5 mL min^?1 for loading 30 mL, an enrichment factor of 104 was achieved. This method was applied for extraction and determination of chilli powder and duck egg samples with good recoveries ranging from 85.3 to 98.1%.     

Synthesis of a novel molecularly imprinted polymer based on functionalized multi-walled carbon nanotubes for selective extraction of sulfadiazine prior to spectrophotometric determination

A novel and efficient sulfadiazine imprinted polymer was synthesized via co-precipitation method and successfully grafted on magnetic multi-walled carbon nanotubes. The synthesized magnetic imprinted polymer was characterized by scanning electron microscopy, Fourier transform infrared spectroscopy, X-ray powder diffraction analysis, thermal analysis and applied as a sorbent for selective magnetic solid-phase extraction of sulfadiazine. The retained sulfadiazine was eluted by 150.0 µL methanol/acetic acid (6:4) solution and quantified by fiber optic linear array spectrophotometry via formation of a detectable azo dye. All parameters affecting the extraction of sulfadiazine were investigated and optimized. Under the optimized conditions, the method exhibited a linear dynamic range of 2.0–50.0 µg L^?1 with a detection limit of 0.56 µg L^?1 and enrichment factor of 300.0. The relative standard deviation at 30.0 µg L^?1 of sulfadiazine (N = 6) was 2.8 and 4.6% for intra-day and inter-day, respectively. The method was successfully applied to determine sulfadiazine in human urine, honey, milk and environmental water samples.     

Validation of QuEChERS-based UPLC-MS/MS method for determination of quinoid niclosamide (LDS) residue in water,soil and rice samples

A sensitive, rapid and easy analytical method was validated for the determination of quinoid niclosamide (LDS) molluscicide in water, rice and soil using a QuEChERS extraction procedure and ultra-performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS) detection. The LDS was extracted by using acetonitrile and then cleaned up by using dispersive solid-phase extraction with florisil and C18 sorbents. The determination of the target compound was achieved in less than 3 min using an electrospray ionisation source in negative mode. The overall average recoveries for this method in water, rice and soil matrix at three fortified levels ranged from 82.54 to 99.9%, with relative standard deviations in the range of 1.51 to 4.86% (n = 5). The calculated limits of detection were lower than 0.1 µg kg^?1 and quantification was 5 µg kg^?1; these values were much lower than the maximum residue levels established by the Australian standard (0.01 mg kg^?1). The results of the method validation confirmed that this proposed method is convenient and reliable for the determination of LDS molluscicide in water, rice and soil samples.     

Molecular Imprinting-Chemiluminescence Sensor for the Determination of Amoxicillin

The amoxicillin-imprinted polymer was synthesized with methacrylic acid (MAA) as a functional monomer and ethylene glycol dimethacrylate (EGDMA) as a cross-linker. The binding characteristic of the imprinted polymer to amoxicillin was evaluated by equilibrium binding experiments. Using the imprinted polymer as recognition material, 3-(3′-nitrophenyl)-5(2′-sulfonylphenylazo)-rhodanine (4NRASP) was synthesized by the authors and was used as chemiluminescence (CL) reagent. A novel chemiluminescence (CL) sensor for the determination of amoxicillin was developed based on the CL reaction of amoxicillin with potassium permanganate in an acidic medium. The sensor displayed excellent selectivity and high sensitivity. The linear response range of the sensor was from 5.0 × 10^?9 to 1.0 × 10^?6 g · mL^?1 (r = 0.9985) and the detection limit was 1.3 × 10^?9 g · mL^?1. The relative standard deviation for the determination of 1.0 × 10^?7 g · mL^?1 amoxicillin solution was 1.7% (n = 11). The sensor was applied to the determination of amoxicillin in urine samples with satisfactory results.     

A molecularly imprinted polymer for solid phase extraction of allantoin

We describe a molecularly imprinted polymer (MIP) for the solid-phase extraction of the skin protectant allantoin. The MIP was deposited on the surface of monodisperse silica microspheres possessing acroyl groups on the surface (MH-SiO₂). The resulting MIP microspheres (MH-SiO₂@MIP) showed a 3.4-fold higher adsorption capacity and a 1.9-fold better selectivity for allantoin than the respective non-imprinted polymer (MH-SiO₂@NIP). The monolayer adsorption capacities of the MH-SiO₂@MIP and the MH-SiO₂@NIP were calculated with the help of the Langmuir model and found to be 6.8 and 1.9 mg?g^?1, respectively. Adsorption kinetics fit a pseudo-second order rate mechanism, with an initial adsorption rate of 1.44 for the MH-SiO₂@MIP, and of 0.07 mg?g^?1?min^?1 for the MH-SiO₂@NIP. The material can be regenerated, and its adsorption capacity for allantoin remains stable for at least five regeneration cycles. It was successfully used as a sorbent for the selective solid-phase extraction of allantoin from Rhizoma dioscoreae.

Determination of Melamine in Food by SPE and CZE with UV Detection

A novel method for the determination of melamine residue in food was developed using solid-phase extraction and capillary zone electrophoresis with UV detection. Spiked samples were extracted with 1% trichloroacetic acid while 0.03 g sodium deoxycholate was used to precipitate protein in the real samples. After centrifuging and clean-up by solid-phase extraction cartridge, the extract was directly analyzed by CZE–UV. The method was validated and good results were obtained with respect to precision, repeatability and spiked recovery. The limit of detection for melamine varied between 0.25 and 0.5 mg kg^?1. The proposed method was successfully applied for the analysis of melamine in food with total recoveries ranging from 94 to 102% in the spiked range of 0.5–5 mg kg^?1, and the relative standard deviations were between 1.5 and 4.1%.     

Determination of tetracyclines in milk samples by magnetic solid phase extraction flow injection analysis

A method is presented for magnetic solid phase extraction (MSPE) of tetracyclines in milk samples. The method involves the extraction and clean-up by silica based magnetic support dispersion on non-pretreated milk samples, followed by the magnetic isolation and desorption of the analytes by acidified methanol. The tetracyclines eluted from the magnetic support were determined simultaneously by flow injection analysis with spectrophotometric detection. Under optimal conditions, the linear range of the calibration curve ranges from 0.03 to 0.60 mg L^?1, with a limit of detection of 10 μg L^?1. Recoveries were determined for milk spiked at levels from 0.15 to 0.60 mg L^?1. Average recoveries ranged from 91.0 to 97.0%, with a precision of <5.0% in all cases. The method was validated by comparing the results with those obtained by MSPE-HPLC and SPE-HPLC. No significant differences were observed (p?<?0.05)     

Determination of organotin compounds (OTC) at low levels in seawater by solid-phase extraction (SPE) and gas chromatography-pulsed flame photometric detection (GC-PFPD)

In this work, a simple, sensitive and affordable analytical method for the simultaneous determination of nine organotin compounds (butyltins, phenyltins and methyltins) in seawater using solid-phase extraction (SPE) and gas chromatography-pulsed flame photometric detection was developed and validated. The performance of three different SPE cartridges (Envi C₁₈, Oasis HLB and Oasis MCX) and three elution solvents of different polarity (hexane, methanol and acetonitrile) was evaluated. The extraction parameters, such as solvent volume, presence of complexing and ion-pairing reagents, sample volume and pH and breakthrough volume, were also investigated. Tributyltin, as the organotin compound of special interest, was efficiently extracted using any of the cartridges and solvents tested. However, the simultaneous extraction of all nine organotin compounds was the most efficient using reversed-phase Envi C₁₈ cartridge and 0.1% (w/v) tropolone in methanol as eluent. The optimised method resulted in good recovery, precision and linearity for all compounds, particularly for tri- and disubstituted species. Method detection limits ranged from 0.22 to 1.27 ng(Sn) L^?1 for butyltins, 0.37 to 4.91 ng(Sn) L^?1 for phenyltins and 0.45 to 1.16 ng(Sn) L^?1 for methyltins. The accuracy of butyltins determination was further verified by the comparison with purchased derivatised standards. The developed method was successfully applied to the environmental samples.     

Application of a new nanoporous sorbent for extraction and pre-concentration of lead and copper ions

The authors describe a method for the trace determination of copper (II) and lead (II) in water and fish samples using solid-phase extraction via siliceous mesocellular foam functionalised by dithizone. Siliceous mesocellular was functionalised with dithizone, and the resulting sorbent was characterised by scanning electron microscopy, surface area analysis, thermogravimetric/differential thermal analysis and FTIR. Following solid-phase extraction of target ions by the sorbent, copper and lead ions were quantified by flame atomic absorption spectrometry. Factors affecting the sorption and desorption of target ions by the sorbent were evaluated and optimised. The calibration plot is linear in the 1 – 500 μg L^?1 copper (II) and 3–700 μg L^?1 lead (II) concentration range. The relative recovery efficiency in real sample analysis is in the range from 96 to 102%, and precision varies between 1.7 and 2.8%. It is should be noted that the limits of detection for the copper and lead analysis were 0.8 and 1.6 μg L^?1, respectively. Also, the adsorption capacities for copper and lead ions were 120 and 160 mg g^?1, respectively. The obtained pre-concentration factor for the lead and copper ions by the proposed solid-phase extraction was 75. The method was successfully applied to the determination of low levels of copper (II) and lead (II) in tap, Caspian sea, Persian gulf and lake water and also their detection in fish samples.