AROMATIC AND HETEROCYCLIC NITRILES AND THEIR POLYMERS ⅩⅦ. THE POLYMERIZATION KINETICS OF CYANOPYRIDINES AND CHARACTERIZATION OF THE FORMED POLYMER*

The polymerization rates of three cyanopyridines catalyzed by cuprous chloride-zinc system are measured, and the structure of the formed polymer is also determined. Compared with aromatic nitrile, cyanopyridines polymerize faster and form polyconjugated polymer with skeleton—(C=N)—_n instead of triazine structure. This chain-polymer possesses semiconductive property, and can be converted into conductive material by thermal treatment. In addition, the polymerization kinetics of 3-cyanopyridine catalyzed by 3-cyanopyridinium perchlorate is investigated. It is found that the polymerization rate is directly proportional to the concentrations of monomer and catalyst, and the activation energy of the polymerization is 103.1 KJ/mol.     

AROMATIC AND HETEROCYCLIC NITRILES AND THEIR POLYMERS XIX:THE POLYMERIZATION OF SUBSTITUTED BENZONITRILES CATALYZED BY COBALTIC ACETYLACETONATE

The polymerization kinetics of 4, 4'-biphenyldicarbonitrile and other substituted ben-zonitriles catalyzed by cobaltic acetylacetonate was studied. The structure of polymer ofdifferent substituted benzonitrile was also determined. It is found that the rate of polymeri-zation and the structure of polymer is greatly affected by the substituent of benzonitriles.     

AROMATIC AND HETEROCYCLIC NITRILES AND THEIR POLYMERS ⅩⅥ. THE POLYMERIZATION KINETICS OF 4, 4′-BIPHENYLDICARBONITRILE CATALYZED BY LEWIS ACID-METAL SYSTEM

The polymerization kinetics of 4, 4′-biphenyldicarbonitrile using cuprous chloride-zinc system as catatyst was investigated. the concentration of unreacted cyano group was measured by infrared spectroscopic analysis using potassium ferricyanide as the internal reference. It was found that the polymerization rate is directly proportional to the concentrations ofcyano group, cuprous chloride and zinc, and the activation energy of the polymerization is as Tow as 18.4 KJ/mol. In addition, the other kinetics parameters were obtained and discussed.     

THE AROMATIC AND HETEROCYCLIC DINITRILES AND THEIR POLYMERS. Ⅸ. THE POLYMERIZATION KINETICS OF 4, 4''-BIPHENYLDICARBONITRILE*

The polymerization kinetics of 4,4'-biphenyldicarbonitrile catalyzed by complex of 4,4'-biphenyl-dicarbonitrile with ZnCl_2 was studied. The cyano group concentration was measured by infrared spectroscopic analysis using potassium ferricyanide as the internal reference. The results proved that the polymerization is a second order reaction, and the activation energy of polymerization is 12.4 kcal/mol. The polymerization rates of 4,4'-biphenyldicarbonitrile catalyzed by other seven complexes were also measured. The polymerization mechanism was discussed.     

AROMATIC AND HETEROCYCLIC NITRILES AND THEIR POLYMERS ⅩⅧ. THE POLYMERIZATION KINETICS OF BENZONITRILE CATALYZED BY METAL ACETYLACETONATE

The bulk polymerization of benzonitrile catalyzed by Co(Ⅱ), Co(Ⅲ) and Fe(Ⅲ) acetylacetonate was studied. The results of kinetics study show that the rate of polymerization was proportional to first power of the concentration of catalyst and second power of the concentration of monomer.     

AROMATIC AND HETEROCYCLIC DINITRILES AND THEIR POLYMERS ⅩⅢ. POLYMERIZATION KINETICS OF BENZONITRILE AND THE STRUCTURE OF PRODUCTS

The polymerization kinetics of benzonitrile were studied, and the formation rate constants of s-triazine structure and linear polymer were determined. The influence of polymerization temperature and the amount of zinc chloride as catalyst on the ratio of linear to cyclic structure were also investigated, and the obtained results were discussed.     

AROMATIC AND HETEROCYCLIC DINITRILES AND THEIR POLYMERS. Ⅺ. STUDY ON THE POLYMERIZATION OF AROMATIC AND HETEROCYCLIC DINITRILES BY INFRARED SPECTROSCOPY*

The polymerization rates of fourteen aromatic and heterocyclic dinitriles were measured by infraredspectroscopy and compared with that of 4, 4′-biphenyldicarbonitrile. The rate is greatly enhancedwhen an electron withdrawing group is substituted at the para position of cyano group in aromaticdinitriles. The polymerization rates of heterocyclic dinitriles wer discussed in terms of π-lectrondensity of the heterocyclic rings.     

THE POLYMERIZATION OF AROMATIC AND HETEROCYCLIC DINITRILES

This review is a concise survey about the works in our laboratory on the polymerization of aromatic and heterocyclic dinitriles, including the polymerization kinetics and mechanism, synthesis of heterocyclic dinitriles, the structure of polymers, and the correlation between the structures of dinitriles and polymerization rates and thermal performances of Polymers.     

EFFECT OF pH ON THE ADSORPTION OF p-AMINOBENZOIC ACID ON POLYSTYRENE-BASED ADSORBENTS

In the present study the adsorptive properties of p-aminobenzoic acid with hypercrosslinked and multi-functional polymeric adsorbents at different solution pHs were systematically investigated in accordance with the particular physicochemical characteristics of the aromatic amphoteric compound involving both Lewis acid and Lewis base functional groups. It was found that the equilibrium adsorption data of the three polymeric adsorbents fitted well in the Langmuir and Freundlich isotherm equations. Studies at various pH levels indicate that the capacity of the adsorbents for adsorption of the ionic forms of adsorbate is less than that for the corresponding neutral species. At pH 3.78, the adsorption capacities of the three adsorbents are the highest. Whereas the adsorption property of multi-functional polymeric adsorbent NJ-99 is the largest, which may be attributed to the strong hydrogen-bonding interaction between the amino groups on the resin and the carboxyl group of p-aminobenzoic acid. The trend of the adsorption capacities of the three adsorbents towards p-aminobenzoic acid with the solution pH is in accord with the dissociation curve of the neutral molecular p-aminobenzoic acid. The adsorption forces include π-π interaction, hydrogen-bonding interaction and electrostatic attraction or repulsion when there exist the molecular and ionic adsorbing species at different pHs in aqueous solution.     

Lewis acid/base modulation in β-diiminate zinc-catalyzed switchable ring-opening polymerization of rac-lactide

Two β-diiminate zinc complexes were prepared and found to show high activity and well-controlled catalytic behavior in the ring-opening polymerization of rac-lactide. Coordination of the Lewis acid to the zinc complexes completely terminated the polymerization. The coordinated Lewis acid was easily cleaved by using a Lewis base, so that the polymerization could resume.Thus, switchable polymerization could be realized by the subsequent addition of a Lewis acid and a Lewis base. This work provides a new strategy to control the ring-opening polymerization of rac-lactide.     

THE PROCESS OF THE EMULSIFIER-FREE POLYMERIZATION IN THE PRESENCE OF BARIUM SULFATE POWDER

The process of emulsifier-free copolymerization of the Styrene-Butyl Acrylate-K_sS_sO_s-water in thepresence of Barium Sulfate(BS)powder was investigated under varied conditions within the range of BSpowder quantity,initiator concentration and reaction temperature.Experimental results showed thatthe rate of polymerization is proportional to 0.3-power of the BS quantity and 1.3-power of theinitiator concentration.There is a linear relationship of 2/3-power for the conversion and time.Aprocess for the polymerization is propose to explain the experimental results.     

MECHANISM FOR THE INITIATION OF ACRYLONITRILE POLYMERIZATION BY POLYPROPYLENE-BASED POLYAMIDOXIME-THIOUREA COMBINATION

Polymerization of acrylonitrile (AN) in aqueous nitric acid initiated by polypropylene-based polyamidoxime (PPAO)-thiourea (TU) combination has been investigated. The overall rate of polymerization (R_p) under the conditions of [TU]/[PPAO]<0.5 molar ratio isThe molecular weights of the polymers were found to be inversely proportional to 3/2-power of nitric acid concentration and 1-power of thiourea concentration. In addition, it is independent with the concentrations of monomer and PPAO, and decreases with increasing temperature.On the basis of these experimental results, a coordination-proton transfer mechanism for the initiation was proposed and discussed.     

ELECTROCHEMICAL POLYMERIZATION OF ANILINE IN PHOSPHORIC ACID AND THE PROPERTIES OF POLYANILINE

The behavior of the electrochemical polymerization of aniline in a weak acid, phosphoric acid, is very similar to that in strong acids, i.e. its polymerization rate increases quickly with the electrolysis time. The FTIR spectra of polyaniline samples synthesized in phosphoric acid indicate that the counter ion H2PO4^- is present in both the oxidized form and the reduced form of polyaniline. The counter ion plays an important role in adjusting the pH value at the electrode surface of polyaniline during the oxidation and reduction processes. As a result, a pair of redox peaks still appear in cyclic voltammograms of polyaniline in a solution of sodium sulfate of pH 5.5 and in a solution of NaH2PO4 of pH 7.0,respectively, at low potential scan rate; and the color of polyaniline film also changes with applied potential at pH 7.0. Thus,the pH region for the electrochemical activity and the electrochromism of polyaniline is extended to pH 5.5 for a solution of sodium sulfate and to pH 7.0 for a solution of NaH2PO4. The conductivity of polyaniline is 3.3 S cm^-1, depending on the concentration of phosphoric acid used in the stage of polymerization of aniline. The result of elemental analysis of polyaniline is presented here.     

THE BIMODAL MOLECULAR WEIGHT DISTRIBUTION OF cis-POLYBUTADIENE POLYMERIZED WITH LANTHANIDE COMPLEX CATALYSTS

The variation of the molecular weight and molecular weight distribution of cis-polybutadiene in the course of polymerization catalyzed by lanthanide complex composed of triisobutyl aluminium or diisobutyl aluminium hydride was investigated by osmometry, viscometry and size exclusion chromatography. By analyzing the experimental data, the reasons of the appearance of himodal molecular weight distribution were elucidated and the possible mechanisms of polymerization were discussed.     

PHOTOSENSITIVITY OF Ce (Ⅳ) INITIATED METHYL ACRYLATE POLYMERIZATION

The influences of UV light irradiation (313 nm) and diffused daylight on the polymerization of methyl acrylate initiated by the ceric ammonium nitrate without any reducing agent have been studied both in aqueous nitric acid and in pure water. The rate of polymerization was found to be accelerated and the overall activation energy and the induction time were found to be decreased sharply by the UV light irradiation. Under UV light, the rate of polymerization is 8 times as high as the rate in dark. The rate of polymerization was found to attain a maximum with the increase of nitric acid concentration and the rate of polymerization became less sensitive to UV light in the presence of nitric acid whereas the induction period reduced outstandingly. Based on the experimental results, the mechanism is proposed.     

IONIC CONDUCTIVITY IN THE COMPLEXES OF COMB-SHAPED POLYETHER WITH LITHIUM AROMATIC SULFONATE

Complexes of comb-shaped polyether and lithium aromatic sulfonates bearing different negative charge number were prepared by in situ thermal polymerization. Their conductivity depends deeply on salt content, ambient temperature and negative charge number of the added salts. Results show that anions can be partly immobilized by increasing their negative charges at lower temperature. Against discharge time the short circuit current of the battery (Li/complex film/Li_x V_3O_8) is stabilized by increasing the anionic charge number of the complex.     

AN INVESTIGATION ON KINETICS AND REACTIVE SPECIES IN ANIONIC TELOMERIZATION OF BUTADIENE INITIATED BY n-BUTYLLITHIUM/N, N, N'''', N''''-TETRAMETHYLETHYLENE DIAMINE

The polymerization rate of butadiene in toluene initiated by n-butyllithium and tetramethyl ethy-lene diamine as well as the micro-structure and degree of association of polybutadiene were deter-mined. The effect of TMEDA/n-BuLi (abbr. A/Li) and temperature on the polymerization rate,molecular weight, molecular weight distribution and structure of polybutadiene was investigated. Ac-tivation energy of the propagation reaction and chain transfer reaction, together with the chain trans-fer reaction rate constant were estimated. Kinetic parameters and contribution of different reactivespecies to polymerization rate were calculated by Nonlinear Least-Squares Method. A kinetic equa-tion was proposed. The mechanism of anionic chain transfer reaction was discussed.     

Condensation reaction of formaldehyde and methyl formate catalyzed by a composite catalyst system

The condensation reaction of formaldehyde and methyl formate to form methyl glycolate and methyl methoxy acetate catalyzed by p-toluenesulfonic acid and different Lewis acid compounds has been investigated. The composite catalytic system consisting of p-toluenesulfonic acid and NiX2 （X = Cl, Br, I）, especially NiI2, exhibited a high catalytic performance for the condensation reaction, the total yield of MG and MMAc was up to 72.37%.     

Catalytic hydrotreatment of humins into cyclic hydrocarbons over solid acid supported metal catalysts in cyclohexane

Humins are common undesirable sideproducts during many acid-catalyzed reactions in renewable biomass platform conversion. However, few studies have been reported to the efficient utilization of humins.For the first time, the selective catalytic conversion of biomass-derived humins into cyclic hydrocarbons with high conversion rate and selectivity is presented using a home-made Ru/W-P-Si-O bifunctional catalyst. The multistage polymerization structure of humins was studied through controlled experiments.Results show that the CAC bond network can be efficiently depolymerized at a mild reaction temperature of 340–380 °C, catalyzed by the cooperative catalysis of nano-Ru particles and porous strong Lewis solid acid. Particularly, 95.4% conversion of humins was achieved under the optimal condition with up to 88.3%yield of cyclic hydrocarbons. The detailed composition after liquefaction was also analyzed. This study paves the way for the efficient production of cyclic and aromatic hydrocarbons from furan-derived humin polymer through Lewis acid-catalyzed Diels–Alder reactions between furan rings.     

STUDIES ON THE PHOTOPOLYMERIZATION OF ACRYLONITRILE INITIATED BY BENZOPHENONE-ANILINE SYSTEM

The photopolymerization of acrylonitrile initiated by benzophenone-aniline system wasstudied under the irradiation at 365 nm. From the kinetic data measured in dimethylforma-mide the kinetic equation was presented as R_p∞[benzophenone]~(0.32) [aniline]~(0.27) [acryloni-trile]~(1.1). The rate of polymerization for different amines was in the following sequence, i.e.N, N-dimethylaniline>N-methylaniline>aniline. The influence of the polarity of solventwas investigated, from which we proposed that the proton transfer took place in the intimateradical-ion pair state of the exciplex between benzophenone and aniline. Among the twokinds of radicals produced the anilino radical is responsible for the initiation.