Immobilization of fumarase and malate dehydrogenase on agarose efficiency of activity as a function of the enzyme ratio

Two enzymes, L-malate dehydrogenase, L-malate: NAD⁺ oxidoreductase (EC 1.1.1.37) and fumarase, L-malate hydrolyase (EC 4.2.1.2) were immobilized on a (Sepharose 4B) resin by the cyanogen bromide method. Studies showed that the matrix-immobilized fumarase retains the same characteristics as the free enzyme, while the matrix-immobilized malate dehydrogenase has reduced activity. The activity of the coupled enzymes is more enzymeconcentration dependent than the free enzymes, and at a ratio of 0.3 (fumarase: malate dehydrogenase) the simultaneously coupled immobilized enzymes become a better catalytic system. Individually immobilized enzymes, mixed to form a coupled system, yielded the poorest catalytic action.     

Properties of human parotid amylase immobilized by covalent binding to glass or sepharose or by reaction with immobilized antibody

Human parotid amylase was immobilized by covalent binding to CNBr-activated Sepharose, to Corning GAO-3940 silica glass biomaterial support by the diazonium reaction or reaction with glutaraldehyde, or as a result of the antigen-antibody reaction between rabbit antihuman parotid amylase IgG that was covalently bonded to GAO glass and soluble amylase. The amylase directly bonded to the supports showed constant activity at flow rates of 3-15 ml/min through a 1.76-cm³ (8-mm diameter) support bed, did not lose enzyme into a circulating starch solution, retained its activity in the presence of soluble antiamylase IgG, was optimally active at 35°-40°C, and lost activity at 40°-45°C. When the enzyme was bound by interaction with immobilized antibody, full activity was expressed, but some enzyme was solubilized by a circulating starch solution. Immobilization of either amylase or antiamylase IgG makes dissolution of the antigen-antibody bond difficult.     

Recycling of NADP+ using immobilizedE. coli and glucose-6-phosphate dehydrogenase

Recycling of NADP⁺ using immobilized wholeEscherichia coli cells as source of respiratory chain, glucose-6-phosphate, and soluble yeast glucose-6-phosphate dehydrogenase (1.1.1.49) is described. NADP⁺ was recycled more than 10-fold. We demonstrated NADPH respiration at pH 5.8 inE. coli membrane vesicles. The respiratory chain was involved most probably in NADPH oxidation.

1. The respiratory activity is localized at the level of the inner bacterial membrane. The active site for NADPH facing the cytoplasm.
2. NADPH respiration is inhibited by 10 mM cyanide, similar to the conditions of inhibition of NADH respiration.
3. NADPH dehydrogenase activity seems to be the limiting step of the respiratory chain:K _M for NADPH respiration and NADPH dehydrogenase activity are similar. The pH optima for these two activities are also comparable (around pH 5.8). Furthermore, the following properties are rather in favor of a common NADH dehydrogenase and NADPH dehydrogenase activity (1.6.99.2).

o| li](1)|At saturating concentrations of NADH and NADPH, neither respiration nor dehydrogenase activities were additive. li](2)|Similar heat inactivation kinetics were observed for NADH and NADPH dehydrogenase-activity. Protection against heat inactivation was obtained for the two activities with NAD⁺, NADP⁺, NADH, and NADPH. All these results suggested the possibility of recycling of NADP⁺ under similar conditions to those previously described for NAD⁺ (Burstein et al., 1981). It becomes thus possible to use various NAD⁺ and NADP⁺-dependent dehydrogenases in enzyme technology.     

Nanostructured platform for the detection of Neisseria gonorrhoeae using electrochemical impedance spectroscopy and differential pulse voltammetry

We report on a nanocomposite based genosensor for the detection of Neisseria gonorrhoeae, a bacterium causing the sexually transmitted disease gonorrhoea. Amino-labeled probe DNA was covalently immobilized on electrochemically prepared polyaniline and iron oxide (PANI-Fe₃O₄) nanocomposite film on an indium tin oxide (ITO) electrode. Scanning electron microscopy, transmission electron microscopy, electrochemical impedance spectroscopy (EIS) and differential pulse voltammetry (DPV) techniques have been employed to characterize surface of the modified electrode. The genosensor has detection limits of 1?×?10^-15 M and 1?×?10^-17 M, respectively, using the EIS and DPV techniques. This biosensor can discriminate a complementary sequence from a single-base mismatch and from non-complementary DNA, and has been utilized for detection of DNA extracted from N. gonorrhoeae culture, and from patient samples with N. gonorrhoeae. It is found to exhibit good specificity for N. gonorrhoeae species and shows no response towards non-gonorrhoeae type of Neisseria species (NgNs) and other gram-negative bacterias (GNBs). The affinity constant for hybridization calculated using the Langmuir adsorption isotherm model is found to be 3.39?×?10⁸ M^-1.

Immobilized citrate synthase

Kinetic properties of pig heart citrate synthase immobilized on Sepharose were determined. Compared to the free enzyme the K_m values for both acetyl-CoA and oxalacetate were increased. The kinetic pattern of the Lineweaver-Burk plots of both substrates for the immobilized enzyme was that of lines intersecting on thex axis. This is the same as that obtained for the free enzyme and indicates that there is no change in the kinetic mechanism of the reaction. The pH response and the Arrhenius plot of both the immobilized and free enzyme were the same. The enzymes show a break in their Arrhenius plots. The immobilized enzyme exhibits greater heat stability than does the free enzyme.     

Multiplex isothermal solid-phase recombinase polymerase amplification for the specific and fast DNA-based detection of three bacterial pathogens

We report on the development of an on-chip RPA (recombinase polymerase amplification) with simultaneous multiplex isothermal amplification and detection on a solid surface. The isothermal RPA was applied to amplify specific target sequences from the pathogens Neisseria gonorrhoeae, Salmonella enterica and methicillin-resistant Staphylococcus aureus (MRSA) using genomic DNA. Additionally, a positive plasmid control was established as an internal control. The four targets were amplified simultaneously in a quadruplex reaction. The amplicon is labeled during on-chip RPA by reverse oligonucleotide primers coupled to a fluorophore. Both amplification and spatially resolved signal generation take place on immobilized forward primers bount to expoxy-silanized glass surfaces in a pump-driven hybridization chamber. The combination of microarray technology and sensitive isothermal nucleic acid amplification at 38 °C allows for a multiparameter analysis on a rather small area. The on-chip RPA was characterized in terms of reaction time, sensitivity and inhibitory conditions. A successful enzymatic reaction is completed in <20 min and results in detection limits of 10 colony-forming units for methicillin-resistant Staphylococcus aureus and Salmonella enterica and 100 colony-forming units for Neisseria gonorrhoeae. The results show this method to be useful with respect to point-of-care testing and to enable simplified and miniaturized nucleic acid-based diagnostics. Figure

The combination of multiplex isothermal nucleic acid amplification with RPA and spatially-resolved signal generation on specific immobilized oligonucleotides     

Affinity chromatography ofd-lactate dehydrogenases fromLimulus polyphemus (horseshoe crab) andHaliotus sp. (abalone) voluntary muscle on 8-(6-aminohexyl)-amino-adenine nucleotide-sepharose

An improved method of purification employing sequential isoenzyme elution on DEAE-cellulose at pH 6.5 and biologically specific elution with the reduced NAD-pyruvate adduct from 8-(6-aminohexyl)-amino-NAD⊕-Sepharose is described forLimulus (horseshoe crab) muscle D- lactate dehydrogenase. The protein is judged as being at least 98%pure by its constant specific activity in the terminal purification steps, a molar extinction coefficient (280nm) identical with that previously reported for the purified enzyme, and its protein and enzyme electrophoretic patterns on starch and polyacrylamide gel electrophoresis at three pHs. The binding of ammonium sulfate fractionated D- lactate dehydrogenase from crude cell- free Limulus andHaliotus (abalone) muscle homogenates to 8-(6-aminohexyl)-amino-AMP-and 8-(6-aminohexyl)-amino-NAD®-Sepharose columns is demonstrated. A comparison of the binding properties of these two enzymes with those of vertebrate L-lactate dehydrogenases suggests that they may be significantly different in terms of their binding sites for the adenine portion of the coenzyme.     

Stability of immobilized frog epidermis tyrosinase

Purified frog epidermis tyrosinase was immobilized on the following supports: CNBr-Sepharose 4B, Enzacryl AA, Enzacryl AH, Enzacryl Polythiolactone, and Enzacryl Polyacetal. The enzyme was active on all supports except when Enzacryl Polyacetal was used. The stability increased on immobilization. Enzacryl AA was the best support assayed. The Enzacryl AA-enzyme complex was 30- to 40-fold more stable to inactivation reaction than soluble enzyme, and maintained its activity when stored and assayed repeatedly. The immobilized enzyme on the other supports was also more stable than the soluble form. The pH-activity profile, thermal stability, storage stability, and the effect of protein concentration on activity of the immobilized enzyme have been studied. The properties observed for the immobilized enzyme were different than those of the soluble enzyme. The main reason for this difference could be due to enzyme modification through tyrosine groups of the enzyme; to conformational changes produced in the union to the matrix; and to microenvironmental differences created by the matrix.     

Kinetics of immobilized pig heart fumarase

The kinetics of immobilized pig heart fumarase are described and compared with the properties of the enzyme free in solution.

1. An analogous pH dependence of initial activity is found for free and immobilized enzyme.
2. Immobilized and free fumarase deviate from classical Michaelis-Menten kinetics in the same way. The apparent K_m values are three to eight times higher for the immobilized (2 mg/g gel) enzyme.
3. The specific activity of immobilized fumarase is dependent on the final enzyme concentration on the gel; normal specific activities are observed when 50 ?g fumarase is immobilized per gram of gel, whereas the specific activity decreases with increasing enzyme concentration.
4. The activation energies for free and immobilized fumarase (50 ?g/g gel) were found to be identical between 22 and 32?C and with L-malate as substrate (E_a = 12,290 cal/mol at pH 7.9). Upon increasing the concentration of fumarase on the gel, the activation energy decreases.

Our results indicate that the true catalytic properties of fumarase are not affected by immobilization of this enzyme. The slight differences observed when fumarase is immobilized at concentrations higher than 50 ?g/g gel must be attributed to diffusional limitation at the surface of the Sepharose matrix.     

Synthesis of the bifuncttonal dinucleotide AMP-ATP and its application in general ligand affinity chromatography

A new AMP derivative substituted with spacer arms both at position N⁶ and C8 of the adenine moiety was synthesized and immobilized to Sepharose. To the immobilized ligand was subsequently coupled C8-substituted ATP in a solid-phase synthesis fashion yielding the bifunctional general ligand AMP-ATP. This affinity material was used in the separation of two major groups of enzymes, dehydrogenases and kinases. It was found that on passage of crude homogenates obtained from mouse kidney through the affinity column, several dehydrogenases and kinases were bound, which could be eluted separately using pulses of NADH and ATP, respectively. In the fractions obtained on NADH elution, lactate dehydrogenase, malate dehydrogenase, and α-glycerol phosphate dehydrogenase were found, whereas ATP eluted 3-phosphoglyceric acid kinase, pyruvate kinase, and aldolase.     

Neutral Serine Protease from Penicillium italicum. Purification,Biochemical Characterization,and Use for Antioxidative Peptide Preparation from Scorpaena notata Muscle

In the present study, purification and properties of an extracellular neutral serine protease from the fungus Penicillium italicum and its potential application as an antioxidant peptides producer are reported. The protease was purified to homogeneity using ammonium sulfate precipitation, Sephacryl S-200 gel filtration, diethylaminoethanol (DEAE)-Sepharose ion exchange chromatography, and TSK-HPLC gel filtration with a 10.2-fold increase in specific activity and 25.8 % recovery. The purified enzyme appeared as single protein band with a molecular mass of 24 kDa in sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE). The optimum pH and temperature for the proteolytic activity were pH 7.0 and 50 °C, respectively. The enzyme was stable in the pH range of 6.0–9.0. The protease was activated by divalent cations such as Ca²⁺ and Mg²⁺. Complete inhibition of the purified enzyme by phenylmethylsulfonyl fluoride confirmed that the protease was of serine-type. The purified enzyme revealed high stability and relatively broad specificity. Scorpaena notata muscle protein hydrolysates prepared using purified serine protease (protease from P. italicum (Prot-Pen)) showed good in vitro antioxidative activities. The antioxidant activities of Scorpaena muscle protein hydrolyzed by Prot-Pen (SMPH-PP) were evaluated using various antioxidant assays: 1, 1-diphenyl-2-picrylhydrazyl (DPPH) radical scavenging activity, reducing power, ferrous chelating activity, and DNA nicking assay. SMPH-PP showed varying degrees of antioxidant activity and almost the same strongest protection against hydroxyl radical induced DNA breakage.     

Fabrication and sensing property for conducting polymer nanowire-based biosensor for detection of immunoglobulin G

Conducting polymers are excellent sensing materials in the design of bioanalytical sensors because of their electronic conductivity, low energy optical transitions, biocompatibility, and room temperature operation. Among them, Polypyrrole (Ppy) is one of the most extensively used conducting polymers because of a number of properties such as redox activity, rapid electron transfer, and ability to link a variety of biomolecules to pyrrole groups by chemical treatment. In this study, Ppy nanowires were synthesized by an electrospinning method. The nanowires were prepared from a solution mixture of Ppy and poly(ethylene oxide). The method of detection in such a device is based on the selective binding of antigen onto an antibody that is covalently attached to the nanowires. Thus, anti-IgG was immobilized on Ppy nanowires using an EDC {[N-(3-dimethyl aminopropyl)-N₂-ethylcarbodiimide hydrochloride]}-NHS(N-hydrosuccinimide) modified technique. Fluorescence images of BSA–FITC (fluorescein isothiocyanate labeling of bovine serum albumin) conjugation demonstrated that antibody was functionalized on the Ppy nanowires without non-specific binding and facilitated selective detection of antigen. Current–voltage (I–V) characterization was used to monitor the change in the conductivity of nanowires while the specific binding interaction occurred. These results of electrical properties enable Ppy nanowire-based biosensors to detect biomolecules in real-time.     

Adsorption of polyprotic acid at the water/air interface

A rigorous thermodynamic treatment appropriate for surface adsorption from mixed aqueous solution of alkali and polyprotic acid was derived. Those equations were applied to mixed aqueous solution/air systems of alkali metal hydroxide and Fe^III complex with ethylenediamine- N, N, N′,N′-tetraacetate (Fe-EDTA). Surface density of each species arising from Fe-EDTA was separately evaluated, and thus, surface activity of Fe-EDTA was studied, especially its dependence on pH and how it is influenced by the counter cations. Fe-EDTA was positively adsorbed at the water/air interface at very low pHs and negatively at high pHs. The pH range of positive adsorption of Fe-EDTA with potassium ion, as a counter ion, was wider than that with sodium ion. Thus, potassium ion, a structure breaker, tended to smooth surface adsorption of Fe-EDTA at the water/air interface, whereas sodium ion, a structure maker, tended to withdraw Fe-EDTA from the interfacial region.     

Cell-free protein synthesis by posterior silk gland polyribosome

Polyribosome was prepared from the posterior gland of silkworms, where silkfibroin is specifically synthesized. Coupled with the corresponding enzymes, amino acids, ATP and GTP, silkfibroin was produced in a cell-free system. The production of silkfibroin was monitored by SDS polyacrylamide gel electrophoresis of the dansylated polypeptides. The polysome fraction was adsorbed on DEAE Sephadex. Using the immobilized polysomes, a genetic information-transducing bioreactor for producing a specified protein was assembled. The promising features of this bioreactor are discussed.     

Preparation of immobilized sepharose-micrococcal nuclease derivatives: activity and stability

Micrococcal nuclease has been covalently attached to CNBr-activated Sepharose 4B by coupling through three different enzyme functions: (a) amino groups; (b) carboxyl groups; and (c) tyrosyl or histidyl residues. On the basis of coupling yield and catalytic efficiency, Sepharose-(NH₂) nuclease derivatives were chosen for further activity andstability studies. The activity of the insoluble enzyme has been evaluated with macromolecular (DNA) and small (synthetic nucleotide) substrates; with the latter the enzyme retains 70% of native enzyme activity. Good enhancement of enzyme stability in the 4–40°C range has been observed.     

Direct electrochemistry of glucose oxidase and a biosensor for glucose based on a glass carbon electrode modified with MoS2 nanosheets decorated with gold nanoparticles

An electrochemical glucose biosensor was developed by immobilizing glucose oxidase (GOx) on a glass carbon electrode that was modified with molybdenum disulfide (MoS₂) nanosheets that were decorated with gold nanoparticles (AuNPs). The electrochemical performance of the modified electrode was investigated by cyclic voltammetry, and it is found that use of the AuNPs-decorated MoS₂ nanocomposite accelerates the electron transfer from electrode to the immobilized enzyme. This enables the direct electrochemistry of GOx without any electron mediator. The synergistic effect the MoS₂ nanosheets and the AuNPs result in excellent electrocatalytic activity. Glucose can be detected in the concentration range from 10 to 300 μM, and down to levels as low as 2.8 μM. The biosensor also displays good reproducibility and long-term stability, suggesting that it represents a promising tool for biological assays. Figure

A MoS₂-based glucose sensor has been prepared by gold nanoparticles-decorated MoS₂ nanocomposite, which exhibited excellent electrocatalytic activity, reproducibility and long-term stability. It was applied to determine glucose concentration in human serum, suggest the sensor maybe promising for practical application.     

Kinetic behavior of immobilized aldolase in a continuously stirred tank reactor

Aldolase was bound covalently to CNBr-activated Sepharose. The immobilized enzyme was investigated in a continuously stirred tank reactor (CSTR). In spite of the complexity of the system, the stationary performance of the CSTR can be described by a very simple equation. There are essentially two control parameters,V _m andK _eq— that govern the stationary performance of the aldolase reactor.     

Purine nucleoside phosphorylase: Immobilization by covalent chromatography and a study on its sulfhydryl groups

Covalent chromatography is used for studying the role of sulfhydryl groups in pig brain purine nucleoside phosphorylase (PNP). This enzyme has been immobilized on an insoluble polymeric reagent (thiol-Sephnrose 4B) by a thiol-disulfide interchange reaction between the disulfide groups of the gel and some of its thiol groups. The immobilized enzyme retained its activity and the coupling was reversible under reducing conditions, allowing the recovery of the enzymic activity. These results suggest that PNP contains nonessential sulfhydryl groups that can react with the thiol-Sepharose. On the other hand, inactivation with some thiol reagents shows that thiol groups directly involved in the catalytic activity are present at or near the active site. The technique described should be generally useful in the immobilization of thiol-containing proteins and in the characterization of these thiol groups.     

Preparation,characterization, and luminescence of (SBA-15) immobilized pepsin

SBA-15 mesoporous silica was synthesized by hydrothermal method and its surface was methylated by treatment with methyltrimethoxysilane. Pepsin was immobilized on the obtained materials giving host-guest composite materials (SBA-15)-pepsin and (methylated SBA-15)-pepsin. The optimum conditions for preparation of these materials were established. Methylated SBA-15 (M-SBA-15) has improved immobilization efficiency of enzyme compared to initial SBA-15 silica. It was shown that with the gradual increase of NaCl solution ionic strength the immobilized amount of enzyme was reduced. Powder X-ray diffraction and Fourier transform infrared spectroscopy showed that the host frameworks in the prepared host-guest composite materials are intact and the ordered structure was retained. Scanning electron microscopic studies revealed fibrous morphologic characteristics of the SBA-15 and the immobilized pepsin composite materials. The average particle diameter of (SBA-15)-pepsin composite was 338 ± 10 and 343 ± 10 nm for (M-SBA-15)-pepsin. The low temperature N₂ adsorption-desorption study at 77 K showed that the pore sizes and specific surface areas of the host-guest composite materials were smaller than those before the introduction of the enzyme, suggesting that the immobilized enzyme occupied a definite position in the host material pore channels. The UV-vis solid diffuse reflectance and luminescence studies showed that the enzyme was successfully immobilized on to the host material and that after the immobilization of enzyme on SBA-15 the conformation of pepsin macromolecule has not been changed.     

Preparation and properties of insoluble forms of bacteriophage T4 lysozyme and chicken egg white lysozyme

Bacteriophage T4 lysozyme and chicken egg white lysozyme were covalently bound to cyanogen bromide activated Sepharose and to glutaraldehyde activated polyacrylhydrazido-Sepharose. The latter method seemed less favorable for T4 lysozyme, since the poly-acrylhydrazido-agarose conjugate exhibited low activity compared to the agarose conjugate. Whole bacteria (M.luteus and chloroform-treatedE. coli B cells) and the soluble uncross-linked peptidoglycan polymer fromM. luteus were used as substrates. Both types of conjugates exhibited low specific activity (lytic activity) toward insoluble substrates (cells), but surprisingly high specific activity toward the soluble substrate (hydrolytic activity). Product analysis showed that the enzyme conjugates retained their specificity of action, i.e., the same products were formed, and their rates of production were the same as those observed with the soluble (native) enzyme. The cell wall disaccharide-tetrapeptide GlcNAc-MurNAc-L-ala-D-gIu-(A₂pm-D-Ala) (C₆) inhibits the hydrolytic activity of both the native and the agarose bound T4 lysozyme. Only a slightly increased thermal stability was observed upon immobilization of T4 lysozyme, whereas the stability of the enzyme during storage and handling was greatly improved. The pH optimum of the lytic activity of Sepharose-T4 lysozyme was shifted about 1 pH unit to the alkaline side, compared to that found for the soluble enzyme, whereas no pH shift was observed for the polyacrylhydrazido-Sepharose conjugate. The optimum of the hydrolytic activity of Sepharose-T4 lysozyme was shifted to the acidic side. The pH optima of the lytic activity of the various lysozymes toward the bacterial cells were all very similar (>7), and differed greatly from the pH optima (<6) observed for their hydrolytic activities toward the negatively charged soluble peptidoglycan polymer. It is proposed that the observed differences in pH optima primarily reflect the basically different properties measured, i.e., the β(1–4) cleaving activity (hydrolytic activity), and dissolution process of the damaged cells (lytic activity).