Investigation on the hydrodynamics of slab x-ray laser plasma by nonuiform line focused laser irradiation

Based on the two-dimensional model,this paper compares the hydrodynamics of slab x-ray laser plasma produced by different nonuniform line focused irradiations.It finds that the average intensity and the duration of laser pulse and the overall shape of the intensity distribution in the focal line have different influences on the plasma.Calculations show that the evolution of temperature variation is more sensitive to the pulse duration and the electron density variation is more sensitive to the pulse intensity.Pulses with duration of 200 ps to 500 ps and with intensity of 0.2 TW/cm 2 to 1.0 TW/cm 2 are proved acceptable in slab x-ray lasers.     

2D parameter optimization of Ne-like Cr x-ray laser on slab

A method of studying a non-equilibrium x-ray laser plasma is developed by extending the existing one-dimensional similarity equations to the case of two-dimensional plasma study in the directions perpendicular to the slab and along a focal line. With this method the characteristics of pre-plasma are optimized for transient neon-like Cr x-ray laser. It is found that when the duration and the intensity of 1.053μm pre-pulse are 1.2ns and 6.5 TW/cm² respectively with a delay time of 1.5ns, the temperature and the temperature discrepancy each approach a proper state, which will provide a uniform distribution of properly ionized neon-like Cr ions before the arrival of pumping pulse.     

Influence of air pressure on mechanical effect of laser plasma shock wave

The influence of air pressure on mechanical effect of laser plasma shock wave in a vacuum chamber produced by a Nd:YAG laser has been studied. The laser pulses with pulse width of 10ns and pulse energy of about 320mJ at 1.06$\mu $m wavelength is focused on the aluminium target mounted on a ballistic pendulum, and the air pressure in the chamber changes from $2.8\times 10^{3}$ to 1.01$\times $10$^{5 }$Pa. The experimental results show that the impulse coupling coefficient changes as the air pressure and the distance of the target from focus change. The mechanical effects of the plasma shock wave on the target are analysed at different distances from focus and the air pressure.     

Ion Acceleration in Laser-Plasma Interaction： Shock, Sheath, and Scaling

Some notes and comments on ion acceleration in laser-plasma interaction is given, in particular for the implication of shock, sheath and sealing. A simple model is proposed for ion acceleration by the combination of shock and sheath. The obtained scaling relations between the maximum ion energy and laser parameters （power, pulse duration） as well plasma parameter （plasma density）for example α PL 7/12 Eion,max α TL1/3 and Eion,max α ne2/3,are compared to the previous works. Some deficiencies and implications of model and results are discussed.     

Effects of Laser Intensities and Target Shapes on Attosecond Pulse Generation from Irradiated Solid Surfaces

Single attosecond pulses can be generated when an intense laser pulse focused in a volume of a few cubic wave- lengths （λ^3） is reflected from a solid plasma surface. With relativistic two-dimensional particle-in-cell simulations, we investigate the effects of the incident laser intensity and the target surface profiles on attosecond pulse generation. Usually the width of the reflected attosecond pulse decreases and its electromagnetic energy density increases with increasing laser intensity, while the energy conversion efficiency to the attoseond pulse decreases, By changing the target surface profile, such as using a convex surface or adding proper preplasma, one can further shorten the attosecond pulse duration and meanwhile increase its energy density.     

Laser-produced plasma helium-like titanium Kα x-ray source and its application to Rayleigh-Taylor instability study

Several experiments are performed on the ShenGuang-II laser facility to investigate an x-ray source and test radiography concepts.X-ray lines emitted from laser-produced plasmas are the most practical means of generating these high intensity sources.By using a time-integrated space-resolved keV spectroscope and pinhole camera,potential helium-like titanium Kα x-ray backlighting (radiography) line source is studied as a function of laser wavelength,ratio of pre-pulse intensity to main pulse intensity,and laser intensity (from 7.25 to～11.3×10 15 W/cm 2).One-dimensional radiography using a grid consisting of 5 μm Au wires on 16 μm period and the pinhole-assisted point projection is tested.The measurements show that the size of the helium-like titanium Kα source from a simple foil target is larger than 100 μm,and relative x-ray line emission conversion efficiency ξ x from the incident laser light energy to heliumlike titanium K-shell spectrum increases significantly with pre-pulse intensity increasing,increases rapidly with laser wavelength decreasing,and increases moderately with main laser intensity increasing.It is also found that a gold gird foils can reach an imaging resolution better than 5-μm featured with high contrast.It is further demonstrated that the pinhole-assisted point projection at such a level will be a novel two-dimensional imaging diagnostic technique for inertial confinement fusion experiments.     

Studies on the mechanisms of powerful terahertz radiations from laser plasmas

A survey on the mechanisms of powerful terahertz (THz) radiation from laser plasmas is presented.Firstly,an analytical model is described,showing that a transverse net current formed in a plasma can be converted into THz radiations at the plasma oscillation frequency.This theory is applied to explain THz generation in a gas driven by two-color laser pulses.It is also applied to THz generation in a tenuous plasma driven by a chirped laser pulse,a few-cycle laser pulse,a DC/AC bias electric field.These are well verified by particle-in-cell simulations,demonstrating that THz radiations produced in these approaches are nearly single-cycles and linear polarized.In the chirped laser scheme and the few-cycle laser scheme,THz radiations with the peak field strength of tens of MV/cm and the peak power of gigawatt can be achieved with the incident laser intensity less than 10 17 W/cm 2.     

A New Dynamics Expansion Mechanism for Plasma during Pulsed Laser Deposition

The dynamics expansion mechanisms for plasma plume generated by pulsed laser radiation are studied in detail, taking account of plasma ionization effect. Based on the consideration of local conservations of mass, momentum, collected as the assumption that plasma can be viewed as compressible ideal fluid and high temperature-high pressure ideal gas, we develop a new dynamics expansion mechanism for plasma produced by pulsed laser radiation. Using the analytical method, the space number density and pressure evolvement of plasma in cylindrical coordinate are obtained, the dynamics evolvement equations are also derived. The results from the present model indicate that the plasma dynamic expansion behaviour can be evidently influenced by the ionization fraction η. Its effect is similar to a new dynamic source for plasma expansion and increases the expansion acceleration in all directions. The predictions of the expansion of the plasma is affected by the temperature, the average atoms mass and the ionization degree of the plasma are consistent with the experimental results.     

Characterization of tightly focused partially coherent radially polarized vortex beams

<正>Tight focusing properties of partially coherent radially polarized vortex beams are studied based on vectorial Debye theory.We focus on the focal properties including the intensity and the partially coherent and polarized properties of such partially coherent vortex beams through a high numerical aperture objective. It is found that the source coherence length and the maximal numerical aperture angle have direct influence on the focal intensity,as well as coherence and polarization properties.This research is important in optical micromanipulation and beam shaping.     

Statistical properties of the photoelectron energy spectrum generated by an intense laser pulse and a continuous X-ray

This study shows that the photoelectron energy spectrum generated by an intense laser pulse in the presence of a continuous X-ray has interesting and useful statistical properties. The total photoionization production is linearly propor- tional to the time duration of the laser pulse and the square of the beam size. The spectral double energy-integration is an intrinsic value of the laser-assisted X-ray photoionization, which linearly depends on the laser intensity and which quantita- tively reflects the strengths of the laser-field modulation and the quantum interference between photoelectrons. The spectral energy width also linearly depends on the laser intensity. These linear relationships suggest new methods for the in-situ measurement of laser intensity and pulse duration with high precision.     

Measurement of micro weld joint position based on magneto-optical imaging

In a laser butt joint welding process,it is required that the laser beam focus should be controlled to follow the weld joint path accurately.Small focus wandering off the weld joint may result in insufficient penetration or unacceptable welds.Recognition of joint position offset,which describes the deviation between the laser beam focus and the weld joint,is important for adjusting the laser beam focus and obtaining high quality welds.A new method based on the magneto-optical(MO)imaging is applied to measure the micro weld joint whose gap is less than 0.2 mm.The weldments are excited by an external magnetic field,and an MO sensor based on principle of Faraday magneto effect is used to capture the weld joint images.A sequence of MO images which are tested under different magnetic field intensities and different weld joint widths are acquired.By analyzing the MO image characteristics and extracting the weld joint features,the influence of magnetic field intensity and weld joint width on the MO images and detection of weld joint position is observed and summarized.     

Multi-Phase Flow and Heat Transfer of a Micro-Pump Thermally Driven by a Multi-Output Pulse Laser

We present an experimental study of multi-phase flow and heat transfer in a micro-tube induced by a multi-output pulse laser. Extensive flow and heat transfer measurements and visualization experiments have been carried out to characterize the micro-pump behaviour under various conditions. The experiments reveal extremely unsteady and complex flow patterns in the micro tube with the flow closely related with generation and collapse of bubbles.It is found that the flow rates are controlled by the heating and condensation conditions within the tube. The laser pulse duration, pulse interval and output-power as well as the tube diameter all show a strong influence on the flow rate of the micro-pump. This study provides a basis for the design of thermally-driven micro-pump induced by a pulsed laser beam.     

Interaction of intense laser pulses with hydrogen atomic clusters

The interaction between intense femtosecond laser pulses and hydrogen atomic clusters is studied by a simplified Coulomb explosion model. The dependences of average proton kinetic energy on cluster size, pulse duration, laser intensity and wavelength are studied respectively. The calculated results indicate that the irradiation of a femtosecond laser of longer wavelength on hydrogen atomic clusters may be a simple, economical way to produce highly kinetic hydrogen ions. The phenomenon suggests that the irradiation of femtosecond laser of longer wavelength on deuterium atomic clusters may be easier than that of shorter wavelength to drive nuclear fusion reactions. The product of the laser intensity and the squared laser wavelength needed to make proton energy saturated as a function of the squared cluster radius is also investigated. The proton energy distribution calculated is also shown and compared with the experimental data. Our results are in agreement with the experimental results fairly well.     

Aspects of the upstream region in a plasma jet with dielectric barrier discharge configurations

A plasma column with a length of about 65 cm is generated in the upstream region of a plasma jet using dielectric barrier discharge configurations. The effects of experimental parameters such as the amplitude of the applied voltage and the driving frequency are investigated in aspects of the plasma column by the optical method. Results show that both the plasma length and the propagating velocity, as well as the discharge current, increase with the increase in the applied voltage or its frequency. The discharge mechanism is analysed qualitatively based on streamer theory, where photo-ionization is important. Furthermore, optical emission spectroscopy is used to investigate the electric field intensity of the upstream region.     

Aspects of the dielectric upstream region barrier discharge in a plasma jet with configurations

A plasma column with a length of about 65 cm is generated in the upstream region of a plasma jet using dielectric barrier discharge configurations. The effects of experimental parameters such as the amplitude of the applied voltage and the driving frequency are investigated in aspects of the plasma column by the optical method. Results show that both the plasma length and the propagating velocity, as well as the discharge current, increase with the increase in the applied voltage or its frequency. The discharge mechanism is analysed qualitatively based on streamer theory, where photo-ionization is important. Furthermore, optical emission spectroscopy is used to investigate the electric field intensity of the upstream region.     

Study of laser-induced plasma shock waves by the probe beam deflection technique

Laser probe beam deflection technique is used for the analysis of laser-induced plasma shock waves in air and distilled water. The temporal and spatial variations of the parameters on shock fronts are studied as functions of focal lens position and laser energy. The influences of the characteristics of media are investigated on the well-designed experimental setup. It is found that the shock wave in distilled water attenuates to an acoustic wave faster than in air under the same laser energy. Good agreement is obtained between our experimental results and those attained with other techniques. This technique is versatile, economic, and simple to implement, being a promising diagnostic tool for pulsed laser processing.     

Scattering of light waves by electron electrostatic waves in laser produced plasmas

The propagation of light waves in an underdense plasma is studied using one-dimensional Vlasov-Maxwell numerical simulation.It is found that the light waves can be scattered by electron plasma waves as well as other heavily and weakly damping electron wave modes,corresponding to stimulated Raman and Brilluoin-like scatterings.The stimulated electron acoustic wave scattering is also observed as a high scattering level.High frequency plasma wave scattering is also observed.These electron electrostatic wave modes are due to a non-thermal electron distribution produced by the wave-particle interactions.The collision effects on stimulated electron acoustic wave and the laser intensity effects on the scattering spectra are also investigated.     

Spectroscopic Diagnostics of Atmospheric Argon Microwave Plasma Based on an Inductive Coupling Window-Rectangular Resonator

We present a novel microwave plasma source based on an inductive coupling window-rectangular resonator. A definite volume of atmospheric argon microwave plasma is excited in the source under the input of several kilowatts of microwave power operating at 2.45 0Hz. The excitation temperature and electron temperature of the argon plasma are separately researched by using Boltzmann plot and line-to continuum intensity ratio of Ar I spectral lines. Its electron density is inferred from the Stark broadening of the Hβ line at 486.13nm.     

Self-Organized Micro-Columns and Nano-Spheres Generated by Pulsed Laser Ablation of Ti/A1 Alloy in Water

Dense arrays of micro-columns are formed on the surface of Ti-AI alloy by cumulative nanosecond pulsed laser ablation in water. The fabric-like structure characterized by Ti-A1 nano-spheres absorbed on micro-duster in liquid is most likely responsible for the occurrence of laser micro-etching and localized melting, resulting in continuous deepening of micro-holes and the formation of micro-columns. Laser induced plasma spectroscopy is carried out to reveal the effect of micro-columns on subsequent pulse laser ablation. The intensity of spectral lines from Ti ions by additional laser ablation of the modified spot is higher than that created over a smooth surface. These results suggest that the micro-columns lead to an enhanced absorption of the following laser energy. The proposed results and relevant discussions are of importance for the development of light-trapping coatings on a metal surface.     

Particle simulation on electron acceleration process by the laser ponderomotive force in inhomogeneous underdense plasma layers

The mechanism of electron ponderomotive acceleration due to increasing group velocity of laser pulse in inhomogeneous underdense plasma layers is studied by two-dimensional relativistic parallel particle-in-cell code. The electrons within the laser pulse move with it and can be strongly accelerated ponderomotively when the duration of laser pulse is much shorter than the duration of optimum condition for acceleration in the wake. The extra energy gain can be attributed to the change of laser group velocity. More high energy electrons are generated in the plasma layer with descending density profile than that with ascending density profile. The process and character of electron acceleration in three kinds of underdense plasma layers are presented and compared.