Syntheses and structures of new diaryl lead(II) compounds PbR2 (1, R = 2,4,6-triphenylphenyl; 2, R = 2,6-bis(1-naphthyl)phenyl)

Reaction of RLi with lead(II) bromide affords the diaryl lead(II) compounds PbR2 (R1 = 2,4,6-triphenylphenyl, 1; R2 = 2,6-bis(1'-naphthyl)phenyl, 2), which have monomeric, carbene-like structures with bent two-coordinate Pb(II) centers.     

Matrix IR spectra of new organic silanones, (MeO)2Si=O and Ph2Si=O

Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 9, pp. 2187–2188, September, 1988.     

Sterically Tuned P‐Phosphanylamino Phosphaalkenes (Me3Si)2C=PN(R)PPh2 and (iPrMe2Si)2C=PN(R)PPh2

Deprotonation of the aminophosphanes Ph₂PN(H)R 1a – 1h [R = tBu ( 1a ), 1‐adamantyl ( 1b ), iPr ( 1c ), CPh₃ ( 1d ), Ph ( 1e ), 2,4,6‐Me₃C₆H₂ (Mes) ( 1f ), 2,4,6‐tBu₃C₆H₂ (Mes*) ( 1g ), 2,6‐iPr₂C₆H₃ (DIPP) ( 1h )], followed by reactions of the phosphanylamide salts Li[Ph₂PNR] 2a , 2b , 2g , and 2h with the P‐chlorophosphaalkene (Me₃Si)₂C=PCl, and of 2a – 2g with (iPrMe₂Si)₂C=PCl, gave the isolable P‐phosphanylamino phosphaalkenes (Me₃Si)₂C=PN(R)PPh₂ 3a , 3b , 3g , and (iPrMe₂Si)₂C=PN(R)PPh₂ 4a – 4g . ³¹P NMR spectra, supported by X‐ray structure determinations, reveal that in compounds 2a , 2b , 3a , and 3b , with bulky N‐alkyl groups the Si₂C=P–N–P skeleton is non‐planar (orthogonal conformation), whereas 3g , 3h , and 4g with bulky N‐aryl groups exhibit planar conformations of the Si₂C=P–N–P skeleton. Solid 3g and 4g exhibit cisoid orientation of the planar C=P–N–C units (planar I) but in solid 3h the transoid rotamer is present (planar II). From 3g , 4d , and 4g mixtures of rotamers were detected in solution by pairs of ³¹P NMR patterns ( 3h : line broadening).     

A high molar extinction coefficient mono-anthracenyl bipyridyl heteroleptic ruthenium(II) complex: synthesis, photophysical and electrochemical properties

In our quest to develop good materials as photosensitizers for photovoltaic dye-sensitized solar cells (DSSCs), cis-dithiocyanato-4-(2,3-dimethylacrylic acid)-2,2'-bipyridyl-4-(9-anthracenyl-(2,3-dimethylacrylic)-2,2'-bipyridyl ruthenium(II) complex, a high molar extinction coefficient charge transfer sensitizer, was designed, synthesized and characterized by spectroscopy and electrochemical techniques. Earlier studies on heteroleptic ruthenium(II) complex analogues containing functionalized oligo-anthracenyl phenanthroline ligands have been reported and documented. Based on a general linear correlation between increase in the length of π-conjugation bond and the molar extinction coefficients, herein, we report the photophysical and electrochemical properties of a Ru(II) bipyridyl complex analogue with a single functionalized anthracenyl unit. Interestingly, the complex shows better broad and intense metal-to ligand charge transfer (MLCT) band absorption with higher molar extinction coefficient (λ(max) = 518 nm, e = 44900 M?1 cm?1), and appreciable photoluminescence spanning the visible region than those containing higher anthracenyl units. It was shown that molar absorption coefficient of the complexes may not be solely depended on the extended π-conjugation but are reduced by molecular aggregation in the molecules.     

Two new heteroleptic ruthenium(II) dithiocarbamates: synthesis,characterization, DFT calculation and DNA binding

Two ruthenium(II) dithiocarbamates, cis-[Ru(DMP)₂L](BF₄), where L = 4-(4-methoxy-phenyl)piperazine-1-carbodithioate (1) and 4-(3-methoxyphenyl)piperazine-1-carbodithioate (2) and DMP = 2,9-dimethyl-1,10-phenanthroline, have been synthesized and characterized. The DNA-binding affinity of these metal complexes was investigated by UV–visible spectrophotometry with DNA-binding constants of 6.2 × 10⁴ M^?1 (1) and 1.2 × 10⁵ M^?1 (2) and electrostatic binding mode was confirmed by viscometric measurements. For insight into the structural differences, both complexes were studied computationally. B3LYP/LANL2DZ level of Density Functional Theory was used for the computational studies in Gaussian 09. The optimized bond lengths are in agreement with the reported values. Comparative computational studies reveal interesting transformations in bond lengths, angles, Natural Bond Orbital charges, molecular orbitals, Molecular Electro Static Potentials, and global chemical reactivity indices. Based on quantum chemical results a structure–activity relationship has been attempted.     

Mechanism of the addition of nonenolizable aldehydes and ketones to (Di)metallenes (R(2)X=YR(2), X = Si,Ge Y = C,Si, Ge): a density functional and multiconfigurational perturbation theory study

The mechanism of the addition of nonenolizable aldehydes and ketones to group 14 (di)metallenes has been examined through a theoretical study of the addition of formaldehyde to Si=C, Ge=C, Si=Si, Si=Ge, and Ge=Ge bonds at the B3LYP/6-311++G(d,p) and CAS-MCQDPT2/6-31++G(d,p) levels of theory. The reaction pathways located can be grouped as either involving the formation of singlet diradical or zwitterionic intermediates or as concerted processes. Within each group of reaction pathways, several different mechanisms have been located, with not all mechanisms being available to all of the (di)metallenes. It was found that for reactions in which a Si-O bond results (i.e., addition to Si=C, Si=Si, and Si=Ge) both diradical and zwitterionic intermediates are possible; however, the formation of diradical intermediates was not found for reactions that result in the formation of a Ge-O bond (addition to Ge=C and Ge=Ge). The underlying cause of this pathway selectivity is examined, as well as the effect of solvent on the relative energies of the pathways. The results of the study shed light on the cause of experimentally obtained results regarding the mechanism of the reaction of (di)metallenes with nonenolizable ketones and aldehydes.     

A new heteroleptic phosphorescent cuprous complex supported by a BINAP ligand: synthesis,structure, luminescence properties and theoretical analyses

Luminescent cuprous complexes are an important class of coordination compounds due to their relative abundance, low cost and ability to display excellent luminescence. The heteroleptic cuprous complex solvate rac‐(acetonitrile‐κN)(3‐aminopyridine‐κN)[2,2′‐bis(diphenylphosphanyl)‐1,1′‐binaphthyl‐κ²P,P′]copper(I) hexafluoridophosphate dichloromethane monosolvate, [Cu(C₅H₆N₂)(C₂H₃N)(C₄₄H₃₂P₂)]PF₆·CH₂Cl₂, conventionally abbreviated as [Cu(3‐PyNH₂)(CH₃CN)(BINAP)]PF₆·CH₂Cl₂, ( I ), where BINAP and 3‐PyNH₂ represent 2,2′‐bis(diphenylphosphanyl)‐1,1′‐binaphthyl and 3‐aminopyridine, respectively, is described. In this complex solvate, the asymmetric unit consists of a cocrystallized dichloromethane molecule, a hexafluoridophosphate anion and a complete racemic heteroleptic cuprous complex cation in which the cuprous centre, in a tetrahedral CuP₂N₂ coordination, is coordinated by two P atoms from the BINAP ligand, one N atom from the 3‐PyNH₂ ligand and another N atom from a coordinated acetonitrile molecule. The UV–Vis absorption and photoluminescence properties of this heteroleptic cuprous complex have been studied on polycrystalline powder samples, which had been verified by powder X‐ray diffraction before recording the spectra. Time‐dependent density functional theory (TD‐DFT) calculations and a wavefunction analysis reveal that the orange–yellow phosphorescence emission should originate from intra‐ligand (BINAP) charge transfer mixed with a little of the metal‐to‐ligand charge transfer ³(IL+ML)CT excited state.     

Five-, six- and eight-membered ring organosilicon chalcogenides of the types Z2(SiMe2)2E (Z = Me2Si, H2C; E = S, Se, Te), Z(SiMe2E)2MR2 (Z = Me2Si, H2C, O; E = S, Se, Te; M = Si, Ge, Sn, R = Me, Ph) and (SiMe2ZSiMe2E)2 (Z = Me2Si, H2C; E = S, Se)

Reactions of ClMe₂Si–Z–SiMe₂Cl (Z = SiMe₂ (1a), CH₂ (1c), O (1e)) with Li₂E (E = S, Se) yielded eight-membered ring compounds (SiMe₂ZSiMe₂E)₂ (3a–d) as well as acyclic oligomers (SiMe₂ZSiMe₂E)_x of different chain lengths. If 1:1 molar mixtures of 1a, 1c or 1e and a diorganodichlorosilane, -germane or -stannane (R₂MCl₂) are reacted with Li₂E (E = S, Se, Te), six-membered ring compounds Z(SiMe₂E)₂MR₂ (4a–7g) are formed exclusively. Five-membered rings Z₂(SiMe₂)₂E (Z = SiMe₂ (8a–c), CH₂ (9a–c); E = S, Se, Te) are obtained starting from the tetrasilane ClMe₂Si–(SiMe₂)₂–SiMe₂Cl (1b) or the disilylethane ClMe₂Si–(CH₂)₂–SiMe₂Cl (1d) by treatment with Li₂E. All products were characterized by multinuclear NMR spectroscopy (¹H, ¹³C, ²⁹Si, ¹¹⁹Sn, ⁷⁷Se, ¹²⁵Te, including coupling constants) and the effects of the different ring sizes towards NMR chemical shifts are discussed.     

A new asymmetric synthesis of (2S,3R,4R,5S)-trihydroxypipecolic acid

A novel four step synthesis of enantiomerically pure (2S,3R,4R,5S)-trihydroxypipecolic acid, starting from readily available materials, that is, condensation products of (R)-(−)-phenylglycinol with a mesotrihydroxylated glutaraldehyde, is described. The scope and limitations of the reaction have also been investigated.     

MA(delta)Sb(2-delta) (M = Zr, Hf; A = Si, Ge): a new series of ternary antimonides and not "beta-ZrSb2"

The ternary antimonides ZrSi(delta)Sb(2-delta), HfGe(delta)Sb(2-delta), and ZrGe(delta)Sb(2-delta) were prepared by annealing of the elements in stoichiometric ratios below 800 degrees C. ZrSi(delta)Sb(2-delta) was earlier erroneously described as the binary "beta-ZrSb(2)", which does not exist as such, because the incorporation of tetrel atoms is necessary for the formation of this structure. ZrSi(delta)Sb(2-delta) has a small yet significant phase width with at least 0.066(7) < or = delta < or = 0.115(3), whereas the Ge analogues exist with larger tetrel concentration, i.e., ZrGe(0.211(5))Sb(1.789) and HfGe(0.205(6))Sb(1.795). The whole series of title compounds crystallizes in the Co(2)Si type (space group Pnma), with lattice dimensions of, e.g., for ZrGe(0.211(5))Sb(1.789), a = 730.4(1) pm, b = 395.13(6) pm, c = 957.6(2) pm, V = 0.27635(7) nm(3), Z = 4. The anionic substructure comprises infinite ribbons formed by the atom sites Q1 and Sb2, with Q1 being mixed occupied by Si or Ge and Sb atoms. These ribbons exhibit Q1-Q1 single bonds and Q1-Sb2 "half" bonds. Assuming the validity of the 8 - N rule, one can assign seven valence-electrons to Sb2 but only five to Q1, which might explain the preference of the tetrel atoms for the latter site.     

Dinuclear gold(I) dithiophosphonate complexes: synthesis,luminescent properties,and X-ray crystal structures of [AuS(2)PR(OR')](2) (R = Ph,R' = C(5)H(9); R = 4-C(6)H(4)OMe,R' = (1S,5R,2S)-(--)-menthyl; R = Fc,R' = (CH(2))(2)O(CH(2))(2)OMe)

2,4-Diaryl- and 2,4-diferrocenyl-1,3-dithiadiphosphetane disulfide dimers (RP(S)S)(2) (R = Ph (1a), 4-C(6)H(4)OMe (1b), FeC(10)H(9) (Fc) (1c)) react with a variety of alcohols, silanols, and trialkylsilyl alcohols to form new dithiophosphonic acids in a facile manner. Their corresponding salts react with chlorogold(I) complexes in THF to produce dinuclear gold(I) dithiophosphonate complexes of the type [AuS(2)PR(OR')](2) in satisfactory yield. The asymmetrical nature of the ligands allows for the gold complexes to form two isomers (cis and trans) as verified by solution (1)H and (31)P[(1)H] NMR studies. The X-ray crystal structures of [AuS(2)PR(OR')](2) (R = Ph, R' = C(5)H(9) (2); R = 4-C(6)H(4)OMe, R' = (1S,5R,2S)-(-)-menthyl (3); R = Fc, R' = (CH(2))(2)O(CH(2))(2)OMe (4)) have been determined. In all cases only the trans isomer is obtained, consistent with solid state (31)P NMR data obtained for the bulk powder of 3. Crystallographic data for 2 (213 K): orthorhombic, Ibam, a = 12.434(5) A, b = 19.029(9) A, c = 11.760(4) A, V = 2782(2) A(3), Z = 4. Data for 3 (293 K): monoclinic, P2(1), a = 7.288(2) A, b = 12.676(3) A, c = 21.826(4) A, beta = 92.04(3) degrees, V = 2015.0(7) A(3), Z = 2. Data for 4 (213 K): monoclinic, P2(1)/n, a = 11.8564(7) A, b = 22.483(1) A, c = 27.840(2) A, beta = 91.121(1) degrees, V = 7419.8(8) A(3), Z = 8. Moreover, 1a-c react with [Au(2)(dppm)Cl(2)] to form new heterobridged trithiophosphonate complexes of the type [Au(2)(dppm)(S(2)P(S)R)] (R = Fc (12)). The luminescence properties of several structurally characterized complexes have been investigated. Each of the title compounds luminesces at 77 K. The results indicate that the nature of Au...Au interactions in the solid state has a profound influence on the optical properties of these complexes.     

Isolable anion radical of blue disilene (tBu2MeSi)2Si=Si(SiMetBu2)2 formed upon one-electron reduction: synthesis and characterization

The highly twisted tetrakis(di-tert-butylmethylsilyl)disilene 4 was prepared and reacted with (t)BuLi in THF, producing disilene anion radical 5 upon one-electron reduction. The anion radical 5 was isolated in the form of its lithium salt as extremely air- and moisture-sensitive red crystals. The molecular structure of 5 was established by X-ray crystallography, which showed a nearly orthogonal structure (twisting angle of 88 degrees ) along the central Si-Si bond, with a length of 2.341(5) A, which is 3.6% elongated relative to that of 4. The interesting feature of 5 is that one of the central Si atoms has radical character, whereas the other Si atom has silyl anion character. An electron spin resonance (ESR) study of the hyperfine coupling constants of the (29)Si nuclei indicates that rapid spin exchange occurs between these central Si atoms on the ESR time scale.     

Generation and characterization of Mn(CO)3L2 (L2 = R2PC2H4PR2; R = Et,Ph) and its use in the generation of organic radicals

Irradiation of Mn₂(CO)₁₀ with the bidentate phosphine 1,2-bis(diethylphosphino)ethane (depe) rapidly yields [Mn(CO)₃depe]₂ and Mn(CO)₃depe. The two species are in equilibrium in solution, with the dimer present in larger amounts: [Mn(CO)₃depe]₂

2Mn(CO)₃depe. The formation of Mn(CO)₃depe proceeds much more readily than the formation of Mn(CO)₃L₂ (L = monodentate phosphine complexes). In addition, no side-products are formed as is the case with the monodentate ligands. The ease with which Mn(CO)₃depe can be generated makes it a convenient reagent for the synthesis of organic radicals because the complex abstracts halogen atoms from alkyl and aryl halides: Mn(CO)₃depe + RX → Mn(CO)₃(depe)X + P     

Bisborohydride yttrium complexes containing amidinate ligands [o-Me2NC6H4CH2C(NR)2]Y(BH4)2L n (R = Pri,L = DME,n = 1; R = Cy,L = THF,n = 2). Synthesis,structure, and catalytic activity in polymerization of rac-lactide and isoprene

Russian Chemical Bulletin - A reaction of o-N,N-dimethyltoluidine lithium derivative (o-Me2NC6H4CH2Li) with carbodiimides (RN=C=NR, where R = Pri, Cy) in THF at room temperature leads to lithium...     

An antiaromatic porphyrin complex: tetraphenylporphyrinato(silicon)(L)2 (L=THF or pyridine)

Treatment of Si(TPP)Cl2 (TPP = tetraphenylporphyrinato) with 2 equiv of Na/Hg in THF yields the reduced porphyrin complex, Si(TPP)(THF)2, in which the porphyrin ring system has an oxidation state of 4- and the complex is antiaromatic. Single-crystal X-ray diffraction reveals that Si(TPP)(THF)2 is highly ruffled and exhibits a unique C-C bond length alternation around its periphery. In addition, experimental 1H and 29Si NMR chemical shifts and NICS (nucleus-independent chemical shift) calculations on a model compound indicate a strong paratropic ring current in Si(TPP).     

Synthesis and structural comparison of a series of divalent Ln(Tp(R,R)')2 (Ln = Sm, Eu, Yb) and trivalent Sm(Tp(Me2))2X (X = F, Cl, I, BPh4) complexes

Reaction of LnI2 (Ln = Sm, Yb) with two equivalents of NaTp(Me2) or reduction of Eu(Tp(Me2))2OTf gives good yields of the highly insoluble homoleptic Ln(II) complexes, Ln(Tp(Me2))2 (Ln = Sm (1a), Yb (2a), Eu (3a)). Use of the additionally 4-ethyl substituted Tp(Me2,4Et) ligand produces the analogous, but soluble Ln(Tp(Me2,4Et))2 (1-3b) complexes. Soluble compounds are also obtained with the Tp(Ph) and Tp(Tn) ligands (Tn = thienyl), Ln(Tp(Ph))2 (Ln = Sm, 1c; Yb, 2c) and Ln(Tp(Tn))2 (Ln = Sm, 1d; Yb, 2d). To provide benchmark parameters for structural comparison the series of Sm(Tp(Me2))2X complexes (X = F, 1e; Cl, 1f; Br, 1g; I, 1h; BPh4, 1j) were prepared either via oxidation of the Sm(Tp(Me2))2 or salt metathesis from SmX3 (X = Cl, Br, I). The solid-state structures of 1-3a, 1b, 1-2c and 1e, 1f, 1h, and 1j were determined by single-crystal X-ray diffraction. The homoleptic bis-Tp complexes are all six-coordinate with trigonal antiprismatic geometries, planes of the kappa(3)-Tp ligands are parallel to one another. In the series of Sm(Tp(Me2))2X complexes the structure changes from seven-coordinate molecular compounds, with intact Sm-X bonds, for X = F, Cl, to six-coordinate ionic structures [Sm(Tp(Me2))2]X (X = I, BPh4), suitable crystals of the bromide compound could not be obtained. The dependence of the structures on the size of X is understandable in terms of the interplay between the size of the cleft that the [Sm(Tp(Me2))2](+) fragment can make available and the donor ability of the anionic group toward the hard Sm(III) center.     

Silylchalcogenolates MESiR(t)Bu(2) (M = Na, Cu, Zn, Fe; E = S, Se, Te; R = tBu, Ph) and disilyldichalcogenides tBu2RSiE-ESiRtBu2 (E = S, Se, Te; R = tBu, Ph): synthesis, properties, and structures

The sodium silyl chalcogenolates NaESiR(t)Bu(2) (R = Ph, (t)Bu; E = S, Se, Te), accessible by the nucleophilic degradation of S, Se, or Te by the sodium silanides NaSiR(t)Bu(2) (R = Ph, (t)Bu), have been characterized by X-ray structure analysis. Protonolysis of the sodium silyl chalcogenolates yields the corresponding chalcogenols. The Cu and Zn chalcogenolates, [Cu(SSiPh(t)Bu(2))](4) and [ZnCl(SSi(t)Bu(3))(THF)](2), have been synthesized by metathesis reactions of CuCl with NaSSiPh(t)Bu(2) and of ZnCl(2) with NaSSi(t)Bu(3), respectively. The solid-state structures of the transition metal thiolates have been determined. The compounds (t)Bu(2)RSiE-ESiR(t)Bu(2) (R = Ph, (t)Bu; E = S, Se, Te) are accessible via air oxidation. With the exception of (t)Bu(3)SiS-SSi(t)Bu(3), these compounds were analyzed using X-ray crystallography and represent the first structurally characterized silylated heavy dichalcogenides. Oxidative addition of (t)Bu(3)SiTe-TeSi(t)Bu(3) to Fe(CO)(5) yields [Fe(TeSi(t)Bu(3))(CO)(3)](2), which has also been structurally characterized.     

Synthesis and characterization of (Me3Si)2AsCH2RCH2As(SiMe3)2 (R = CH2, SiME2) and

The synthesis and characterization of (Me₃Si)₂AsCH₂RCH₂As(SiMe₃)₂ [R = CH₂ ( 1 ), SiMe₂ ( 2 )] is described. Compound 1 reacts with four equivalents of Ph₂GaCl to produce (3), whose structure was deduced by use of ¹H and ¹³C{¹H} NMR spectroscopy.