Thermal properties of amphiphilic biodegradable triblock copolymer of <Emphasis Type="SmallCaps">l</Emphasis>,<Emphasis Type="SmallCaps">l</Emphasis>-lactide and ethylene glycol

Samples of poly(l,l-lactide)-block-poly(ethylene glycol)-block-poly(l,l-lactide) (PLLA-PEG-PLLA) were synthesized from l,l-lactide polymerization using stannous 2-ethylhexanoate, Sn(Oct)₂ as initiator and di-hydroxy-terminated poly(ethylene glycol) (PEG) (M _n  = 4000 g mol⁻¹) as co-initiator. The chemical linkage between the PEG segment and the PLA segments was characterized by Fourier transform infrared spectroscopy (FTIR). Thermogravimetry analysis (TG) revealed the copolymers composition and was capable to show the deleterious effect of an excess of Sn(Oct)₂ in the polymer thermal stability, while Differential Scanning Calorimetry (DSC) allowed the observation of the miscibility between the PLLA and PEG segments in the different copolymers.     

Poly(<Emphasis Type="SmallCaps">l</Emphasis>-lactide) networks with tailored water sorption

A poly(l-lactide) diol was obtained through ring opening polymerization of l-lactide, using 1,6 hexanediol and tin(II) 2 ethylhexanoate as a catalyst. In the second step, the poly(l-lactide) macromer (mLA) was obtained by the reaction of poly(l-lactide) diol with methacrylic anhydride. The effective incorporation of the polymerizable end groups was assessed by Fourier transform infrared spectroscopy and nuclear magnetic resonance (¹H NMR). Besides, poly(l-lactide) networks (pmLA) were prepared by photopolymerization of mLA. Further, the macromer was copolymerized with 2-hydroxyethyl acrylate seeking to tailor the hydrophilicity of the system. A set of hydrophilic copolymer networks were obtained. The phase microstructure of the new system and the network architecture was investigated by differential scanning calorimetry, infrared spectroscopy, dynamic mechanical spectroscopy, thermogravimetry, and water sorption studies.     

Optical enzyme sensor for determining <Emphasis Type="SmallCaps">l</Emphasis>-lysine content using <Emphasis Type="SmallCaps">l</Emphasis>-lysine oxidase from the rockfish <Emphasis Type="BoldItalic">Sebastes schlegeli</Emphasis>

l-Lysine (l-Lys) in living bodies is critical for metabolism; therefore, determination of its levels in food is important. Most enzymatic methods for l-Lys analysis are performed using l-lysine oxidase (LyOx), but commercially manufactured LyOx is generally not highly selective for l-Lys among amino acids. We previously isolated LyOx as an antibacterial protein secreted from the skin of the rockfish Sebastes schlegeli. In the present study, we developed an optical enzyme sensor system for rapid and continuous determination of l-Lys using this LyOx. The system comprised an immobilized LyOx membrane, an optical oxygen probe, a flow system, and a personal computer. The amount of l-Lys was detected as a decrease in the oxygen concentration due to the LyOx reaction. The specificity of the sensor was examined against various amino acids. The sensor response was specific for l-Lys. Good reproducibility was obtained in 58 assays. The response of the sensor using commercially prepared LyOx was unstable compared with the response using LyOx isolated in our laboratory. Our sensor system could be used for 5 weeks without our having to change the enzyme membrane. The calibration curve for a standard l-Lys solution was linear from 0.1 to 3.0 mmol L⁻¹. One assay could be completed within 2 min. The sensor was applied to determine the l-Lys content in food samples such as bonito cooking water and scallop hepatopancreas. The values obtained using the sensor and conventional high-performance liquid chromatography methods were well correlated.     

Temperature- and pressure-responsive properties of <Emphasis Type="SmallCaps">l</Emphasis>- and<Emphasis Type="SmallCaps"> dl</Emphasis>-forms of poly(<Emphasis Type="Italic">N</Emphasis>-(1-hydroxymethyl)propylmethacrylamide) in aqueous solutions

The structural transition of the l- and dl forms of poly(N-(1- hydroxymethyl)propylmethacrylamide (PHMPMA) in aqueous solution was studied by measuring the pressure dependence of the apparent scattering intensity, differential scanning calorimetry (DSC), and circular dichroism (CD). The thermodynamic implications of the results are discussed in relation to the chiral structure of the side chain, and differences in the thermal and barometric transitions. T-P diagrams of the transition showed characteristic ellipsoid features. Antagonism of the temperature and pressure effects was observed only for P(dl-HMPMA). For P(l-HMPMA), the transition temperature (T _tr) decreased with increasing pressure, and the highest T _tr was observed at atmospheric pressure (0.1 MPa). For both polymers, the highest P _trs were observed at the lowest temperatures. The l polymer showed a specific negative peak in its CD spectrum at around 220 nm in the lower temperature region and the temperature dependence was reproduced by a single-step transition, with the midpoint corresponding to the T _tr obtained from the scattering measurements. Coupled with the results from the DSC, the different behavior between the P(l-HMPMA) and P(dl-HMPMA) could be explained in terms of the chain states before and after the transition. The cooperative factors derived from the DSC measurement revealed that about 4 to 5 polymers of the present size were necessary to perform a thermal transition for P(l-HMPMA), and that P(dl-HMPMA) underwent its transition as an almost single molecular event.This revised version was published online in June 2005 with correction to the article category.     

Extracellular Production and Characterization of Two <Emphasis Type="Italic">Streptomyces</Emphasis><Emphasis Type="SmallCaps">l</Emphasis>-Asparaginases

l-Asparaginase (ASNase) has proved its use in medical and food industries. Sequence-based screening showed the thermophilic Streptomyces strain Streptomyces thermoluteus subsp. fuscus NBRC 14270 (14270 ASNase) to positive against predicted ASNase primary sequences. The 14270 ASNase gene and four l-asparaginase genes from Streptomyces coelicolor, Streptomyces avermitilis, and Streptomyces griseus (SGR ASNase) were expressed in Streptomyces lividans using a hyperexpression vector: pTONA5a. Among those genes, only 14270 ASNase and SGR ASNase were successful for overexpression and detected in culture supernatants without an artificial signal peptide. Comparison of the two Streptomyces enzymes described above demonstrated that 14270 ASNase was superior to SGR ASNase in terms of optimum temperature, thermal stability, and pH stability.     

Studies on synthesis and in vitro biodegradability of novel optically active nanostructure poly(ester-imide)s containing <Emphasis Type="SmallCaps">l</Emphasis>-phenylalanine and <Emphasis Type="SmallCaps">l</Emphasis>-isoleucine linkages

A series of biodegradable functional amino-acid-based poly(ester-imide)s (PEI)s were designed and synthesized by the direct polycondensation reaction of chiral diacids composed of naturally occurring α-amino acids with 4,4′-thiobis(2-tert-butyl-5-methylphenol) in the presence of tosyl chloride, pyridine, and N,N-dimethylformamide as a condensing agent. These new chiral polymers were characterized with respect to chemical structure and purity using specific rotation experiments, FT-IR, ¹H-NMR, techniques, and elemental analysis. The surface morphology of these polymers was investigated by field emission scanning electron microscopy. The result indicated nanoscale morphology of the obtained polymers. Thermal stability and the weight loss behavior of the resulting PEIs were studied by TGA techniques. All PEIs showed no significant weight loss below 400 °C in a N₂ environment. The monomers and prepared polymers were co-cultivated with airborne fungal spores in culture media to study their biological activity. Soil burial test was also used for evaluation of their biodegradation behavior. The results showed that the synthesized monomers and their derived polymers are biologically active and that their degradation products are probably nontoxic to microbial growth.     

Mixtures poly((<Emphasis Type="Italic">R</Emphasis>)-3-hydroxybutyrate) and poly(<Emphasis Type="SmallCaps">l</Emphasis>-lactic acid) subjected to DSC

Blends of bacterial poly((R)-3-hydroxybutyrate) (PHB) and poly(l-lactic acid) (PLLA) synthesized by polycondensation of l-lactic acid or by ring-opening polymerization of l-lactide were studied. Miscibility was investigated through both conventional differential scanning calorimetry (DSC) and temperature-modulated DSC (TMDSC). PHB and low-molar mass PLLA were miscible in a whole concentration range, and a single glass transition temperature was observed. On the other hand, PHB/high-molar mass PLLA mixtures phase separate, giving rise to two glass transition temperatures corresponding to PHB and PLLA. A treatment of blends at 190 °C leads to formation of block/multiblock/random copolymers, and blends become miscible.     

Preparation of nanoparticle colloids of methoxy poly(ethylene glycol)-<Emphasis Type="Italic">b</Emphasis>-poly(<Emphasis Type="SmallCaps">D</Emphasis>,<Emphasis Type="SmallCaps">L</Emphasis>-lactide): effects of surfactant and organic solvent

Nanoparticle colloids of methoxy poly(ethylene glycol)-b-poly(D,L-lactide) (MPEG-b-PDLL) diblock copolymer were prepared by a modified spontaneous emulsification solvent diffusion method using acetone/ethanol as the mixture organic solvents. The MPEG-b-PDLL was synthesized by ring-opening polymerization of D,L-lactide using stannous octoate and MPEG with molecular weight of 5,000 g/mol as the initiating system. The MPEG-b-PDLL obtained was an amorphous polymer with molecular weight of 73,600 g/mol. Influences of acetone/ethanol (v/v) ratios and Tween 80 surfactant concentrations on characteristics of the colloidal nanoparticles were investigated and discussed. Light-scattering analysis showed that average diameters of the surfactant-free colloidal nanoparticles were in the range of 86–124 nm. The nanoparticle sizes decreased as the ethanol ratio increased. The Tween 80 did not show the significant effect on the nanoparticle sizes. Scanning electron micrographs of dried nanoparticles that demonstrated the aggregation of most particles suggested they were the soft nanoparticles. However, the dried nanoparticle morphology can be observed from scanning electron microscopy as having a spherical shape and smooth surfaces.     

Enthalpy characteristics of dissolution of <Emphasis Type="SmallCaps">l</Emphasis>-cysteine and <Emphasis Type="SmallCaps">l</Emphasis>-asparagine in aqueous solutions of acetonitrile and dimethyl sulfoxide at 298.15 K

The integral enthalpies of dissolution Δ_sol H ^m of l-cysteine and l-asparagine in mixtures of water with acetonitrile and dimethyl sulfoxide at the concentration of organic solvent up to 0.32 molar fractions were measured by means of dissolution calorimetry. The standard enthalpies of dissolution (Δ_sol H°) and transfer (Δ_trans H°) of the amino acids from water to a mixed solvent were calculated. The enthalpy coefficients of pair interactions for L-cysteine and L-asparagine with cosolvent molecules are positive, except for the L-asparagine-water-acetonitrile system. The concepts on the prevailing effect of specific interactions in solutions and the influence of the nature of the cosolvents and lateral substituents of the amino acids on the thermochemical characteristics of dissolution were used to explain the data obtained.     

Tyrosine alkyl esters as prodrug: the structure and intermolecular interactions of <Emphasis Type="SmallCaps">l</Emphasis>-tyrosine methyl ester compared to <Emphasis Type="SmallCaps">l</Emphasis>-tyrosine and its ethyl and <Emphasis Type="Italic">n</Emphasis>-butyl esters

l-Tyrosine alkyl esters are used as prodrugs for l-tyrosine. Although prodrugs are often designed for their behavior in solution, understanding their solid-state properties is the first step in mastering drug delivery. The crystal structure of l-tyrosine methyl ester has been determined and compared to published structures of l-tyrosine and its ethyl and n-butyl esters. It is almost isostructural with the other esters: it crystallizes in the orthorhombic chiral space group P2₁2₁2₁, a = 5.7634(15) Å, b = 12.111(2) Å, c = 14.3713(19) Å, V = 1003.1(4) Å³ with Z′ = 1. Their main packing motif is a C(9) infinite hydrogen-bond chain, but the conformation of l-tyrosine methyl ester is different from the other two: eclipsed versus U-shaped, respectively. The published structure of the ethyl ester, which was incomplete, has been confirmed by X-ray powder diffraction data. Because l-tyrosine methyl ester is very stable (28 years stored at room temperature), and its hydrolysis rate is relatively low, it should be one of the better prodrugs among the alkyl esters of tyrosine.     

The electrochemical polymerization of <Emphasis Type="Italic">o</Emphasis>-phenylenediamine on <Emphasis Type="SmallCaps">l</Emphasis>-tyrosine functionalized glassy carbon electrode and its application

The polymerization of o-phenylenediamine (OPD) on l-tyrosine (Tyr) functionalized glassy carbon electrode (GCE) and its electro-catalytic oxidation towards ascorbic acid (AA) had been studied in this report. l-Tyrosine was first covalently grafted on GCE surface via electrochemical oxidation, which was followed by the electrochemical polymerization of OPD on the l-tyrosine functionalized GCE. Then, the poly(o-phenylenediamine)/l-tyrosine composite film modified GCE (POPD-Tyr/GCE) was obtained. X-ray photo-electron spectroscopy (XPS), field emission scanning electron microscope (SEM), and electrochemical techniques have been used to characterize the grafting of l-tyrosine and the polymerization and morphology of OPD film on GCE surface. Due to the doping of the carboxylic functionalities in l-tyrosine molecules, the POPD film showed good redox activity in neutral medium, and thus, the POPD-Tyr/GCE exhibited excellent electrocatalytic response to AA in 0.1 mol l⁻¹ phosphate buffer solution (PBS, pH 6.8). The anode peak potential of AA shifted from 0.58 V at GCE to 0.35 V at POPD-Tyr/GCE with a greatly enhanced current response. A linear calibration graph was obtained over the AA concentration range of 2.5 × 10⁻⁴–1.5 × 10^–3 mol l⁻¹ with a correlation coefficient of 0.9998. The detection limit (3δ) for AA was 9.2 × 10⁻⁵ mol l⁻¹. The modified electrode showed good stability and reproducibility and had been used for the determination of AA content in vitamin C tablet with satisfactory results.     

Development of an Amperometric Biosensor Platform for the Combined Determination of <Emphasis Type="SmallCaps">l</Emphasis>-Malic,Fumaric, and <Emphasis Type="SmallCaps">l</Emphasis>-Aspartic Acid

Three amperometric biosensors have been developed for the detection of l-malic acid, fumaric acid, and l -aspartic acid, all based on the combination of a malate-specific dehydrogenase (MDH, EC 1.1.1.37) and diaphorase (DIA, EC 1.8.1.4). The stepwise expansion of the malate platform with the enzymes fumarate hydratase (FH, EC 4.2.1.2) and aspartate ammonia-lyase (ASPA, EC 4.3.1.1) resulted in multi-enzyme reaction cascades and, thus, augmentation of the substrate spectrum of the sensors. Electrochemical measurements were carried out in presence of the cofactor β-nicotinamide adenine dinucleotide (NAD⁺) and the redox mediator hexacyanoferrate (III) (HCFIII). The amperometric detection is mediated by oxidation of hexacyanoferrate (II) (HCFII) at an applied potential of + 0.3 V vs. Ag/AgCl. For each biosensor, optimum working conditions were defined by adjustment of cofactor concentrations, buffer pH, and immobilization procedure. Under these improved conditions, amperometric responses were linear up to 3.0 mM for l-malate and fumarate, respectively, with a corresponding sensitivity of 0.7 μA mM^?1 (l-malate biosensor) and 0.4 μA mM^?1 (fumarate biosensor). The l-aspartate detection system displayed a linear range of 1.0–10.0 mM with a sensitivity of 0.09 μA mM^?1. The sensor characteristics suggest that the developed platform provides a promising method for the detection and differentiation of the three substrates.     

Rapid Determination of <Emphasis Type="SmallCaps">l</Emphasis>-Glutamine using Engineered <Emphasis Type="Italic">Escherichia coli</Emphasis> Overexpressing Glutamine Synthetase

A genetically engineered Escherichia coli was developed as the source of enzyme for rapidly quantifying glutamine. E. coli BL21 (DE3) cells overexpressing a glutamine synthetase from Bacillus subtilis were prepared as tube aliquots and used in a small volume of nontoxic mixture. The current method was compared to high performance liquid chromatography analysis, Sigma kit (GLN-1) and Mecke method. The method is applicable to a wide range of glutamine concentrations (0.05–2.5 mM) and correlates well to the detection results obtained from high performance liquid chromatography (Pearson correlation is 0.978 at the 0.01 level). Moreover, the whole assay procedure takes less than 15 min and uses nontoxic reagents, so it can be applied to monitor glutamine production and utilization conveniently.     

A Comprehensive Review on <Emphasis Type="SmallCaps">l</Emphasis>-Asparaginase and Its Applications

l-asparaginase (LA) catalyzes the degradation of asparagine, an essential amino acid for leukemic cells, into ammonia and aspartate. Owing to its ability to inhibit protein biosynthesis in lymphoblasts, LA is used to treat acute lymphoblastic leukemia (ALL). Different isozymes of this enzyme have been isolated from a wide range of organisms, including plants and terrestrial and marine microorganisms. Pieces of information about the three-dimensional structure of l-asparaginase from Escherichia coli and Erwinia sp. have identified residues that are essential for catalytic activity. This review catalogues the major sources of l-asparaginase, the methods of its production through the solid state (SSF) and submerged (SmF) fermentation, purification, and characterization as well as its biological roles. In the same breath, this article explores both the past and present applications of this important enzyme and discusses its future prospects.     

New tin(<Emphasis Type="SmallCaps">iv</Emphasis>) <Emphasis Type="Italic">o</Emphasis>-iminosemiquinone complexes

New tin(iv) mono- and bis-o-iminosemiquinone complexes were obtained by the exchange reaction of radical anion lithium salt of 4,6-di-tert-butyl-N-(2,6-diisopropylphenyl)-o-imino-benzoquinone with tin(iv) organochlorides. The compounds synthesized were characterized by EPR spectroscopy and X-ray diffraction analysis. Substituents on the tin atom were found to affect stability of paramagnetic metal derivatives formed.     

Probing the micellization of diblock and triblock copolymers of poly(<Emphasis Type="SmallCaps">l</Emphasis>-lactide) and poly(ethylene glycol) in aqueous and NaCl salt solutions

The micelle formation of a series of amphiphilic block copolymers in aqueous and NaCl solutions was studied by a fluorescent probe technique using pyrene as a "model drug". These copolymers were synthesized from poly (ethylene glycol) (PEG) and l-lactide by a new calcium ammoniate catalyst. They had fixed PEG block lengths (44, 104 or 113 ethylene oxide units) and various poly(l-lactide) (PLLA) block lengths (15–280 lactide units). The critical micelle concentration (cmc) was found to decrease with increasing PLLA content. The distinct dissimilarity of the cmc values of diblock and triblock copolymers based on the same block length of PEG provided evidence for the different configurations of their micelles. It was also observed that the introduction of NaCl salt significantly contributed to a decrease in the cmcs of the copolymers with short PEG and PLLA blocks, while it had less influence on the cmcs of copolymers with long PEG or PLLA blocks. The dependence of partition coefficients ranging from 0.2×10⁵ to 1.9×10⁵ on the PLLA content in the copolymer and on the micelle configuration was also discussed. The contribution of NaCl salt to increasing the partition of pyrene into a micellar phase was observed.     

Ferrocene-containing tri- and tetranuclear cyclic copper(<Emphasis Type="SmallCaps">i</Emphasis>) and silver(<Emphasis Type="SmallCaps">i</Emphasis>) pyrazolates

New tri- and tetranuclear macrocyclic silver(i) and copper(i) 3-ferrocenyl-5-(trifluoromethyl)pyrazolates were prepared: [{(3-((η⁵-C₅H₄)Fe(η⁵-C₅H₅))-5-(CF₃)-Pz}M]₃ (M = Cu (1), Ag (2)) and [{(3-(( η⁵-C₅H₄)Fe(η⁵-C₅H₅))-5-(CF₃)-Pz}Cu]₄ (3). The structures of compounds were established by X-ray diffraction analysis. In the crystalline state, a planar trinuclear silver-containing macrocycliс pyrazolate and a saddle-shaped tetranuclear copper-containing macrocycle are formed. The introduction of a bulky substituent, ferrocene, into the pyrazole ligand results in complete shielding of the acidic metal sites, which precludes the coordination of base molecules.     

Optimization of Fermentation Conditions for the Biosynthesis of <Emphasis Type="SmallCaps">l</Emphasis>-Threonine by <Emphasis Type="Italic">Escherichia coli</Emphasis>

In this study, the fed-batch fermentation technique was applied to improve the yield of l-threonine produced by Escherichia coli TRFC. Various fermentation substrates and conditions were investigated to identify the optimal carbon source, its concentration and C/N ratio in the production of l-threonine. Sucrose was found to be the optimal initial carbon source and its optimal concentration was determined to be 70 g/L based on the results of fermentations conducted in a 5-L jar fermentor using a series of fed-batch cultures of E. coli TRFC. The effects of glucose concentration and three different feeding methods on the production of l-threonine were also investigated in this work. Our results showed that the production of l-threonine by E. coli was enhanced when glucose concentration varied between 5 and 20 g/L with DO-control pulse fed-batch method. Furthermore, the C/N ratio was a more predominant factor than nitrogen concentration for l-threonine overproduction and the optimal ratio of ammonium sulfate to sucrose (g/g) was 30. Under the optimal conditions, a final l-threonine concentration of 118 g/L was achieved after 38 h with the productivity of 3.1 g/L/h (46% conversion ratio from glucose to threonine).     

Production of 6-<Emphasis Type="Italic">O</Emphasis>-<Emphasis Type="SmallCaps">l</Emphasis>-Ascorbyl Palmitate by Immobilized <Emphasis Type="Italic">Candida antarctica</Emphasis> Lipase B

l-ascorbyl palmitate (ASP) is an oil-soluble derivative of ascorbic acid which is used extensively in food, cosmetics industry, and medical hygiene. Enzymatic synthesis of ascorbyl palmitate in tert-butyl alcohol was carried out using indigenously immobilized lipase preparation PyCal with ascorbic acid and palmitic acid as starting material. The developed batch process under optimized reaction conditions resulted in conversion of 90% with relatively shorter reaction time of 6 h. Continuous process in packed bed reactor gave conversion of 50% with space time yield of 15.46 g/L/h which was found to be higher than the reported literature on enzymatic synthesis of ascorbyl palmitate. The immobilized lipase used in the present work showed good reusability. Characterization of formed ascorbyl palmitate was carried out by FTIR, MS/MS, H¹-NMR, and C¹³-NMR. The enzymatic process resulted in selective synthesis of 6-O-l-ascorbyl palmitate with purity of 98.6% and no side product formation. The use of underivatized starting materials, high space time yield of 15.46 g L^?1 h^?1, high recyclability of catalyst, and no by-product formation make the overall process highly efficient and clean in terms of energy consumption and waste generation, respectively. The optimized reaction parameters for ascorbyl palmitate synthesis in the present study can be used as a useful reference for industrial synthesis of fatty acid esters of ascorbic acid by enzymatic route.     

Enhanced <Emphasis Type="SmallCaps">l</Emphasis><Emphasis Type="Italic">-</Emphasis>(+)-Lactic Acid Production by an Adapted Strain of <Emphasis Type="Italic">Rhizopus oryzae</Emphasis> using Corncob Hydrolysate

Corncob is an economic feedstock and more than 20 million tons of corncobs are produced annually in China. Abundant xylose can be potentially converted from the large amount of hemicellulosic materials in corncobs, which makes the crop residue an attractive alternative substrate for a value-added production of a variety of bioproducts. Lactic acid can be used as a precursor for poly-lactic acid production. Although current industrial lactic acid is produced by lactic acid bacteria using enriched medium, production by Rhizopus oryzae is preferred due to its exclusive formation of the l-isomer and a simple nutrition requirement by the fungus. Production of l-(+)-lactic acid by R. oryzae using xylose has been reported; however, its yield and conversion rate are poor compared with that of using glucose. In this study, we report an adapted R. oryzae strain HZS6 that significantly improved efficiency of substrate utilization and enhanced production of l-(+)-lactic acid from corncob hydrolysate. It increased l-(+)-lactic acid final concentration, yield, and volumetric productivity more than twofold compared with its parental strain. The optimized growth and fermentation conditions for Strain HZS6 were defined.