Hyperbranched polyurethane as novel solid-solid phase change material for thermal energy storage

A series of novel hyperbranched polyurethane copolymer (HB-PUPCM) using hyperbranched polyester as chain extender was prepared via a two-step process. The phase transition behaviors and morphology of the HB-PUPCM films were investigated using differential scanning calorimetry (DSC), dynamic mechanical thermal analysis (DMA), thermo-gravimetric analysis (TGA), wide-angle X-ray diffraction (WAXD), polarizing optical microscopy (POM) and tapping-mode atomic force microscopy (AFM). HB-PUPCM was proven to a good polymeric solid-solid phase change heat storage material.     

Synthesis and thermal energy storage properties of a calcium-based room temperature phase change material for energy storage

Journal of Thermal Analysis and Calorimetry - In order to obtain a low-cost, high latent heat and thermostable phase change material with a phase change temperature between 18 and...     

Thermodynamic and thermal energy storage properties of a new medium-temperature phase change material

Journal of Thermal Analysis and Calorimetry - Phase change materials (PCMs) that can store the heat energy obtained from intermittent solar irradiation are very important for solar energy...     

Preparation and characterization of a novel form-stable phase change material for thermal energy storage

Journal of Thermal Analysis and Calorimetry - A series of novel polymeric form-stable phase change materials (FSPCMs) composed of poly(trimethylolpropane trimethacrylate-stearyl methacrylate) (PTS)...     

Synthesis of the polyethylene glycol solid-solid phase change materials with a functionalized graphene oxide for thermal energy storage

Polyethylene glycol (PEG) as a phase change material possesses three obstacles, such as leakage, low thermal conductivity and low thermal stability. A novel solid-solid phase change material (PCM) based on functionalized graphene oxide (GO), Polyethylene glycol (PEG) was prepared, and the three obstacles of PEG as a PCM was solved in one and the same material. Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), Raman and Transmission electron microscope (TEM), X-ray diffraction (XRD), differential scanning calorimetry (DSC), thermogravimetric analysis (TG) and thermogravimetric analysis/infrared spectrometry (TG-IR) were used to study the properties of supporting material and composite PCM (CPCM). The results indicated that the PEG was grafted on the surface of the supporting material; Compared with pure PEG, the latent heat of CPCM with 9.6 wt% supporting material decreased only 5.3%, however, the thermal conductivity of CPCM increased 111% and the heat peak release rate of CPCM decreased 33.4%.     

Capric acid/intercalated diatomite as form-stable composite phase change material for thermal energy storage

Journal of Thermal Analysis and Calorimetry - Leakage issue and low thermal conductivity largely restrict feasibility of fatty acid in real application of thermal energy storage (TES). In this...     

Thermodynamic insights into n-alkanes phase change materials for thermal energy storage

n-Alkanes have been widely used as phase change materials (PCMs) for thermal energy storage applications because of their exceptional phase transition performance, high chemical stability, long term cyclic stability and non-toxicity. However, the thermodynamic properties, especially heat capacity, of n-alkanes have rarely been comprehensively investigated in a wide temperature range, which would be insufficient for design and utilization of n-alkanes-based thermal energy storage techniques. In this study, the thermal properties of n-alkanes (C₁₈H₃₈-C₂₂H₄₆), such as thermal stability, thermal conductivity, phase transition temperature and enthalpy were systematically studied by different thermal analysis and calorimetry methods, and compared with previous results. Thermodynamic property of these n-alkanes was studied in a wide temperature range from 1.9 K to 370 K using a combined relaxation (Physical Property Measurement System, PPMS), differential scanning and adiabatic calorimetry method, and the corresponding thermodynamic functions, such as entropy and enthalpy, were calculated based on the heat capacity curve fitting. Most importantly, the heat capacities and related thermodynamic functions of n-heneicosane and n-docosane were reported for the first time in this work, as far as we know. This research work would provide accurate and reliable thermodynamic properties for further study of n-alkanes-based PCMs for thermal energy storage applications.     

Experimental study on novel phase change composites for thermal energy storage

Journal of Thermal Analysis and Calorimetry - In this study, beeswax is studied as a phase change material (PCM) to store heat due to its high latent heat. The disadvantages of using beeswax were...     

Nanoencapsulation of oleic acid phase change material with Ag2O nanoparticles-based urea formaldehyde shell for building thermal energy storage

Journal of Thermal Analysis and Calorimetry - Nanoencapsulated phase change material (NEPCM) was prepared with oleic acid as phase change material by its encapsulation into Ag2O nanoparticles...     

Spatiotemporal phase change materials for thermal energy long-term storage and controllable release

Phase change materials(PCMs) have attracted much attention in the field of solar thermal utilization recently, due to their outstanding thermal energy storage performance. However, PCMs usually release their stored latent heat spontaneously as the temperature below the phase transition temperature, rendering thermal energy storage and release uncontrollable, thus hindering their practical application in time and space. Herein, we developed erythritol/sodium carboxymethylcellulose/tetrasodium eth...     

Thermal energy storage properties and thermal reliability of PEG/bone char composite as a form-stable phase change material

Journal of Thermal Analysis and Calorimetry - Bone char (BC) is a promising porous material that can be used for preparing a form-stable composite phase change material (PCM). In this paper,...     

Na-montmorillonite clay as thermal energy storage material

Sodium montmorillonite (Na-M) was investigated as an energy storage material. The study was conducted through the adsorption isotherms, infrared (IR) spectroscopic and differential thermal analysis (DTA). The clay systems were subjected to different preheating temperature, 125, 160, and 200°C, before subjecting the clay to the adsorption process carried out. The adsorptive capacities of Na-M ranged between 0.12 and 0.48 g H₂O/g of dry clay, depending on the preheating conditions of the clay. The stored energy of Na-M 781 cal/g when the clay preheated to 200°C, at which the clay has lost all the water molecules that could be evaporated, and become, therefore, able to adsorb the maximum amount of water vapor allowed. Na-M, when appropriately set, could be considered as an energy storage material.     

Thermo-physical characterization of some paraffins used as phase change materials for thermal energy storage

Three phase change paraffinic materials (PCMs) were thermophysically (phase-transition temperatures, latent heat, heat capacity at constant pressure, density, and thermal conductivity) investigated in order to be used as latent heat storage media in a pilot plant developed in Plovdiv Bulgaria. Raman structural investigation probes aliphatic character of the E53 sample, while the E46 and ECP samples contain also unsaturated components due to their Raman features within 1,500–1,700 cm^?1 range. Orthorhombic structure of the three PCMs was evidenced by the Raman modes at the 1,417 cm^?1. The highest latent heat value, ΔH, of phase transitions among the three materials was represented by summation of a solid order–disorder, and melting latent heat was encountered by the E53 paraffin, i.e., 194.32 J g^?1 during a μ-DSC scan of 1 °C min^?1. Conversely, the ECP composite containing ceresin component shows the lowest latent heat value of 143.89 J g^?1 and the highest thermal conductivity of 0.46 W m^?1 K^?1 among the three phase change materials (PCMs). More facile melt-disordered solid transition with the activation energy of 525.45 kJ mol^?1 than the lower temperature transition of disorder–order (E _a of 631.73 kJ mol^?1) during the two-step process of solidification for the E53 melt are discussed in terms of structural and molecular motion changes.     

Comparison of different approaches for thermal performance improvement of a phase change energy storage system

Journal of Thermal Analysis and Calorimetry - Performance improvement of a phase change material (PCM) thermal storage system is numerically investigated. A finite volume solver is employed to...     

Experimental investigation of drying of garlic clove in solar dryer using phase change material as energy storage

This investigation deals with thermodynamic analysis, which offers an alternative approach to evaluate the performance of solar dryers and thin-layer drying characteristics of garlic cloves in a developed system. The garlic cloves were dried from a moisture content of 55.5 % (w.b.) to 6.5 % (w.b.) for 8 h. The drying data obtained were fitted to five different drying kinetics models. Of these, the model suggested by Midilli et al. [28] had the best fit with the drying behavior of garlic cloves. The energy efficiency without and with recirculation of the air exiting the drying chamber during the study varied from 43.06 to 83.73 %, and 3.98 to 14.95 %, respectively, while the exergy efficiency corresponding to the energy efficiency of the drying process ranged from 5.01 to 55.30 % and 67.06 to 88.24 %, respectively.     

Preparation and characterization of n-octadecane-based reversible gel as form-stable phase change materials for thermal energy storage

Journal of Thermal Analysis and Calorimetry - In this study, a series of gelators (Gn, n is the number of carbon atoms of used fatty alcohol, n?=?2, 4, 6, 8, 10, 12, 14, 16 and 18) were...     

Synthesis and properties of bulk-biodegradable phase change materials based on polyethylene glycol for thermal energy storage

The bulk-biodegradable solid–solid phase change materials (SSPCMs) based on phase change polyethylene glycol (PEG) were synthesized by solvent-free polyaddition. On the basis of the fact that the water absorption is up to 800 mass% and that the poly(ethylene oxide) molecular chains can be degraded by microorganisms, the bulk-biodegradable mechanism of SSPCMs was put forward and studied. The X-ray diffraction patterns and the polarizing optical microscopy images show the SSPCMs possess the defective crystal and small grain compared with PEG. The differential scanning calorimetry data demonstrate the melting temperature and enthalpy of the synthesized SSPCMs are, respectively, 41 °C and 128 J g^?1. The bulk-biodegradable SSPCMs have the preeminent thermal reliability and the high thermal stability due to the onset thermal degradation temperature above 302 °C, which will give a good insight into bulk-biodegradable PCM system.     

Integrating thermal energy storage and microwave absorption in phase change material-encapsulated core-sheath MoS2@CNTs

Developing advanced nanocomposite integrating solar-driven thermal energy storage and thermal management functional microwave absorption can facilitate the cutting-edge application of phase change materials(PCMs).To conquer this goal,herein,two-dimensional MoS₂ nanosheets are grown in situ on the surface of one-dimensional CNTs to prepare core-sheath MoS₂@CNTs for the encapsulation of paraffin wax(PW).Benefiting from the synergistic enhancement photothermal effect of MoS