Heat release during the hydration of calcinated α-C<Subscript>2</Subscript>SH and its mixture with killalaite

In this work, the influence of the mineral composition of the synthesized calcium silicate hydrates on their hydraulic activity after thermal treatment was determined. Primary mixture, consisting of quartz sand and burnt limestone (CaO/SiO₂ = 2), was treated hydrothermally with NaOH additive at 200 °C. It was determined that α-C₂SH prevailed in the product after 4 h of the synthesis. The results of DSC and XRD analysis revealed that α-C₂SH was partially decomposed after 12 h of the synthesis and newly formed compounds were identified—killalaite, portlandite and C–S–H. The products of 4 and 12 h synthesis were treated thermally at temperatures between 450 and 1000 °C. It was determined that dellaite and x-C₂S formed already at 450 °C, β-C₂S at 600 °C and α′_L-C₂S at 800 °C when the 4 h synthesis product, in which α-C₂SH prevailed, was treated thermally. On the other hand, killalaite remained stable up to 600 °C, and the temperature values, at which mentioned calcium silicates formed, increased in case of a 12 h synthesis product. Heat flow values of the main hydration reaction and total heat release exceeded 3.1 mW g^?1 and 140 J g^?1 accordingly in case of the samples in which α-C₂SH prevailed. However, increase in the thermal treatment temperature resulted in a decrease in the mixtures hydraulic activity. It was proved that killalaite formation in the product of the 12 h hydrothermal synthesis vividly decreases its hydraulic activity after the thermal treatment in the temperature range of 450–1000 °C. No increment in the heat flow values that could be attributed to the main hydration reaction (acceleration period) was witnessed in all the curves of the heat flow analysis in this case.     

The effect of the synthesis method on the morphological and luminescence characteristics of α-Zn<Subscript>2</Subscript>V<Subscript>2</Subscript>O<Subscript>7</Subscript>

A promising yellow phosphor, α-Zn₂V₂O₇, was synthesized at temperatures below the phase transition temperature (610 ± 5°C) by three different methods: solid-phase and microwave processes and thermolysis of a water–salt composition. According to powder X-ray diffraction, the structures of all samples belonged to space group C/2c. Depending on the method of synthesis, the particle size varied from 500 nm (thermolysis of a water–salt composition) to 5–8 μm (ceramic and microwave methods). The excitation spectra of all samples are in the UV region (220–400 nm) and the emission spectra are in the 400–750 nm wavelength range. The photoluminescence spectra of the samples are non-elementary, which is caused by specific features of the electronic charge transfer in the structural VO₄ tetrahedra.     

Porous xerogels with a bifunctional surface layer of the composition ≡Si(CH<Subscript>2</Subscript>)<Subscript>3</Subscript>SH/≡Si(CH<Subscript>2</Subscript>)<Subscript>2</Subscript>H<Subscript>3</Subscript>

The sol-gel method with ethanol as a solvent and fluoride ion as a catalyst was used to prepare polysiloxane xerogels containing both 3-mercaptopropyl and n-propyl groups in the surface layer. An increase in the relative amount of n-propyltriethoxysilane in the initial reaction solution was found to result in the formation of xerogels with developed porous structures, which was accompanied by an increase in the specific surface area from 370 to 550 m²/g; simultaneously, other porous structure parameters such as sorption volume and pore size exhibited a tendency to increase. Atomic-force microscopy was used to show that the xerogels synthesized comprised aggregates of mean size 30 nm. An analysis of the IR and ¹³C cross-polarization magic angle spinning NMR data led us to conclude that the surface layer of bifunctional xerogels contained not only 3-mercaptopropyl and n-propyl groups but also silanol groups, part of nonhydrolyzed alkoxy groups, and H-bonded water molecules. The ²⁹Si cross-polarization magic angle spinning NMR spectra revealed the presence of structural units of the compositions T¹ [(≡SiO)Si(OR’)₂(CH₂CH₂CH₃) and/or (≡SiO)Si(OR’)₂(CH₂)₃SH, R’ = H, OCH₃, or OC₂H₅], T² [(≡SiO)₂Si(OR’)(CH₂CH₂CH₃) and (≡SiO)₂Si(OR’)(CH₂)₃SH], and T³ [(≡SiO)₃SiCH₂CH₂CH₃ and (≡SiO)₃Si(CH₂)₃SH] in the xerogels synthesized.     

Synthesis and investigation of the heat capacity of Sm<Subscript>2</Subscript>Sn<Subscript>2</Subscript>O<Subscript>7</Subscript> in the 346–1050 K range

Optimal conditions for the synthesis of Sm₂Sn₂O₇ with pyrochlore crystal structure by solid-phase reactions were determined. The effect of temperature (346–1050 K) on the molar heat capacity of samarium stannate was studied by differential scanning calorimetry. Thermodynamic properties of Sm₂Sn₂O₇ in the temperature range under study were determined using the experimental data.     

Synthesis and heat capacity study of stannates Dy<Subscript>2</Subscript>Sn<Subscript>2</Subscript>O<Subscript>7</Subscript> and Ho<Subscript>2</Subscript>Sn<Subscript>2</Subscript>O<Subscript>7</Subscript> in the range 370–1000 K

Stannates Dy₂Sn₂O₇ and Ho₂Sn₂O₇ are produced by solid-phase synthesis from Dy₂O₃ (Ho₂O₃)–SnO₂ stoichiometric mixtures by calcining at 1473 K. The molar heat capacity of holmium and dysprosium stannates is measured by differential scanning calorimetry (DSC) in the temperature range 370–1000 K. The experimental data are used to calculate thermodynamic properties (enthalpy change H°(T)–H°(370 K), entropy change S°(T)–S°(370 K), and the reduced Gibbs free energy Φ°(T)) of the synthesized compound.     

The effect of temperature on the formation of titanium dioxide structures on γ-Al<Subscript>2</Subscript>O<Subscript>3</Subscript> surface

The effect of calcination temperature of hydrated gamma-aluminum oxide on the phase formation of surface structures and the content of titanium in them in the course of successive treatment of the initial matrix with TiCl₄ and H₂O was determined.     

Effects of Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> on the crystallization and structure of CaO–Fe<Subscript>2</Subscript>O<Subscript>3</Subscript>–SiO<Subscript>2</Subscript> glass ceramics

Radiation-induced degradation of the weakly and strongly 4-vinylpyridine basic ion exchange resins by gamma radiolysis was investigated in the presence of air and liquid water. This study is focused on evaluating the radiolytic gases (H₂, CO, CO₂ and CH₄) and liquid products (water-solute TOC and NH₄ ⁺). The weakly basic resin yielded lower amounts of H₂ and CO and higher amounts of CO₂ than those of the strongly basic resin. Moreover, the strong basic resin tended to yield greater amounts of NH₄ ⁺. Resins were characterized by the FTIR spectroscopy technique and the results showed that the resins structures are relatively stable.     

Identification of iron oxidation states in the products of interaction of Na<Subscript>2</Subscript>O<Subscript>2</Subscript> and Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> by Mössbauer absorption spectroscopy

The first stage of the solid-phase reaction of Na₂O₂ and Fe₂O₃ yields a tetravalent iron derivative. The product is unstable and disproportionates to form compounds with different oxidation states of iron. Analysis of their Mössbauer spectra was performed with the DISCVER program based on the Afanas’ev-Chuev method. At the early stage of analysis, the program identifies the maximal possible number of well-defined lines in the spectrum with a specified statistical quality and, thus, discerns a large number of known and unknown iron derivatives (phases) in samples of complex composition. Previously unknown highest oxidation states of iron from +5 to +8 were identified.     

Measurement of mineral solubilities in the ternary systems NaCl−ZnCl<Subscript>2</Subscript>−H<Subscript>2</Subscript>O and MgCl<Subscript>2</Subscript>−ZnCl<Subscript>2</Subscript>−H<Subscript>2</Subscript>O at 373 K

In this work, the solubilities of the salt minerals and the densities of solution in two ternary systems sodium chloride–zinc chloride–water and magnesium chloride–zinc chloride–water were measured at 373 K using an isothermal solution saturation method. Based on the determined equilibrium solubility data and the corresponding equilibrium solid phase, the phase diagrams and density diagrams of the two systems were plotted. The results show that the two ternary systems are complex and the eutectic points, the univariant solubility curves and the solid crystalline phase regions are shown and discussed. The phase diagram of the ternary system NaCl?ZnCl₂?H₂O at 373 K is constituted of two eutectic points, three univariant solubility curves and three solid crystalline phase regions corresponding to NaCl, ZnCl₂ and 2NaCl · ZnCl₂. And the phase diagram of the ternary system MgCl₂?ZnCl₂?H₂O at 373 K includes two eutectic points, three univariant solubility curves and three solid crystalline phase regions corresponding to MgCl₂ · 6H₂O, MgCl₂ · ZnCl₂ · 5H₂O and ZnCl₂. The experimental results were simply discussed.     

State of active components on the surface of the PdCl<Subscript>2</Subscript>-CuCl<Subscript>2</Subscript>/γ-Al<Subscript>2</Subscript>O<Subscript>3</Subscript> catalyst for the low-temperature oxidation of carbon monoxide

The state of the active constituents of the freshly prepared PdCl₂-CuCl₂/γ-Al₂O₃ catalyst for the low-temperature oxidation of the carbon monoxide by molecular oxygen was studied by X-ray absorption spectroscopy (XAS), powder X-ray diffraction (XRD), scanning electron microscopy (SEM), and diffuse reflectance IR Fourier transform spectroscopy (DRIFTS). It was shown that copper in the form of a crystalline phase of Cu₂Cl(OH)₃ with the structure of the mineral paratacamite and palladium chloride in an amorphous state occurred on the surface of γ-Al₂O₃. According to XAS data, the local environment of palladium consisted of four chlorine atoms, which formed a flat square with an increased distance between palladium and one of the chlorine atoms. The evolution of the local environments of copper and palladium upon a transition from the initial salts to the impregnating solutions and chlorides on the surface of γ-Al₂O₃ was considered. The role of γ-Al₂O₃ in the formation of the Cu₂Cl(OH)₃ phase was discussed. It was found by the DRIFTS method that linear (2114 cm⁻¹) and bridging (1990 and 1928 cm⁻¹) forms of coordinated carbon monoxide were formed upon the adsorption of CO on the catalyst surface. The formation of CO₂ upon the interaction of coordinated CO with atmospheric oxygen was detected. Active sites including copper and palladium were absent from the surface of the freshly prepared catalyst.     

Influence of pH and microwave calcination on the morphology of KGd(WO<Subscript>4</Subscript>)<Subscript>2</Subscript> particles derived by Pechini Sol–Gel method

KGd(WO₄)₂ (KGW) particles were synthesized at 3.5, 5.5 and 7.5 pH values by Pechini polymeric complex sol–gel method using potassium nitrate, gadolinium nitrate, ammonium paratungstate, citric acid and ethylene glycol as starting materials. Deionized water was used as solvent. Polymeric precursor gel was formed with citric acid as complexing agent and ethylene glycol as binder. Synthesized gel was analyzed by FT-IR spectroscopy. Prepared precursor gels were further annealed using resistive and microwave processes at 550 and 700 °C, respectively. The properties of heat treated samples were characterized by powder XRD, FT-IR, Raman and SEM analysis to understand the crystallinity, organic liberation, tungstate ribbon formation and surface morphology, respectively. The phase formation and different phases of intermediate oxides in pre-fired samples were investigated by powder XRD. Organic liberation in the samples in relation to temperature, and the carbon content in the pre-fired powder was analyzed using FT-IR spectrum. Raman spectrum reveals the formation of tungsten ribbons as well as the quality of the samples. The morphological changes at different synthesis conditions were observed with SEM micrographs.     

Photochemical replacement of benzene in the tetramethylcyclopentadienyl complex of iron, [η-C<Subscript>5</Subscript>Me<Subscript>4</Subscript>H)Fe(η-C<Subscript>6</Subscript>H<Subscript>6</Subscript>)]<Superscript>+</Superscript>

Irradiation of the cation [η-C₅Me₄H)Fe(η-C₆H₆)]⁺+ (1) and Bu^tNC with visible light in acetonitrile results in the displacement of the benzene ligand, giving [(η-C₅Me₄H)Fe(Bu^tNC)₃]+ (2). Reactions of complex 1 with P(OR)₃ and dppe in M_eCN yield the complexes [(η-C₅Me₄H)-Fe(M_eCN)P(OR)_{3 2}]+ (R = Me (3) and Et (4)) and [(η-C₅Me₄H)Fe(MeCN)(dppe)]+ (5) containing two Fe—P bonds. The same reactions in CH₂Cl₂ give the tris(phosphite) complexes [(η-C₅Me₄H)FeP(OR)_{3 3}]+ (6, 7). A photochemical reaction of complex 1 with pentaphos-phaferrocene Cp*Fe(η-cyclo-P₅) yields the triple-decker cation [(η-C₅Me₄H)Fe(μ-η:η-cyclo-P₅)FeCp*]+ (8) with a bridging pentaphospholyl ligand. Structures [2]PF₆ and [3]PF₆ were identified by X-ray diffraction.     

Influence of the temperature and cation nature on the EPR spectra of salts with the [Ni<Superscript>III</Superscript>(η<Superscript>5</Superscript>-1,2-B<Subscript>9</Subscript>C<Subscript>2</Subscript>H<Subscript>11</Subscript>)<Subscript>2</Subscript>]- anion

The influence of specific features of the structure and nature of the cations (Ph₄P⁺, H(Phen)⁺, Cs⁺, and (CH₃)₄N⁺) on the ERP spectra of the nickel ions in salts with the dicarbollylnickelate anion [Ni(B₉C₂H₁₁)₂]⁻ is studied. It is shown that the change in the cation type in these compounds results in the electron density redistribution, which affects the change in the main and average values of the g factor. The g _av value increases over that observed in frozen solutions upon the localization of the positive charge of the cation on one atom and in the absence of the screening effect of the solvent and large functional groups of the cation. The exception is the compound (Ph₄P⁺)NiCb₂⁻ (Cb is B₉C₂H₁₁) with solvated CCl₄ molecules. For all compounds studied, the temperature dependence of the linewidths in the EPR spectra is described by the equation ΔH = αT + βT⁷ with different α and β values and is defined by the temperature dependence of the relaxation process caused by the Raman interaction.     

Effect of ZrO<Subscript>2</Subscript> on Catalyst Structure and Catalytic Sulfur-Resistant Methanation Performance of MoO<Subscript>3</Subscript>/ZrO<Subscript>2</Subscript>–Al<Subscript>2</Subscript>O<Subscript>3</Subscript> Catalysts

A series of MoO₃/ZrO₂–Al₂O₃ catalysts was prepared and investigated in the sulfur-resistant methanation aimed at production of synthetic natural gas. Different methods including impregnation, deposition precipitation, and co-precipitation were used for preparing ZrO₂–Al₂O₃ composite supports. These composite supports and their corresponding Mo-based catalysts were investigated in the sulfur-resistant methanation, and characterized by N₂ adsorption–desorption, XRD and H₂-TPR. The results indicated that adding ZrO₂ promoted MoO3dispersion and decreased the interaction between Mo species and support in the MoO₃/ZrO₂–Al₂O₃ catalysts. The co-precipitation method was favorable for obtaining smaller ZrO₂ particle size and improving textural properties of support, such as better MoO₃ dispersion and increased concentration of Mo⁶⁺ species in octahedral coordination to oxygen. It was found that the MoO₃/ZrO₂–Al₂O₃ catalyst with ZrO₂Al₂O₃ composite support prepared by co-precipitation method exhibited the best catalytic activity. The ZrO₂ content in the ZrO₂Al₂O₃ composite support was further optimized. The MoO₃/ZrO₂–Al₂O₃ with 15 wt % ZrO₂ loading exhibited the highest sulfur-resistant CO methanation activity, and excess ZrO₂ reduced the specific surface area and enhanced the interaction between Mo species and support. The N₂ adsorption-desorption results indicated that the presence of ZrO₂ in excessive amounts decreased the specific surface area since some amounts of ZrO₂ form aggregates on the surface of the support. The XRD and H₂-TPR results showed that with the increasing ZrO₂ content, ZrO₂ particle size increased. These led to the formation of coordinated tetrahedrally Mo⁶⁺(T) species and crystalline MoO₃, and this development was unfavorable for improving the sulfur-resistant methanation performance of MoO₃/ZrO₂–Al₂O₃ catalyst.     

Kinetics and mechanism of the low-temperature oxidation of carbon monoxide with oxygen on a PdCl<Subscript>2</Subscript>–CuCl<Subscript>2</Subscript>/γ-Al<Subscript>2</Subscript>O<Subscript>3</Subscript> catalyst

A systematic study of the kinetics of the low-temperature oxidation of carbon monoxide with oxygen on a PdCl₂–CuCl₂/γ-Al₂O₃ supported catalyst was carried out over a wide range of the partial pressures of oxygen, water, and CO in order to test hypotheses on the reaction mechanism. It was shown that, as the temperature was increased from 20 to 38°C, rate of formation of CO₂ decreased and the apparent activation energy was about–40 kJ/mol. The hypotheses of different degrees of complexity concerning the reaction mechanism were formulated based on physicochemical data and a Langmuir–Hinshelwood model. Mechanisms in which carbon dioxide is formed on the interaction of the surface Pd(I) and Pd(II) complexes that include carbon monoxide and water with the surface complex of Cu(I) that coordinates oxygen were recognized as the most probable.     

Supported MgO–V<Subscript>2</Subscript>O<Subscript>5</Subscript>/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> catalysts for oxidative propane dehydration: Effect of the molar Mg : V ratio on the phase composition and catalytic properties of samples

The physicochemical properties of V₂O₅/Al₂O₃ and MgO–V₂O₅/Al₂O₃ supported catalysts (Mg : V = 1 : 1, 2 : 1, and 3 : 2) obtained by consecutive impregnation of the support with solutions of vanadium and magnesium precursors are studied using a complex of mutually complementary methods (XRD, Raman spectroscopy, UV–Vis spectrometry, and TPR-H₂). The effect of the formation of surface magnesium vanadates of various composition and structure on the catalytic properties of the supported vanadium oxide catalysts in the oxidative dehydrogenation of propane is studied. The introduction of magnesium in the samples and an increase in its content, accompanied by a change in the structure of the surface vanadium oxide phases from polymeric VO₆/VO₅ species to surface metavanadate species, magnesium metavanadate, and further to magnesium divanadate, significantly affects their catalytic properties in the reaction of the oxidative dehydrogenation of propane to propylene.     

Synthesis and heat capacity of NdVO<Subscript>4</Subscript> in the temperature range of 384–859 K

Heat capacity of NdVO₄ was determined in the temperature range of 384–859 K using differential scanning calorimetry. The thermodynamic functions (H°(T)–H°(384 K), S°(T)–S°(384 K), and Φ°) of neodymium orthovanadate were calculated using the experimental C_p = f(T) values. The structure of NdVO₄ was studied at 298 and 973 K.     

Effect of sintering temperature on microstructure,electric and optical properties of Ce<Subscript>0.8</Subscript>Gd<Subscript>0.2</Subscript>O<Subscript>2−δ</Subscript> + 2 mol % TiO<Subscript>2</Subscript>

The effect of the sintering temperature of the Ce_0.8Gd_0.2O_2?δ + 2 mol % TiO₂ on its microstructure, electric, and optical properties was studied using the methods of x-ray spectroscopy, scanning electron microscopy (SEM), conductivity and ellipsometry. It is shown that the electrolyte lattice parameter decreases at an increase in the sintering temperature. The pattern of the sample surface obtained using the SEM method points to the dominating role of the sintering temperature in the formation of the electrolyte microstructure. Variation of optical properties as dependent on the synthesis temperature is also determined by the microstructure parameters of ceramics: presence of pores, formation of grain interfaces.