Analysis of Nitrofuran Residues in Animal Feed Using Liquid Chromatography and Photodiode-Array Detection

The analysis of four nitrofuran veterinary drugs, nitrofurantoin, furazolidone, furaltadone and nitrofurazone, was optimized using reversed-phase liquid chromatography with a monolithic column and photo-diode array detection. The antibiotics were extracted from animal feeds by heating with acetonitrile. The isocratic mobile phase consisted of a 8:92 (v/v) acetonitrile/phosphate buffer (pH 4.5) at a flow-rate of 1 mL min⁻¹. Peaks were identified by the retention characteristics and UV spectra. Detection limits in the water samples ranged between 0.21 and 0.27 μg L⁻¹, and in the feed samples between 2.1 and 2.7 μg kg⁻¹, depending on the nitrofuran. The procedure was applied to the control of nitrofuran residues in farm water for poultry and different animal feeds.     

Determination of momordicoside A in bitter melon by high-performance liquid chromatography after solid-phase extraction

Summary Momordicoside A has been determined by solid-phase extraction (SPE) on a Envi Carb cartridge (3 mL, 250mg) then high-performance liquid chromatography (HPLC) on a C₁₈ column (4.6 mm×250 mm, 5 μm particle) with acetonitrile-methanol-50mm potassium dihydrogen phosphate buffer, 25:20:60 (v/v), as mobile phase, at a flow rate of 0.8 mL min⁻¹, and UV detection at 208 nm. The analytical method was shown to be highly reproducible, with precision (asRSD) and accuracy (asRME)<10%, both intra-day and inter-day. Absolute recoveries were >90%. The method was applied to the determination of momordicoside A in various tissues from different varieties of bitter melon from different producing areas.     

Optimization of the composition and pH of the mobile phase used for separation and determination of a series of quinolone antibacterials regulated by the European Union

Summary To ensure the safety of human food the European Union (EU) has set tolerance levels for quinolone compounds in animal products, so screening and confirmatory analytical methods are required for monitoring of these drugs. In this work, the proportion of organic modifier and the pH of acetonitrile-water mixtures used as mobile phases were optimized for separation of a group of quinolones. Linear solvation energy relationship (LSER) formalism based on the single solvent polarity parameterE _T ^N was used to predict the chromatographic behaviour of the compounds as a function of the amount of acetonitrile in the mobile phase. Correlation between retention and the pH of aqueous-organic mobile phases has also been used to optimize mobile-phase pH. The optimized mobile phase was a linear gradient starting from 18∶82 (v/v) acetonitrileacetate + formate buffer, pH 2.5. Quality data were determined and were satisfactory. The method detection limit was approximately 10 ng mL⁻¹ for most of the quinolones studied. The proposed mobile phase is compatible with mass spectrometric detection of the substances.     

Determination and Pharmacokinetic Study of Calycosin-7-O-β-d-glucoside in Rat Plasma After Intravenous Administration of Aidi Lyophilizer

Aidi injection is a clinical medicine used in China for the treatment of cancer. Calycosin-7-O-β-d-glucoside is the main effective components of the formulas. In this study, a high performance liquid chromatographic (LC) method was developed to quantify calycosin-7-O-β-d-glucoside in rat plasma using a liquid–liquid extraction and ultraviolet (UV) absorbance detection. LC analysis was performed on a Diamonsil C₁₈ column (200 × 4.6 mm i.d., 5 μm particle size) with isocratic mobile phase consisting of acetonitrile–0.05% phosphoric acid (19.5:80.5, v/v) of a flow rate of 1.0 mL min⁻¹. The linear range was 0.11–17.6 μg mL⁻¹ and the low quantification limit was 0.11 μg mL⁻¹ (S/N = 10). The intra- and inter-day relative standard deviations (RSD) in the measurement of quality control (QC) samples 0.11, 0.22, 1.32 and 8.80 μg mL⁻¹ ranged from 4.1 to 6.3 and 4.3 to 6.2%, respectively. The accuracy was from −6.7 to 4.3% in terms of relative error (RE). Calycosin-7-O-β-d-glucoside was stable in storage at −20 °C for 2 weeks and stable after three freeze–thaw cycles in rat plasma. This method was validated for specificity, accuracy, precision and was successfully applied to pharmacokinetic study of calycosin-7-O-β-d-glucoside in rat plasma after intravenous administration of Aidi lyophilizer.     

Liquid chromatographic determination of erythromycins in fermentation broth

Summary A simple and sensitive isocratic LC method is described for the determination of erythromycins in fermentation broths. A simple technique utilizing acetone-methyl ethyl ketone, 1∶1, as extraction solvent was coupled with suitable chromatographic conditions—compounds were separated on a 250 mm×4.6 mm i.d., 5 μm, reversed-phase column at 65°C with acetonitrile-0.2m K₂HPO₄ pH7.0-water, 35:5:60 (v/v), as mobile phase at a flow rate of 1.0 mL min⁻¹. UV detection was performed at 215 nm. Separation of erythromycin F from polar components of the fermentation liquid was sufficient. Erythromycins A, B, C, D, and E, andN-desmethylerythromycin A were also separated, as were known decomposition products of erythromycin A and several unknown components. The method is suitable for monitoring the progress of erythromycin fermentation.     

Simple LC Method with Chemiluminescence Detection for Simultaneous Determination of Arbutin and l-Ascorbic Acid in Whitening Cosmetics

Simultaneous determination of arbutin (ART) and l-ascorbic acid (AA) by HPLC with chemiluminescence detection is proposed for the first time. This method is based on the CL reaction of acidic potassium permanganate with ART and AA in the presence of formaldehyde as enhancer. The separation was performed on a C₁₈ column with a 90:10 (v/v) mixture of 0.02 M phosphate buffer and methanol as mobile phase. The effects of several conditions on HPLC resolution and CL emission were studied systematically. The linear ranges were 0.5–50 and 1–200 μg mL⁻¹ for ART and AA, respectively. The detection limits were 0.2 and 0.3 μg mL⁻¹, respectively. The method was successfully applied to the determination of ART and AA in whitening cosmetics.     

Determination of Abamectin Residues in Avocados by Microwave-Assisted Extraction and HPLC with Fluorescence Detection

In this article a new analytical method for the confirmation and quantification of abamectin residues in avocados is described. The method allows a fast analysis of abamectin homologues using microwave assisted extraction (MAE), solid-phase extraction (SPE) and high-performance liquid chromatography (HPLC) with fluorescence (FL) detection using trifluoroacetic anhydride (TFAA) and N-methylimidazole (NMIM) as derivatizing agents. The mobile phase consisted of water, methanol and acetonitrile (5:47.5:47.5 v/v/v) and was pumped at a rate of 1.1 mL min⁻¹ (isocratic elution). Homogenized avocado samples were extracted once with 20 mL acetonitrile:water 4:1 (v/v) in a microwave oven for 26 min at 700 W with a maximum temperature of 80 °C. MAE operational parameters were optimized by means of an experimental design. Extracts were cleaned using C₁₈ SPE cartridges. Average recoveries of the method at four spiked levels (0.005, 0.01, 0.10 and 1.0 mg kg⁻¹) were found to be in the range 90–100% with good precision (RSD < 12%). The limits of detection (LODs) and quantification (LOQs) of the whole method were 0.001 and 0.003 mg kg⁻¹, respectively, which are lower than the maximum residue limit (MRL) established by the Spanish and the European legislation in avocados (0.01 mg kg⁻¹). Several avocado samples previously treated with the pesticide were also analyzed.     

Simple Liquid Chromatographic Determination of Minocycline in Brain and Plasma

A new high-performance liquid chromatography assay was developed for the determination of minocycline in plasma and brain. A solid–liquid extraction procedure was coupled with a reversed-phase HPLC system. The system requires a mobile phase consisting of acetonitrile:water:perchloric acid (26:74:0.25, v/v/v) adjusted to pH 2.5 with 5 M sodium hydroxide for elution through a RP8 column (250 × 3.0 mm, i.d.) with UV detection set at 350 nm. The method proved to be accurate, precise (RSD < 20%) and linear between 0.15–20 μg mL⁻¹ in plasma and 1–20 μg mg⁻¹ in brain. The method was successfully applied to a blood-brain barrier minocycline transport study.     

Simultaneous RP-LC Determination of Losartan Potassium, Ramipril, and Hydrochlorothiazide in Pharmaceutical Preparations

A simple, rapid, and precise reversed-phase high-performance liquid chromatographic method has been developed for simultaneous determination of losartan potassium, ramipril, and hydrochlorothiazide. The three drugs were separated on a 150 mm × 4.6 mm i.d., 5 μm particle, Cosmosil C₁₈ column. The mobile phase was 0.025 m sodium perchlorate–acetonitrile, 62:38 (v/v), containing 0.1% heptanesulphonic acid, pH adjusted to 2.85 with orthophosphoric acid, at a flow rate of 1.0 mL min⁻¹. UV detection was performed at 215 nm. The method was validated for linearity, accuracy, precision, and limit of quantitation. Linearity, accuracy, and precision were acceptable in the ranges 35–65 μg mL⁻¹ for losartan, 1.75–3.25 μg mL⁻¹ for ramipril, and 8.75–16.25 μg mL⁻¹ for hydrochlorothiazide.     

Determination of the Enantiomeric Purity of l-Carnitine and Acetyl-l-Carnitine by Chiral Liquid Chromatography

A chiral liquid chromatographic method for determination of the enantiomeric purity of both l-carnitine and acetyl-l-carnitine is described. Separation of the enantiomers of dl-carnitine and acetyl-dl-carnitine was achieved on a commercial chiral column (Chiralcel OD-R) after derivatization with (alpha-bromo)methyl phenyl ketone. Introduction of this lipophilic UV chromophoric group to the carnitine and acetylcarnitine molecules improved their retention, resolution, and UV detection. The mobile phase was 74:26 (v/v) 0.5 mol L^-1 sodium perchlorate–acetonitrile, pH 3.8, and the flow rate was 0.4 mL min^-1. Detection was performed at 235 nm. The method is selective and reliable for determination of the enantiomeric purity of bulk drug substances l-carnitine and acetyl-l-carnitine.     

Application of a Validated, Stability-Indicating LC Method to Stress Degradation Studies of Ramipril and Moexipril.HCl

A stability-indicating reversed-phase liquid chromatographic (RPLC) method has been established for analysis of ramipril (RAM) and moexipril hydrochloride (MOEX.HCl) in the presence of the degradation products generated in studies of forced decomposition. The drug substances were subjected to stress by hydrolysis (0.1 m NaOH and 0.1 m HCl), oxidation (30% H₂O₂), photolysis (254 nm), and thermal treatment (80 °C). The drugs were degraded under basic and acidic conditions and by thermal treatment but were stable under other stress conditions investigated. Successful separation of the drugs from the degradation products was achieved on a cyanopropyl column with 40:60 (v/v) aqueous 0.01 m ammonium acetate buffer (pH 6)–methanol as mobile phase at a flow rate of 1 mL min⁻¹. Detection was by UV absorption at 210 nm. Response was a linear function of concentration over the range 5–50 μg mL⁻¹ (r > 0.9995), with limits of detection and quantitation (LOD and LOQ) of 0.04 and 0.09 μg mL⁻¹, respectively, for RAM and 0.014 and 0.32 μg mL⁻¹, respectively, for moexipril. The method was validated for specificity, selectivity, solution stability, accuracy, and precision. Statistical analysis proved the method enabled reproducible and selective quantification of RAM and MOEX as the bulk drug and in pharmaceutical preparations. Because the method effectively separates the drugs from their degradation products, it can be used as stability-indicating.     

Analysis of Terbumeton and its Major Metabolites by SPE and DAD-HPLC in Soil Bulk Water

A rapid and inexpensive method for simultaneous quantification of terbumeton (TER), and its major potential metabolites (TED; terbumeton-desethyl, TOH; terbumeton-2-hydroxy and TID; terbumeton-deisopropyl) in soil bulk water (SBW) samples is proposed. The analytical method involves extraction–concentration from SBW samples using a graphitized carbon black (GCB) cartridge followed by their separation–detection by reversed-phase high-performance liquid chromatography analysis using a C₁₈ column and a diode array detector. A mobile phase of acetonitrile−0.005 mol L⁻¹ phosphate buffer (pH 7.0) (35:65, v/v) at a flow rate of 0.8 mL min⁻¹ in isocratic elution mode has been used. After optimization of the extraction and separation conditions, this method can be used for the simultaneous determination of investigated compounds in the range of the international limits of 0.1 μg L⁻¹. For TER the detection limit was 0.009 μg L⁻¹ and it was 0.100, 0.550, and 0.480 μg L⁻¹ for TED, TOH, and TID, respectively. The recoveries of TER, TED, TOH, and TID from SBW samples, measured at three levels of concentration range, were found to be between 48.0 and 102.0%. The intra-day precision measured by relative standard deviation (RSD) was always lower than 9.0%.     

A reversed-phase ion-interaction chromatographic method for in-vitro estimation of the percutaneous absorption of water-soluble UV filters

An analytical method based on ion-interaction chromatography with UV detection for simultaneous in-vitro estimation of the percutaneous absorption of the most used water-soluble UV filters in sunscreen cosmetics is proposed. These UV filters were phenylbenzimidazole sulfonic acid, disodium phenyl dibenzimidazole tetrasulfonate, benzophenone-4, and terephthalylidene dicamphor sulfonic acid. The methodology is based on applying the sunscreen containing the target UV filters to human epidermis in a diffusion cell. Analytes are determined in the receptor solution. To ensure skin integrity, screening of the cells was carried out by analytical determination of a marker. Analytical variables such as percentage ethanol, concentration of ion-pairing agent, pH of the mobile phase, and temperature were studied in order to achieve high resolution of the chromatographic peaks in the lowest possible time of analysis. The conditions selected consisted of a mobile phase composed of 35:65 (v/v) ethanol–ammonium acetate buffer solution (pH 4, containing 50 mmol L⁻¹ tetra-n-butylammonium bromide). The chromatographic determination was carried out with the analytical column at 50 °C. UV detection was carried out at the maximum absorption wavelength for each analyte. The limit of detection (3s _y/x /b) ranged from 16 to 65 ng mL⁻¹, depending on the analyte.     

Development and Validation of an HPLC Method for Determination of Ceftiofur Sodium

An isocratic high-performance liquid chromatographic method has been developed for assay of ceftiofur sodium in drug substance and in sterile powder for injection. Chromatography was performed on a 250 mm × 4.6 mm, 5 μm particle, C₁₈ column with a 78:22 (v/v) mixture of 0.02 m disodium hydrogen phosphate buffer (pH adjusted to 6.0 with 85% orthophosphoric acid) and acetonitrile as mobile phase, at a flow rate of 1.0 mL min⁻¹. The separation was monitored by UV detection at 292 nm. Validation of the method for linearity and range, intra- and inter-day precision, accuracy, specificity, recovery, robustness, and limits of quantification and detection yielded good results. The calibration plot was linear from 20.0–120.0 μg mL⁻¹ and the correlation coefficient was 0.9999. It was shown that ceftiofur was degraded under acidic, alkaline, oxidative, and photolytic conditions. The method was found to be stability-indicating and could be used for routine analysis of ceftiofur sodium for injection.     

LC and SPE Determination of Chlorophacinone in Corn Grains, Soil and Rat Plasma

A liquid chromatographic method was used for the analysis of chlorophacinone in corn, soil and rat plasma. Sample preparation differed from corn, soil and serum. Simple liquid extraction procedures were applied to soil and corn; solid phase extraction using Oasis HLB cartridges and easy protocol was used for plasma. Liquid chromatography was on X-terra C18 column. The mobile phase used did not contain ion-pairing reagent, it was constituted with methanol/ammonium bicarbonate (0.01 M, pH = 7), 70/30, v/v at 1 mL min⁻¹. UV detection was by using photodiode detector operating at 282 nm. Complete validation of the proposed procedure for corn, soil and serum was made.     

Validated Enantioselective LC Method, with Precolumn Derivatization with Marfey’s Reagent, for Analysis of the Antiepileptic Drug Pregabalin in Bulk Drug Samples

An enantioselective high-performance liquid chromatographic method, with precolumn derivatization with Marfey’s chiral reagent, sodium 2,4-dinitro-5-fluorophenyl-l-alanine amide, has been developed for resolution of the enantiomers of a new antiepileptic drug, pregabalin, in the bulk drug. The diastereomers of the pregabalin enantiomers were resolved to baseline on a reversed-phase ODS column with a 60:40 (v/v) mixture of aqueous 0.2% triethylamine (pH adjusted to 3.5 with dilute orthophosphoric acid) and acetonitrile as mobile phase. Resolution between the diastereomers was not less than five. The method was extensively validated and proved to be robust. The calibration plot was indicative of an excellent linear relationship between response and concentration over the range 750 (LOQ) to 7,500 ng L⁻¹ for the R enantiomer. The limits of detection and quantification of the R enantiomer were 250 and 750 ng L⁻¹, respectively, for an injection volume of 10 μL. Recovery of the R enantiomer from bulk drug samples of pregabalin ranged from 97.5 to 101.76%. Solutions of pregabalin in water and in the mobile phase were found to be stable for at least 48 h. The method was found to be suitable and accurate for quantitative determination of the R enantiomer in the bulk drug. It can be also used to test the stability of samples of pregabalin.     

Capillary zone electrophoretic determination of tosufloxacin and trovafloxacin in urine

Summary A simple and rapid capillary zone electrophoretic method with UV detection has been developed for determination of tosufloxacin and trovafloxacin. The separation was performed in fused-silica capillaries (57 cm length × 75μm i.d.); the running buffer was 35mm borate + 35mm phosphate buffer solution, pH 8.6, containing 6% (v/v) acetonitrile. The applied potential was 15 kV, the temperature 30°C, and detection was at 262 nm. Piromidic acid was used as the internal standard. Response was linearly dependent on concentration in the range 1.0–120.0 μg mL⁻¹ and the detection limit was 0.2 μg mL⁻¹ for both compounds. The analysis was highly reproducible (RSD between 3.41 and 1.25%). The method was applied to the determination of tosufloxacin and trovafloxacin in human and rat urine. The method was validated by using HPLC as a reference method. Recovery was between 96.8 and 102%.     

LC-MS-MS Determination of Cyclo{(2S)-2-amino-8-[(aminocarbonyl)hydrazono] decanoyl-1-l-tryptophyl-l-isoleucyl-(2R)-2-piperidinecarbonyl} a Novel Histone Deacetylase Inhibitor in Rat Serum

A rapid and sensitive liquid chromatography-tandem mass spectrometry assay was developed for the determination of a novel histone deacetylase inhibitor, cyclo{(2S)-2-amino-8-[(aminocarbonyl)hydrazono]decanoyl-1-l-tryptophyl-l-isoleucyl-(2R)-2-piperidinecarbonyl} (SD-2007), in rat serum. The mobile phase consisted of acetonitrile and ammonium formate (10 mM) (85:15 v/v), and the flow rate was 0.25 mL min⁻¹. Chromatographic separations were achieved by isocratic elution on a C₁₈ column. Multiple reaction monitoring was based on the transition of m/z = 681.8 → 83.6 for SD-2007 and 372.1 → 176.1 for trazodone (internal standard). A linearity was observed over a concentration range from 2 to 1,000 ng mL⁻¹ (r ² > 0.999), with the lower limit of quantification at 2 ng mL⁻¹ with 100 μL of rat serum. The mean intra- and inter-day assay accuracy ranged from 98.5–109.7% to 95.2–102.7%, respectively, and the mean intra- and inter-day precision was between 4.3–11.3% and 2.9–13.3%. The developed assay was applied to a pharmacokinetic study of SD-2007 in rats after intravenous injection (dose 4 mg kg⁻¹).     

LC–ESI–MS for Rapid and Sensitive Determination of Aripiprazole in Human Plasma

A rapid, sensitive, and accurate high-performance liquid-chromatographic–mass spectrometric (HPLC–MS) method, with estazolam as internal standard, has been developed and validated for determination of aripiprazole in human plasma. After liquid–liquid extraction the compound was analyzed by HPLC on a C₁₈ column, with acetonitrile—30 mm ammonium acetate containing 0.1% formic acid, 58:42 (v/v), as mobile phase, coupled with electrospray ionization mass spectrometry (ESI-MS). The protonated analyte was quantified by selected-ion recording (SIR) with a quadrupole mass spectrometer in positive-ion mode. Calibration plots were linear over the concentration range 19.9–1119.6 ng mL⁻¹. Intra-day and inter-day precision (CV%) and accuracy (RE%) for quality-control samples (37.3, 124.4, and 622.0 ng mL⁻¹) ranged between 2.5 and 9.0% and between 1.3 and 3.5%, respectively. Extraction recovery of aripiprazole from plasma was in the range 75.8–84.1%. The method enables rapid, sensitive, precise, and accurate measurement of the concentration of aripiprazole in human plasma.     

Simplified liquid-chromatographic determination of residues of tetracycline antibiotics in eggs

Summary A high-performance liquid chromatographic (HPLC) procedure is described for the identification and quantification of residues of tetracycline antibiotics (TCA) (oxytetracycline, tetracycline, chlortetracycline, and doxycycline), in eggs. Spiked and blank samples were prepared by homogenization with 1∶1 (v/v) acetonitrile-mixed Mcllvaine buffer and EDTA solution (pH 4.0) then centrifugal ultrafiltration. HPLC was performed on a reversed-phase column with acetonitrile-5% (v/v) aqueous acetic acid, 35∶65 (v/v), as mobile phase and photo-diode array detection. Average recoveries (each drug spiked at 0.1, 0.2, 0.3, 0.5 and 1.0 μg g⁻¹) were >-77% with standard deviations (SD) between 1.5 and 3.5%. The inter-assay variabilities and theirSD were <3.4% and <0.7%, respectively, and intra-assay variability was between 2.0 and 3.9%. The limits of quantitation (LOQ) were 0.064 0.087, 0.121, and 0.131 μg g⁻¹ for OTC, TC, CTC, and DC, respectively. The total time required for the analysis of one sample was less than 30 min.