Structural investigations of laser-deposited Fe/Al multilayers

Fe/Al multilayers are prepared by crossed-beam pulsed laser deposition and investigated by Rutherford backscattering, conversion electron M?ssbauer spectroscopy, and transmission electron microscopy. The results are compared to purely ballistic simulations of the deposition process using the TRIDYN4.0 code. It is found that the intermixing of adjacent layers must be described in terms of ballistic mixing followed by chemical mixing. The phase formation in the transition layer between adjacent layers follows the non-equilibrium behavior of Fe/Al in analogy to investigations on mechanically alloyed and ion-beam-mixed Fe/Al. In Fe-rich areas a bcc solid solution is formed. In Al-rich environment an amorphous phase is observed. Received: 13 January 1999 / Accepted: 14 January 1999 / Published online: 7 April 1999     

X-ray photoelectron spectroscopy study of magnetic films

Ta/NiO_x/Ni₈₁Fe₁₉/Ta films were prepared by rf reactive and dc magnetron sputtering. The exchange coupling field H_ex and the coercivity H_c of NiO_x/Ni₈₁Fe₁₉ as a function of the ratio of Ar to O₂ during the deposition process were studied. The composition and the chemical states in the interface region of NiO_x/NiFe were also investigated using X-ray photoelectron spectroscopy (XPS) and the peak decomposition technique. The results show that the ratio of Ar to O₂ has a great effect on the chemical states of nickel in NiO_x films. The exchange coupling field H_ex and the coercivity H_c of Ta/NiO_x/Ni₈₁Fe₁₉/Ta are thus seriously affected. XPS is shown to be a powerful tool for characterizing magnetic films. Received: 18 July 2001 / Accepted: 21 December 2001 / Published online: 3 June 2002 RID="*" ID="*"Corresponding author. Fax: +86-010/6232-7283, E-mail: guanghua_yu@263.net     

Spectroscopy in our age

The development of modern spectroscopy is summarized from Bunsen’s detection of atoms as the beginning of spectral analysis to modern molecular spectroscopies including new high resolution techniques for molecular ions. Recent experiments involving long range charge migration in peptides and proteins are outlined. Received: 2 October 2000 / Published online: 11 October 2000     

XPS and AES investigations of hard magnetic Nd-Fe-B films

Nd-Fe-B is a promising material system for the preparation of thin films with good hard magnetic properties. One problem of this material class is the sensitivity against oxidation, resulting in a degradation of the magnetic properties. Using XPS depth profiling in combination with peak-shape analysis it is shown that already after several hours oxygen can diffuse deep into the thin laser-deposited films and that Nd is mainly responsible for the oxidation. Local element analysis with AES revealed boron inhomogeneities from droplet formation during laser deposition. These problems can be solved by using a capping Cr layer and an FeB target for thin film preparation, respectively.     

Characterization of thin Ta-Si-Nx layers of different nitrogen content using XPS, UPS and STM

Reactively sputtered Ta-Si-N_x barrier systems of different nitrogen content on copper were investigated by photoelectron spectroscopy (XPS, UPS) and scanning tunnelling microscopy (STM). The measured photoelectron spectra (excitation He-I) showed a clear dependence of the electron state density near the Fermi edge on the content of nitrogen. These results correlate with the I(U) characteristics of the STM measurements and the electrical conductivity of these layers.     

XPS surface analysis of monocrystalline silicon solar cells for manufacturing control

X-ray photoelectron spectroscopy (XPS) has been applied to surfaces of silicon wafers in the different stages of the assembly line for large-scale monocrystalline silicon solar cell manufacturing (ISOFOTON, Malaga, Spain). XPS results have shown that a considerable amount of carbon is present on the pyramidal-textured monocrystalline silicon surface. This amount decreases slightly but is still present after the process of phosphor diffusion (p-n junction), as well as after subsequent calcination in humid air for SiO₂ film formation (passivation). This amount of carbon may be buried during the process of CVD coating an anti-reflection TiO₂ film. After calcination of the film in order to obtain the TiO₂ rutile phase, an even higher amount of carbon is detected on the TiO₂ anti-reflection coating surface. This indicates that not all organics from the tetra-isopropile ortho-titanate (TPT) precursor were released from the film. Furthermore, in this case phosphor is found in excess on the SiO₂ wafer surface (dead layer) and also on the rutile TiO₂ surface, indicating that an extra phosphor diffusion from the bulk silicon through the TiO₂ film has taken place during calcination. These results demonstrate how thermal treatments applied in the solar cell manufacturing assembly line can influence and may change the intended compositional distribution. These treatments may also introduce defects that act as recombination centres for charge carriers in the solar cell device. Received: 13 September 2000 / Accepted: 10 January 2001 / Published online: 3 May 2001     

XPS depth profiling studies of L-CVD SnO2 thin films

In this paper we present the results of the XPS atomic depth profile analysis, using ion beam sputtering, of L-CVD SnO₂ thin films grown on an atomically clean SiO₂ substrate after annealing at 400 °C in dry atmospheric air. From the evolution of the Sn 3d_5/2, O 1s, Si 2p and C 1s core level peaks our experiments allowed the determination of the in depth atomic concentration of the main components of the SnO₂/SiO₂ interface. Thin (few nm) nearly stoichiometric SnO₂ films are present at the topmost layer of the thin films, and progressive intermixing with SnO and silicon oxide is observed at deeper layer. The interface between the Sn and the Si oxide layers (i.e. the effective Sn oxide thickness) is measured at 13 nm.     

Fabrication of atomic gratings based on self-organization of adsorbates with repulsive interaction

Received: 5 May 1997/Accepted: 6 May 1997     

Atomic force microscopy study of lymphoblastoid cells under 50-Hz 2-mT magnetic field irradiation

Received: 18 December 1997/Accepted: 5 January 1998     

Scanning tunneling microscopy on self-assembled calix[4]resorcinarene monolayer adsorbates on Au(111)

Self-assembled Monolayers of calix[4]resorcinarene receptor molecules on Au(111) were studied by UHV scanning tunneling microscopy and X-ray photoelectron spectroscopy. Highly ordered monolayers were observed with domains oriented at an angle of 60° relative to each other. Molecularly resolved images were investigated and lattice constants found which depended on the preparation solvent. The STM images of two samples, one prepared in 1 mM chloroform/ethyl alcohol adsorbate solution and one in 1 mM hexane adsorbate solution are consistent with having a ×2 and 4×2 lattice, respectively. Received: 22 September 1999 / Accepted: 28 March 2000 / Published online: 11 May 2000     

Evaluation of carbon films electrodeposited on different substrates from different organic solvents

Diamond-like-carbon (DLC) films have been deposited on Si, aluminum and indium tin oxide-coated glass from several organic solvents with pulse-modulated power. The films are characterized by X-ray photoelectron spectroscopy (XPS) and Raman spectroscopy. XPS spectra show that the main composition of the films is carbon and Raman spectra show that the films are typical DLC films and a high potential is preferable in the formation of sp ³-structure carbon. Comparing the results from different solvents and different substrates we deduce that the methyl group of the solvents has a critical function in forming the DLC films. However, the formation process and the characters of the films, such as appearance, resistivity and thickness, are mainly determined by the substrate. We may call this deposition a substrate-controlled reaction. Received: 31 May 2000 / Accepted: 9 January 2001 / Published online: 3 April 2001     

An XPS study of CrOx on a thin alumina film and in alumina supported catalysts

We have investigated chromium layers evaporated onto a thin alumina film at room temperature. The oxidation and reduction behavior of this model catalyst was compared to atomic layer deposition (ALD) and impregnated alumina supported catalysts using X-ray photoelectron spectroscopy (XPS) with a detailed analysis method utilizing asymmetric peak shapes to represent both metallic and oxidic states. The ALD and impregnated catalysts were measured after calcination in air and after reduction with several gases at 850 K. Both catalysts show Cr³⁺ and Cr⁶⁺ species after calcination and mostly Cr³⁺ after reduction. The chromium layers deposited in vacuum show initially small partial oxidation due to the interaction with the oxygen terminated alumina film. These model catalysts can be oxidized in vacuum to Cr³⁺ species but not to higher oxidation states. The model catalysts were also subjected to calcination and reduction treatments after deposition in vacuum. Under these conditions the model systems exhibit similar oxidation/reduction behavior as the supported catalysts. Photoreduction of Cr⁶⁺ during the measurements was also studied and found to be very slow having a negligible effect on the results.     

Characterization of laser-ablated and chemically reduced silver colloids in aqueous solution by UV/VIS spectroscopy and STM/SEM microscopy

Silver colloids in aqueous solution were studied by different scanning microscopy techniques and UV/VIS spectroscopy. The silver colloids were produced either by chemical reduction or by nanosecond laser ablation from a solid silver foil in water. Variation of laser power and ablation time leads to solutions of metal clusters of different sizes in water. We characterized the electronic absorption of the clusters by UV/VIS spectroscopy. STM (scanning tunneling microscope) imaging of the metal colloids shows atomic resolution of rod- or tenon-like silver clusters up to 10-nm length formed by laser ablation. Our scanning electron microscope measurements, however, show that much larger silver colloids up to 5-μm length are also formed, which are not visible in the STM due to their roughness. We correlate them with the long-wavelength tail of the multimodal UV/VIS spectrum. The silver colloids obtained by chemical reduction are generally larger and their electronic spectra are red-shifted compared to the laser-ablated clusters. Irradiation of the colloid solution with nanosecond laser pulses of appropriate fluence at 532 nm and 355 nm initially reduced the colloid size. Longer irradiation at 355 nm, however, leads to the formation of larger colloids again. There seems to be a critical lower particle size, where silver clusters in aqueous solution become unstable and start to coagulate. Received: 24 June 2002 / Revised version: 25 July 2002 / Published online: 25 October 2002 RID="*" ID="*"This work is part of the thesis of H. M?ltgen RID="**" ID="**"Corresponding author. Fax: +49-211/811-5195, E-mail: kleinermanns@uni-duesseldorf.de     

A combined SNMS and EFTEM/EELS study on focused ion beam prepared vanadium nitride thin films

We investigated the diffusion profiles and core-loss fine-structures (ELNES) of thin vanadium nitride films by electron energy-loss spectroscopy (EELS) and energy filtering transmission electron microscopy (EFTEM). The nitride layers have been produced by rapid thermal processing in a NH₃ or N₂ atmosphere and have then been cross-sectioned with a focused ion beam instrument (FIB) under mild milling conditions to maintain crystallography. For the high-resolution electron energy-loss spectroscopy studies (HREELS), a recently developed TEM gun monochromator, implemented into a 200 kV field emission gun column was used in combination with a new post-column spectrometer. It was found that, dependent on substrate and atmosphere, layers with different vanadium and nitrogen content were formed, showing distinct differences in their ELNES. With an energy resolution at the 0.2 eV level and a TEM beam spot size of approximately 2 nm these layers could be unambiguously identified when compared to theoretical ELNES simulations from the literature.     

Thickness-dependent magnetic domain structures of ultrathin Co/Au(111) films studied by means of magnetic force microscopy in ultrahigh vacuum

Received: 10 December 1997/Accepted: 11 December 1997     

Formation of GaAs1−xNx nanofilm on GaAs by low energy N2 implantation

Nitridation of GaAs (1 0 0) by N₂⁺ ions with energy E_i = 2500 eV has been studied by Auger- and Electron Energy Loss Spectroscopy under experimental conditions, when electrons ejected only by nitrated layer, without contribution of GaAs substrate, were collected. Diagnostics for quantitative chemical analysis of the nitrated layers has been developed using the values of NKVV Auger energies in GaN and GaAsN chemical phases measured in one experiment, with the accuracy being sufficient for separating their contributions into the experimental spectrum. The conducted analysis has shown that nanofilm with the thickness of about 4 nm was fabricated, consisting mainly of dilute alloy GaAs_1−xN_x with high concentration of nitrogen x ∼ 0.09, although the major part of the implanted nitrogen atoms are contained in GaN inclusions. It was assumed that secondary ion cascades generated by implanted ions play an important role in forming nitrogen-rich alloy.     

Structural and magnetic properties of Co-C composite films and Co/C multilayer films

CoC composite films and Co/C multilayer films have been prepared by a method incorporating ion beam sputtering and plasma chemical vapor deposition. It has been found that the structure and magnetic properties of both the Co-C composite and the Co/C multilayer films depend strongly on the substrate temperature during deposition. The Co-C composite film deposited at room temperature is amorphous, with relatively low saturation magnetization and coercivity. On the other hand, the film deposited at 250 °C is composed of fine Co crystallites separated by amorphous C or Co-C phase. As a result, both the saturation magnetization and coercivity are increased compared with the film deposited at room temperature. When deposited at room temperature, the Co/C multilayer film exhibits good periodicity, with a period of 70 nm (Co: 40 nm, C: 30 nm) and sharp and flat Co-C interfaces. High magnetization (602 emu/cm³) and low coercivity (1.6 Oe) are obtained for such a film. However, increasing the substrate temperature to 250 °C was found to be detrimental to the magnetic properties due to the formation of cobalt carbide at the Co-C interface. Received: 11 July 2000 / Accepted: 13 July 2000 / Published online: 30 November 2000     

Synthesis and characterization of ZnS nanoparticles in water/AOT/n-heptane microemulsions

ZnS nanoparticles were synthetized using water-containing AOT reversed micelles as nanoreactors and characterized by UV-Vis spectrophotometry, HRTEM (high-resolution transmission electron microscopy), SAED (selected-area electron diffraction), and digital image processing. The experimental data evidence a slow growing process of fractal-like ZnS nanoparticles’ coupled with a change of their photophysical properties. Both these processes are well described by power laws. The nanoparticles size is mainly controlled by the micellar size. After evaporation of the organic solvent, it has been found that the deposit is constituted by smaller and more stable ZnS nanoparticles bathed in a surfactant matrix. Received: 20 April 1999 / Accepted: 23 April 1999 / Published online: 8 September 1999     

XPS and ToF-SIMS analysis of natural rubies and sapphires heated in an inert (N2) atmosphere

Advanced surface analysis techniques: X-ray photoelectron spectroscopy and time-of-flight secondary ion mass spectrometry, have been employed in the study of heat treatment of natural corundum as ruby and sapphire. The stones were heat treated in an inert (N₂) atmosphere. The setting temperatures were: 1000, 1100, 1200, 1300, 1400, 1500 and 1600 °C. The XPS studies and the parallel ToF-SIMS experiments revealed diffusion behavior of Fe and Ti in the as-mined stones as evidenced by surface observations. Both metals exhibited broad maxima in surface concentration near 1300 °C. Owing to its superlative detection limit, ToF-SIMS spectra are able to provide the temperature-dependent concentration profiles of trace transition metals such as Cr, Cu and V at a level not detectable by XPS. Visible appearance of the stones is clearly affected by heat treatment. Interestingly, the ruby stones did not exhibit cloudy inclusion (“silk”) on heating, contrary to previous experiments under atmospheric conditions.     

Role of pH and calcium ions in the adsorption of an alkyl N-aminodimethylphosphonate on steel: An XPS study

The role of pH and calcium ions in the adsorption of an alkyl N-aminodimethylphosphonate on mild steel (E24) surfaces was investigated by XPS. Fe 2p_3/2 and O 1s spectra show that the oxide/hydroxide layer developed on the steel surface, immersed in the diphosphonate solution (7 ≤ pH ≤ 13, without Ca²⁺) or in a filtered cement solution (pH 13, 15.38 mmol l⁻¹ of Ca²⁺), consists of Fe₂O₃, covered by a very thin layer of FeOOH (goethite). The total thickness of the oxide/hydroxide layer is ∼3 nm and is independent of the pH and the presence/absence of Ca²⁺. In the absence of Ca²⁺ ions, the N 1s and P 2p spectra reveal that the adsorption of the diphosphonate on the outer layer of FeOOH takes place only for pH lower than the zero charge pH of goethite (7.55). At pH 7, the adsorbed diphosphonate layer is continuous and its equivalent thickness is ∼24 Å (monolayer). In the presence of Ca²⁺ ions, the C 1s and Ca 2p signals indicate that calcium is present on the steel surface as calcium phosphonate (and Ca(OH)₂, in very small amount). The adsorption of the diphosphonate molecules on the steel surface is promoted in alkaline solution (pH > 7.55) by the doubly charged Ca²⁺ ions that bridge the O⁻ of goethite and the P-O⁻ groups of the diphosphonate molecules. The measured values for the Ca/P intensity ratio are in the range 0.75-1, which suggests that the diphosphonate molecules are adsorbed on steel forming a polymer cross-linked by calcium ions through their phosphono groups. In the presence of Ca²⁺ ions in alkaline solution, the adsorbed diphosphonate layer is discontinuous and the surface coverage is found to be ∼34%.