A nitridoniobium(V) reagent that effects acid chloride to organic nitrile conversion: synthesis via heterodinuclear (Nb/Mo) dinitrogen cleavage, mechanistic insights, and recycling

The transformation of acid chlorides (RC(O)Cl) to organic nitriles (RC[triple bond]N) by the terminal niobium nitride anion [N[triple bond]Nb(N[Np]Ar)3]- ([1a-N]-, where Np = neopentyl and Ar = 3,5-Me2C6H3) via isovalent N for O(Cl) metathetical exchange is presented. Nitrido anion [1a-N]- is obtained in a heterodinuclear N2 scission reaction employing the molybdenum trisamide system, Mo(N[R]Ar)3 (R = t-Bu, 2a; R = Np, 2b), as a reaction partner. Reductive scission of the heterodinuclear bridging N2 complexes, (Ar[R]N)3Mo-(mu-N2)Nb(N[Np]Ar)3 (R = t-Bu, 3b; R = Np, 3c) with sodium amalgam provides 1 equiv each of the salt Na[1a-N] and neutral N[triple bond]Mo(N[R]Ar)3 (R = t-Bu, 2a-N; R = Np, 2b-N). Separation of 2-N from Na[1a-N] is readily achieved. Treatment of salt Na[1a-N] with acid chloride substrates in tetrahydrofuran (THF) furnishes the corresponding organic nitriles concomitant with the formation of NaCl and the oxo niobium complex O[triple bond]Nb(N[Np]Ar)3 (1a-O). Utilization of 15N-labeled 15N2 gas in this chemistry affords a series of 15N-labeled organic nitriles establishing the utility of anion [1a-N]- as a reagent for the 15N-labeling of organic molecules. Synthetic and computational studies on model niobium systems provide evidence for the intermediacy of both a linear acylimido and niobacyclobutene species along the pathway to organic nitrile formation. High-yield recycling of oxo 1a-O to a niobium triflate complex appropriate for heterodinuclear N2 scission has been developed. Specifically, addition of triflic anhydride (Tf2O, where Tf = SO2CF3) to an Et2O solution of 1a-O provides the bistriflate complex, Nb(OTf)2(N[Np]Ar)3 (1a-(OTf)2), in near quantitative yield. One-electron reduction of 1a-(OTf)2 with either cobaltocene (Cp2Co) or Mg(THF)3(anthracene) provided the monotriflato complex, Nb(OTf)(N[Np]Ar)3 (1a-(OTf)), which efficiently regenerates complexes 3b and 3c when treated with the molybdenum dinitrogen anions [N2Mo(N[t-Bu]Ar)3]- ([2a-N2]-) or [N2Mo(N[Np]Ar)3]- ([2b-N2]-), respectively.     

P2 addition to terminal phosphide M[triple bond]P triple bonds: a rational synthesis of cyclo-P3 complexes

The diphosphaazide complex (Mes*NPP)Nb(N[Np]Ar)3 (Mes* = 2,4,6-tri-tert-butylphenyl, Np = neopentyl, Ar = 3,5-Me2C6H3), 1, has previously been reported to lose the P2 unit upon gentle heating, to form (Mes*N)Nb(N[Np]Ar)3, 2. The first-order activation parameters for this process have been estimated here using an Eyring analysis to have the values Delta H(double dagger) = 19.6(2) kcal/mol and Delta S(double dagger) = -14.2(5) eu. The eliminated P2 unit can be transferred to the terminal phosphide complexes P[triple bond]M(N[(i)Pr]Ar)3, 3-M (M = Mo, W), and [P[triple bond]Nb(N[Np]Ar)3](-), 3-Nb, to give the cyclo-P3 complexes (P3)M(N[(i)Pr]Ar)3 and [(P3)Nb(N[Np]Ar)3](-). These reactions represent the formal addition of a P[triple bond]P triple bond across a M[triple bond]P triple bond and are the first efficient transfers of the P2 unit to substrates present in stoichiometric quantities. The related complex (OC)5W(Mes*NPP)Nb(N[Np]Ar)3, 1-W(CO)5, was used to transfer the (P2)W(CO)5 unit in an analogous manner to the substrates 3-M (M = Mo, W, Nb) as well as to [(OC)5WP[triple bond]Nb(N[Np]Ar)3](-). The rate constants for the fragmentation of 1 and 1-W(CO)5 were unchanged in the presence of the terminal phosphide 3-Mo, supporting the hypothesis that molecular P2 and (P2)W(CO)5, respectively, are reactive intermediates. In a reaction related to the combination of P[triple bond]P and M[triple bond]P triple bonds, the phosphaalkyne AdC[triple bond]P (Ad = 1-adamantyl) was observed to react with 3-Mo to generate the cyclo-CP2 complex (AdCP2)Mo(N[(i)Pr]Ar)3. Reactions of the electrophiles Ph3SnCl, Mes*NPCl, and AdC(O)Cl with the anionic, nucleophilic complexes [(OC)5W(P3)Nb(N[Np]Ar)3](-) and [{(OC)5W}2(P3)Nb(N[Np]Ar)3](-) yielded coordinated eta(2)-triphosphirene ligands. The Mes*NPW(CO)5 group of one such product engages in a fluxional ring-migration process, according to NMR spectroscopic data. The structures of (OC)5W(P3)W(N[(i)Pr]Ar)3, [(Et2O)Na][{(OC)5W}2(P3)Nb(N[Np]Ar)3], (AdCP2)Mo(N[(i)Pr]Ar)3, (OC)5W(Ph3SnP3)Nb(N[Np]Ar)3, Mes*NP(W(CO)5)P3Nb(N[Np]Ar)3, and {(OC)5W}2AdC(O)P3Nb(N[Np]Ar)3, as determined by X-ray crystallography, are discussed in detail.     

White phosphorus activation at a metal-phosphorus triple bond: a new route to cyclo-triphosphorus or cyclo-pentaphosphorus complexes of niobium

The Nb-P triple bond in [P≡Nb(N[Np]Ar)(3)](-) (Np = CH(2)(t)Bu; Ar = 3,5-Me(2)C(6)H(3)) has produced the first case of P(4) activation by a metal-ligand multiple bond. Treatment of P(4) with the sodium salt of the niobium phosphide complex in weakly coordinating solvents led to formation of the cyclo-P(3) anion [(P(3))Nb(N[Np]Ar)(3)](-). Treatment in tetrahydrofuran (THF) led to the formation of a cyclo-P(5) anion [(Ar[Np]N)(η(4)-P(5))Nb(N[Np]Ar)(2)](-), which represents a rare example of a substituted pentaphosphacyclopentadienyl ligand. The P(4) activation pathway was shown to depend on the dimer-monomer equilibrium of the niobium phosphide reagent, which, in turn, depends on the solvent used for the reaction. The pathway leading to the cyclo-P(3) product was shown to require a 2:1 ratio of the phosphide anion to P(4), while the cyclo-P(5) formation requires a 1:1 ratio. The cyclo-P(3) salt has been isolated in 56% yield as orange crystals of the [Na(THF)](2)[(P(3))Nb(N[Np]Ar)(3)](2) dimer or in 83% yield as an orange powder of [Na(12-crown-4)(2)][(P(3))Nb(N[Np]Ar)(3)]. A solid-state X-ray diffraction experiment on the former salt revealed that each Nb-P(3) unit exhibits pseudo-C(3) symmetry, while (31)P NMR spectroscopy showed a sharp signal at -223 ppm that splits into a doublet-triplet pair below -50 °C. It was demonstrated that this salt can serve as a P(3)(3-) source upon treatment with AsCl(3), albeit with modest yield of AsP(3). The cyclo-P(5) salt was isolated in 71% yield and structurally characterized from red crystals of [Na(THF)(6)][(Ar[Np]N)(η(4)-P(5))Nb(N[Np]Ar)(2)]. The anion in this salt can be interpreted as the product of trapping of an intermediate pentaphosphacycplopentadienyl structure through migration of one anilide ligand onto the P(5) ring. The W(CO)(5)-capped cyclo-P(3) salt was also isolated in 60% yield as [Na(THF)][(OC)(5)W(P(3))Nb(N[Np]Ar)(3)] from the activation of 0.5 equiv of P(4) with the sodium salt of the tungsten pentacarbonyl adduct of the niobium phosphide anion.     

The niobaziridine-hydride functional group: synthesis and divergent reactivity

A multistep synthetic strategy enables the isolation of the niobaziridine-hydride complex Nb(H)(eta2-tBu(H)C=NAr)(N[Np]Ar)2 (1, Np = neopentyl, Ar = 3,5-C6H3Me2), which functions as a reactive synthon for its tautomer, the three-coordinate, trisamide species Nb(N[Np]Ar)3 (2). Treatment of 1 with various small molecules has demonstrated its capacity to effect two-electron reduction chemistry. Most noteworthy is the reaction between 1 and elemental phosphorus (P4), providing in high yield the bridging diphosphide complex (mu2:eta2,eta2-P2)[Nb(N[Np]Ar)3]2. However, unsaturated organic functionality including nitriles and aldehydes can insert into the Nb-H bond of 1, leaving the niobaziridine ring intact, thus demonstrating that dual pathways of reactivity are available to the niobaziridine-hydride functional group.     

Organic nitriles from acid chlorides: an isovalent N for (O)CL exchange reaction mediated by a tungsten nitride complex

Nitride NW(N[i-Pr]Ar)3 (1, Ar = 3,5-C6H3Me2) was synthesized in two steps from known NW(O-t-Bu)3 (41% overall yield). Complex 1 is the tungsten congener of NMo(N[i-Pr]Ar)3, a known molecule that has been synthesized using N2 as the nitrido nitrogen source, but which undergoes no reaction with pivaloyl chloride. Compound 1 undergoes metathesis with pivaloyl chloride at 25 degrees C to form the corresponding nitrile in 97% yield. Another substrate examined in this work was the labeled acid chloride 1-Ad13C(O)Cl (Ad = adamantyl). The "(O)Cl" moiety is transferred to tungsten forming an oxo-chloride, (Ar[i-Pr]N)3W(O)Cl (3), as the final tungsten product; both 1 and 3 were characterized structurally by X-ray diffraction. An intermediate observed in the nitrile-forming reaction was characterized spectroscopically to be a tungsten acylimido complex. The latter assignment was substantiated by the synthesis and structural characterization of the compound (Ar[i-Pr]N)3W(NC(O)CF3)(O2CCF3) (2m). In addition, density functional theory calculations performed using ADF lent insight into the thermochemistry of the overall process.     

The first coordination polymers and hydrogen bonded networks containing octahedral Nb6 clusters and alkaline earth metal complexes

Three novel coordination polymers built of octahedral niobium cyanochloride clusters [Nb6Cl12(CN)6] and alkaline earth metal complexes have been prepared by reaction of aqueous solutions of (Me4N)4Nb6Cl18 and KCN with solutions of alkaline earth metal salts and 1,10-phenanthroline (phen) (1:2 molar ratio) in H2O/EtOH. The structures of [Ca(phen)2(H2O)3]2[Nb6Cl12(CN)6] x (phen)(EtOH)1.6 (1), [Ca(phen)2(H2O)2]2[Nb6Cl12(CN)6] x (phen)2 x 4H2O (2), and [Ba(phen)2(H2O)]2[Nb6Cl12(CN)6] (3) were determined by single-crystal X-ray diffraction. The three compounds were found to crystallize in the monoclinic system (space group Pn) with a = 11.5499(6) A, b = 17.5305(8) A, c = 21.784(1) A, beta = 100.877(1) degrees for 1; triclinic system (P1) with a = 12.609(4) A, b = 13.262(4) A, c = 16.645(5) A, alpha = 69.933(6) degrees, beta = 68.607(6) degrees, gamma = 63.522(5) degrees for 2; and a = 16.057(1) A, b = 16.063(1) A, c = 16.061(1) A, alpha = 86.830(1) degrees, beta = 64.380(1) degrees, gamma = 67.803(1) degrees for 3. Compounds 1 and 2 are built of cluster anions [Nb6Cl12(CN)6]4- trans-coordinated by two Ca2+ complexes via CN ligands to form neutral macromolecular units [Ca(phen)2(H2O)3]2[Nb6Cl12(CN)6] in 1 and [Ca(phen)2(H2O)2]2[Nb6Cl12(CN)6] in 2. Water of coordination and cyanide ligands form hydrogen bonded 3D and 2D frameworks for 1 and 2, respectively. The structure of 3 consists of [Nb6Cl12(CN)6]4- cluster anions and [Ba(phen)2(H2O)]2+ complexes linked through bridging cyanide ligands to form a neutral three-dimensional framework in which each barium complex is bound to three neighboring Nb6 clusters and each Nb6 cluster is linked to six Ba complexes.     

Synthesis and reactivity of cationic niobium and tantalum methyl complexes supported by imido and β-diketiminato ligands

The synthesis and reactivity of the cationic niobium and tantalum monomethyl complexes [(BDI)MeM(N(t)Bu)][X] (BDI = [Ar]NC(CH(3))CHC(CH(3))N[Ar], Ar = 2,6-(i)Pr(2)C(6)H(3); M = Nb, Ta; X = MeB(C(6)F(5))(3), B(C(6)F(5))(4)] was investigated. The cationic alkyl complexes failed to irreversibly bind CO but formed phosphine-trapped acyl complexes [(BDI)(R(3)PC(O)Me)M(N(t)Bu)][B(C(6)F(5))(4)] (R = Et, Cy) in the presence of a combination of trialkylphosphines and CO. Treatment of the monoalkyl cationic Nb complex with XylNC (Xyl = 2,6-Me(2)-C(6)H(3)) resulted in irreversible formation of the iminoacyl complex [(BDI)(XylN[double bond, length as m-dash]C(Me))Nb(N(t)Bu)][B(C(6)F(5))(4)], which did not bind phosphines but would add a methide group to the iminoacyl carbon to provide the known ketimine complex (BDI)(XylNCMe(2))Nb(N(t)Bu). Further stoichiometric chemistry explored i) migratory insertion reactions to form new alkoxide, amidinate, and ketimide complexes; ii) protonolysis reactions with Ph(3)SiOH to form thermally robust cationic siloxide complexes; and iii) catalytic high-density polyethylene formation mediated by the cationic Nb methyl complex.     

On the origin of selective nitrous oxide N-N bond cleavage by three-coordinate molybdenum(III) complexes

Reaction of Mo(N[R]Ar)(3) (R = (t)Bu or C(CD(3))(2)CH(3)) with N(2)O gives rise exclusively to a 1:1 mixture of nitride NMo(N[R]Ar)(3) and nitrosyl ONMo(N[R]Ar)(3), rather than the known oxo complex OMo(N[R]Ar)(3) and dinitrogen. Solution calorimetry measurements were used to determine the heat of reaction of Mo(N[R]Ar)(3) with N(2)O and, independently, the heat of reaction of Mo(N[R]Ar)(3) with NO. Derived from the latter measurements is an estimate (155.3 +/- 3.3 kcal.mol(-1)) of the molybdenum-nitrogen bond dissociation enthalpy for the terminal nitrido complex, NMo(N[R]Ar)(3). Comparison of the new calorimetry data with those obtained previously for oxo transfer to Mo(N[R]Ar)(3) shows that the nitrous oxide N-N bond cleavage reaction is under kinetic control. Stopped-flow kinetic measurements revealed the reaction to be first order in both Mo(N[R]Ar)(3) and N(2)O, consistent with a mechanism featuring post-rate-determining dinuclear N-N bond scission, but also consistent with cleavage of the N-N bond at a single metal center in a mechanism requiring the intermediacy of nitric oxide. The new 2-adamantyl-substituted molybdenum complex Mo(N[2-Ad]Ar)(3) was synthesized and found also to split N(2)O, resulting in a 1:1 mixture of nitrosyl and nitride products; the reaction exhibited first-order kinetics and was found to be ca. 6 times slower than that for the tert-butyl-substituted derivative. Discussed in conjunction with studies of the 2-adamantyl derivative Mo(N[2-Ad]Ar)(3) is the role of ligand-imposed steric constraints on small-molecule, e.g. N(2) and N(2)O, activation reactivity. Bradley's chromium complex Cr(N(i)Pr(2))(3) was found to be competitive with Mo(N[R]Ar)(3) for NO binding, while on its own exhibiting no reaction with N(2)O. Competition experiments permitted determination of ratios of second-order rate constants for NO binding by the two molybdenum complexes and the chromium complex. Analysis of the product mixtures resulting from carrying out the N(2)O cleavage reactions with Cr(N(i)Pr(2))(3) present as an in situ NO scavenger rules out as dominant any mechanism involving the intermediacy of NO. Simplest and consistent with all the available data is a post-rate-determining bimetallic N-N scission process. Kinetic funneling of the reaction as indicated is taken to be governed by the properties of nitrous oxide as a ligand, coupled with the azophilic nature of three-coordinate molybdenum(III) complexes.     

Synthesis of uranium(VI) terminal oxo complexes: molecular geometry driven by the inverse trans-influence

Oxidation of our previously reported uranium(V) oxo complexes, supported by the chelating ((R)ArO)(3)tacn(3-) ligand system (R = tert-butyl (t-Bu), 1-t-Bu; R = 1-adamantyl (Ad), 1-Ad), yields terminal uranium(VI) oxo complexes [(((R)ArO)(3)tacn)U(VI)(O)]SbF(6) (R = t-Bu, 2-t-Bu; R = Ad, 2-Ad). These complexes differ in their molecular geometry in that 2-t-Bu possesses pseudo-C(s) symmetry in solution and solid state as the terminal oxo ligand lies in the equatorial plane (as defined by the three aryloxide arms of the ligand) in order to accommodate the thermodynamic preference of high-valent uranium oxo complexes to have a σ- and π-donating ligand trans to the oxo (vis-à-vis the ubiquity of the linear UO(2)(2+) moiety). The distortion of the ligand--which stands in contrast to all other complexes of uranium supported by the ((R)ArO)(3)tacn(3-) ligand, including 2-Ad--is most clearly seen in the structures of 2-t-Bu, [(((t-Bu)ArO)(3)tacn)U(VI)(O)(eq)]SbF(6), and 3-t-Bu, [(((t-Bu)ArO)(3)tacn)U(VI)(O)(eq)(OC(O)CF(3))(ax)]. The solid-state structure of 3-t-Bu reveals that the trans U-O(ArO) bond length is shortened by 0.1 ? in comparison to the cis U-O(ArO) bonds and the trans U-O-C(ipso) angle is linearized (157.67° versus 147.85° and 130.03°). Remarkably, the minor modification of the ligand to have Ad groups at the ortho positions of the aryloxide arms is sufficient to stabilize a C(3v)-symmetric terminal uranium(VI) oxo complex (2-Ad) without a ligand trans to the oxo. These experimental results were reproduced in DFT calculations and allow the qualitative bracketing of the relative thermodynamic stabilization afforded by the inverse trans-influence as ～6 kcal mol(-1).     

Phosphaalkenes as long-lived phosphorus cluster surface functional groups: intramolecular P=C addition to a niobium-supported P7 cage

The diniobium octaphosphorus complex (P8)[Nb(OC[(2)Ad]Mes)3]2 (1) (Ad = adamantylidene, Mes = 2,4,6-Me3C6H2) contains a reactive niobium phosphinidene moiety that can be exploited for metathetical scission of the NbP bond. When 1 is treated with aryl ketones, loss of ONb(OC[(2)Ad]Mes)3(OEt2) (2) is observed along with concomitant formation of the corresponding phosphaalkene (RC6H4)2CPP7Nb(OC[(2)Ad]Mes)3 (3-R). Complexes 3-R rearrange to incorporate the (RC6H4)2CP unit into the phosphorus cage, thereby generating a saturated organo-phosphorus cluster complexed to the niobium tris-enolate platform, (RC6H4)2CP8Nb(OC[(2)Ad]Mes)3 (4-R). The structure of one such rearranged cluster 4-H, as determined by X-ray crystallography, is briefly discussed. An Eyring analysis of the first-order rearrangement of 3-H to 4-H gives activation parameters of DeltaH(double dagger) = 16.7 kcal/mol and DeltaS(double dagger) = -20.4 eu. A Hammett analysis of the phosphaalkene rearrangement, 3-R to 4-R, with substitution varying at the para positions of the aryl rings, reveals a linear relationship between the sigma values and the rearrangement rate constants. A concerted, asynchronous mechanism for the least-motion rearrangement of 3-H to 4-H is presented. When 1 is treated with alkyl ketones, similar loss of 2 and formation of the corresponding phosphaalkene is observed; however, the phosphaalkene complexes have considerably greater stability and are readily isolated.     

Synthesis, structure, and electrochemical studies of molybdenum and tungsten dinitrogen, diazenido, and hydrazido complexes that contain aryl-substituted triamidoamine ligands

One-electron reduction of [ArN(3)N]MoCl complexes (Ar = C(6)H(5), 4-FC(6)H(4), 4-t-BuC(6)H(4), 3,5-Me(2)C(6)H(3)) yields complexes of the type [ArN(3)N]Mo-N=N-Mo[ArN(3)N], while two-electron reduction yields ([ArN(3)N]Mo-N=N)(-) derivatives (Ar = C(6)H(5), 4-FC(6)H(4), 4-t-BuC(6)H(4), 3,5-Me(2)C(6)H(3), 3,5-Ph(2)C(6)H(3), and 3,5-(4-t-BuC(6)H(4))(2)C(6)H(3)). Compounds that were crystallographically characterized include ([t-BuC(6)H(4)N(3)N]Mo)(2)(N(2)), Na(THF)(6)([PhN(3)N]Mo-N=N)(2)Na(THF)(3), [t-BuC(6)H(4)N(3)N]Mo-N=N-Na(15-crown-5), and ([Ph(2)C(6)H(3)N(3)N]MoNN)(2)Mg(DME)(2). Compounds of the type [ArN(3)N]Mo-N=N-Mo[ArN(3)N] do not appear to form when Ar = 3,5-Ph(2)C(6)H(3) or 3,5-(4-t-BuC(6)H(4))(2)C(6)H(3), presumably for steric reasons. Treatment of diazenido complexes (e.g., [ArN(3)N]Mo-N=N-Na(THF)(x)) with electrophiles such as Me(3)SiCl or MeOTf yielded [ArN(3)N]Mo-N=NR complexes (R = SiMe(3) or Me). These species react further to yield ([ArN(3)N]Mo-N=NMe(2))(+) species in the presence of methylating agents. Addition of anionic methyl reagents to ([ArN(3)N]Mo-N=NMe(2))(+) species yielded [ArN(3)N]Mo(N=NMe(2))(Me) complexes. Reduction of [4-t-BuC(6)H(4)N(3)N]WCl under dinitrogen leads to a rare ([t-BuC(6)H(4)N(3)N]W)(2)(N(2)) species that can be oxidized by two electrons to give a stable dication (as its BPh(4)(-) salt). Reduction of hydrazido species leads to formation of Mo=N in low yields, and only dimethylamine could be identified among the many products. Electrochemical studies revealed expected trends in oxidation and reduction potentials, but also provided evidence for stable neutral dinitrogen complexes of the type [ArN(3)N]Mo(N(2)) when Ar is a relatively bulky terphenyl substituent.     

Synthesis and structures of niobium(V) complexes stabilized by linear-linked aryloxide trimers

The preparation and characterization of a series of niobium(V) complexes that incorporate the linear-linked aryloxide trimers 2,6-bis(4,6-dimethylsalicyl)-4-tert-butylphenol [H3(Me-L)] and 2,6-bis(4-methyl-6-tert-butylsalicyl)-4-tert-butylphenol [H3(tBu-L)] are described. The chloride complex [Nb(Me-L)Cl2]2 (1) was prepared in high yield by reaction of NbCl5 with H3(Me-L) in toluene. In contrast, the analogous reaction with H3(tBu-L) gave a mixture of [Nb(tBu-L)Cl2]2 (2) and [Nb(de-tBu-L)Cl2]2 (3a). During the formation of 3a, one of tert-butyl groups at the ortho position in the tBu-L ligand was lost. When the NbCl5/H3(tBu-L) reaction was carried out in acetonitrile, Nb[H(tBu-L)]Cl3(NCMe) (4) was obtained. Heating a solution of 4 in toluene generated 2 and 3a. The isolated complex 4 underwent ligand redistribution in acetonitrile to produce Nb[H(tBu-L)]2Cl(NCMe) (5). Treatment of NbCl5 with Li3(tBu-L) in toluene afforded 2. The chloride ligands in 1 and 2 smoothly reacted with 4 equiv of MeMgI and LiStBu, resulting in [Nb(R-L)Me2]2 [R = Me (6), tBu (7)] and Nb(Me-L)(StBu)2 (8), respectively. A number of the above complexes have been characterized by X-ray crystallography. In the structures of 1, 2, and 6, the R-L ligand is bound to the metal center with a U-coordination mode, while an alternative S-conformation is adopted for 3a and 8. Complexes 4 and 5 contain a bidentate H(tBu-L) diphenoxide-monophenol ligand.     

A long Nb=O double bond in bis(pyridinium) tetra­chlorooxo(pyridine‐κN)niobate(V) chloride

The asymmetric unit of the title compound, (C₅H₆N)₂[NbCl₄O(C₅H₅N)]Cl or (pyH)₂[O=NbCl₄(py)]Cl (py is pyridine), contains a discrete anionic niobium(V) complex, [O=NbCl₄(py)]⁻, and two protonated pyridine mol­ecules, which form medium–strong hydrogen bonds with the Cl⁻ counter‐ion. The Nb=O distance of 1.7643 (17) Å is the longest among those in congener niobium complexes reported to date. Extensive density functional theory studies of conformations of [O=NbCl₄(py)]⁻ and structural data mining raise doubts regarding the reliability of the length of this Nb=O double bond.     

6-Coordinate tungsten(VI) tris-n-isopropylanilide complexes: products of terminal oxo and nitrido transformations effected by main group electrophiles

The nitridotungsten(vi) complex NW(N[i-Pr]Ar)(3) (-N, Ar = 3,5-Me(2)C(6)H(3)) reacts with (CF(3)C(O))(2)O followed by ClSiMe(3) to give the isolable trifluoroacetylimido-chloride complex -(NC(O)CF(3))Cl, with oxalyl chloride to give cyanate-dichloride -(OCN)(Cl)(2), and with PCl(5) to give trichlorophosphinimide-dichloride -(NPCl(3))(Cl)(2). The oxo-chloride complex -(O)Cl, obtained from -N upon treatment with pivaloyl chloride, reacts with PCl(5) to give trichloride -(Cl)(3). Synthetic and structural details are reported for the new tungsten trisanilide derivatives.     

Activation of atmospheric nitrogen and azobenzene N=N bond cleavage by a transient Nb(III) complex

Atmospheric N2 is activated by two transient Nb(III) "(PNP)NbCl2" (PNP- = N[2-P(CHMe2)2-4-methylphenyl]2) fragments to form the bridging diimido [(PNP)NbCl2]2(mu-N2) (1). Complex 1 can also be independently synthesized from Nb(IV) and Nb(V) precursors via one-electron and transmetalation reactions, respectively. In the presence of azobenzene, the transient Nb(III) intermediate, prepared from Li(PNP) and NbCl3(DME) (DME = dimethoxyethane) under Ar, cleaves the N=N bond via a metal-ligand cooperative four-electron reduction to form niobium imide and phosphoranimine functionalities. Structural studies are presented and discussed for various Nb systems bearing the pincer-type framework PNP as well as the N2 and azobenzene activated products. Theoretical studies addressing the Nb-N2-Nb core in 1 are also presented.     

Formation and reactivity of the Os(IV)-azidoimido complex, PPN[Os(IV)(bpy)(Cl)(3)(N(4))

Reactions between the Os(VI)-nitrido complexes, [OsVI(L2)(Cl)3(N)] (L2 = 2,2'-bipyridine (bpy) ([1]), 4,4'-dimethyl-2,2'-bipyridine (Me2bpy), 1,10-phenanthroline (phen), and 4,7-diphenyl-1,10-phenanthroline (Ph2phen)), and bis-(triphenylphosphoranylidene)ammonium azide (PPNN3) in dry CH3CN at 60 degrees C under N2 give the corresponding Os(IV)-azidoimido complexes, [OsIV(L2)(Cl)3(NN3)]- (L2 = bpy = [2]-, L2 = Me2bpy = [3]-, L2 = phen = [4]-, and L2 = Ph2phen = [5]-) as their PPN+ salts. The formulation of the N42- ligand has been substantiated by 15N-labeling, IR, and 15N NMR measurements. Hydroxylation of [2]- at Nalpha with O<--NMe3.3H2O occurs to give the Os(IV)-azidohydroxoamido complex, [OsIV(bpy)(Cl)3(N(OH)N3)] ([6]), which, when deprotonated, undergoes dinitrogen elimination to give the Os(II)-dinitrogen oxide complex, [OsII(bpy)(Cl)3(N2O)]- ([7]-). They are the first well-characterized examples of each kind of complex for Os.     

CRYSTAL STRUCTURE AND X-RAY CRYSTALLOGRAPHIC ANALYSIS OF THE BINUCLEAR CLUSTER THIOCYANATE COMPLEX OF NIOBIUM(IV)

Journal of Structural Chemistry - The structure of a binuclear niobium(IV) thiocyanate complex (Bu4N)4[Nb2(μ2-S2)2(NCS)8]·H2O (1·H2O) is studied by X-ray crystallography. Compound...     

Rh(I) coordination chemistry of chiral alpha-aminophosphine(eta6-arene)chromium tricarbonyl ligands

The diastereoselective addition of Ph(2)PH to the chiral ortho-substituted eta(6)-benzaldimine complexes (eta(6)-o-X-C(6)H(4)CH=NAr)Cr(CO)(3) (1, X = MeO, Ar = p-C(6)H(4)OMe; 2, X = Cl, Ar = Ph) leads to the formation of the corresponding chiral aminophosphines (alpha-P,N) Ph(2)P-CH(Ar(1))-NHAr(2) (3, Ar(1) = o-C(6)H(4)(OCH(3))[Cr(CO)(3)], Ar(2) = p-C(6)H(4)OCH(3); 4, Ar(1) = o-C(6)H(4)Cl[Cr(CO)(3)], Ar(2) = Ph) in equilibrium with the starting materials. The uncomplexed benzaldimine (o-ClC(6)H(4)CH=NPh), 2', analogously produces an equilibrium amount of the corresponding aminophosphine Ph(2)P-CH(Ar(1))-NHAr(2) (4', Ar(1) = o-C(6)H(4)Cl, Ar(2) = Ph). Depending on the equilibrium constant, the subsequent addition of (1)/(2) equiv of [RhCl(COD)](2) (COD = 1,5-cyclooctadiene) leads to either Ph(2)PH oxidative addition in the case of 3 or to the corresponding [RhCl(COD)(alpha-P,N)] complexes [RhCl(COD)(Ph(2)P-CH[o-C(6)H(4)Cl[Cr(CO)(3)]]-NHPh)] (5) and [RhCl(COD)(Ph(2)P-CH(o-C(6)H(4)Cl)-NHPh)] (5') in the cases of the aminophosphines 4 and 4'. The addition of the latter ligands, as racemic mixtures, to (1)/(4) equiv of [Rh(CO)(2)Cl](2) leads to the [RhCl(CO)(alpha-P,N)(2)] complexes [RhCO(Ph(2)P-CH[o-C(6)H(4)Cl[Cr(CO)(3)]]-NHPh)(2)Cl] (7) or [RhCO(Ph(2)P-CH(o-C(6)H(4)Cl)-NHPh)(2)Cl] (7') as mixtures of (R(C),S(C))/(S(C),R(C)) and (R(C),R(C))/(S(C),S(C)) diastereomers. The rhodium complexes 5 and 7' have been fully characterized by IR and (31)P NMR spectroscopies and X-ray crystallography. These compounds exhibit intramolecular Rh-Cl.H-N interactions in the solid state and in solution. The stability of the new rhodium complexes has been studied under different CO pressures. Under 1 atm of CO, 5 is converted to an unstable complex [RhCl(CO)(2)(alpha-P,N)], 6, which undergoes ligand redistribution leading to 7 plus an unidentified complex. This reaction is inhibited under higher CO or syngas pressure, as confirmed by the observation of the same catalytic activity in hydroformylation when styrene was added to a catalytic mixture that was either freshly prepared or left standing for 20 h under high CO pressure.     

Ruthenium complexes with tetraphenylimidodiphosphinate: syntheses, structures, and applications to catalytic organic oxidation

Treatment of Ru(PPh3)3Cl2 with K(tpip) (tpip(-)=[N(Ph2PO)2](-)) afforded Ru(tpip)(PPh3)2Cl (1), which reacted with 4- t-Bu-C6H4CN, SO2(g), and NH 3(g) to give Ru(tpip)(PPh3)2Cl(4- t-BuC6H4CN) (2), Ru(tpip)(PPh3)2Cl(SO2) (3), and fac-[Ru(NH3)3(PPh3)2Cl][tpip] (4), respectively. Reaction of [Ru(CO)2Cl2] x with K(tpip) in refluxing tetrahydrofuran (THF) led to isolation of the K/Ru bimetallic compound K 2Ru2(tpip)4(CO)4Cl2 (5). Photolysis of cis-Ru(tpip) 2(NO)Cl in MeCN and wet CH 2Cl 2 afforded cis-Ru(tpip) 2(MeCN)Cl ( 6) and cis-Ru(tpip)2(H2O)Cl (7), respectively. Refluxing 6 in neat THF yielded Ru(tpip) 2(THF)Cl (8). Treatment of Ru(CHR)Cl2(PCy3)2 (Cy=cyclohexyl) with [Ag(tpip)] 4 afforded cis-Ru(tpip)2(CHR)(PCy3) [R=Ph (9), OEt (10)]. Complex 9 is capable of catalyzing oxidation of alcohols and olefins with N-methylmorpholine N-oxide and iodosylbenzene, respectively. The crystal structures of 2-7 and 9 were determined.     

Reactivity of niobocene dihalogenides toward nitroso derivatives. EPR and IR characterization of the first niobium(IV) complexes containing an ArNO-N,O ligand

The reaction of [Nb(η⁵-C₅H₄R)₂X₂] [1: R = SiMe₃, X = Cl; 2: R = SiMe₃, X = Br; 3: R = H, X = Cl; 4: R =^t, X = Cl] with nitroso derivatives ArNO [a: Ar = Ph; b: Ar = o-CH₃-C₃H₄; c: Ar = p-(CH₃)₂NC₆H₄] yields paramagnetic complexes formulated as [Nb(η⁵-C₅H₄R)(η³-C₅H₄R)X₂(ArNO-N,O) 1a, 1b, 1c, 2a, 3a, 4a and 4c, which have been characterized by ESR and IR spectroscopy.