Gas-phase basicity of methionine

Proton affinity and protonation entropy of methionine (Met) were determined by the extended kinetic method from ESI-Q-TOF tandem mass spectrometry experiments. The values, PA(Met) = 937.5 +/- 2.9 kJ mol(-1) and Delta(p)S degrees (Met) = - 22 +/- 5 J mol(-1) K(-1), lead to gas-phase basicity GB(Met) = 898.2 +/- 3.2 kJ.mol(-1). Quantum chemical calculations using density functional theory confirm that the proton affinity of Met is indeed in the 940 kJ mol(-1) range and that a significant entropy loss, of at least - 25 J mol(-1) K(-1), occurs upon protonation. This last point is evidenced here for the first time and suggests revision of the tabulated protonation thermochemistry of Met. A comparison with previous experimental data allows us to propose the following evaluated thermochemical values: PA(Met) = 943 +/- 4 kJ mol(-1) and Delta(p)S degrees (Met) = - 35 +/- 15 J mol(-1) K(-1) and GB(Met) = 900 +/- 2 kJ mol(-1).     

Protonation thermochemistry of aminoacetonitrile

The gas-phase basicity (GB) of aminoacetonitrile (NH2CH2CN, 1) has been determined from measurement of proton transfer equilibrium constants in an ion cyclotron resonance mass spectrometer (GB(1) = 789.3 +/- 1.0 kJ x mol(-1)). Molecular orbital calculations up to the G2 level demonstrate that protonation occurs preferentially on the nitrogen atom of the NH2 group, and provide a theoretical proton affinity (PA(1)) of 824.0 kJ x mol(-1). Exact calculation of the entropy associated with hindered rotations and consideration of Boltzman distribution of conformers allow a theoretical estimate of the molar protonation entropy S degrees (1H+) - S degrees (1) = 8.6 J x mol(-1) x K(-1). Combining this value with experimental GB(1) leads to an 'experimental' proton affinity of 819.2 kJ x mol(-1), in close agreement with the G2 expectation.     

Gas-phase protonation thermochemistry of arginine

The gas-phase basicity (GB), proton affinity (PA), and protonation entropy (DeltapS degrees (M)=S degrees (MH+)-S degrees (M)) of arginine (Arg) have been experimentally determined by the extended kinetic method using an electrospray ionization quadrupole time-of-flight (ESI-Q-TOF) mass spectrometer. This method provides GB(Arg)=1004.3+/-2.2 (4.9) kJ.mol(-1) (indicated errors are standard deviations, and in parentheses, 95% confidence limits are given). Consideration of previous experimental data using a fast atom bombardment ionization tandem sector mass spectrometer slightly modifies these estimates since GB(Arg)=1005.9+/-3.1 (6.6) kJ.mol(-1). Lower limits of the proton affinity, PA(Arg)=1046+/-4 (7) kJ.mol(-1), and of the "protonation entropy", DeltapS degrees (Arg)=S degrees (ArgH+)-S degrees (Arg)=-27+/-7 (15) J.mol(-1).K(-1), are also provided by the experiments. Theoretical calculations conducted at the B3LYP/6-311+G(3df,2p)//B3LYP/6-31+G(d,p) level, including 298 K enthalpy correction, predict a proton affinity value of ca. 1053 kJ.mol-1 after consideration of isodesmic proton-transfer reactions with guanidine as the reference base. Computations including explicit treatment of hindered rotations and mixing of conformers confirm that a noticeable entropy loss does occur upon protonation, which leads to a theoretical DeltapS degrees (Arg) term of ca. -45 J.mol(-1).K(-1). The following evaluated thermochemical parameter values are proposed: GB(Arg)=1005+/-3 kJ.mol(-1); PA(Arg)=1051+/-5 kJ.mol(-1), and DeltapS degrees (Arg)=-45+/-12 J.mol(-1).K(-1).     

Gas-phase protonation thermochemistry of adenosine

The goal of this work was to obtain a detailed insight on the gas-phase protonation energetic of adenosine using both mass spectrometric experiments and quantum chemical calculations. The experimental approach used the extended kinetic method with nanoelectrospray ionization and collision-induced dissociation tandem mass spectrometry. This method provides experimental values for proton affinity, PA(adenosine) = 979 +/- 1 kJ.mol (-1), and for the "protonation entropy", Delta p S degrees (adenosine) = S degrees (adenosineH (+)) - S degrees (adenosine) = -5 +/- 5 J.mol (-1).K (-1). The corresponding gas-phase basicity is consequently equal to: GB(adenosine) = 945 +/- 2 kJ.mol (-1) at 298K. Theoretical calculations conducted at the B3LYP/6-311+G(3df,2p)//B3LYP/6-31+G(d,p) level, including 298 K enthalpy correction, predict a proton affinity value of 974 kJ.mol (-1) after consideration of isodesmic proton transfer reactions with pyridine as the reference base. Moreover, computations clearly showed that N3 is the most favorable protonation site for adenosine, due to a strong internal hydrogen bond involving the hydroxyl group at the 2' position of the ribose sugar moiety, unlike observations for adenine and 2'-deoxyadenosine, where protonation occurs on N1. The existence of negligible protonation entropy is confirmed by calculations (theoretical Delta p S degrees (adenosine) approximately -2/-3 J.mol (-1).K (-1)) including conformational analysis and entropy of hindered rotations. Thus, the calculated protonation thermochemical properties are in good agreement with our experimental measurements. It may be noted that the new PA value is approximately 10 kJ.mol (-1) lower than the one reported in the National Institute of Standards and Technology (NIST) database, thus pointing to a correction of the tabulated protonation thermochemistry of adenosine.     

Structure, reactivity and thermochemical properties of protonated lactic acid

The protonation energetics of lactic acid (LA) were experimentally determined by the kinetic method including the entropy effect. The values (proton affinity, PA(LA) = 817.4 +/- 4.3 kJ mol(-1); protonation entropy, DeltaS degrees (p)(LA) = -2 +/- 5 J K(-1) mol(-1); gas-phase basicity, GB(LA) = 784.5 +/- 4.5 kJ mol(-1)) agree satisfactorily with computed G2(MP2) expectations (PA(LA) = 811.8 kJ mol(-1); DeltaS degrees (p)(LA) = -7.1 J K(-1) mol(-1); GB(LA) = 777.4 kJ mol(-1)). The fragmentation behaviour of protonated lactic acid (LAH(+)) is dominated by carbon monoxide loss followed by elimination of a water molecule. Direct dehydration of LAH(+) is only a high-energy process hardly competitive with the CO loss. A complete mechanistic scheme, based on MP2/6-31G* calculations, is proposed; it involves isomerization of the various protonated forms of LA and the passage through the ion-neutral complex between the 2-hydroxypropyl acylium cation and a water molecule.     

Protonation thermochemistry of alpha-aminoacids bearing a basic residue

The proton affinity, PA, and protonation entropy, Delta(p)S degree, of glycine (Gly), 1, aspartic acid (Asp), 2, asparagine (Asn), 3, histidine (His), 4, lysine (Lys), 5, glutamic acid (Glu), 6, and glutamine (Gln), 7, have been reinvestigated by the extended kinetic method, using the "isothermal point" method and the orthogonal distance regression, ODR, technique. The proton affinity values of a-aminoacids bearing a basic residue (PA = 926.8; 965.2; 996.0; 993.9; 981.8 and 988.1 kJ.mol(-1) for 2-7, respectively) show significant deviation from the tabulated values. As expected from the effect of a strong intramolecular hydrogen bond in the protonated forms of these peculiar aminoacids, negative protonation entropies are detected (Delta(p)S degree = 36; 43; 37; 29; 95 and 55 J mol(-1) K(-1) for for 27 respectively).     

Protonated p-Benzoquinone

The structure and energetics of protonated p-benzoquinone (pBQ) have been investigated using high-pressure mass spectrometry and ab initio calculations. The experimental proton affinity of pBQ is 801.4 +/- 8.9 kJ/mol (191.5 +/- 2.1 kcal/mol) (1sigma) from bracketing measurements and hydration thermochemistry. This value is supported by theory and by analogies with related compounds. In its protonation chemistry, pBQ behaves as an aliphatic ketone, both structurally and energetically. The dissociation of the hydrate (pBQH(+)).(H(2)O) is characterized by DeltaH degrees (D) = 90.0 +/- 2.3 kJ/mol and DeltaS degrees (D) = 123.4 +/- 4.9 J/mol.K (95% confidence).     

Mechanistic information from low-temperature rapid-scan and NMR measurements on the protonation and subsequent reductive elimination reaction of a (diimine)platinum(II) dimethyl complex

A detailed kinetic study of the protonation and subsequent reductive elimination reaction of a (diimine)platinum(II) dimethyl complex was undertaken in dichloromethane over the temperature range of -90 to +10 degrees C by stopped-flow techniques. Time-resolved UV-vis monitoring of the reaction allowed the assessment of the effects of acid concentration, coordinating solvent (MeCN) concentration, temperature, and pressure. The second-order rate constant for the protonation step was determined to be 15200 +/- 400 M(-1) s(-1) at -78 degrees C, and the corresponding activation parameters are DeltaH = 15.2 +/- 0.6 kJ mol(-1) and DeltaS = -85 +/- 3 J mol(-1) K(-1), which are in agreement with the addition of a proton that results in the formation of the platinum(IV) hydrido complex. The kinetics of the second, methane-releasing reaction step do not show an acid dependence, and the MeCN concentration also does not significantly affect the reaction rate. The activation parameters for the second reaction step were found to be DeltaH = 75 +/- 1 kJ mol(-1), DeltaS = +38 +/- 5 J mol(-1) K(-1), and DeltaV = +18 +/- 1 cm(3) mol(-1), strongly suggesting a dissociative character of the rate-determining step for the reductive elimination reaction. The spectroscopic and kinetic observations were correlated with NMR data and assisted the elucidation of the underlying reaction mechanism.     

The gas-phase basicity and proton affinity of 1,3,5-cycloheptatriene--energetics,structure and interconversion of dihydrotropylium ions

The hitherto unknown gas-phase basicity and proton affinity of 1,3,5-cycloheptatriene (CHT) have been determined by Fourier transform ion cyclotron resonance (FT-ICR) mass spectrometry. Several independent techniques were used in order to exclude ambiguities due to proton-induced isomerisation of the conjugate cyclic C(7)H(9)(+) ions, [CHT + H](+). The gas-phase basicity obtained by the thermokinetic method, GB(CHT) = 799 +/- 4 kJ mol(-1), was found to be identical, within the limits of experimental error, with the values measured by the equilibrium method starting with protonated reference bases, and with the values resulting from the measurements of the individual forward and reverse rate constants, when corrections were made for the isomerised fraction of the C(7)H(9)(+) population. The experimentally determined gas-phase basicity leads to the proton affinity of cycloheptatriene, PA(CHT) = 833 +/- 4 kJ mol(-1), and the heat of formation of the cyclo-C(7)H(9)(+) ion, deltaH(f)(0)([CHT + H](+)) = 884 +/- 4 kJ mol(-1). Ab initio calculations are in agreement with these experimental values if the 1,2-dihydrotropylium tautomer, [CHT + H((1))](+), generated by protonation of CHT at C-1, is assumed to be the conjugate acid, resulting in PA(CHT) = 825 +/- 2 kJ mol(-1) and deltaH(f)(0)(300)([CHT + H((1))](+)) = 892 +/- 2 kJ mol(-1). However, the calculations indicate that protonation of cycloheptatriene at C-2 gives rise to transannular C-C bond formation, generating protonated norcaradiene [NCD + H](+), a valence tautomer being 19 kJ mol(-1) more stable than [CHT + H((1))](+). The 1,4-dihydrotropylium ion, [CHT + H((3))](+), generated by protonation of CHT at C-3, is 17 kJ mol(-1) less stable than [CHT + H((1))](+). The bicyclic isomer [NCD + H](+) is separated by relatively high barriers, 70 and 66 kJ mol(-1) from the monocyclic isomers, [CHT + H((1))](+) and [CHT + H((3))](+), respectively. Therefore, the initially formed 1,2-dihydrotropylium ion [CHT + H((1))](+) does not rearrange to the bicyclic isomer [NCD + H](+) under mild protonation conditions.     

Solvolysis of 1,1-dimethyl-4-alkenyl chlorides: evidence for pi-participation

Tertiary 1,1-dimethyl-4-alkenyl chloride (1) solvolyzes with significantly reduced secondary beta-deuterium kinetic isotope effect (substrate with two trideuteromethyl groups) and has a lower entropy and enthalpy of activation than the referent saturated analogue 4 (k(H)/k(D) = 1.30 +/- 0.03 vs k(H)/k(D) = 1.79 +/- 0.01; Delta Delta H(++) = -9 kJ mol(-1), Delta Delta S(++) = -36 J mol(-1) K(-1), in 80% v/v aqueous ethanol), indicating participation of the double bond in the rate-determining step. Transition structure 1-TS computed at the MP2(fc)/6-31G(d) level of theory revealed that the reaction proceeds through a late transition state with considerably pronounced double bond participation and a substantially cleaved C-Cl bond. The doubly unsaturated compound 3 (1,1-dimethyl-4,8-alkadienyl chloride) solvolyzes with further reduction of the isotope effect, and a drastically lower entropy of activation (k(H)/k(D) = 1.14 +/- 0.01; DeltaS(++) = -152 +/- 12 J mol(-1) K(-1), in 80% v/v aqueous ethanol), suggesting that the solvolysis of 3 proceeds by way of extended pi-participation, i.e., the assistance of both double bonds in the rate-determining step.     

Proton affinity of β-oxalylaminoalanine (BOAA): Incorporation of direct entropy correction into the single-reference kinetic method

A new version of the single-reference-extended kinetic method is presented in which direct entropy correction is incorporated. Results of calibration experiments with the monodentate base pyridine and the bidentate base ethylenediamine are presented for which the method provides proton affinities in excellent agreement with published values and reasonable predictions for the protonation entropies. The method is then used to determine the proton affinity and protonation entropy of the non-protein amino acid beta-oxalylaminoalanine (BOAA). The PA of BOAA is found to be 933.1 +/- 7.8 kJ/mol and a prediction for the protonation entropy of -39 J mol(-1) K(-1) is also obtained, indicating a significant degree of intramolecular hydrogen bonding in the protonated form. These results are supported by hybrid density functional theory calculations at the B3LYP/6-311++G**//B3LYP/6-31+G* level. They indicate that the preferred site of protonation is the alpha-nitrogen atom (PA = 935.0 kJ/mol) and that protonated BOAA has a strong hydrogen bond between the hydrogen on the alpha-amino group and one of the carbonyl oxygen atoms on the side chain.     

A quantum chemical study of the protonation of phenylphosphine and its halogenated derivatives

The protonation and methylation of phenylphosphine (C(6)H(5)PH(2)) and its mono-halogenated derivatives have been studied using ab initio quantum chemical calculations. Density functional theory (B3LYP) calculations using the 6-311++G(d,p) basis set consistently confirm that protonation of phenylphosphines takes place at the phosphorus atom; the C(4)-protonated phenylphosphine lying about 66 kJ mol(-1) above the P-protonated isomer. Similarly, methylation of phosphines consistently occurs at phosphorus. The proton and methyl cation affinities are estimated as follows: PA(phenylphosphine) = 863 +/- 10 kJ mol(-1) and MCA(phenylphosphine) = 515 -/+ 12 kJ mol(-1). Mono-halogen substitution appears to reduce the proton affinites by up to 20 kJ mol(-1). In this context, following P-protonation of either ameta- or a para-X-C(6)H(4)-PH(2), an elimination of the halogen X-atom under collisional activation (CA) conditions is expected to lead to a distonic radical cation, a low-energy isomer being 50 kJ mol(-1) above ionized phenylphosphine.     

Stabilities of the aqueous complexes Cm(CO3)33- and Am(CO3)33- in the temperature range 10-70 degrees C

The carbonate complexation of curium(III) in aqueous solutions with high ionic strength was investigated below solubility limits in the 10-70 degrees C temperature range using time-resolved laser-induced fluorescence spectroscopy (TRLFS). The equilibrium constant, K(3), for the Cm(CO(3))(2-) + CO(3)(2-) right harpoon over left harpoon Cm(CO(3))(3)(3-) reaction was determined (log K(3) = 2.01 +/- 0.05 at 25 degrees C, I = 3 M (NaClO(4))) and compared to scattered previously published values. The log K(3) value for Cm(III) was found to increase linearly with 1/T, reflecting a negligible temperature influence on the corresponding molar enthalpy change, Delta(r)H(3) = 12.2 +/- 4.4 kJ mol(-1), and molar entropy change, Delta(r)S(3) = 79 +/- 16 J mol(-1) K(-1). These values were extrapolated to I = 0 with the SIT formula (Delta(r)H(3) degrees = 9.4 +/- 4.8 kJ mol(-1), Delta(r)S(3) degrees = 48 +/- 23 J mol(-1) K(-1), log K(3) degrees = 0.88 +/- 0.05 at 25 degrees C). Virtually the same values were obtained from the solubility data for the analogous Am(III) complexes, which were reinterpreted considering the transformation of the solubility-controlling solid. The reaction studied was found to be driven by the entropy. This was interpreted as a result of hydration changes. As expected, excess energy changes of the reaction showed that the ionic strength had a greater influence on Delta(r)S(3) than it did on Delta(r)H(3).     

Heats of formation and singlet-triplet separations of hydroxymethylene and 1-hydroxyethylidene

Thermochemical parameters of hydroxymethylene (HC:OH) and 1-hydroxyethylidene (CH3C:OH) were evaluated by using coupled-cluster, CCSD(T), theory, in conjunction with the augmented correlation consistent, aug-cc-pVnZ, basis sets, with n = D, T, Q, and 5, extrapolated to the complete basis set limit. The predicted value at 298 K for Delta Hf(CH2O) is -26.0 +/- 1 kcal/mol, as compared to an experimental value of -25.98 +/- 0.01 kcal/mol, and for Delta Hf(CH:OH) it is 26.1 +/- 1 kcal/mol. The hydroxymethylene-formaldehyde energy gap is 52.1 +/- 0.5 kcal/mol, the singlet-triplet separation of hydroxymethylene is Delta E(ST)(HC:OH) = 25.3 +/- 0.5 kcal/mol, the proton affinity is PA(HC:OH) = 222.5 +/- 0.5 kcal/mol, and the ionization energy is IEa(HC:OH) = 8.91 +/- 0.04 eV. The predicted value at 298 K for Delta Hf(CH3CHO) is -39.1 +/- 1 kcal/mol as compared to an experimental value of -40.80 +/- 0.35 kcal/mol, and for Delta Hf(CH3C:OH) it is 11.2 +/- 1 kcal/mol. The hydroxyethylidene-acetaldehyde energy gap is 50.6 +/- 0.5 kcal/mol, the singlet-triplet separation of 1-hydroxyethylidene is Delta E(ST)(CH3C:OH) = 30.5 +/- 0.5 kcal/mol, the proton affinity is PA(CH3C:OH) = 234.7 +/- 0.5 kcal/mol, and the ionization energy is IEa(CH3C:OH) = 8.18 +/- 0.04 eV. The calculated energy differences between the carbene and aldehyde isomers, and, thus, the heats of formation of the carbenes, differ from the experimental values by 2.5 kcal/mol.     

Activation energy for the disproportionation of HBrO2 and estimated heats of formation of HBrO2 and BrO2

The kinetics of the reaction HBrO(2) + HBrO(2) --> HOBr + BrO(3)(-) + H(+) is investigated in aqueous HClO(4) (0.04-0.9 M) and H(2)SO(4) (0.3-0.9 M) media and at temperatures in the range 15-38 degrees C. The reaction is found to be cleanly second order in [HBrO(2)], with the experimental rate constant having the form k(exp) = k + k'[H(+)]. The half-life of the reaction is on the order of a few tenths of a second in the range 0.01 M < [HBrO(2)](0) < 0.02 M. The detailed mechanism of this reaction is discussed. The activation parameters for kare found to be E(double dagger) = 19.0 +/- 0.9 kJ/mol and DeltaS(double dagger) = -132 +/- 3 J/(K mol) in HClO(4), and E(double dagger) = 23.0 +/- 0.5 kJ/mol and DeltaS(double dagger) = -119 +/- 1 J/(K mol) in H(2)SO(4). The activation parameters for k' are found to be E(double dagger) = 25.8 +/- 0.5 kJ/mol and DeltaS(double dagger) = -106 +/- 1 J/(K mol) in HClO(4), and E(double dagger) = 18 +/- 3 kJ/mol and DeltaS(double dagger) = -130 +/- 11 J/(K mol) in H(2)SO(4). The values Delta(f)H(29)(8)(0)[BrO(2)(aq)] = 157 kJ/mol and Delta(f)H(29)(8)(0)[HBrO(2)(aq)] = -33 kJ/mol are estimated using a trend analysis (bond strengths) based on the assumption Delta(f)H(29)(8)(0)[HBrO(2)(aq)] lies between Delta(f)H(29)(8)(0)[HOBr(aq)] and Delta(f)H(29)(8)(0)[HBrO(3)(aq)] as Delta(f)H(29)(8)(0)[HClO(2)(aq)] lies between Delta(f)H(29)(8)(0)[HOCl(aq)] and Delta(f)H(29)(8)(0)[HClO(3)(aq)]. The estimated value of Delta(f)H(29)(8)(0)[BrO(2)(aq)] agrees well with calculated gas-phase values, but the estimated value of Delta(f)H(29)(8)(0)[HBrO(2)(aq)], as well as the tabulated value of Delta(f)H(29)(8)(0)[HClO(2)(aq)], is in substantial disagreement with calculated gas-phase values. Values of Delta(r)H(0) are estimated for various reactions involving BrO(2) or HBrO(2).     

The thermodynamics of the transformation of graphite to multiwalled carbon nanotubes

The thermodynamic quantities associated to the transformation from graphite to multiwalled carbon nanotubes (MWCNTs) were determined by electromotive force (emf) and differential scanning calorimetry (DSC) measurements. From the emf versus T data of galvanic cell Mo|Cr(3)C(2), CrF2, MWCNTs|CaF2 s.c.|Cr(3)C(2), CrF2, graphite|Mo with CaF2 as solid electrolyte, Delta(r)H(T) degrees= 8.25 +/- 0.09 kJ mol(-1) and Delta(r)S(T) degrees= 11.72 +/- 0.09 JK(-1) mol(-1) were found at average temperature T = 874 K. The transformation enthalpy was also measured by DSC of the Mn(7)C(3) formation starting from graphite or MWCNTs. Thermodynamic values at 298 K were calculated to be: Delta(r)H(298) degrees = 9.0 +/- 0.8 kJ mol(-1) as averaged value from both techniques and Delta(r)S(298) degrees approximately Delta(r)S(T) degrees. At absolute zero, the residual entropy of MWCNTs was estimated 11.63 +/- 0.09 JK(-1) mol(-1), and transformation enthalpy Delta(r)H(0) degrees approximately Delta(r)H(298) degrees. The latter agrees satisfactorily with the theoretical calculations for the graphite-MWCNTs transformation. On thermodynamic basis, the transformation becomes spontaneous above 704 +/- 13 K.     

Acid-catalyzed nucleophilic aromatic substitution: experimental and theoretical exploration of a multistep mechanism

The mechanism for the acid-mediated substitution of a phenolic hydroxyl group with a sulfur nucleophile has been investigated by a combination of experimental and theoretical methods. We conclude that the mechanism is distinctively different in nonpolar solvents (i.e., toluene) compared with polar solvents. The cationic mechanism, proposed for the reaction in polar solvents, is not feasible and the reaction instead proceeds through a multistep mechanism in which the acid (pTsOH) mediates the proton shuffling. From DFT calculations, we found a rate-determining transition state with protonation of the hydroxyl group to generate free water and a tight ion pair between a cationic protonated naphthalene species and a tosylate anion. Kinetic experiments support this mechanism and show that, at moderate concentrations, the reaction is first order with respect to 2-naphthol, n-propanethiol, and p-toluenesulfonic acid (pTsOH). Experimentally determined activation parameters are similar to the calculated values (Delta H exp not equal =105+/-9, Delta H calcd not equal =118 kJ mol(-1); Delta G exp not equal =112+/-18, Delta G calcd not equal =142 kJ mol(-1)).     

Reactive intermediates relevant to the carbonylation of CH(3)Mn(CO)(5). Activation parameters for key dynamic processes

Reported is a time-resolved infrared and optical kinetics investigation of the transient species CH(3)C(O)Mn(CO)(4) (I(Mn)) generated by flash photolysis of the acetyl manganese pentacarbonyl complex CH(3)C(O)Mn(CO)(5) (A(Mn)) in cyclohexane and in tetrahydrofuran. Activation parameters were determined for CO trapping of I(Mn) to regenerate A(Mn) (rate = k(CO) [CO][I(Mn)]) as well as the methyl migration pathway to form methylmanganese pentacarbonyl CH(3)Mn(CO)(5) (M(Mn)) (rate = k(M)[I(Mn)]). These values were Delta H(++)(CO) = 31 +/- 1 kJ mol(-1), Delta S(++)(CO) = -64 +/- 3 J mol(-1) K(-1), Delta H(++)(M) = 35 +/- 1 kJ mol(-1), and Delta S(++)(M) = -111 +/- 3 J mol(-1) K(-1). Substantially different activation parameters were found for the methyl migration kinetics of I(Mn) in THF solutions where Delta H(++)(M) = 68 +/- 4 kJ mol(-1) and Delta S(++)(M) = 10 +/- 10 J mol(-1) K(-1), consistent with the earlier conclusion (Boese, W. T.; Ford, P. C. J. Am. Chem. Soc. 1995, 117, 8381-8391) that the composition of I(Mn) is different in these two media. The possible isotope effect on k(M) was also evaluated by studying the intermediates generated from flash photolysis of CD(3)C(O)Mn(CO)(5) in cyclohexane, but this was found to be nearly negligible (k(M)(h)/k(M)(d) (298 K) = 0.97 +/- 0.05, Delta H(++)(M)(d) = 37 +/- 4 kJ mol(-1), and Delta S(++)(M)(d) = -104 +/- 12 J mol(-1) K(-1)). The relevance to the migratory insertion mechanism of CH(3)Mn(CO)(5), a model for catalytic carbonylations, is discussed.     

Hydroxylation of phenolic compounds by a peroxodicopper(II) complex: further insight into the mechanism of tyrosinase

The dicopper(I) complex [Cu2(MeL66)]2+ (where MeL66 is the hexadentate ligand 3,5-bis-{bis-[2-(1-methyl-1H-benzimidazol-2-yl)-ethyl]-amino}-meth ylbenzene) reacts reversibly with dioxygen at low temperature to form a mu-peroxo adduct. Kinetic studies of O2 binding carried out in acetone in the temperature range from -80 to -55 degrees C yielded the activation parameters DeltaH1(not equal) = 40.4 +/- 2.2 kJ mol(-1), DeltaS1)(not equal) = -41.4 +/- 10.8 J K(-1) mol(-1) and DeltaH(-1)(not equal) = 72.5 +/- 2.4 kJ mol(-1), DeltaS(-1)(not equal) = 46.7 +/- 11.1 J K(-1) mol(-1) for the forward and reverse reaction, respectively, and the binding parameters of O2 DeltaH degrees = -32.2 +/- 2.2 kJ mol(-1) and DeltaS degrees = -88.1 +/- 10.7 J K(-1) mol(-1). The hydroxylation of a series of p-substituted phenolate salts by [Cu2(MeL66)O2]2+ studied in acetone at -55 degrees C indicates that the reaction occurs with an electrophilic aromatic substitution mechanism, with a Hammett constant rho = -1.84. The temperature dependence of the phenol hydroxylation was studied between -84 and -70 degrees C for a range of sodium p-cyanophenolate concentrations. The rate plots were hyperbolic and enabled to derive the activation parameters for the monophenolase reaction DeltaH(not equal)ox = 29.1 +/- 3.0 kJ mol(-1), DeltaS(not equal)ox = -115 +/- 15 J K(-1) mol(-1), and the binding parameters of the phenolate to the mu-peroxo species DeltaH degrees(b) = -8.1 +/- 1.2 kJ mol(-1) and DeltaS degrees(b) = -8.9 +/- 6.2 J K(-1) mol(-1). Thus, the complete set of kinetic and thermodynamic parameters for the two separate steps of O2 binding and phenol hydroxylation have been obtained for [Cu2(MeL66)]2+.