Conformations of proline analogues having double bonds in the ring

The intrinsic conformational preferences of proline analogues having double bonds between carbon atoms in their rings have been investigated using quantum mechanical calculations at the B3LYP/6-31+G(d,p) level. For this purpose, the potential energy surface of the N-acety-N'-methylamide derivatives of three dehydroprolines (proline analogues unsaturated at alpha,beta; beta,gamma; and gamma,delta) and pyrrole (proline analogue with unsaturations at both alpha,beta and gamma,delta) have been explored, and the results are compared with those obtained for the derivative of the nonmodified proline. We found that the double bonds affect the ring puckering and the geometric internal parameters, even though the backbone conformation was influenced the most. Results indicate that the formation of double bonds between carbon atoms in the pyrrolidine ring should be considered as an effective procedure to restrict the conformational flexibility of prolines. Interestingly, we also found that the N-acetyl-N'-methylamide derivative of pyrrole shows a high probability of having a cis peptide bond preceding the proline analogue.     

Conformational preferences of beta- and gamma-aminated proline analogues

Quantum mechanical calculations have been used to investigate how the incorporation of an amino group to the Cbeta- or Cgamma-positions of the pyrrolidine ring affects the intrinsic conformational properties of the proline. Specifically, a conformational study of the N-acetyl-N'-methylamide derivatives of four isomers of aminoproline, which differ not only in the beta- or gamma-position of the substituent but also in its cis or trans relative disposition, has been performed. To further understand the role of the intramolecular hydrogen bonds between the backbone carbonyl groups and the amino side group, a conformational study was also performed on the corresponding four analogues of (dimethylamino)proline. In addition, the effects of solvation on aminoproline and (dimethylamino)proline dipeptides have been evaluated using a self-consistent reaction field model, and considering four different solvents (carbon tetrachloride, chloroform, methanol and water). Results indicate that the incorporation of the amino substituent into the pyrrolidine ring affects the conformational properties, with backbone...side chain intramolecular hydrogen bonds detected when it is incorporated in a cis relative disposition. In general, the incorporation of the amino side group tends to stabilize those structures where the peptide bond involving the pyrrolidine nitrogen is arranged in cis. The aminoproline isomer with the substituent attached to the Cgamma-position with a cis relative disposition is the most stable in the gas phase and in chloroform, methanol and water solutions. Replacement of the amino side group by the dimethylamino substituent produces significant changes in the potential energy surfaces of the four investigated (dimethylamino)proline-containing dipeptides. Thus, these changes affect not only the number of minima, which increases considerably, but also the backbone and pseudorotational preferences. In spite of these effects, comparison of the conformational preferences, i.e., the more favored conformers, calculated for different isomers of aminoproline and (dimethylamino)proline dipeptides showed a high degree of consistency for the two families of compounds.     

Conformational profile of a proline-arginine hybrid

The intrinsic conformational preferences of a new nonproteinogenic amino acid have been explored by computational methods. This tailored molecule, named ((β)Pro)Arg, is conceived as a replacement for arginine in bioactive peptides when the stabilization of folded turn-like conformations is required. The new residue features a proline skeleton that bears the guanidilated side chain of arginine at the C(β) position of the five-membered pyrrolidine ring, in either a cis or a trans orientation with respect to the carboxylic acid. The conformational profiles of the N-acetyl-N'-methylamide derivatives of the cis and trans isomers of ((β)Pro)Arg have been examined in the gas phase and in solution by B3LYP/6-31+G(d,p) calculations and molecular dynamics simulations. The main conformational features of both isomers represent a balance between geometric restrictions imposed by the five-membered pyrrolidine ring and the ability of the guanidilated side chain to interact with the backbone through hydrogen bonds. Thus, both cis- and trans-((β)Pro)Arg exhibit a preference for the α(L) conformation as a consequence of the interactions established between the guanidinium moiety and the main-chain amide groups.     

1-amino-2-phenylcyclopentane-1-carboxylic acid: a conformationally restricted phenylalanine analogue

DFT calculations at the B3LYP/6-311G(d,p) level have been used to investigate the intrinsic conformational preferences of 1-amino-2-phenylcyclopentane-1-carboxylic acid (c5Phe), a constrained analogue of phenylalanine in which the alpha and beta carbons are included in a cyclopentane ring. Specifically, the N-acetyl-N'-methylamide derivatives of the cis and trans stereoisomers, where cis and trans refer to the relative position between the amino group and the phenyl ring, have been calculated. Solvent effects have been examined using a self-consistent reaction field (SCRF) method. Results indicate that the conformational space of the cis stereoisomer is much more restricted than that of the trans derivative both in the gas phase and in solution.     

Conformational preferences of proline oligopeptides

A conformational study on the terminally blocked proline oligopeptides, Ac-(Pro)(n)()-NMe(2) (n = 2-5), is carried out using the ab initio Hartree-Fock level of theory with the self-consistent reaction field method in the gas phase and in solutions (chloroform, 1-propanol, and water) to explore the preference and transition between polyproline II (PPII) and polyproline I (PPI) conformations depending on the chain length, the puckering, and the solvent. The mean differences in the free energy per proline of the up-puckered conformations relative to the down-puckered conformations for both diproline and triproline increases for the PPII-like conformations and decreases for the PPI-like conformations as the solvent polarity increases. These calculated results indicate that the PPII-like structures have preferentially all-down puckerings in solutions, whereas the PPI-like structures have partially mixed puckerings. The free energy difference per proline residue between the PPII- and PPI-like structures decreases as the proline chain becomes longer in the gas phase but increases as the proline chain becomes longer in solutions and the solvent polarity increases. In particular, our calculated results indicate that each of the proline oligopeptides can exist as an ensemble of conformations with the trans and cis peptide bonds in solutions, although the PPII-like structure with all-trans peptide bonds is dominantly preferred, which is reasonably consistent with the previously observed results. In diproline Ac-(Pro)(2)-NMe(2), the rotational barrier to the cis-to-trans isomerization for the first prolyl peptide bond increases as the solvent polarity increases, whereas the rotational barrier for the second prolyl peptide bond does not show the monotonic increase as the solvent polarity increases. When the rotational barriers for these two prolyl peptide bonds were compared, it could be deduced that the conformational transition from PPI with the cis peptide bond to PPII with the trans peptide bond is initiated at the C-terminus and proceeds to the N-terminus in water. This is consistent with the results from NMR experiments on polyproline in D(2)O but opposite to the results from enzymatic hydrolysis kinetics experiments on polyproline.     

Effect of proline and glycine residues on dynamics and barriers of loop formation in polypeptide chains

Glycine and proline residues are frequently found in turn and loop structures of proteins and are believed to play an important role during chain compaction early in folding. We investigated their effect on the dynamics of intrachain loop formation in various unstructured polypeptide chains. Loop formation is significantly slower around trans prolyl peptide bonds and faster around glycine residues compared to any other amino acid. However, short loops are formed fastest around cis prolyl bonds with a time constant of 6 ns for end-to-end contact formation in a four-residue loop. Formation of short loops encounters activation energies in the range of 15 to 30 kJ/mol. The altered dynamics around glycine and trans prolyl bonds can be mainly ascribed to their effects on the activation energy. The fast dynamics around cis prolyl bonds, in contrast, originate in a higher Arrhenius pre-exponential factor, which compensates for an increased activation energy for loop formation compared to trans isomers. All-atom simulations of proline-containing peptides indicate that the conformational space for cis prolyl isomers is largely restricted compared to trans isomers. This leads to decreased average end-to-end distances and to a smaller loss in conformational entropy upon loop formation in cis isomers. The results further show that glycine and proline residues only influence formation of short loops containing between 2 and 10 residues, which is the typical loop size in native proteins. Formation of larger loops is not affected by the presence of a single glycine or proline residue.     

Conformational preferences of pseudoproline residues

The conformational study on N-acetyl-N'-methylamides of oxazolidine and thiazolidine residues (Ac-Oxa-NHMe and Ac-Thz-NHMe) is carried out using ab initio HF and density functional B3LYP methods with the self-consistent reaction field method to explore the effects of the replacement of the C(gamma)H(2) group in the prolyl ring by oxygen or sulfur atoms on the conformational preferences and prolyl cis-trans isomerization in the gas phase and in solution (chloroform and water). As the solvent polarity increases, the conformations C with the C7 intramolecular hydrogen bonds become depopulated, the PPII- or PPI-like conformations F become more populated, and the cis populations increase for both Oxa and Thz dipeptides, as found for the Pro dipeptide, although the populations of backbone conformations and puckerings are different in pseudoproline and proline dipeptides. As the increase of solvent polarity, the populations of the trans/up conformations decrease for Oxa and Thz dipeptides, but they increase for the Pro dipeptide. It is found that the cis-trans isomerization proceeds through the anticlockwise rotation with omega' approximately -60 degrees about the oxazolidyl peptide bond and the clockwise rotation with omega' approximately +120 degrees about the thiazolidyl peptide bond in the gas phase and in solution, whereas the clockwise rotation is preferred for the prolyl peptide bond. The pertinent distance d(N...H-N(NHMe)) and the pyramidality of the prolyl nitrogen can describe the role of this hydrogen bond in stabilizing the transition state structure but the lower rotational barriers for Oxa and Thz dipeptides than those for the Pro dipeptide, which is observed from experiments, cannot be rationalized. The calculated cis populations and rotational barriers to the cis-trans isomerization for both Oxa and Thz dipeptides in chloroform and/or water are consistent with the experimental values.     

All-cis helical polypeptides

The possibility of all-cis open-chain polypeptides is rarely addressed, owing to three main reasons, namely, (i) the extreme scarcity of cis peptide bonds in naturally occurring proteins and peptides, (ii) the lesser thermodynamic stability (by about 2.5 kcal/mol) of cis amide bonds with respect to their trans counterparts, and (iii) widely held preconceptions about the so-called "steric clash" between lateral chains borne by two successive alpha carbons. Quantum-chemistry calculations performed on alanine tridecamers show how the latter constraints can be efficiently relieved through proper phi/psi adjustments along the backbone, leading to several helical arrangements--presumably the only permitted regular structures. Four more-or-less regular helices were thus characterized, one of them, a superhelix, exhibiting intramolecular hydrogen bonds. Understanding and anticipating all-cis open-chain structures not only make use of the classical Ramachandran maps at each C alpha i, relating to E = f(phi i,psi i), but also require the profile of a new kind of conformational dependence, the plaque maps, relating to E = f(phi i,psi i-1). The obvious coupling between two such maps enforces conformational dependence between two consecutive C alpha's, somewhat questioning in this context the customary "local effects", and presumably reducing the whole chain plasticity. Whereas cis thermodynamic penalty cannot be abolished locally, energy clues indicate that assembling cis-prepared building units is an exothermic process. Besides, once built up, the all-cis backbone should be difficult to unlock, thus affording reasonable kinetic stability.     

Conformational preferences of proline analogues with different ring size

The conformational study on L-azetidine-2-carboxylic acid (Ac-Aze-NHMe, the Aze dipeptide) and (S)-piperidine-2-carboxylic acid (Ac-Pip-NHMe, the Pip dipeptide) is carried out using ab initio HF and density functional methods with the self-consistent reaction field method to explore the differences in conformational preferences and cis-trans isomerization for proline residue and its analogues with different ring size in the gas phase and in solution (chloroform and water). The change of ring size by deleting a CH2 group from or adding a CH2 group to the prolyl ring results the remarkable changes in backbone and ring structures compared with those of the Pro dipeptide, especially in the C'-N imide bond length and the bond angles around the N-C(alpha) bond. The four-membered azetidine ring can have either puckered structure depending on the backbone structure because of the less puckered structure. The six-membered piperidine ring can adopt chair and boat conformations, but the chair conformation is more preferred than the boat conformation. These calculated preferences for puckering are consistent with experimental results from analysis of X-ray structures of Aze- and Pip-containing peptides. On going from Pro to Aze to Pip, the axiality (i.e., a tendency to adopt the axial orientation) of the NHMe group becomes stronger, which can be ascribed to reduce the steric hindrances between 1,2-substituted Ac and NHMe groups. As the solvent polarity increases, the polyproline II-like conformation becomes more populated and the relative stability of conformation tC with a C7 hydrogen bond between C'=O of the amino group and N-H of the carboxyl group decreases for both the Aze and Pip dipeptides, as seen for the Pro dipeptide. The cis population and rotational barriers for the imide bond increase with the increase of solvent polarity for both the Aze and Pip dipeptides, as seen for the Pro dipeptide. In particular, the cis-trans isomerization proceeds in common through only the clockwise rotation with omega' approximately +120 degrees about azetyl and piperidyl peptide bonds in the gas phase and in solution, as seen for alanyl and prolyl peptide bonds. The pertinent distance d(N...H-N(NHMe)) and the pyramidality of imide nitrogen can describe the role of this hydrogen bond in stabilizing the transition state structure, but the lower rotational barriers for the Aze and Pip dipeptides than those for the Pro dipeptide, which is observed from experiments, cannot be rationalized.     

Intrinsic conformational preferences of C(alpha,alpha)-dibenzylglycine

The intrinsic conformational preferences of C (alpha,alpha)-dibenzylglycine, a symmetric alpha,alpha-dialkylated amino acid bearing two benzyl substituents on the alpha-carbon atom, have been determined using quantum chemical calculations at the B3LYP/6-31+G(d,p) level. A total of 46 minimum energy conformations were found for the N-acetyl- N'-methylamide derivative, even though only nine of them showed a relative energy lower than 5.0 kcal/mol. The latter involves C 7, C 5, and alpha' backbone conformations stabilized by intramolecular hydrogen bonds and/or N-H...pi interactions. Calculation of the conformational free energies in different environments (gas-phase, carbon tetrachloride, chloroform, methanol, and water solutions) indicates that four different minima (two C 5 and two C 7) are energetically accessible at room temperature in the gas phase, while in methanol and aqueous solutions one such minimum (C 5) becomes the only significant conformation. Comparison with results recently reported for C (alpha,alpha)-diphenylglycine indicates that substitution of phenyl side groups by benzyl enhances the conformational flexibility leading to (i) a reduction of the strain of the peptide backbone and (ii) alleviating the repulsive interactions between the pi electron density of the phenyl groups and the lone pairs of the carbonyl oxygen atoms.     

Puckering transition of proline residue in water

The puckering transition of the proline residue with trans and cis prolyl peptide bonds was explored by optimizations along the torsion angle chi1 of the prolyl ring using quantum-chemical methods in water. By analyzing the potential energy surfaces and local minima in water, it is observed that the puckering transition of the proline residue proceeds from a down-puckered conformation to an up-puckered one and vice versa through the transition state with an envelope form having the N atom at the top of the envelope and not a planar one, as seen in the gas phase, although the backbone conformations are different in the gas phase and in water. The barriers to the puckering transition DeltaGup-->down are estimated to be 3.12 and 3.00 kcal/mol for trans and cis conformers at the B3LYP/6-311++G(d,p) level of theory in water, respectively, which are about 1.7 kcal/mol higher than those in the gas phase. Out of 2197 prolines from the 241 high-resolution PDB chains, four transition-state-like structures with the envelope ring puckering are identified. Three of them have the trans prolyl peptide bonds and one has the cis one. The favorable or steric interactions by neighboring residues may be responsible for the stabilization of these transition-state-like ring structures in the proteins.     

Conformational preferences of non-prolyl and prolyl residues

The conformational study on Ac-Ala-NHMe (the alanine dipeptide) and Ac-Pro-NHMe (the proline dipeptide) is carried out using ab initio HF and density functional methods with the self-consistent reaction field method to explore the differences in the backbone conformational preference and the cis-trans isomerization for the non-prolyl and prolyl residues in the gas phase and in the solutions (chloroform and water). For the alanine and proline dipeptides, with the increase of solvent polarity, the populations of the conformation tC with an intramolecular C(7) hydrogen bond significantly decrease, and those of the polyproline II-like conformation tF and the alpha-helical conformation tA increase, which is in good agreement with the results from circular dichroism and NMR experiments. For both the dipeptides, as the solvent polarity increases, the relative free energy of the cis conformer to the trans conformer decreases and the rotational barrier to the cis-trans isomerization increases. It is found that the cis-trans isomerization proceeds in common through only the clockwise rotation with omega' approximately +120 degrees about the non-prolyl and prolyl peptide bonds in both the gas phase and the solutions. The pertinent distance d(N...H-N(NHMe)) can successfully describe the increase in the rotational barriers for the non-prolyl and prolyl trans-cis isomerization as the solvent polarity increases and the higher barriers for the non-prolyl residue than for the prolyl residue, as seen in experimental and calculated results. By analysis of the contributions to rotational barriers, the cis-trans isomerization for the non-prolyl and prolyl peptide bonds is proven to be entirely enthalpy driven in the gas phase and in the solutions. The calculated cis populations and rotational barriers to the cis-trans isomerization for both the dipeptides in chloroform and/or water accord with the experimental values.     

Kinetics and equilibria of cis/trans isomerization of backbone amide bonds in peptoids

The biological activities of N-substituted glycine oligomers (peptoids) have been the subject of extensive research. As compared to peptides, both the cis and trans conformations of the backbone amide bonds of peptoids can be significantly populated. Thus, peptoids are mixtures of configurational isomers, with the number of isomers increasing by a factor of 2 with each additional monomer residue. Here we report the results of a study of the kinetics and equilibria of cis/trans isomerization of the amide bonds of N-acetylated peptoid monomers, dipeptoids, and tripeptoids by NMR spectroscopy. Resonance intensities indicate the cis conformation of the backbone amide bonds of the peptoids studied is more populated than is generally the case for the analogous secondary amide bond to proline residues in acyclic peptides. Rate constants were measured by inversion-magnetization transfer techniques over a range of temperatures, and activation parameters were derived from the temperature dependence of the rate constants. The rate of cis/trans isomerization by rotation around the amide bonds in the peptoids studied is generally slower than that around amide bonds to proline residues and takes place on the NMR inversion-magnetization transfer time scale only by rotation around the amide bond to the C-terminal peptoid residue.     

Unexpectedly fast cis/trans isomerization of Xaa-Pro peptide bonds in disulfide-constrained cyclic peptides

Acyclic dithiol and cyclic disulfide forms of the peptides Ac-Cys-Pro-Xaa-Cys-NH2 (Xaa = Phe, His, Tyr, Gly, and Thr) and Ac-Cys-Gly-Pro-Cys-NH2 and the peptide Ac-Ala-Gly-Pro-Ala-NH2 were synthesized and characterized by mass spectrometry and NMR spectroscopy. Rate constants kct and ktc for cis-to-trans and trans-to-cis isomerization, respectively, across the Cys-Pro or Gly-Pro peptide bonds were determined by magnetization transfer NMR techniques over a range of temperatures, and activation parameters were derived from the temperature dependence of the rate constants. It was found that constraints imposed by the disulfide bond confer an unexpected rate enhancement for cis/trans isomerization, ranging from a factor of 2 to 13. It is proposed that the rate enhancements are a result of an intramolecular catalysis mechanism in which the NH proton of the Pro-Xaa peptide bond hydrogen bonds to the proline nitrogen in the transition state. The peptides Ac-Cys-Pro-Xaa-Cys-NH2 and Ac-Cys-Gly-Pro-Cys-NH2 are model compounds for proline-containing active sites of the thioredoxin superfamily of oxidoreductase enzymes; the results suggest that the backbones of the active sites of the oxidized form of these enzymes may have unusual conformational flexibility.     

Quantum mechanical study of the conformational behavior of proline and 4R-hydroxyproline dipeptide analogues in vacuum and in aqueous solution

The conformational behavior of the title compounds has been investigated by Hartree-Fock, MP2, and DFT computations on the most significant structures related to variations of the backbone dihedral angles, cis/trans isomerism around the peptide bond, and diastereoisomeric puckering of the pyrrolidine ring. In vacuum the reversed gamma turn (gammal), characterized by an intramolecular hydrogen bridge, corresponds to the absolute energy minimum for both puckerings (up and down) of the pyrrolidine ring. An additional energy minimum is found in the helix region, but only for an up puckering of the pyrrolidine ring. When solvent effects are included by means of the polarizable continuum model the conformer observed experimentally in condensed phases becomes the absolute minimum. The down puckering is always favored over its up counterpart, albeit by different amounts (0.4-0.5 kcal/mol for helical structures and about 2 kcal/mol for gammal structures). In helical structures cis arrangements of the peptide bond are only slightly less stable than their trans counterparts. This is no longer true for gammal structures, because the formation of an intramolecular hydrogen bond is possible only for trans peptide bonds. In most cases, proline and hydroxyproline show the same general trends; however, the electronegative 4(R) substituent of hydroxyproline leads to a strong preference for up puckerings irrespective of the backbone conformation.     

β-Phenylproline: the high β-turn forming propensity of proline combined with an aromatic side chain

The conformational propensities of the proline analogue bearing a phenyl substituent attached to the β carbon, in either a cis or a trans configuration relative to the carbonyl group, have been investigated. The behaviour of cis- and trans(βPh)Pro has been compared with that of proline in homochiral and heterochiral dipeptide sequences. NMR and IR studies as well as X-ray diffraction analysis provide evidence that the β-phenyl substituent does not disrupt the tendency of proline to occupy the i+1 position of a β-turn. The puckering of the pyrrolidine ring is significantly affected by the presence of the aromatic substituent, which tends to occupy positions that minimize steric repulsions. As a consequence, this substituent adopts specific well-defined orientations, which are more restricted for the cis derivative. Interactions between this aromatic group and that in the adjacent phenylalanine residue may be responsible for some of the conformational differences observed among the different peptides studied.     

Puckering transition of 4-substituted proline residues

The puckering transition of 4-substituted proline residues by electron-withdrawing groups, i.e., 4(R)-hydroxy-L-proline (Hyp) and 4(R)-fluoro-L-proline (Flp) residues, with trans and cis prolyl peptide bonds was studied by adiabatic optimizations along the torsion angle chi1 of the prolyl ring at the HF/6-31+G(d) level. By analyzing the potential energy surface and local minima, it is observed that the puckering transition of the prolyl ring for Hyp and Flp residues proceeds from a down-puckered conformation to an up-puckered one through the transition state with an envelope form having the N atom at the top of envelope and not a planar one for both trans and cis conformers, which is the same as found for the unsubstituted proline residue. At HF/6-31+G(d) and B3LYP/6-311++G(d,p) levels, the structures of the backbone and prolyl ring for local minima of Ac-Hyp-NHMe and Ac-Flp-NHMe are quite similar to those of Ac-Pro-NHMe. However, the relative stability of the up-puckered conformation to the down-puckered one is increased for Ac-Hyp-NHMe with the cis imide bond and for Ac-Flp-NHMe with the trans and cis imide bonds. In particular, the 4(R)-substitution by hydroxy and fluorine groups has brought some structural changes in the prolyl ring of the transition states and the changes in barriers for the puckering transition. The puckering transitions for Ac-Hyp-NHMe and Ac-Flp-NHMe are proven to be predominantly electronically driven by analyzing the electronic and enthalpic contributions to the barriers, as seen for Ac-Pro-NHMe.     

Impact of azaproline on Peptide conformation

The amino acid analog azaproline (azPro) contains a nitrogen atom in place of the C(alpha) of proline. Peptides containing azPro were shown to stabilize the cis-amide conformer for the acyl-azPro bond and prefer type VI beta-turns both in crystals and in organic solvents by NMR. The increased stability for cis-amide conformers was relatively minor with respect to the trans-conformers. Further, their conformational preferences were depended on solvent. To elucidate the impact of azPro substitution on amide cis-trans isomerism and peptide conformation, this paper reports ab initio studies on azPro derivatives and a comparison with their cognate Pro derivatives: 1-acetyl-2-methyl pyrrolidine (1), 1-acetyl-2-methyl pyrazolidine (2), Ac-Pro-NHMe (3), Ac-azPro-NHMe (4), Ac-azPro-NMe(2) (5), Ac-azAzc-NHMe (6), and Ac-azPip-NHMe (7). Conformational preferences were explored at the MP2/6-31+G** level of theory in vacuo. Solvation effects for 1 and 2 were studied implicitly using the polarizable continuum model and explicitly represented by interactions with a single water molecule. An increase in the conformational preference for the cis-amide conformer of azPro was clearly seen. An intramolecular hydrogen bond occurred solely in the trans-amide conformer that reduced the preference for the cis-conformer by 2.2 kcal/mol. The larger ring homolog aza-pipecolic acid (azPip), in which this internal hydrogen bond was diminished, significantly augmented stabilization of the cis-amide conformer. In aqueous solution, the preference for the cis-amide conformers was greatly reduced, mainly as a result of interaction between water and the lone pair of the alpha-nitrogen in the trans-amide conformer that was 3.8 kcal/mol greater than that in the cis-conformer. In the azPro analog, the energy barrier for cis-trans amide isomerization was 6 kcal/mol less than that in the cognate Pro derivative. Because the azPro derivatives can stabilize the cis-amide bond and mimic a type VI beta-turn without incorporation of additional steric bulk, such a simple chemical modification of the peptide backbone provides a useful conformational constraint when incorporated into the structure of selected bioactive peptides. Such modifications can scan receptors for biological recognition of reverse turns containing cis-amide bonds by the incorporation of type VI beta-turn scaffolds with oriented appended side chains.     

Residual dipolar couplings in short peptides reveal systematic conformational preferences of individual amino acids

Residual dipolar couplings (RDCs) observed by NMR in solution under weak alignment conditions can monitor average net orientations and order parameters of individual bonds. By their simple geometrical dependence, RDCs bear particular promise for the quantitative characterization of conformations in partially folded or unfolded proteins. We have systematically investigated the influence of amino acid substitutions X on the conformation of unfolded model peptides EGAAXAASS as monitored by their (1)H(Nu)-(15)N and (1)H(alpha)-(13)C(alpha) RDCs detected at natural abundance of (15)N and (13)C in strained polyacrylamide gels. In total, 14 single amino acid substitutions were investigated. The RDCs show a specific dependence on the substitution X that correlates to steric or hydrophobic interactions with adjacent amino acids. In particular, the RDCs for the glycine and proline substitutions indicate less or more order, respectively, than the other amino acids. The RDCs for aromatic substitutions tryptophane and tyrosine give evidence of a kink in the peptide backbone. This effect is also observable for orientation by Pf1 phages and corroborated by variations in (13)C(alpha) secondary shifts and (3)J(HNH)(alpha) scalar couplings in isotropic samples. RDCs for a substitution with the beta-turn sequence KNGE differ from single amino acid substitutions. Terminal effects and next neighbor effects could be demonstrated by further specific substitutions. The results were compared to statistical models of unfolded peptide conformations derived from PDB coil subsets, which reproduce overall trends for (1)H(Nu)-(15)N RDCs for most substitutions, but deviate more strongly for (1)H(alpha)-(13)C(alpha) RDCs. The outlined approach opens the possibility to obtain a systematic experimental characterization of the influence of individual amino acid/amino acid interactions on orientational preferences in polypeptides.     

First-principle computational study on the full conformational space of L-threonine diamide, the energetic stability of cis and trans isomers

First-principle computations were carried out on the conformational space of trans and cis peptide bond isomers of HCO-Thr-NH2. Using the concept of multidimensional conformational analysis (MDCA), geometry optimizations were performed at the B3LYP/6-31G(d) level of theory, and single-point energies as well as thermodynamic functions were calculated at the G3MP2B3 level of theory for the corresponding optimized structures. Two backbone Ramachandran-type potential energy surfaces (PESs) were computed, one each for the cis and trans isomers, keeping the side chain at the fully extended orientation (chi1=chi2=anti). Similarly, two side chain PESs for the cis and trans isomers were generated for the (phi=psi=anti) orientation corresponding to approximately the betaL backbone conformation. Besides correlating the relative Gibbs free energy of the various stable conformations with the number of stabilizing hydrogen bonds, the process of trans-->cis isomerization is discussed in terms of intrinsic stabilities as measured by the computed thermodynamic functions.