The stability and electronic properties of wurtzite and zinc-blende ZnS nanowires

The stability and electronic properties of the pristine wurtzite (WZ) and zinc-blende (ZB) structural ZnS nanowires are investigated and compared by using first-principles approaches. It shows that the WZ-ZnS nanowire is more stable energetically than the ZB-ZnS nanowire. The two kinds of ZnS nanowires have different electronic properties due to both the quantum confinement effect and the surface effect. The band gaps of pristine WZ nanowires become larger than that of the corresponding bulk ZnS, while those of ZB nanowires are smaller. The electronic properties of the hydrogen-passivated WZ-ZnS and ZB-ZnS nanowires are further calculated. The underlying physical reason for their energetic and electronic structures is elucidated.     

Raman scattering study of molecules adsorbed on ZnS nanocrystals

The adsorption of 4‐mercaptopyridine (4‐Mpy) molecules on ZnS nanocrystals was investigated by means of Raman spectroscopy. We compared the Raman signals of 4‐Mpy molecules adsorbed on ZnS nanocrystals and Ag substrate. The differences in the adsorption of 4‐Mpy molecules on the semiconductor and the metal substrate were noted. The results demonstrated that adsorbed species on the semiconductor ZnS nanocrystals can be detected by Raman spectroscopy. Copyright © 2006 John Wiley & Sons, Ltd.     

氧化锌/硫化锌异质纳米线结构和电子性质比较研究

用第一性原理方法系统研究氧化锌/硫化锌超晶格纳米线和核壳结构纳米线的结构和电子性质.结构优化后,氧化锌/硫化锌异质结构纳米线和纯氧化锌或硫化锌纳米线结构相似.对于两种异质结构纳米线,能带结构显示他们都是直接带隙半导体.对于氧化锌/硫化锌超晶格纳米线,随着径向厚度的增加,能带变的越来越水平.对于核壳结构纳米线,分波态密度显示它们都是Ⅱ型异质结构.研究有助于理解这类异质结构纳米线以及它们在电子发动机及光伏设备方面的应用.     

Formation of the atom-vacated state of a zinc sulfide surface upon adsorption of hydrogen atoms

Experimental results are cited according to which the adsorption of hydrogen atoms into ZnS produces an atom-vacated state of the surface of a solid body. The consequences of an AVS are: anomalously rapid vaporization of ZnS (T> 500°K), sputtering of ZnS on recombination of the H atoms (T=300–500°K), a high rate of diffusion of impurities and adsorbed H atoms, and the initiation of self-oscillations of a number of absorbed H atoms.Translated from Izvestiya Vysshikh Uchebnykh Zavedenii, Fizika, No. 7, pp. 5–10, July, 1986.The author wishes to thank M. D. Nurhanov for his assistance in this work.     

碱金属修饰的多孔石墨烯的储氢性能

基于第一性原理深入研究了碱金属原子(Li,Na,K)修饰的多孔石墨烯(PG)体系的储氢性能,并且通过从头算分子动力学模拟了温度对Li-PG吸附的H2分子稳定性的影响.研究结果表明,PG结构的碳环中心是碱金属原子最稳定的吸附位置,PG单胞最多可以吸附4个碱金属原子,Li原子被束缚最强,金属原子间无团聚的倾向;H2分子通过极化机制吸附在碱金属修饰的PG结构上,每个金属原子周围最多可以稳定地吸附3个H2分子;Li-PG对H2分子的吸附最强(平均吸附能为-0.246 eV/H2),Na-PG对H2分子的吸附较弱(平均吸附能为-0.129 eV/H2),K-PG对H2分子的吸附最弱(平均吸附能为-0.056 eV/H2),不适合用做储氢材料;在不考虑外界压强且温度为300 K的情况下,Li-PG结构可稳定地吸附9个H2分子,储氢量为9.25 wt.%;在400 K时,有7个吸附H2分子脱离Li-PG的束缚,在600-700 K的范围内,吸附H2分子全部脱离了Li-PG体系的束缚.     

硫化锌纳米管稳定性、电子性质和磁性质的比较研究

用第一性原理方法系统地研究硫化锌纳米管的稳定性、电子性质和掺杂磁性质.比较三种纳米管的稳定性.研究表明,六边形截面的双壁管的稳定性最高,相同截面的单壁管稳定性次之,而圆截面的之字形和扶手椅纳米管稳定性最低.电子能带结构计算表明它们都是直接带隙半导体.纳米管表面氢吸附后,六边形截面的单壁管转变为间接带隙半导体.研究了磁性原子掺杂六边形截面管的磁性质.发现掺杂纳米管的形成能比纯纳米管的形成能低,说明掺杂过程是一个放热反应.纳米管的总磁矩等于掺杂的磁性原子的磁矩.这些单掺杂纳米管在可调磁的新材料方面有潜在的应用价值.     

First-principles study of palladium atom adsorption on the boron- or nitrogen-doped carbon nanotubes

We have performed first-principles calculation to investigate the adsorption of a single palladium atom on the surface of the pristine and boron- or nitrogen-doped carbon nanotubes (CNTs). The results show that for the adsorption of a single palladium atom on the pristine CNT surface, the most stable site is Bridge1 site above the axial carbon–carbon bond. Either boron- or nitrogen-doped CNTs can assist palladium surface adsorption, but the detailed mechanisms are different. The enhanced palladium adsorption on boron-doped CNT is attributed to the palladium d orbital strongly hybridized with both boron p orbital and carbon p orbital. The enhancement in palladium adsorption on nitrogen-doped CNT results from activating the nitrogen-neighboring carbon atoms due to the large electron affinity of nitrogen. Furthermore, the axial bond is preferred over the zigzag bond for a palladium atom adsorbed on the surface of all three types of CNTs. The most energetically favorable site for a palladium atom adsorbed on three types of CNTs is above the axial boron–carbon bond in boron-doped CNT. The enhancement in palladium adsorption is more significant for the boron-doped CNT than it is for nitrogen-doped CNT with a similar configuration. So we conclude that accordingly, the preferred adsorption site is determined by the competition between the electron affinity of doped and adsorbed atoms and preferred degree of the axial bond over the zigzag bond.     

Electronic structure of twinned ZnS nanowires

The electronic properties of twinned ZnS nanowires (NWs) with different diameters were investigated based on first-principles calculations. The energy band structures, projected density of states and the spatial distributions of the bottom of conduction band and the top of the valence band were presented. The results show that the twinned nanowires exhibit a semiconducting character and the band gap decreases with increasing nanowire diameter due to quantum confinement effects. The valence band maximum and conduction band minimum originate mainly from the S-p and Zn-s orbitals at the core of the nanowires, respectively, which was confirmed by their spatial charge density distribution. We also found that no heterostructure is formed in the twinned ZnS NWs since the valence band maximum and conduction band minimum states are distributed along the NW axis uniformly. We suggest that the hexagonal (2H) stacking inside the cubic (3C) stacking has no effect on the electronic properties of thin ZnS NWs.     

基于密度泛函理论研究掺杂Pd石墨烯吸附O2及CO

基于第一性原理的密度泛函理论研究了单个O₂和CO气体分子吸附于本征石墨烯和掺杂钯(Pd)的石墨烯的体系, 通过石墨烯掺Pd前后气体分子的吸附能、电荷转移及能带和态密度的计算, 发现掺Pd后气体分子吸附能和电荷转移显著增大, 这是由于Pd的掺杂, 在本征石墨烯能带中引入了杂质能级, 增强了石墨烯和吸附气体分子间的相互作用; 氧化性气体O₂和还原性气体CO吸附对石墨烯体系能带结构和态密度的影响明显不同, 本征石墨烯吸附O₂后, 费米能级附近态密度变大, 掺Pd后在一定程度变小; 吸附还原性的CO后, 石墨烯费米能级附近态密度几乎没有改变, 表明掺杂Pd不会影响石墨烯对CO的气体灵敏度, 但由于CO对石墨烯的吸附能增大, 可以提高石墨烯对还原性气体的气敏响应速度.     

Field emission and photoluminescence characteristics of ZnS nanowires via vapor phase growth

Large-area ZnS nanowires were synthesized through a vapor phase deposition method. X-ray diffraction and electron microscopy results show that the products are composed of single crystalline ZnS nanowires with a cubic structure. The nanowires have sharp tips and are distributed uniformly on silicon substrates. The diameter of the bases is in the range of 320-530 nm and that of the tips is around 20-30 nm. The strong ultraviolet emission in the photoluminescence spectra also demonstrates that the ZnS nanowires are of high crystalline perfection. Field emission measurements reveal that the ZnS nanowires have a fairly low threshold field, which may be ascribed to their very sharp tips, rough surfaces and high crystal quality. The perfect field emission ability of the ZnS nanowires makes them a promising candidate for the fabrication of flexible cold cathodes.     

The structure and photoluminescence properties of TiO<Subscript>2</Subscript>-coated ZnS nanowires

The structure and photoluminescence properties of TiO₂-coated ZnS nanowires were investigated. ZnS nanowires were synthesized by thermal evaporation of ZnS powder and then coated with TiO₂ by using the metal organic chemical vapor deposition (MOCVD) technique. We performed scanning electron microscopy, transmission electron microscopy (TEM), X-ray diffraction (XRD), energy-dispersive X-ray spectroscopy, and photoluminescence (PL) spectroscopy to characterize the as-synthesized and TiO₂-coated ZnS nanowires. TEM and XRD analyses revealed that the ZnS core and the TiO₂ coatings had crystalline zinc blende and crystalline anatase structures, respectively. PL measurement at room temperature showed that the as-synthesized ZnS nanowires had two emissions: a blue emission centered in the range from 430 to 440 nm and a green emission at around 515 nm. The green emission was found to be dominant in the ZnS nanowires coated with TiO₂ by MOCVD at 350°C for one or more hours, while the blue emission was dominant in the as-synthesized ZnS nanowires. Also the mechanisms of the emissions were discussed.     

Raman spectroscopy of ZnS nanostructures

We report Raman scattering results of wurtzite ZnS nanowires, nanocombs, and nanobelts. The Raman spectrum obtained from ZnS nanowires exhibits first‐order phonon modes at 272, 284, and 350 cm⁻¹, corresponding to A₁/E₁ transverse optical, E₂ transverse optical, and A₁/E₁ longitudinal optical phonons, respectively. Several multiphonon modes are also observed. The longitudinal optical phonon mode varies in wavenumber for nanocombs and nanobelts, indicating that the residual strain varies during the morphological change from ZnS nanowires to nanocombs and ultimately to nanobelts. Interestingly, a surface optical (SO) phonon mode varies in wavenumber depending on the shape and surface roughness of the ZnS nanostructures. The surface modulation wavelengths of the ZnS nanowires, nanocombs, and nanobelts are estimated using the SO phonon dispersion relations and the observed SO phonon wavenumbers. Copyright © 2012 John Wiley & Sons, Ltd.     

真空热蒸发制备CdS/ZnS核/壳异质结纳米线

将传统的真空热蒸发镀膜实验加以改进,先以催化剂辅助蒸发制备出CdS纳米线,再将其作为模板,以ZnS为蒸发源物质,二次蒸发包覆ZnS层,成功制备出大量的CdS/ZnS核/壳异质结纳米线.经X射线衍射、X射线能量色散谱、透射电镜分析表明,所得CdS/ZnS异质结纳米线的核心部分为CdS单晶纳米线,外层为ZnS多晶层.本文的实验方法简便易行,所得纳米结构在光电纳米器件领域有一定应用前景.     

H2O在Al(111)表面吸附的量子化学研究

用量子化学从头算方法，以原子族Ａｌ１０模拟表面，研究了水在Ａｌ（１１１）表面上不同吸附拉的吸附情况，计算得到了稳定的吸附构型和结合能，结果表明：顶位是其最佳吸附位，而且水在表面能以两种取向被吸附，距表面较远时，Ｈ端靠近表面，然后跨过一能垒到达最佳吸附位，此时氧端靠近表面。在吸附过程中，水向表面转移电荷，导致表面功函降低，在氧原子不加极化函数进，水分子的二次轴垂直于表面时能量最低；当考虑中氧的ｄ轨道     

Heats of interaction of hydrogen with gold and platinum powders and its effect on the subsequent adsorptions of oxygen and noble gases

Exposure of pure gold powders to hydrogen flow at 125 °C and atmospheric pressure causes heat evolution accompanied by hydrogen adsorption. The exposure takes place in a flow-through microcalorimeter, in which the metal powders are purged by nitrogen flow used as an inert carrier gas. The adsorbed hydrogen is slowly desorbed by nitrogen flow. The heats of hydrogen adsorption and its uptake by the gold powder are greatly increased by its sequential treatments with micromole quantities of oxygen and noble gases, such as helium and argon. This increase does not take place if the gold treatment is confined only to oxygen, or only to pure noble gases. The radically increased hydrogen adsorption by gold is caused by a combination of its treatments with oxygen and the noble gases. Similar results were obtained with pure platinum powder exposed to hydrogen at room temperatures. Gold powder containing adsorbed hydrogen reacts very strongly with molecular oxygen/argon mixtures, generating heats of adsorption several times higher than the heat of formation of water. The heat evolution is very rapid and is not accompanied by the formation of water. These intense interactions are not observed after complete desorption of hydrogen from the gold surfaces.     

气体吸附对硅锗异质结纳米线电子结构与光学性质的影响

基于密度泛函理论体系下的广义梯度近似(GGA),采用第一性原理方法探讨了沿[112]晶向的硅锗异质结纳米线作为气体传感器检测CO,CO₂和Cl₂的能力,着重计算了其吸附气体分子前后的吸附能、能带结构与光学性质.几何结构优化计算表明：不同硅锗组分的[112]晶向的硅锗纳米线对CO,CO₂和Cl₂分子的吸附能的绝对值在0.001 eV至1.36 eV之间,其中Si₂₄Ge₃₆H₃₂对CO₂气体的吸附能最大,气敏性能最好.能带结构计算表明：吸附CO和CO₂分子的[112]晶向硅锗纳米线能带的简并度明显减小,带隙变化较小;而吸附Cl₂分子后的价带顶与导带底之间产生了杂质能级使其带隙减小.光学性质计算表明：Si₂₄Ge₃₆H₃₂纳米线吸附CO, CO₂和Cl₂分子后的光学...     

Geometric stability and adsorption property of hydroxyl group on graphene sheets

The stable geometrics and adsorption behaviors of hydroxyl (OH) groups on graphene sheets are investigated using the first-principles calculations. The single hydroxyl adatom has small adsorption energy and diffusion barrier on pristine graphene. The binding strength of the hydroxyl group increases with the coverage, and the aggregations of the hydroxyl groups reduce the structural bucking of graphene sheet. On the graphene with single vacancy (SV-graphene), the large trapping zones mean the adsorbed OH would be easily trapped at the vacancy site. The hydroxyl groups prefer to aggregate on graphene surfaces and form the water molecule, leaving the epoxy group on pristine graphene or oxygen dopant in SV-graphene, which is used to constitute the structural model of oxidized graphene. These results would provide us a useful reference to understand the atomic structure and adsorption property of functional groups on graphene sheets.     

Theoretical Studies on Interaction Between Methanol and Functionalized Single-Walled Carbon Nanotubes

We study the adsorption of a methanol molecule on single-walled carbon nanotubes (SWCNTs) with various diameters and chiral angles by using the density functional theory based calculations. We find that methanol prefers to be adsorbed physically on the exterior surface of chiral nanotubes in comparison to the armchair and zigzag tubes with binding energy of about-2.76 kcal/mol, which is consistent with recent experimental andtheoretical investigation results. We further consider the adsorption of methanol on the exterior surface and edge site of functionalized SWCNTs. The obtained results indicate that the binding energy of methanol is significantly increased for adsorption on the sidewall of functionalized nanotubes. It is also found that the adsorption of methanol at the edge site of both functionalizedand pristine SWCNT is remarkably different (chemisoption process) incomparison to the exterior sidewall of the tubes. Furthermore, the electronic structures and Mulliken charge population of the considered complexes at their ground state are discussed within the context.     

H2S在Fe(100)面吸附的第一性原理研究

基于密度泛函理论第一性原理, 在广义梯度近似下, 研究了表面覆盖度为0.25 ML (monolayer)时硫化氢分子在Fe(100)面吸附的结构和电子性质, 并与单个硫原子吸附结果进行了对比. 结果表明: 硫化氢分子吸附在B2位吸附能最小为-1.23 eV, 最稳定, B1位吸附能最大为-0.01 eV, 最不稳定; 并对硫化氢分子在B1位和B2位吸附后的电子态密度进行了分析, 也表明了吸附在B2位稳定, 且吸附在B2位后硫化氢分子几何结构变化不大; 将硫化氢中硫原子吸附与单个硫原子吸附的电子性质进行了比较, 发现前者吸附作用非常微弱; 同时对吸附后的Fe(100)面进行了对比, 单个硫原子吸附的Fe(100)面电子态密度出现了一系列峰值且离散分布, 生成了硫化亚铁, 表明在硫化氢环境下, 主要是硫化氢析出的硫原子发生了吸附. 关键词： 第一性原理 Fe(100)表面 吸附能 硫化氢     

A Z-scheme CuO–ZnO–ZnS–CuS quaternary nanocomposite for solar-light-driven photocatalytic performance

A quaternary CuO–CuS–ZnO–ZnS nanocomposite was successfully synthesized via a facile microwave irradiation based on the preprepared ZnS and CuO nanoparticles. CuO–CuS–ZnO–ZnS nanocomposite was a porous photocatalyst, providing excellent adsorption performance. It was sensitive to both ultraviolet and visible light, moreover, the photoelectrochemical measurements confirmed that there was a high separation rate and low recombination rate of photo-generated charge carriers in the nanocomposite, endowing excellent photocatalytic activity in the sunlight. Under the simulated solar light irradiation, the removal efficiency of rhodamine B (RhB) pollutant (30 mg/L) over CuO–CuS–ZnO–ZnS nanocomposite was 33.98 and 2.90 times of pristine CuO and ZnS, respectively. The outstandingt photocatalytic performance was attributed to Z-scheme charge transfer path.