Mechanochemical preparation of hydrogen-bonded adducts between the diamine 1,4-diazabicyclo[2.2.2]octane and dicarboxylic acids of variable chain length: an X-ray diffraction and solid-state NMR study

Mechanical mixing of solid dicarboxylic acids of variable chain length HOOC(CH(2))(n)COOH (n = 1-7) with solid 1,4-diazabicyclo[2.2.2]octane generates the corresponding salts or co-crystals of the formula [N(CH(2)CH(2))(3)N]-H-[OOC(CH(2))(n)COOH] (n=1-7). Preparation of the same systems from solution has been instrumental for a full characterization of the mechanochemical products by means of single-crystal and powder-diffraction X-ray analyses, as well as by solid-state NMR. The acid-base adducts, whether involving proton transfer from the COOH group to the N-acceptor, that is having ((-))O...H-N((+)) interactions, or the formation of neutral O-H...N hydrogen bonds, show a melting point alternation phenomenon analogous to that shown by the neutral carboxylic acids. The carbon chemical shift tensors of the COOH group obtained from the sideband intensity of low speed spinning NMR spectra provide a reliable criterion for assigning the protonation state of the adducts.     

Gallane complexes with amido-amine ligands

Gallane complexes bearing amido-amine ligands -N(R)CH2CMe2CH2NMe2 [R = H or SiMe3 (TMS)], (H2Ga[N(H)CH2CMe2CH2NMe2])2, 1, H2Ga[N(TMS)CH2CMe2CH2NMe2], 2, (H(Cl)Ga[N(H)CH2CMe2CH2NMe2])2, 3, ([(TMS)2N](H)Ga[N(H)CH2CMe2CH2NMe2])2, 4, and HGa[N(TMS)CH2CMe2CH2NMe2]2, 5, were synthesized from the reactions of the quinuclidine adducts of mono- and dichlorogallane with the corresponding lithium amides. Structural determinations of compounds 1, 3, and 4 showed all were dimeric with bridging amido groups. Rather than bond to gallium the tertiary amine groups in 1 and 4 were hydrogen-bonded to the amino N-H. In the structure of compound 3 the amine group occupied an axial position in the trigonal bipyramidal geometry of the five-coordinate gallium. The results were rationalized in terms of the steric and electronic properties of gallium ligands.     

Insertion, reduction, and carbon-carbon coupling induced by monomeric aluminum hydride compounds bearing substituted pyrrolyl ligands

A monomeric aluminum hydride complex bearing substituted pyrrolyl ligands, AlH[C(4)H(3)N(CH(2)NMe(2))-2](2) (1), was synthesized and structurally characterized. To further confirm the presence of Al--H bonds, the compound AlD[C(4)H(3)N(CH(2)NMe(2))-2](2) ([D]1) was synthesized by reacting LiAlD(4) with [C(4)H(4)N(CH(2)NMe(2))-2]. Compound 1 and [D]1 react with phenyl isothiocyanate yielding Al[C(4)H(3)N(CH(2)NMe(2))-2](2)[eta(3)-SCHNPh] (2) and Al[C(4)H(3)N(CH(2)NMe(2))-2](2)[eta(3)-SCDNPh] ([D]2) by insertion. The reactions of 1 with 9-fluorenone and benzophenone generated the unusual aluminum alkoxide complexes 3 and 4, respectively, through intramolecular proton abstraction and C-C coupling. A mechanistic study shows that 9-fluorenone coordinates to [D]1 and releases one equivalent of HD followed by C-C coupling and hydride transfer to yield the final product. Reduction of benzil with 1 affords aluminum enediolate complex 5 in moderate yield. Mechanistic studies also showed that the benzil was inserted into the aluminum hydride bond of [D]1 through hydroalumination followed by proton transfer to generate the final product [D]5. All new complexes have been characterized by (1)H and (13)C NMR spectroscopy and X-ray crystallography.     

Lower Rim-Upper Rim Hydrogen-Bonded Adducts of Calix[4]arenes

An upper-rim-substituted calix[4]arene tetracarboxylic acid forms hydrogen-bonded duplexes with lower-rim-substituted tetra(4-pyridyl)- and tetra(3-pyridyl)calix[4]arenes in chloroform. The formation of these adducts was studied by extraction experiments. The association constants determined via (1)H NMR dilution experiments in CDCl(3) are 7.6 x 10(3) and 1.3 x 10(3) M(-1) for the 4-pyridyl and the 3-pyridyl derivative, respectively. IR studies in the solid state and in solution indicate that the interaction is based on hydrogen bonding and that the degree of proton transfer is negligible. VPO measurements support the formation of 1:1 adducts.     

Synthesis and Biological Evaluation of Some Novel N,N ′-Bis-(1,2,4-Triazin-4-Yl)Dicarboxylic Acid Amides and Some Fused Rings with 1,2,4-Triazine Ring

Some of novel N , N '-bis-(1,2,4-triazin-4-yl)dicarboxylic acid amides ( 2-5 ) and thiadiazolo[2,3- b ][1,2,4]triazin-7-yl carboxylic acid derivatives ( 6 , 7 ) were prepared by heating 4-amino-6-methyl-5-oxo-3-thioxo-2,3,4,5-tetrahydro-1,2,4-triazine ( 1 ) with different dicarboxylic acids (oxalic, malonic, fumaric, maleic, succinic, and phthalic acids respectively) in POCl 3 . Refluxing 1 with 1-chloro-2,4-dinitrobenzene in DMF yielded 3-methyl-6-nitro-10 H -benzo[1,2,4]thiadiazino[2,3- c ][1,2,4]triazin-4-one ( 8 ). Condensation of 1 with 2,4-pentandione in refluxing acetic acid furnished 6-methyl-4-(1-methyl-3-oxobut-1-enylamino)-3-thioxo-3,4-dihydro-2 H -[1,2,4]triazin-5-one ( 9 ). 3,8-D imethyl[1,2,4] triazino[3,4- b ][1,3,4]thiadiazine-4,7-dione ( 11 ) was prepared by refluxing 1 with 2-bromopropionyl bromide in anhydrous benzene to afford the corresponding N -acetylated derivative 10 , which was cyclized by using triethylamine. Also, some triazinylquinazolinones 13a , b were obtained by fusion of 1 with 6-bromo(and/or 6,8-dibromo)-2-methyl-3,1-benzoxazin-4 H -ones.     

Derivatization of protonated peptides via gas phase ion—molecule reactions with acetone

The protonated [M + H]+ ions of glycine, simple glycine containing peptides, and other simple di- and tripeptides react with acetone in the gas phase to yield [M + H + (CH3)2CO]+ adduct ion, some of which fragment via water loss to give [M + H + (CH3)2CO - H2O]+ Schiff's base adducts. Formation of the [M + H + (CH3)2CO]+ adduct ions is dependent on the difference in proton affinities between the peptide M and acetone, while formation of the [M + H + (CH3)2CO - H2O]+ Schiff's base adducts is dependent on the ability of the peptide to act as an intramolecular proton "shuttle." The structure and mechanisms for the formation of these Schiff's base adducts have been examined via the use of collision-induced dissociation tandem mass spectrometry (CID MS/MS), isotopic labeling [using (CD3)2CO] and by comparison with the reactions of Schiff's base adducts formed in solution. CID MS/MS of these adducts yield primarily N-terminally directed a- and b-type "sequence" ions. Potential structures of the b1 ion, not usually observed in the product ion spectra of protonated peptide ions, were examined using ab initio calculations. A cyclic 5 membered pyrrolinone, formed by a neighboring group participation reaction from an enamine precursor, was predicted to be the primary product.     

Steric control over the formation of cis and trans bis-chelated palladium(II) complexes using a new series of flexible N,P pyridyl-phosphine ligands

The deprotection of phosphonium chloride salts [PR2(CH2OH)2]+Cl- and subsequent condensation reaction with N-methyl-2-aminopyridine has been carried out to give a series of ligands of the form PR2CH2N(CH3)C5H4N (R=Ph , Cy , t-Bu ) which have been fully characterised either as the pure ligand () or the air stable borane adducts (R=Cy , t-Bu ). The 1:1 reactions of , and with PdCl2(COD) gave the N,P chelate complexes [Pd{PR2CH2N(CH3)C5H4N}Cl2]; the Cy () and t-Bu () complexes were characterised by X-ray crystallography. The bisligated species [Pd{PCy2CH2N(CH3)C5H4N}2Cl2] () was obtained when the reaction was carried out at higher temperatures and the ligands were found to be coordinated to the metal in a trans configuration through the phosphorus donors. Abstraction of the chlorides from the bis-ligated species , using silver salts, resulted in the coordination of the pyridine ring forming the bis-chelate complex [Pd{PCy2CH2N(CH3)C5H4N}2]2+. In comparison, the palladium bis-chelate complex of ligand [Pd{PPh2CH2N(CH3)C5H4N}2]2+ () was shown to form in a cis configuration and was fully characterised by X-ray crystallography.     

Synthesis and structure of cyclic phosphate, phosphoramidate, phosphonates, and phosphonium salts. Phosphatrane formation

Reaction of tris(2-hydroxy-3,5-dimethylbenzyl)amine (6) with phosphorus reagents led to the formation of the phosphoramidate, N[CH2(Me2C6H2)O]2PO (1), the phosphate N[CH2(Me2C6H2)O]2[CH2(Me2C6H2)OH]P(O)(OPh) (2), the phosphonium salts N[CH2(Me2C6H2)O]3PMe+I- (3A) and N[CH2(Me2C6H2)O]3PMe+I3- (3B), and the phosphonates N[CH2(Me2C6H2)O]2[CH2(Me2C6H2)OH]P(O)Me (4) and N[CH2(Me2C6H2)O]2[CH2(Me2C6H2)OSiMe3]P(O)Me (5). X-ray analysis provided molecular structures for all of the compounds. The solid-state structural representations were supported in solution by an analysis of the NCH2 proton NMR patterns. The structures of 3A and 3B show the presence of phosphatranes with weak P-N donor interactions. These represent the first phosphatranes containing all six-membered rings. Variable temperature analysis of the 1H NMR spectra of 3A indicates fluxional behavior whereby a racemic mixture of the chiral phosphonium salt rapidly intraconverts at room temperature. The activation energy for the enantiomeric conversion of the clockwise and anticlockwise orientations of the propeller-like phosphatrane is 11.2 kcal/mol, which is compared to that of the isoelectronic silatrane N[CH2(Me2C6H2)O]3SiMe (E), 10.3 kcal/mol.     

The remarkable reactivity of high oxidation state ruthenium and osmium polypyridyl complexes

There is a remarkable redox chemistry of higher oxidation state M(IV)-M(VI) polypyridyl complexes of Ru and Os. They are accessible by proton loss and formation of oxo or nitrido ligands, examples being cis-[RuIV(bpy)2(py)(O)]2+ (RuIV=O2+, bpy=2,2'-bipyridine, and py=pyridine) and trans-[OsVI(tpy)(Cl)2(N)]+ (tpy=2,2':6',2' '-terpyridine). Metal-oxo or metal-nitrido multiple bonding stabilizes the higher oxidation states and greatly influences reactivity. O-atom transfer, hydride transfer, epoxidation, C-H insertion, and proton-coupled electron-transfer mechanisms have been identified in the oxidation of organics by RuIV=O2+. The Ru-O multiple bond inhibits electron transfer and promotes complex mechanisms. Both O atoms can be used for O-atom transfer by trans-[RuVI(tpy)(O)2(S)]2+ (S=CH3CN or H2O). Four-electron, four-proton oxidation of cis,cis-[(bpy)2(H2O)RuIII-O-RuIII(H2O)(bpy)2]4+ occurs to give cis,cis-[(bpy)2(O)RuV-O-RuV(O)(bpy)2]4+ which rapidly evolves O2. Oxidation of NH3 in trans-[OsII(tpy)(Cl)2(NH3)] gives trans-[OsVI(tpy)(Cl)2(N)]+ through a series of one-electron intermediates. It and related nitrido complexes undergo formal N- transfer analogous to O-atom transfer by RuIV=O2+. With secondary amines, the products are the hydrazido complexes, cis- and trans-[OsV(L3)(Cl)2(NNR2)]+ (L3=tpy or tpm and NR2-=morpholide, piperidide, or diethylamide). Reactions with aryl thiols and secondary phosphines give the analogous adducts cis- and trans-[OsIV(tpy)(Cl)2(NS(H)(C6H4Me))]+ and fac-[OsIV(Tp)(Cl)2(NP(H)(Et2))]. In dry CH3CN, all have an extensive multiple oxidation state chemistry based on couples from Os(VI/V) to Os(III/II). In acidic solution, the OsIV adducts are protonated, e.g., trans-[OsIV(tpy)(Cl)2(N(H)N(CH2)4O)]+, and undergo proton-coupled electron transfer to quinone to give OsV, e.g., trans-[OsV(tpy)(Cl)2(NN(CH2)4O)]+ and hydroquinone. These reactions occur with giant H/D kinetic isotope effects of up to 421 based on O-H, N-H, S-H, or P-H bonds. Reaction with azide ion has provided the first example of the terminal N4(2-) ligand in mer-[OsIV(bpy)(Cl)3(NalphaNbetaNgammaNdelta)]-. With CN-, the adduct mer-[OsIV(bpy)(Cl)3(NCN)]- has an extensive, reversible redox chemistry and undergoes NCN(2-) transfer to PPh3 and olefins. Coordination to Os also promotes ligand-based reactivity. The sulfoximido complex trans-[OsIV(tpy)(Cl)2(NS(O)-p-C6H4Me)] undergoes loss of O2 with added acid and O-atom transfer to trans-stilbene and PPh3. There is a reversible two-electron/two-proton, ligand-based acetonitrilo/imino couple in cis-[OsIV(tpy)(NCCH3)(Cl)(p-NSC6H4Me)]+. It undergoes reversible reactions with aldehydes and ketones to give the corresponding alcohols.     

Tunable N-substitution in zwitterionic benzoquinonemonoimine derivatives: metal coordination, tandemlike synthesis of zwitterionic metal complexes, and supramolecular structures

Full details on a very efficient transamination reaction for the synthesis of zwitterionic N,N-dialkyl-2-amino-5-alcoholate-1,4-benzoquinonemonoiminium derivatives [C6H2(=NHR)2(=O)2] 5-16 are reported. The molecular structures of zwitterions 5 (R=CH3) in 5.H2O, 13 (R=CH2CH2OMe), 15 (R=CH2CH2NMe2), and of the parent, unsubstituted system [C6H2(=NH2)2(=O)2] 4 in 4.H2O have been established by single-crystal X-ray diffraction. This one-pot preparation can be carried out in water, MeOH, or EtOH and allows access to new zwitterions with N-substituents bearing functionalities such as -OMe (13), -OH (9-12), NR1R2 with R1 = or not equal R2 (14-16) or an alkene (8), leading to a rich coordination chemistry and allowing fine-tuning of the supramolecular arrangements in the solid state. As previously described for 15, which reacted with Zn(acac)2 to afford the octahedral Zn(II) complex [Zn[C6H2(NCH2CH2NMe2)O(O)(NHCH2CH2NMe2)]2] (20), ligands 13 and 16 with coordinating "arms" afforded with Zn(acac)2 the 2:1 adducts [Zn[C6H2(NCH2CH2X)O(=O)(NHCH2CH2NX)]2] 19 (X=OMe) and 21 (X=NHEt), with N2O4 and N4O2 donor sets around the octahedral Zn(II) center, respectively. Furthermore, zwitterions 15 and 16 reacted with ZnCl2 to give the stable, crystallographically characterized Zn(II) zwitterionic complexes [ZnCl2[C6H2(NCH2CH2NR1R2)O(=O)(NHCH2CH2NHR1R2)]] 22 (R1=R2=Me) and 23 (R1=Et, R2=H) by means of an unprecedented, tandemlike synthesis in which 1) the two pendant amino groups of the organic benzoquinonemonoimine zwitterionic precursor favor metal coordination and proton transfer and 2) the saturated linker prevents pi-conjugation between the charges. The nature of the structural arrangements in the solid state for both inorganic (20, 22, 23) and organic (5, 9, 13, and 15) molecules is determined by subtle variations in the nature of the N-substituent on the zwitterion precursor.     

Solid-state versus solution preparation of two crystal forms of [HN(CH2CH2)3NH][OOC(CH2)COOH]2. Polymorphs or hydrogen bond isomers?

The reaction of [N(CH2CH2)3N] with malonic acid [HOOC(CH2)COOH] in the molar 1:2 ratio yields two different crystal forms of the salt [HN(CH2CH2)3NH][OOC(CH2)COOH]2 depending on the preparation technique and crystallization speed: form I, containing malonate anions with intramolecular hydrogen bonds, is obtained by solid-state co-grinding or by rapid crystallization, whereas form II containing intermolecular hydrogen bonds is obtained by slow crystallization. Form I and II do not interconvert, and form I undergoes an order-disorder phase transition on cooling.     

Ligand movement modulates the rate of proton transfer in reactions of [Fe4S4Cl4]2-

Substitution of the first chloro-ligand in [Fe4S4Cl4]2- by 4-RC6H4S- (R = CF3, Cl, H, Me or MeO), in the presence of [H2N(CH2)3CH2]+, involves initial binding of thiolate, followed by protonation and finally chloride dissociation; the rate of protonation is facilitated by electron-withdrawing R-substituents indicating that Fe-thiolate bond length changes modulate proton transfer.     

Ancillary ligands and spectator cations as controlling factors in the construction of coordination and hydrogen-bonded networks with the tert-Bu-C triple bond C superset Ag(n) (n=4, 5) supramolecular synthon

Supramolecular networks constructed with the tBu--C[triple bond]C superset Ag(n) (n=4 or 5) metal-ligand synthon and trifluoroacetate have been transformed through the introduction of ancillary terminal nitrile ligands, from acetonitrile through propionitrile to tert-butyronitrile, giving rise to a 2D coordination network in AgC[triple chemical bond]CtBu3 AgCF(3)CO(2)H(2)O (1), a 2D hydrogen-bonded network in AgC[triple chemical bond]CtBu5 AgCF(3)CO(2)4 CH(3)CNH(2)O (2), a 2D hybrid coordination/hydrogen-bonded network in AgC[triple chemical bond]CtBu3 AgCF(3)CO(2)CH(3)CH(2)CN2 H(2)O (3), and another 2D coordination network in AgC[triple chemical bond]CtBu4 AgCF(3)CO(2) (CH(3))(3)CCN2 H(2)O (4). Concomitantly, the linkage modes between adjacent ethynide-bound Ag(n) aggregates in these compounds are also changed. A layer-type hydrogen-bonded host lattice in isostructural AgC[triple chemical bond]CtBu4 AgCF(3)CO(2)(R(4)N)(CF(3)CO(2)) 2 H(2)O (R(4)=BnMe(3), 5; R(4)=Et(4), 6; R(4)=nPr(4), 7) is obtained by introducing quaternary ammonium cations as guest templates, which occupy the interstices and thereby mediate the interlayer separation. Use of the bulky nBu(4)N(+) cation leads to disruption of the host network in AgC[triple bond]CtBu4 AgCF(3)CO(2)3[(nBu(4)N)(CF(3)CO(2))]H(2)O (8) with generation of a discrete dense nido-Ag(5) cluster.     

Synthetic and structural experiments on yttrium, cerium and magnesium trimethylsilylmethyls and their reaction products with nitriles; with a note on two cerium beta-diketiminates

The yttrium, cerium and magnesium bis(trimethylsilyl)methyls [Ln[CH(SiMe3)2]3][Ln = Y (1), Ce (2)], and the known compound Mg[[CH(SiMe3)2]2 (C) and [Mg(mu-Br)[CH(SiMe3)2](OEt2)]2 (D) formed the crystalline nitrile adducts [1(NCBut)2] (5), [2(NCPh)] (6), [C(NCR)2][R = But (8), Ph (9), C6H3Me2-2,6 (10)] and [Mg(mu-Br)[CH(SiMe3)2](NCR)]2 [R = But (11), Ph (12), C6H3Me2-2,6 (13)], rather than beta-diketiminato-metal insertion products. The beta-diketiminato-cerium complex [Ce[(N(SiMe3)C(C6H4But-4))2CH][N(SiMe3)2]2] (16) was obtained from [Ce[N(SiMe3)2]3] and the beta-diketimine H[[N(SiMe3)C(C6H4But-4)]2CH]]. The cerium alkyl 2 and [Ln[CH(SiMe3)(SiMe2OMe)]3][Ln = Y (3), Ce (4)] were obtained from the appropriate lithium alkyl precursor and [Ce(OC6H2But2-2,6-Me-4)3] or LnCl3, respectively. Heating complex 3 with benzonitrile in toluene afforded 2,2-dimethyl-4,6-diphenyl-5-trimethylsilyl-1,3-diaza-2-silahexa-1,3-diene (7), a member of a new class of heterocycles. The X-ray structures of the crystalline compounds, D, [Mg[CH(SiMe3)2]2(OEt2)2], the known [Ce(Cl)[(N(SiMe3)C(Ph))2CH]2] (E) and 16 are reported. The cerium alkyl (like 1) has one close Ce...C contact for each ligand, attributed to a gamma-C-Ce agostic interaction. The Ln alkyls and have a trigonal prismatic arrangement of the chelating ligands (each of the same chirality at Calpha) around the metal. In an arene solution at 313 K exists as two isomers, as evident from detailed NMR spectroscopic experiments.     

Role of the metal oxidation state in the SNS-Cr catalyst for ethylene trimerization: isolation of di- and trivalent cationic intermediates

The reaction of the highly selective [CySCH2CH2N(H)CH2CH2SCy]CrCl3 catalyst precursor with alkyl aluminum activators was examined with the aim of isolating reactive intermediates. Reaction with Me3Al afforded a cationic trivalent chromium alkyl species {[CySCH2CH2N(H)CH2CH2SCy]CrMe(mu-Cl)}2{(AlMe3)2(m-Cl}2.(C7H8)2 (1a). Although it was not possible to obtain crystalline samples of sufficient quality from the reaction with MAO (the most preferred activator), the near-to-identical EPR spectra indicated a very close structural similarity with 1a. Ethylene oligomerization tests clearly revealed that 1 and other cationic trivalent dimeric complexes {[CySCH2CH2N(H)CH2CH2SCy] CrCl(mu-Cl)}2{AlCl4}2.(C7H8)1.5 (2), monomeric [(CySCH2CH2N(H)CH2CH2SCy)CrCl2 (THF)][AlCl4] (3), and {[CySCH2CH2N(H)CH2CH2SCy]Cr(eta2-AlCl4)}{Al2Cl7} (4) adducts display the same catalyst selectivity as the [CySCH2CH2N(H)CH2CH2SCy]CrCl3 complex and, therefore, are probably all precursors to the same catalytically active species. 2, 3, and 4 were obtained upon treatment of [CySCH2CH2N(H)CH2CH2SCy] CrCl3 with different stoichiometric ratios of AlCl3.. When i-BAO activator was used, reduction of the metal center occurred readily, affording {([CySCH2CH2N(H)CH2CH2S Cy]Cr)(mu-Cl)]2}{(i-Bu)2AlCl2}2 (5). 5 is also a selective catalyst, thus indicating that trivalent species are most probably precursors to a divalent catalytically active complex. Reaction of CrCl2(THF)2 with the ligand afforded the labile divalent adduct [CySCH2CH2N(H)CH2CH2SCy]CrCl2(THF) (6), also catalytically active and selective. Instead, deprotonation of the ligand with n-BuLi followed by reaction with CrCl2(THF)2 gave the dinuclear complex [(mu-CySCH2CH2NCH2CH2SCy)CrCl]2 (7), which did not produce oligomers.     

Guest driven rearrangements of protonation and hydrogen bonding in decavanadate anions as their tetraalkylammonium salts

Single crystal X-ray structure determinations of [(n-C5H11)4N]3[H3V10O28].2(CH3)2CO (TAA-acetone), [(n-C5H11)4N]8[H3V10O28]2[H4V10O28].7C4H8O2 (TAA-dioxane), [(n-C5H11)4N]3[H3V10O28] (TAAh) and [(n-C6H13)4N]2[H4V10O28].4C4H8O2 (THA-dioxane) revealed that protonation and hydrogen bond formation of decavanadate anions in their tetraalkylammonium salts are influenced by the nature of the solvent molecules incorporated as guests into the crystals. When crystallized with acetone molecules, the decavanadate anion forms a self-associated hydrogen-bonded dimer of ([H3V10O28](3-))2 to hide the protons from the aprotic protophobic acetone molecules. When crystallized with 1,4-dioxane molecules, the decavanadate anion exposes its protons to the aprotic protophilic 1,4-dioxane molecules to form a hydrogen-bond assisted solvation complex of ((C4H8O2)4...[H4V10O28)](2-)). Size effects of the tetraalkylammonium cations on crystallizing these hydrogen-bonded assemblies were also examined.     

Effect of the nature of the metal atom on hydrogen bonding and proton transfer to [Cp*MH3(dppe)]: tungsten versus molybdenum

The hydrogen-bonding and proton-transfer pathway to complex [Cp*W(dppe)H(3)] (Cp*=eta(5)-C(5)Me(5); dppe=Ph(2)PCH(2)CH(2)PPh(2)) was investigated experimentally by IR, NMR, UV/Vis spectroscopy in the presence of fluorinated alcohols, p-nitrophenol, and HBF(4), and by using DFT calculations for the [CpW(dhpe)H(3)] model (Cp=eta(5)-C(5)H(5); dhpe=H(2)PCH(2)CH(2)PH(2)) and for the real system. A study of the interaction with weak acids (CH(2)FCH(2)OH, CF(3)CH(2)OH, (CF(3))(2)CHOH) allowed the determination of the basicity factor, E(j)=1.73+/-0.01, making this compound the most basic hydride complex reported to date. A computational investigation revealed several minima for the [CpW(dhpe)H(3)] adducts with CF(3)CH(2)OH, (CF(3))(2)CHOH, and 2(CF(3))(2)CHOH and confirms that these interactions are stronger than those established by the Mo analogue. Their geometries and relative energies are closely related to those of the homologous Mo systems, with the most stable adducts corresponding to H bonding with M-H sites, however, the geometric and electronic parameters reveal that the metal center plays a greater role in the tungsten systems. Proton-transfer equilibria are observed with the weaker proton donors, the proton-transfer step for the system [Cp*W(dppe)H(3)]/HOCH(CF(3))(2) in toluene having DeltaH=(-3.9+/-0.3) kcal mol(-1) and DeltaS=(-17+/-2) cal mol(-1) K(-1). The thermodynamic stability of the proton-transfer product is greater for W than for Mo. Contrary to the Mo system, the protonation of the [Cp*W(dppe)H(3)] appears to involve a direct proton transfer to the metal center without a nonclassical intermediate, although assistance is provided by a hydride ligand in the transition state.     

Proton-induced lewis acidity of unsaturated iridium amides

Oxidation of Cp*Ir((rac-TsDPEN)H (DPEN = H2NCHPhCHPhNTs) with Cp2FePF6 or Ph3CPF6 in MeCN solution generates [Cp*Ir(TsDPEN)(NCMe)]PF6 ([1H(NCMe)]PF6) together with H2 and Ph3CH, respectively. Labeling studies revealed that the Ir-H was abstracted. The formation of a transient electrophilic species is implicated by the formation of a cyclometalated derivative. The labile species [1H(NCMe)]+ was also obtained by protonation of the diamido derivative Cp*Ir(TsDPEN-H) (1) in MeCN solution (BArF4- = B(C6H3-3,5-(CF3)2)4-). The unsaturated, "naked" cation [1H]BArF4 can be prepared by protonation of 1 with H(OEt2)2BArF4 in CH2Cl2 solution or by thermal elimination of MeCN from [1H(NCMe)]+. Crystallographic analysis confirms the structure of this 16e cation in [1H]BArF4. The formally unsaturated species 1 and [1H]BArF4 have strongly contrasting Lewis acidities, with the cation binding PPh3, CO, and NH3. 1 does not measurably bind these same ligands. [1H]BArF4 is reactive toward H2, at least in the absence of inhibiting donor ligands such as MeCN. [1H]BArF4 (CH2Cl2 solutions) catalyzes the addition of H2 to 1 by proton transfer from an apparent dihydrogen complex. This work demonstrates that the protonation activates the Lewis acidity of unsaturated Ir(III) amides, giving rise to novel organometallic Lewis acids.     

Coupling of functional hydrogen bonds in pyridoxal-5'-phosphate-enzyme model systems observed by solid-state NMR spectroscopy

We present a novel series of hydrogen-bonded, polycrystalline 1:1 complexes of Schiff base models of the cofactor pyridoxal-5'-phosphate (PLP) with carboxylic acids that mimic the cofactor in a variety of enzyme active sites. These systems contain an intramolecular OHN hydrogen bond characterized by a fast proton tautomerism as well as a strong intermolecular OHN hydrogen bond between the pyridine ring of the cofactor and the carboxylic acid. In particular, the aldenamine and aldimine Schiff bases N-(pyridoxylidene)tolylamine and N-(pyridoxylidene)methylamine, as well as their adducts, were synthesized and studied using 15N CP and 1H NMR techniques under static and/or MAS conditions. The geometries of the hydrogen bonds were obtained from X-ray structures, 1H and 15N chemical shift correlations, secondary H/D isotope effects on the 15N chemical shifts, or directly by measuring the dipolar 2H-15N couplings of static samples of the deuterated compounds. An interesting coupling of the two "functional" OHN hydrogen bonds was observed. When the Schiff base nitrogen atoms of the adducts carry an aliphatic substituent such as in the internal and external aldimines of PLP in the enzymatic environment, protonation of the ring nitrogen shifts the proton in the intramolecular OHN hydrogen bond from the oxygen to the Schiff base nitrogen. This effect, which increases the positive charge on the nitrogen atom, has been discussed as a prerequisite for cofactor activity. This coupled proton transfer does not occur if the Schiff base nitrogen atom carries an aromatic substituent.     

Hydrogen-bonded 1D and 2D Assemblies of Tetraiso-butyl-resorcin[4]arene in the Crystalline State

1 INTRODUCTION There is continuing interest in the assembly of molecular capsules based on concomitant formation of multiple hydrogen bonds between smaller mole- cular components[1]. A particularly attractive buil- ding block is calix[4]resorcinarenes with eight pen- dant hydroxyl functional groups[2]. In a crystal engi- neering design strategy for molecular self-assembly, cocrystallization of C-methylcalix[4]resorcinarenes with nitrogen-donor molecules such as pyridines in the presence …