Adsorption and desorption of lysozyme on nano-sized magnetic particles and its conformational changes

Adsorption and desorption of lysozyme on nano-sized magnetic particles and its conformational change were studied in this work. Adsorption of lysozyme on nano-sized magnetic particles (Fe₃O₄) was carried out at different pH. Maximum adsorption of lysozyme (4.65 mg/m²) occurred at its isoelectric point (pI=11.1). Differential scanning calorimetry (DSC) results show that the lysozyme adsorbed on magnetic particles did not show any thermal transition over the range 20–100 °C. High desorption of lysozyme from magnetic particles was achieved using NaH₂PO₄ (pH 4.0) (90%) and NaSCN (pH 6.0) (97%) as desorbents. The conformational change of the lysozyme desorbed by NaH₂PO₄ was small, while the lysozyme desorbed by NaSCN underwent a significant conformational change as measured by the intrinsic fluorescence. Eighty-eight and 82% activity was retained in the desorbed enzyme for desorption by NaH₂PO₄ and NaSCN, respectively.     

Adsorption of polyacrylic acid on aluminium oxide: DRIFT spectroscopy and ab initio calculations

Diffuse reflectance Fourier transform infrared (DRIFT) spectroscopy was used to study the adsorption process of the water-soluble polyacrylic acid (PAA) polymer on hydrous δ-Al₂O₃. Vibrational assignment of PAA, sodium polyacrylate, (Na–PA) and the PA-oxide surface complex was achieved by comparison of observed band position and intensity in the DRIFT spectra with wavenumbers and intensities from ab initio quantum mechanical calculations. The presented data of polyacrylic acid suggest that IR data calculated ab initio on relatively short oligomers (quantum-mechanical oligomer approach) may provide valuable information regarding the interpretation of polyelectrolyte infrared spectra. Batch adsorption experiments were performed to sorb PAA onto the δ-Al₂O₃ surface. The results obtained from DRIFT studies were compared with adsorption isotherm experiments in order to relate the level of PAA coverage to the nature of the surface complex. Ab initio molecular orbital calculations on PAA/Al₂O₃ clusters were used to model possible surface complexes. Strong correlation were found between theoretical and observed DRIFT frequencies of the antisymmetric R-COO⁻ vibration. A number of possible configurations of the polyacrylic acid/aluminate surface complex were tested via ab initio calculations. These possible configurations included different di-aluminium octahedral Al³⁺ surface models. Results obtained from adsorption isotherm experiments, DRIFT spectra and ab initio calculations indicate that the carboxylate oxygens bridge an Al³⁺-octahedral dimer [Al₂(OH)₂4(H₂O)2(OH)] in a ligand-exchange inner sphere complex.     

On the retention mechanisms and secondary effects in microthermal field-flow fractionation of particles

The behavior of nanometer or micrometer-sized particles, dispersed in liquid phase and exposed to temperature gradient, is a complex and not yet well understood phenomenon. Thermal field-flow fractionation (TFFF), using conventional-size channels, played an important role in the studies of this phenomenon. In addition to thermal diffusion (thermophoresis) and molecular diffusion or Brownian movement, several secondary effects such as particle–particle and/or particle–wall interactions, chemical equilibria with the components of the carrier liquid, buoyant and lift forces, etc., may contribute to the retention and complicate the understanding of the relations between the thermal diffusion and the characteristics of the retained particles. Microthermal FFF is a new high-performance technique allowing much easier manipulation and control of the operational parameters within an extended range of experimental conditions in comparison with conventional TFFF. Consequently, in combination with various other methods, it is well suited for a detailed investigation of the mentioned effects. In this work, some contradictory published results concerning the thermal diffusion of the colloidal particles, studied by TFFF but also by other methods, are analyzed and compared with our experimental findings.     

Adsorption of urea on a polycrystalline copper electrode

The adsorption of urea on a polycrystalline copper electrode from 0.01 M NaClO₄ solution has been studied by impedance spectroscopy and radiometric method. The dependence of the surface concentration of urea on the electrode potential and the bulk concentration was determined. From radiometric data, it follows that the adsorption of urea on the copper electrode takes place in the entire range of studied potentials where no faradaic processes occur. In this range, the process of adsorption is practically reversible with respect to the potential and the bulk concentration of urea. The experimental data were described by the Langmuir and the virial isotherms and the Gibbs energy of adsorption were calculated. The data of the urea adsorption on different electrodes have been compared and the role of the kind of the metal on the adsorption process was discussed.     

Retention and selectivity effects caused by bonding of a polar urea-type ligand to silica: a study on mixed-mode retention mechanisms and the pivotal role of solute-silanol interactions in the hydrophilic interaction chromatography elution mode

The separation properties of five silica packings bonded with 1-[3-(trimethoxysilyl)propyl]urea in the range of 0–3.67 μmol m⁻² were investigated in the hydrophilic interaction chromatography (HILIC) elution mode. An increase of the ligand surface density promoted retention of non-charged polar compounds and even more so for acids. An opposite trend was observed for bases, while the amphoteric compound tyrosine exhibited a U-shaped response profile. An overall partitioning retention mechanism was incompatible with these observations; rather, the substantial involvement of adsorptive interactions was implicated. Support for the latter was provided by column-specific changes in analyte retention and concomitant selectivity effects due to variations of salt concentration, type of salt, pH value, organic modifier content, and column temperature. Silica was more selective for separating compounds differing in charge state (e.g. tyramine vs. 4-hydroxybenzoic acid), while in cases where structural differences of solutes resided in non-charged polar groups (e.g. tyramine vs. 5-hydroxydopamine, nucleoside vs. nucleobase) more selective separations were obtained on bonded phases. Hierarchical cluster analysis of the home-made urea-type and three commercial amide-type bonded packings evinced considerable differences in separation properties. The present data emphasise that the role of the packing material under HILIC elution conditions is hardly just the polar support for a dynamic coating with a water-enriched layer. Three major retention mechanisms are claimed to be relevant on bare silica and the urea-type bonded packings: (i) HILIC-type partitioning, (ii) HILIC-type weak adsorption such as hydrogen bonding between solutes and ligands or solutes and silanols (potentially influenced by individual degrees of solvation, salt bridging, etc.), (iii) strong electrostatic (ionic) solute–silanol interactions (attractive/repulsive). Even when non-charged polar bonded phases are used, solute–silanol interactions should not be discounted, which makes them a prime parameter to be characterised by HILIC column tests. Multi/mixed-mode type separations seem to be common under HILIC elution conditions, associated with a great deal of selectivity increments. They are accessible and controllable by a careful choice of the type of packing, the mobile phase composition, and the temperature.     

十二烷基三甲基溴化铵在聚苯乙烯胶乳粒子上的吸附

实验测得C~1~2TAB在PS胶乳粒子表面的吸附等温线呈L型的二阶段吸附特征,这表明初始的C~1~2TA^+离子是将其季铵正电性头基吸引在PS链的负电性硫酸根端基上,并将碳氢链通过疏水相互作用吸附在PS链上。结合光子相关谱测得胶乳粒子流体力学半径R~H的变化,表明第I阶段围绕着这些初始吸附位的聚集吸附,产生平均聚集数为4.0的松散小聚集体,此时对应的浓度c/cmc=0.32是文献通常所指的临界表面胶团浓度csmc。其后的进一步聚集吸附最终生成了附着在PS链端基处且平均聚集数为19.5的球形吸附胶团。这一饱和吸附的结果增加了胶乳粒子在水溶液中的分散稳定性。     

3种D-氨基葡萄糖席夫碱化合物在银溶胶上的吸附状态

合成了3种D－氨基葡萄糖席夫碱化合物,研究了它们的表面增强拉曼光谱、傅里叶变换拉曼光谱,探讨了它们在银溶胶上的吸附状态和表面增强机理,发现这类化合物以化学吸附模式为主,结构相似的化合物在银溶胶上的吸附状态不一定完全相同。     

Adsorption of ethyl xanthate anions on a silver electrode. An in-situ FTIR study

The adsorption of ethyl xanthatc ion (EX⁻) on a silver electrode in sodium sulphate, phosphate buffer (pH 6.8) and borate buffer (pH 9.2) solutions was studied in situ using Fourier transform IR reflection spectroscopy. The measurements were carried out using a thin-layer flow cell, which allows a continuous supply of the electroactive species into the thin layer. The voltammetric behaviour of the silver electrode in EX⁻-containing solution is characterized by the formation of silver ethyl xanthate (AgEX), which is preceded by a prewave due to chemisorption of ethyl xanthate. An IR band at 1220 cm ⁻¹, assigned to chemisorbed ethyl xanthate, was observed in spectra obtained in the chemisorption region. All IR bands characteristic of AgEX were observed in spectra of a silver electrode surface covered by a few monolayers of AgEX. The in-situ IR measurements also showed that the adsorption of EX⁻ starts directly on the positive side of the potential of zero charge of silver (−0.7 V/SHE).     

Hydrogen bonding effects on molecular structure: crystallographic studies of barbiturates

X-ray crystal structure determinations show systematic perturbations of the order of 0.01 Å in the oxopyrimidine rings of twelve barbiturate molecules. They appear to be related to the mode of intermolecular NHβO hydrogen bonding.     

In Situ FTIR Spectroscopic Study of Electrochemical Adsorption of Phosphate Ions on Gold

Infrared reflection-absorption spectra for primary, secondary and tertiary orthophosphate anions on a gold electrode in aqueous solution were studied by in situ FTIR spectroscopy. The spectra show that H2PO4- , HPO ions do not interact with the electrode surface as strong as PO do. According to the surface selection rule, we deduce the modes of adsorption of these anions on the electrode from these spectra. The experiment also confirms the affection to adsorption of ion on the electrode due to ion-migration into thin-layer cavity.     

环己烯对噻吩在CuY分子筛上吸附的影响机制

A CuY zeolite prepared by liquid phase ion exchange was characterized by X-ray photoelectron spectroscopy, pyridine in situ Fourier transform infrared (in situ FTIR) spectroscopy, and ammonia temperature programmed desorption. The effect of cyclohexene on the adsorption of thiophene over the prepared CuY zeolite was explored by in situ FTIR. In particular, the role of the zeolite's Br?nsted acidity was investigated in the adsorption process. The results show that the percentage of Cu⁺ on the surface of the CuY zeolite can reach 77%. The surface acidity of the CuY zeolite mainly comprises medium and strong Br?nsted acidity and Lewis acidity. According to the adsorption results, cyclohexene negatively influences thiophene adsorption on the Br?nsted or Lewis acid sites in CuY by competitive adsorption. Although polymerization of thiophene and cyclohexene can occur easily on the HY or REY zeolites, the presence of Br?nsted acids in the CuY zeolite was not sufficient to polymerize either thiophene or cyclohexene. This difference may be caused by an anti-synergistic effect between the Cu ions of the CuY zeolite and neighboring Br?nsted acid sites, the result of which inhibits the polymerization of adsorbed thiophene and cyclohexene.     

Adsorption, desorption and activities of acid phosphatase on various colloidal particles from an Ultisol

Adsorption, desorption and activity of acid phosphatase on various soil colloidal particles and pure clay minerals were studied. Higher adsorption amounts and low percentage of desorption of acid phosphatase were found on fine soil clays (<0.2 μm). Electrostatic force and ligand exchange are the major driving forces that are involved in the adsorption of enzymes on soil clays. More enzyme molecules were adsorbed on soil clays in the presence of organic components. However, enzymes on organic clays were more easily released. One-third of the enzyme on goethite was adsorbed via ligand exchange process. Some other interactions, such as van der Waals force, hydrophobic force and hydrogen bonding may be more important in the adsorption of enzyme on kaolinite and the enzyme in this system cannot be easily removed. Coarse clays (0.2–2 μm) and inorganic soil clays had higher affinities for enzyme molecules than fine clays and organic clays, respectively. The activity of enzyme bound on soil clays was inhibited and the thermal stability was increased in the presence of organic matter. Data obtained in this study are helpful for a better understanding of the interactions of enzymes with inorganic and organic constituents in soil and associated environments.     

Adsorption of trimethylamine on zirconium silicate and polyethylene powder surfaces

Sorptive interactions of volatile organic compounds (VOCs) with indoor surfaces play a major role in inhalation exposure to these species. Using ZrSiO₄ and polyethylene (PE) to model mineral surfaces and carpeting, respectively, the adsorption behavior of gaseous trimethylamine (TMA) was examined under conditions of 80% relative humidity (RH) in N₂ and in the presence of 1000 ppm CO₂ or NH₃. TMA adsorption and desorption behavior were studied using attenuated total reflection infrared (ATR-IR) and X-ray photoelectron (XPS) spectroscopies. Spectral data revealed that TMA adsorbed on both surfaces in a protonated state. Stronger adsorption was observed to occur on ZrSiO₄. XPS scans indicate that the “dry” ZrSiO₄ surface maintains OH groups available for bonding, supporting earlier research showing that partition coefficients increase as RH decreases.     

Adsorption of urea on a polycrystalline silver electrode; comparison of electrochemical and radiometric methods

The adsorption of urea on a polycrystalline silver electrode was studied by radiometry and impedance spectroscopy. The differential capacity of the silver electrode in 0.01 M NaClO₄ solution containing urea in concentrations from 10^–6 to 5×10^–4 M has been determined. The isotherms of urea adsorption, found from the capacitance and radiometric measurements have been compared. The experimental data were described by the Langmuir isotherm, and the Gibbs energy of adsorption was calculated. The urea adsorption takes place in the entire range of the applied potential. The process is reversible with respect to the electrode potential and the bulk urea concentration.Dedicated to Professor Gyorgy Horanyi on the occasion of his 70th birthday     

Adsorption of pyridine on a polycrystalline gold electrode surface studied by infrared reflection absorption spectroscopy

The adsorption behavior of pyridine on a smooth polycrystalline gold electrode surface was investigated over a wide wavenumber region (2000–500 cm⁻¹) by in situ infrared reflection absorption spectroscopy (IRAS). The reversible adsorption/desorption of pyridine was observed upon the change in applied electrode potential, and the adsorption state at positive potentials was found to depend strongly on the kind of halide ion used as a supporting electrolyte. Symmetry analysis of absorption bands observed revealed that pyridine molecules adsorb with the molecular axis (C₂ axis) perpendicular to the electrode surface (vertical configuration) at positive potentials in 0.5 M KF, KCl and KBr solutions. A band due to the out-of-plane bending mode of the adsorbed pyridine molecule was observed at potentials more negative than ca. 0 V for 0.5 M KF solution containing 100 mM pyridine. We concluded that even in the 100 mM pyridine solution, adsorbed pyridine forms a monolayer and that the molecules reorient from a flat (parallel) to the vertical configuration as the potential becomes less negative. No bands due to adsorbed pyridine were detected for 0.5 M KI solution. The amount of adsorbed pyridine was found to depend strongly on the strength of specific adsorption of halide ions.     

硫脲及其衍生物的SERS和量子化学研究

Adsorption of thiourea (TU) and ethylthiourea(ETU) on roughened silver electrode was investigated using in- situ surface enhanced Raman spectroscopy(SERS). Using quantum chemistry and HSAB theories, the influences of electrode potential and the different substituent groups on SERS were discussed. TU is chemisorbed perpendicularly by Ag-S bond on silver at E=-0.3 V and adsorption of TU turns into a parallel orientation at E=-0.9 V. ETU is always chemisorbed at an angle from Ag. The adsorption of ETU is through C=C and C=O groups at E=-0.3 V, and mainly through C=C at E=-0.9V.     

CuNaY分子筛上汽油馏分中含硫组分的选择吸附及其红外光谱研究

本文从基础研究的角度出发,以红外光谱技术为主要研究手段,以噻吩为汽油馏分中含硫有机分子的模型化合物,首次给出了噻吩分子在吸附剂表面的吸附方式和吸附位,以及芳烃对噻吩吸附的影响等红外光谱信息.为避免吸附剂的强酸性可能引起的干扰,采用NaY分子筛为原料进行液相离子交换制备吸附剂.     

脲对丙烯酰胺聚合及产物结构的影响

本文研究了添加脲（添加量为丙烯酞胺的０．０６３到０．２００质量比）对丙烯酰胺聚合的影响。脲的加入能取代丙烯酞胺的双分于氢键缔合，使聚丙烯酰胺的水溶性速度提高，玻璃化温度下降。用红外光谱分析和差热分析的结构分析证实了上述机理。     

The chemical composition and bonding structure of amorphous hydrogenated carbon nitride film on aluminum surface deposited by electrodeposition

Amorphous hydrogenated carbon nitride films with excellent adhesion to the substrates were deposited on the surfaces of aluminum plates by electrodeposition with acetonitrile as carbon source. The as‐obtained films were detailed characterized by Raman, XPS and FTIR. The results show that the as‐obtained films are mainly made up of sp2 C, sp3 C, C? N, C?N bonds and a spot of sp3? CH₂, sp3? CH₃, sp3? CH and sp2? CH bonds. The atomic ratio of N/C is evaluated to be about 2.98 at.% by XPS. Raman analysis indicated that I_D/I_G ratios decreased from 0.827 to 0.675 when the deposition time increased from 10 to 20 h. At the end, on the basis of the detailed analysis, results of Raman, FTIR and XPS, the possible deposition mechanism was discussed. Copyright © 2010 John Wiley & Sons, Ltd.