Ion exchange of Pb(2+), Cu(2+), Fe(3+), and Cr(3+) on natural clinoptilolite: selectivity determination and influence of acidity on metal uptake

In the present study ion exchange of Pb(2+), Cu(2+), Fe(3+), and Cr(3+) on natural Greek clinoptilolite was examined in terms of selectivity toward the above heavy metals in single- and multicomponent solutions in batch systems. Also examined are the influence of clinoptilolite on solution acidity and the effect of acidity on the ion exchange process. Clinoptilolite increases solution acidity due to the exchange of H(+) cations with the cations initially present in its structure. H(+) cations should be considered as competitive ones in ion exchange processes, and consequently ion exchange of metals is favored at high acidity values. Cu(2+) and Cr(3+) are the most sensitive cations with respect to acidity. Selectivity determination demonstrates that the selectivity at total concentration 0.01 N and acidity 2 in both single- and multicomponent solutions is following the order Pb(2+)>Fe(3+)>Cr(3+) > or =Cu(2+). This order is set since the first days of equilibration. However, Cu(2+) shows remarkable changes in selectivity and generally its uptake and selectivity are increasing with time. On the other hand selectivity in single metal solutions where acidity is not adjusted is following the order Pb(2+)>Cr(3+)>Fe(3+) congruent with Cu(2+).     

New masking procedure for selective complexometric determination of copper(II)

A study has been made of a new masking procedure for highly selective complexometric determination of copper(II), based on decomposition of the copper-EDTA complex at pH 5-6. Among the various combinations of masking agents tried, ternary masking mixtures comprising a main complexing agent (thiourea), a reducing agent (ascorbic acid) and an auxiliary complexing agent (thiosemicarbazide or a small amount of 1,10-phenanthroline or 2,2'-dipyridyl) have been found most suitable. An excess of EDTA is added and the surplus EDTA is back-titrated with lead (or zinc) nitrate with Xylenol Orange as indicator (pH 5-6). A masking mixture is then added to decompose the copper-EDTA complex and the liberated EDTA is again back-titrated with lead (or zinc) nitrate. The following cations do not interfere: Ag(+), Hg(2+), Pb(2+), Ni(2+), Bi(3+), As(3+), Al(3+), Sb(3+), Sn(4+), Cd(2+), Co(2+), Cr(3+) and moderate amounts of Fe(3+) and Mn(2+). The notable feature is that consecutive determination of Hg(2+) and Cu(2+) can be conveniently carried out in the presence of other cations.     

A liquid state Hg(2+)-sensitive electrode

The construction and basic characteristics of a liquid-state Hg(2+)-sensitive electrode are discussed. The membrane consists of the Hg(2+) chelate of diketohydrindylidene-diketohydrindamine (DYDA) in chloroform. The range of linear response of the electrode is 10(-1)-10(-5)M Hg(2+) with a slope of 31 mV/decade. The response time of the electrode is a few seconds in concentrated solutions. The electrode may be used with good results in potentiometric titrations involving Hg(2+).     

Highly sensitive, selective, and rapid fluorescence Hg2+ sensor based on DNA duplexes of poly(dT) and graphene oxide

Coupling T base with Hg(2+) to form stable T-Hg(2+)-T complexes represents a new direction in detection of Hg(2+). Here a graphene oxide (GO)-based fluorescence Hg(2+) analysis using DNA duplexes of poly(dT) that allows rapid, sensitive, and selective detection is first reported. The Hg(2+)-induced T(15)-(Hg(2+))(n)-T(15) duplexes make T(15) unable to hybridize with its complementary A(15) labelled with 6'-carboxyfluorescein (FAM-A(15)), which has low fluorescence in the presence of GO. On the contrary, when T(15) hybridizes with FAM-A(15) to form double-stranded DNA because of the absence of Hg(2+), the fluorescence largely remains in the presence of GO. A linear range from 10 nM to 2.0 μM (R(2) = 0.9963) and a detection limit of 0.5 nM for Hg(2+) were obtained under optimal experimental conditions. Other metal ions, such as Al(3+), Ag(+), Ca(2+), Ba(2+), Mg(2+), Zn(2+), Mn(2+), Co(2+), Pb(2+), Ni(2+), Cu(2+), Cd(2+), Cr(3+), Fe(2+), and Fe(3+), had no significant effect on Hg(2+) detection. Moreover, the sensing system was used for the determination of Hg(2+) in river water samples with satisfactory results.     

Spectrophotometric determination of chloride in PtAl(2)O(3)/SiO(2) catalysts with Hg(SCN)(2)Fe(3+) reagent

A method is described for the determination of chloride in PtAl(2)O(3)/SiO(2) catalysts, based on its extraction with alkali followed by reaction with Hg(SCN)(2)Fe(3+) reagent and spectrophotometric measurement at 460 nm. Beer's law is obeyed in the concentration range 5-75 mug of chloride in 25 ml of aqueous solution. The molar absorptivity is 1.99 x 10(3) l.mole(-1).cm(-1). The rapid colour development, excellent reproducibility and absence of interference from the species most often present in the catalysts are the advantages of the method.     

Preparation and Properties of the Corner-Shared Double Cube [Mo(6)BiS(8)(H(2)O)(18)](8+) as a Derivative of [Mo(3)S(4)(H(2)O)(9)](4+) in Aqueous Acidic Solutions

The reaction of [Mo(3)S(4)(H(2)O)(9)](4+) with Bi(III) in the presence of BH(4)(-) (rapid), or with Bi metal shot (3-4 days), gives a heterometallic cluster product. The latter has been characterized as the corner-shared double cube [Mo(6)BiS(8)(H(2)O)(18)](8+) by the following procedures. Analyses by ICP-AES confirm the Mo:Bi:S ratio as 6:1:8. Elution from a cation-exchange column by 4 M Hpts (Hpts = p-toluenesulfonic acid), but not 2 M Hpts (or 4 M HClO(4)), is consistent with a high charge. The latter is confirmed as 8+ from the 3:1 stoichiometries observed for the oxidations with [Co(dipic)(2)](-) or [Fe(H(2)O)(6)](3+) yielding [Mo(3)S(4)(H(2)O)(9)](4+) and Bi(III) as products. Heterometallic clusters [Mo(6)MS(8)(H(2)O)(18)](8+) are now known for M = Hg, In, Tl, Sn, Pb, Sb, and Bi and are a feature of the P-block main group metals. The color of [Mo(6)BiS(8)(H(2)O)(18)](8+) in 2.0 M Hpts (turquoise) is different from that in 2.0 M HCl (green-blue). Kinetic studies (25 degrees C) for uptake of a single chloride k(f) = 0.80 M(-)(1) s(-)(1), I = 2.0 M (Hpts), and the high affinity for Cl(-) (K > 40 M(-)(1)) exceeds that observed for complexing at Mo. A specific heterometal interaction of the Cl(-) not observed in the case of other double cubes is indicated. The Cl(-) can be removed by cation-exchange chromatography with retention of the double-cube structure. Kinetic studies with [Co(dipic)(2)](-) and hexaaqua-Fe(III) as oxidants form part of a survey of redox properties of this and other clusters. The Cl(-) adduct is more readily oxidized by [Co(dipic)(2)](-) (factor of approximately 10) and is also more air sensitive.     

Doping Effect of Bi~(3+) on the Properties of YAG:Ce~(3+),Mn~(2+) Phosphor Ceramics for Warm WLEDs

A series of Bi³⁺-doped YAG:Ce³⁺, Mn²⁺ ceramics was synthesized successfully by gel-casting method and structurally characterized by XRD and SEM. The doping effect and related mechanism of Bi³⁺ upon the luminescent property were studied. It can be assigned to the energy transfer of multipolar interaction from Bi³⁺ to Ce³⁺, leading to the improvement of emission intensity about 58% for 0.0001 Bi³⁺ and 0.05 Mn²⁺ doping. In addition, the emission is significantly red-shifted with the peak at 590 nm for the Y2.9939 Ce0.006 Bi0.0001 Al4.96 Mn0.02 Si0.02 O12 ceramic specimen with in-line transmittance 81.6% at 1100 nm. The LED module assembled from Y2.9939 Ce0.006 Bi0.0001 Al4.96 Mn0.02 Si0.02 O12 ceramic owns correlated color temperature(CCT) of 3960 K and luminous efficiency(LE) of 92 lm/W, implying that doping Bi³⁺ shows a good sensitization effect in the YAG:Ce³⁺, Mn²⁺ ceramic system and further serving as an attracting phosphor candidates for warm WLEDs applications.     

A water soluble Al(3+) selective colorimetric and fluorescent turn-on chemosensor and its application in living cell imaging

An efficient water soluble fluorescent Al(3+) receptor, 1-[[(2-furanylmethyl)imino]methyl]-2-naphthol (1-H) was synthesized and characterized by physico-chemical and spectroscopic tools along with single crystal X-ray crystallography. High selectivity and affinity of 1-H towards Al(3+) in HEPES buffer (DMSO/water: 1/100) of pH 7.4 at 25 °C showed it to be suitable for detection of intracellular Al(3+) by fluorescence microscopy. Metal ions, viz. alkali (Na(+), K(+)), alkaline earth (Mg(2+), Ca(2+)), and transition-metal ions (Ni(2+), Zn(2+), Cd(2+), Co(2+), Cu(2+), Fe(3+), Cr(3+/6+), Hg(2+)) and Pb(2+), Ag(+) did not interfere. The lowest detection limit for Al(3+) was calculated to be 6.03 × 10(-7) M in 100 mM HEPES buffer (DMSO/water: 1/100). Theoretical calculations have also been included in support of the configuration of the probe-aluminium complex.     

Pretreated bright palladium electrode in potentiometric redox titrations Titration of Cr(2)O(7)(2-) and Ce(4+) with Fe(2+)

The behaviour of the bright palladium electrode toward the redox systems Cr(2)O(7)(2-)/Fe(2+) and Ce(4+)/Fe(2+) (in potentiometric titration) has been investigated as a function of pretreatment of the electrode. Anodization of the electrode at potentials higher than 800 mV increases DeltaE at the equivalence point by 300-400 mV for the dichromate titration. The sharp change in potential is due to the reaction between PdO(2) and Fe(2+). The equivalence point corresponds to the beginning of the potential drop, rather than the inflexion point, especially for dilute solutions. If the electrode is ignited before use the surface oxide PdO is oxidized to PdO(2) by Cr(V), the potential increases during the titration and DeltaE is 200 mV bigger than when an untreated electrode is used. In the titration of Ce(4+) with Fe(2+) the DeltaE is largest with untreated electrodes, and if the anodized electrode is used, the titration curves clearly show the reaction between PdO(2) and Fe(2+).     

The catalytic effect of bismuth for VO_2~+/VO~(2+) and V~(3+)/V~(2+) redox couples in vanadium flow batteries

The effect of bismuth(Bi) for both VO_2~+/VO2+ and V~(3+)/V~(2+) redox couples in vanadium flow batteries(VFBs) has been investigated by directly introducing Bi on the surface of carbon felt(CF).The results show that Bi has no catalytic effect for VO_2~+/VO2+ redox couple.During the first charge process,Bi is oxidized to Bi~(3+)(never return back to Bi metal in the subsequent cycles) due to the low standard redox potential of 0.308 V(vs.SHE) for Bi3+/Bi redox couple compared with VO_2+/VO2+ redox couple and Bi~(3+)exhibit no(or neglectable) electro-catalytic activity.Additionally,the relationship between Bi loading and electrochemical activity for V~(3+)/V~(2+) redox couple was studied in detail.2 wt%Bi-modified carbon felt(2%-BiCF) exhibits the highest electrochemical activity.Using it as negative electrode,a high energy efficiency(EE) of 79.0%can be achieved at a high current density of 160mA/cm~2,which is 5.5%higher than the pristine one.Moreover,the electrolyte utilization ratio is also increased by more than 30%.Even the cell operated at 140mA/cm2 for over 300 cycles,the EE can reach 80.9%without obvious fluctuation and attenuation,suggesting excellent catalytic activity and electrochemical stability in VFBs.     

Construction of a new Hg(2+)-selective liquid-state electrode

The construction and basic characteristics of a new liquid-state Hg(2+)-selective membrane electrode are discussed. The membrane consists of the PAN chelate of Hg(II), dissolved in CHCl(3). The linear response range of the electrode is 10(-1) -10(-5)M Hg(2+) with a slope of 28.5 mV/decade of concentration. The response time of the electrode in dilute solutions is less than 3 min, and in concentrated solutions it is only a few sec. The electrode has been used in precipitation or complexation titrations in which Hg(2+) is involved (e.g., in the determination of some organic compounds in drug synthesis).     

Studies on the polymer + plasticizer membrane-electrode-VIII Use of the PVC + tricresyl phosphate membrane as indicating electrode in potentiometric precipitation titration

Results obtained by use of the PVC + tricresyl phosphate membrane-electrode in potentiometric precipitation titration of some halides and pseudohalides are given. Solutions of Ag(+), Tl(+) and Hg(2)(2+) were used as titrants, to which the membrane is responsive. The fast response to Ag(+) ions allowed the determination of iodide by automatic recording of the potentiometric curve (or its derivative).     

Simultaneous determination of arsenic, antimony, bismuth and mercury in geological materials by vapor generation-four-channel non-dispersive atomic fluorescence spectrometry

Chemical vapor generation (CVG) coupled with non-dispersive atomic fluorescence spectrometry (NDAFS) has been widely used for determination of vapor-forming elements, but most of such works have been focused on single element analysis, and reports dealing with more than three elements simultaneous determination by CVG-NDAFS are rare. In this work, a sensitive and robust analytical procedure for the simultaneous determination of arsenic, antimony, bismuth and mercury in geological materials using vapor generation-four-channel non-dispersive atomic fluorescence spectrometry has been developed. The conditions of instrumentation and vapor generation of arsenic, antimony, bismuth and mercury were optimized. The optimized concentrations of KBH(4) and HCl required for analytes generation were 1.3% (m/v) and 20% (v/v), respectively. The interferences of coexisting ions and mutual hydride interferences were investigated carefully. One thousand milligrams per litre of Fe(3+); 500mgl(-1) of Pb(2+), Zn(2+), Mn(2+); 50mgl(-1) Cu(2+), Ni(2+), Cr(6+), Co(2+); 10mgl(-1) Ag(+) and 5mgl(-1) Au(3+) does not interfere with the determination of As, Sb, Bi and Hg. Associating a dilution of 1:250 (m/v) in the procedure of sample pretreatment, the tolerant concentrations of As, Sb, Bi and Hg in real geological materials are 2500, 1000, 250 and 5000ppm, respectively. Under optimal conditions, the detection limits for As, Sb, Bi and Hg were determined to be 0.068, 0.047, 0.037 and 0.008ngml(-1), respectively. The precisions for seven replicate determinations at the 5ngml(-1) of As, Sb, Bi and 1ngml(-1) of Hg were 0.47, 0.60, 0.97 and 0.93% (R.S.D.), respectively. Sample digestion was carried out on 500mg sample with 3ml HNO(3) and 10ml HCl, followed by addition of thiourea solution for the quantitative reduction of As(V), Sb(V) to As(III), Sb(III). The proposed method was successfully applied to the simultaneous determination of As, Sb, Bi and Hg in a series of certified geological reference materials using simple aqueous standard calibration technique. The results obtained are in good agreement with the certified values.     

A "turn-on" electrochemiluminescent biosensor for detecting Hg2+ at femtomole level based on the intercalation of Ru(phen)3(2+) into ds-DNA

A well-designed oligonucleotide functionalized for Hg(2+) identification and Ru(phen)(3)(2+) intercalation is used to develop a "turn-on" electrochemiluminescent (ECL) biosensor for the determination of Hg(2+) in a drop (10 μL) of sample.     

A new sensitive method for the spectrophotometric determination of molybdenum using 3-hydroxy-2-(2'-thienyl)-4H-chromen-4-one

A spectrophotometric method has been developed for the determination of Molybdenum (VI) using 3-hydroxy-2-(2'-thienyl)-4H-chromen-4-one as a complexing agent. The complex formed was dissolved in water in the presence of Triton X-100 and exhibits an absorption maximum at 410 nm. A large number of metal ions like Co(II), Ni(II), Mn(II), Cr(III), Zn(II), Cu(II), Hg(II), Bi(III), Fe(II), Fe(III), Zr(IV), V(V) can be tolerated at an appreciable concentrations. Molar absorptivity and Sandell's sensitivity of the method is 2.80 x 10(5) l mol-1cm-1 and 3.42 x 10(-4) micrograms cm-2, respectively. Beer's law is obeyed in the concentration range of 0.01-0.4 ppm Mo(VI). Aliquots containing 0.2 ppm of Mo(VI) give a mean absorbance of 0.56 with a relative standard deviation of 1.3%.     

溶胶-凝胶法制备(Ca-Zn)O-Al_2O_3-SiO_2:Eu~(3+),Bi~(3+)发光体

用溶胶-凝胶法合成无机玻璃、玻璃陶瓷和陶瓷已得到发展。本文报道利用此法低温合成(Ca-Zn)O-Al_2O_3-SiO_2:Eu~(3+),Bi~(3+)发光体的研究结果。所用原料为99.99％的Eu_2O_3、99.99％的金属铝、99.999％的金属铋及CaCO_3、ZnCO_3和Li_2CO_3(提纯)。上述原料用HNO_3(GR)溶解。将计算的摩尔比量的Si(OC_2H_5)_4、C_2H_5OH和CH_3COOH以及Ca(NO_3)_2、Al(NO_3)_3、Zn(NO_3)_2、LiNO_3、Bi(NO_3)_3和Eu(NO_3)_3溶液,在一定的pH值下,在75℃水浴中回流数小时,经水解,缩聚成凝胶。制得     

Investigations of the EPR zero-field splitting and the defect structure for Mn(2+) and Fe(3+) ions in anatase crystals

The EPR zero-field splittings D of Mn(2+) and Fe(3+) ions in anatase crystals at room and low temperatures are calculated from the high-order perturbation formula of zero-field splitting D for 3d(5) ions in tetragonal symmetry based on the dominant spin-orbit coupling mechanism. The calculated results are consistent with the observed values. From the calculations, Mn(2+) and Fe(3+) ions are suggested to substitute for Ti(4+) ions in anatase (in the previous paper, Mn(2+) ion was suggested at an interstitial site rather than substitutional site) and the defect structures (characterized mainly by the local oxygen parameter u) for both tetragonal Mn(2+) and Fe(3+) impurity centers are estimated. The different zero-field splitting at room and low temperatures are due mainly to the change of local oxygen parameter u with the temperature. These results are discussed.     

Titrimetric determination of microgram amounts of bismuth after precipitation as Bi[Cr(SCN)(6)] followed by thiocyanate amplification

Bismuth (10-100 mug) is precipitated as Bi[Cr(SCN)(6)]. After filtration, the precipitate is treated with bicarbonate solution, and the thiocyanate dissolved is oxidized by iodine in alkaline medium to sulphate. After acidification, the excess of iodine is extracted into chloroform, and the iodide in the aqueous solution is amplified by bromine oxidation and subsequent treatment with more iodide. The titrimetric procedure provides 228 iodine atoms for each original bismuth ion. Only Hg(2+)(2), Hg(2+) and AsO(3-)(4) interfere seriously.     

Potentiometric titration of Bi, Cu, Cr and V with ferrous sulphate solution in alkaline glycerol medium

Summary A potentiometric method is described for the determination of Bi(III), Cu(II), V(V) and Cr(VI) in alkaline glycerol medium by ferrous sulphate solution. Errors are below ±1.5%. Furthermore, the Fe(II)-glycerol complex is used for the detection of Ag(I), Au(III), Bi(III), Cn(II), Hg(II) and Pd(II).

---

Zusammenfassung Ein Verfahren zur potentiometrischen Bestimmung von Bi(III), Cu(II), V(V) und Cr(VI) in alkalischer Glycerinlösung mit Fe(II)-Lösung wird mitgeteilt. Die Fehler liegen unter ± 1,5%. Au\erdem wird eine Nachweismethode für Ag(I), Au(III), Bi(III), Cu(II), Hg(II) und Pd(II) beschrieben, die ebenfalls auf der Reduktion mit Hilfe des Fe(II)-Glycerinkomplexes beruht.

     

Synthesis and characterization of heterodinuclear Ln(3+)-Fe3+ and Ln(3+)-Co3+ complexes,bridged by cyanide ligand (Ln3+ = lanthanide ions). Nature of the magnetic interaction in the Ln(3+)-Fe3+ complexes

The reaction of Ln(NO3)3.aq with K3[Fe(CN)6] or K3[Co(CN)6] in N,N'-dimethylformamide (DMF) led to 25 heterodinuclear [Ln(DMF)4(H2O)3(mu-CN)Fe(CN)5].nH2O and [Ln(DMF)4(H2O)3(mu-CN)Co(CN)5].nH2O complexes (with Ln = all the lanthanide(III) ions, except promethium and lutetium). Five complexes (Pr(3+)-Fe3+), (Tm(3+)-Fe3+), (Ce(3+)-Co3+), (Sm(3+)-Co3+), and (Yb(3+)-Co3+) have been structurally characterized; they crystallize in the equivalent monoclinic space groups P21/c or P21/n. Structural studies of these two families show that they are isomorphous. This relationship in conjunction with the diamagnetism of the Co3+ allows an approximation to the nature of coupling between the iron(III) and the lanthanide(III) ions in the [Ln(DMF)4(H2O)3(mu-CN)Fe(CN)5].nH2O complexes. The Ln(3+)-Fe3+ interaction is antiferromagnetic for Ln = Ce, Nd, Gd, and Dy and ferromagnetic for Ln = Tb, Ho, and Tm. For Ln = Pr, Eu, Er, Sm, and Yb, there is no sign of any significant interaction. The isotropic nature of Gd3+ helps to evaluate the value of the exchange interaction.