Construction of a permanganate ion-selective electrode and its application to potentiometric titrations

The construction of a liquid-membrane type permanganate ion-selective electrode and its application to potentiometric titrations are described. The benzylcetyldimethylammonium-permanganate ion-pair in the aqueous phase is easily extracted into nitrobenzene and the extract is employed as the liquid ion-exchange membrane of the ion-selective electrode. The electrode gives Nernstian response to permanganate in the concentration range from 10(-6) to 10(-1)M, and the potential is almost independent of pH over the range from 3.0 to 10.5. The electrode can be used as indicator electrode in potentiometric titrations with permanganate.     

Construction of a liquid-membrane type periodate ion-selective electrode and its application to the potentiometric titration of alpha-diols and alpha-amino-alcohols

The construction of a liquid-membrane type periodate ion-selective electrode and its application to the potentiometric titration of alpha-diols and alpha-amino-alcohols are described. The ion-pair of periodate anion with Capriquat (tri-n-octylmethylammonium chloride), is easily extracted into nitrobenzene, and this extract is employed as a liquid ion-exchange membrane. The calibration curve shows Nernstian response towards periodate ion over the concentration range from 10(-1)M to 10(-7)M with a slope of 60 mV/pIO(-)(4). Selectivity coefficients with respect to various ions were evaluated. The electrode potential was independent of pH in the range 2.5-7.5. Some alpha-diols and monoethanolamine were successfully titrated potentiometrically with the aid of the present electrode.     

Spectrophotometric determination of vitamin E (alpha-tocopherol) using copper(II)-neocuproine reagent

A coated graphite-epoxy ion-selective electrode for bismuth(III), based on the ion-pair between the [Bi(EDTA)](-) anion and tricaprylylmethylammonium cation (Aliquat 336S) incorporated onto a poly(vinylchloride) (PVC) matrix is constructed. A thin membrane film of this ion-pair, dibutylphthalate (DBPh) or ortho-nitrophenyloctylether (o-NPOE) in PVC was deposited directly onto a Perspex(R) tube which contained a graphite-epoxy conductor substrate attached to the end of a glass tube. The coating solution was prepared by dissolving 30% (w/w) of PVC in 10 ml of tetrahydrofuran following addition of 65% (w/w) DBPh or o-NPOE and 5% (w/w) of the ionic pair. The effect of pH, EDTA concentration and some cation and anion on the electrode response is investigated. The bismuth(III) ion-selective electrode shows a linear response in the bismuth(III) concentration range from 1.0 x 10(-8) to 1.0 x 10(-1) mol 1(-1) and 1.0 x 10(-7) to 1.0 x 10(-1) mol 1(-1) and a slope of 56.8 and 59.2 mV dec.(-1) for the polymeric membranes containing DBPh and o-NPOE, respectively. The lifetime of this electrode was superior to 1 year (over 1600 determinations for each polymeric membrane), with practical detection limits of 6.3 x 10(-9) and 4.4 x 10(-8) mol 1(-1) with these plasticizers. Application of this electrode with bismuth(III) determination in a stomach anti-acid sample is described.     

Novel PVC-based copper(II) membrane sensor based on 2-(1'-(4'-(1'-hydroxy-2'-naphthyl)methyleneamino)butyl iminomethyl)-1-naphthol.

A copper(II) ion-selective PVC membrane sensor based on 2-(1'-(4'-(1'-hydroxy-2'-naphthyl)methyleneamino)butyl iminomethyl)-1-naphthol (BHNB) as a novel Schiff base containing a sensing material has been successfully developed. The sensor exhibits a good linear response of 29 mV per decade within the concentration range of 10(-1)-10(-6) M of Cu2+. The sensor shows good selectivity for copper(II) ion in comparison with alkali, alkaline earth, transition and heavy metal ions. The BHNB-based sensor is suitable for use with aqueous solutions of pH 3.5-7.0 and displays minimal interference by Sr(II), Cd(II), Hg(II), Zn(II) and Pb(II), which are known to interfere with other previously suggested electrodes. The proposed membrane electrode was used as a sensor for determining the Cu(II) content in black tea samples. It was also applied as an indicator electrode in the potentiometric titration of Cu2+ ions with EDTA.     

Liquid-membrane dodecylbenzenesulphonate ion-selective electrode employing Victoria Blue as the counter-ion

The dodecylbenzenesulphonate anion forms an ion-pair with the Victoria Blue cation and this is easily extracted into nitrobenzene. It was found that the calibration curve of the dodecylbenzenesulphonate ion-selective electrode based on this system shows good linearity in the range 10(-3)-10(-7)M. Selectivity coefficients were evaluated for some anions. The results indicated a poor tolerance towards dodecyl sulphate, perchlorate and periodate. Dodecyl sulphate, dodecylbenzenesulphonate and several kinds of synthetic anionic detergents have been successfully titrated potentiometrically with a solution of Zephiramine (benzyldimethyltetradecylammonium chloride) by using the electrode as an indicator electrode.     

Optimization of polymeric triiodide membrane electrode based on clozapine-triiodide ion-pair using experimental design

Central composite design (CCD) and response surface methodology (RSM) were developed as experimental strategies for modeling and optimization of the influence of some variables on the performance of a new PVC membrane triiodide ion-selective electrode. This triiodide sensor is based on triiodide-clozapine ion-pair complexation. PVC, plasticizers, ion-pair amounts and pH were investigated as four variables to build a model to achieve the best Nernstian slope (59.9 mV) as response. The electrode is prepared by incorporating the ion-exchanger in PVC matrix plasticized with 2-nitrophenyl octal ether, which is directly coated on the surface of a graphite electrode. The influence of foreign ions on the electrode performance was also investigated. The optimized membranes demonstrate Nernstian response for triiodide ions over a wide linear range from 5.0 x 10(-6) to 1.0 x 10(-2)mol L(-1) with a limit of detection 2.0 x 10(-6) mol L(-1) at 25 degrees C. The electrodes could be used over a wide pH range 4-8, and have the advantages of easy to prepare, good selectivity and fast response time, long lifetime (over 3 months) and small interferences from hydrogen ion. The proposed electrode was successfully used as indicator electrode in potentiometric titration of triiodide ions and ascorbic acid.     

A chlorate ion-selective electrode based on a poly(vinyl chloride)-matrix membrane

An electrode has been prepared, consisting of a PVC membrane containing Corning 477316 nitrate liquid ion-exchanger in the chlorate form, which responds to chlorate ions. It has a faster response (1-2 sec) and lower limit of detection (3 x 10(-5)M) than the nitrate electrode for chlorate determination. Selectivity coefficients for the electrode towards several other ions have been measured.     

A new liquid-membrane electrode for selective determination of perchlorate

A new liquid-membrane electrode which responds to perchlorate ion is described. It incorporates a 10(-2)M solution of the nitron-perchlorate ion-pair complex, in nitrobenzene, as a liquid membrane. The electrode exhibits near-Nernstian response for 10(-2)-2 x 10(-5)M perchlorate with an anionic slope of 56 mV pClO (4)). The response time is 20-90 sec, the working pH 2.5-8.5, the lower limit of detection 8 x 10(-6)M perchlorate and the selectivity for perchlorate relative to 27 inorganic and organic anions of different nature is reasonably high. Periodate, permanganate and thiocyanate, however, interfere. Determination of 2-1000 microg ml perchlorate in aqueous solutions shows an average recovery of 98.8% and a mean relative standard deviation of 1.9%. The electrode has been successfully used for direct potentiometric determination of the purity of perchlorate propellants and the solubility products of some sparingly soluble perchlorates.     

Potential response of liquid ion-exchange membrane electrodes with a weak-acid anion as primary ion, and its dependence on pH

The potential of a liquid ion-exchange membrane electrode with a weak-acid primary anion has been studied in the pH range 1-12. A mathematical model has been designed for describing the dependence of the potential on pH and including changes of the activity of the primary anion A(-) (of a mono- or dibasic acid) in a test solution, extraction of the membrane ion-exchanger into the test solution by protonation in the acidic region, interference by HSO(-)(4) during adjustment of pH with sulphuric acid.     

一种新的氰亚金酸根离子选择电极装置的研究

以十六烷基三辛基氰亚金酸铵作离子交换剂制备了PVC敏感膜,并用铂丝插入0.01MKAu(CN)₂-0.01MK₃Fe(CN)₆-0.01MK₄Fe(CN)₆溶液中作内参比体系,制成Au(CN)₂^-离子选择电极,测试了电极的各种主要性能,还测试了对十七种阴离子的电位选择性系数,并对其规律进行了讨论。     

Poly(vinyl chloride) matrix membrane electrode for the selective determination of heroin (diamorphine) in illicit powders

The potentiometric response characteristics of a poly(vinyl chloride) membrane electrode for heroin based on its ion-pair complex with tetraphenylborate were examined. The influence of pH, temperature and time on the performance of the electrode system was investigated. The electrode shows a near-Nernstian response over the heroin concentration range 10(-2)-10(-4) M with good precision. The mean relative standard deviation for the determination of heroin in 40 micrograms ml-1(-1) mg ml-1 aqueous heroin hydrochloride solutions is 1.2%. The electrode exhibits good selectivity for heroin in the presence of a number of adulterants and basic organic compounds commonly present in illicit heroin powders. The method was applied to the direct potentiometric determination of heroin in illicit powders (10-36% heroin) and the results agreed fairly well with those obtained by gas - liquid chromatography.     

Construction and performance characteristics of new fentanyl-selective plastic membrane electrode.

The construction and performance characteristics of an ion-selective electrode for fentanyl-drug cation, based on an ion-pair complex with tetrakis[3,5-bis-(trifluoromethyl)phenyl]borate anion in a PVC matrix were studied. A linear response for 1 x 10(-5) mol dm-3 to 1 x 10(-2) mol dm-3 drug with a slope of 57.9 +/- 0.5 mV/decade was established. The optimum pH range was 2 to 6. The lower detection limit was 6.29 x 10(-6) mol dm-3 fentanyl citrate (2.1165 micrograms cm-3 fentanyl). There were negligible interferences from a number of inorganic cations, structural analogues, and some common drug additives in injections. The electrode proposed has been successfully applied to determine fentanyl citrate in injections. The results correlated well with those obtained by the United States Pharmacopoeia standard procedure.     

Zirconium(IV) phosphosulphosalicylate-based ion selective membrane electrode for potentiometric determination of Pb(II) ions

Zirconium(IV) phosphosulphosalicylate, a cation exchanger was synthesized by mixing zirconium oxychloride to a mixture of 5-sulphosalicylic acid and phosphoric acid. The material showed good efficiency for the preparation of an ion-selective membrane electrode. The membrane was characterized affinity for Pb(II) ions. Due to its Pb(II) selective nature, the ion-exchanger was used as an electroactive by XRD and SEM analysis. The electrode responds to Pb(II) ions in a linear range from 1 × 10⁻⁵ to 1 × 10⁻¹ M with a slope of 43.8 mV per decade change in concentration with detection limit of 4.78 × 10⁻⁶ M. The life span of electrode was found to be 90 days. The proposed electrode showed satisfactory performance over a pH range of 4.0–6.5, with a fast response time of 15 s. The sensor has been applied to the determination of Pb(II) ions in water samples of different origins. It has also been used as indicator electrode in potentiometric titration of Pb(II) ion with EDTA.     

Use of ethylene-vinyl-acetate as a new membrane matrix for calcium ion-selective electrode preparation

A new polymer matrix based membrane electrode with an ion-exchanger responding to calcium was constructed by dissolving the copolymer ethylene-vinyl-acetate together with the ion-exchanger in chloroform in the presence of a mixture of dioctylphthalate-nitrobenzene as plasticizer. The ion-exchanger used as the electroactive component was calcium didecyl phosphate in di-(n-octylphenyl) phosphonate (Orion). This electrode exhibited near-Nernstian response over the concentration range 10(-1)-4 x 10(-6)M calcium. The pH did not affect the electrode performance within the range 8-11. Response time varied from 15 to 120 sec and the lifetime exceeded six months. The membrane is subject to static charge buildup, but this is avoided by controlling the level of dryness of the membrane. Selectivity coefficients determined for both monovalent and divalent cations showed negligible interference by most of these ions. The electrode was applied successfully to the determination of calcium in commercial mineral waters.     

基于离子液体的硫酸根离子选择电极的研究

将离子液体BMIMPF6应用于传感膜中制备硫酸根选择性电极,研究发现离子液体在电极中不仅能够提高传感膜的介电常数和传导速率,还与硫酸根离子发生相互作用,起到载体的功能。利用离子液体和硫脲的协同作用制备的电位传感器,对硫酸根离子在10-5～10-2 mol/L范围内有能斯特响应,同时具有pH干扰小,重复性好,响应时间快等特点,能够用于环境和生物医疗检测。     

Interference studies on a PVC-matrix membrane calcium ion-selective electrode based on calcium bis-di[4-(1,1,3,3-tetramethylbutyl)phenyl] phosphate as sensor and tri-n-pentyl phosphate as solvent mediator

Interference potentials, E(M), defined as the difference between the observed potential and the potential calculated assuming that there is no interference, have been determined, and their fit to the equation E(M) = -(RT/F) 1n [1 + K(M)a(B)/(a(Ca))1 2 (z(B)) discussed for a PVC-matrix membrane calcium ion-selective electrode based on calcium bis-di[4-(1,1,3,3-tetramethylbutyl)phenyl]phosphate as sensor with tri-n-pentyl phosphate as solvent mediator in mixed solutions of CaCl(2)BCl(x), where B = Li, Na, K, Mg, Zn or Cu, at total ionic strengths of 0.2, 0.4 and 0.6. Generally, K(M) for the alkali metal ions is considerably less for this electrode than for a comparison electrode based on Orion 92-20-02 liquid ion-exchanger in PVC. Occasionally, the data do not fit the equation. Thus, particularly for the bivalent ions, although the plots of exp[-E(M)F/RT] vs. a(B)/(a(Ca))1 2 (z(B)) are usually linear, they frequently do not intercept the ordinate at 1.00 and/or may give negative slopes and hence negative K(M) values.     

The ion-pair formation between dodecylsulfate and ammine-complexes of copper(II), nickel(II), zinc(II), palladium(II) and platinum(II), and the extraction behavior of the ammine-complexes by using sodium dodecylsulfate

A micellar solution of sodium dodecylsulfate (SDS) exhibits the property of being separated into two phases due to a temperature change or the addition of salts. The ammine-complexes of copper(II), nickel(II) and palladium(II) reacted with the dodecylsulfate anion to form the corresponding ion-pair, and were extracted into the SDS gel phase. The SDS plays the roles of a pairing-ion for the ammine-complexes and of an extraction medium. The ion-pair extraction mechanism was investigated; the extractability of metals was given by the function of the solubility products of the ion-pairs. This method was applied to the mutual separation of Ni(II)/Cu(II) and Pd(II)/Pt(II). The driving force for the extraction was an electrostatic interaction between the cationic complex and the surfactant anion. The use of the SDS gel as ion-exchanger is also expected.     

Bis(2-hydroxyacetophenone)ethylenediimine as a neutral carrier in a coated-wire membrane electrode for lead(II).

A coated-wire ion-selective electrode (CWISE), based on a Schiff base as a neutral carrier, was successfully developed for the detection of Pb(II) in aqueous solution. CWISE exhibited a linear response with a Nernstian slope of 29.4 +/- 0.5 mV/decade within the concentration range of 1.0 x 10(-5) - 1.0 x 10(-1) M lead ion. CWISE has shown detection limits of 5.0 x 10(-6) M. The electrode exhibited good selectivity over a number of alkali, alkaline earth, transition and heavy metal ions. This sensor yielded a steady potential within 10 to 20 s at a linear dynamic range. The electrode was suitable for use in aqueous solutions in a pH range of 2.0 to 5.0. Applications of this electrode for the determination of lead in real samples and as indicator electrode for potentiometric titration of Pb2+ ion using K2CrO4 are reported.     

Plastic membrane electrodes responsive to beta-blocker drugs

The construction and performance characteristics of ion-selective PVC membrane electrodes for metoprolol, propranolol and timolol are described. The electrodes, based on ion-pair complexes with dinonylnaphthalenesulphonate or with tetra(2-chlorophenyl)borate show near-Nernstian responses down to 10(-5)M drug concentration. Their selectivity relative to various inorganic and organic cations is reported. Direct potentiometry is used to determine beta-blocker drugs both in aqueous solutions and pharmaceutical preparations, with good results.     

A new liquid membrane electrode for the selective determination of perrhenate

A new perrhenate ion-selective electrode has been developed, incorporating a nitrobenzene solution of nitron perrhenate as a liquid membrane. The electrode gives near-Nernstian response to 3 x 10(-5)-10(-2)M perrhenate over the pH range 3-8. Most common anions (except for periodate and perchlorate) give little interference. The electrode has been satisfactory for direct potentiometric determination of as little as 10 mu/ml rhenium. The average recovery and standard deviation were 99% and 2.1%, respectively. Measurements of the solubility products of some sparingly soluble perrhenates gave results that agreed closely with those recorded in the literature and obtained by other procedures.