The extraction of molybdenum(VI) from perchloric acid solution by tri-n-butyl phosphate

The extraction of molybdenum(VI) by tri-n-butyl phosphate (TBP) from 1 M NaClO₄ medium has been investigated as a function of molybdenum concen     

Application of modified counter-current technique to the determination of tungsten in molybdenum

More than trace amounts of molybdenum interfere in the determination of tungsten by the dithiol method. A simplified counter-current extraction method is described which allows the determination of 5 p.p.m. or more of tungsten in a molybdenum matrix. The optimum conditions for the separation were a 6 M HCL-2.4 M HF medium and methyl isobutyl ketone as extractant; the percentage extractions in a single pass were 85% and 15% for molybdenum and tungsten, respectively.     

Determination of molybdenum in ores, iron and steel by atomic-absorption spectrophotometry after separation by alpha-benzoinoxime extraction or further xanthate extraction

A simple and moderately rapid method for determining 0.001% or more of molybdenum in ores, iron and steel is described. After sample decomposition, molybdenum is separated from the matrix elements, except tungsten, by chloroform extraction of its alpha-benzoinoxime complex from a 1.75 M hydrochloric-0.13 M tartaric acid medium. Depending on the amount of tungsten present, molybdenum, if necessary, is back-extracted into concentrated ammonia solution and subsequently separated from coextracted tungsten by chloroform extraction of its xanthate complex from a 1.5M hydrochloric-0.13M tartaric acid medium. It is ultimately determined by atomic-absorption spectrophotometry, at 313.3 nm, in a 15% v/v hydrochloric acid medium containing 1,000 microg/ml of aluminium as the chloride, after evaporation of either extract to dryness with nitric, perchloric and sulphuric acids and dissolution of the salts in dilute ammonia solution.     

Investigation of the extraction equilibrium of ion-association complexes of molybdenum (VI) with some polyphenols and thiazolyl blue. extraction-spectrophotometric determination of molybdenum

The extraction process of ternary ion-association complexes of molybdenum (VI) with some polyphenols (4-nitrocatechol, 2,3-dihydroxy naphthalene) and thiazolyl blue has been investigated by using an extraction-spectrophotometric method. The optimum conditions for their quantitative preparation in aqueous medium and subsequent extraction into an organic solvent have been found. The extraction, distribution and association constants, and the recovery factors have been calculated. The composition of the complexes has been determined. A precise, sensitive and simple extraction-spectrophotometric method for determination of molybdenum in products from ferrous metallurgy has been developed.     

Spectrophotometric determination of molybdenum and tungsten in niobium with dithiol

A new procedure for the determination of molybdenum and tungsten in niobium has been developed. The method involves the formation of the intensely colored complex of molybdenum with toluene-3,4-dithiol in an aqueous medium and its extraction into carbon tetrachloride followed by the reduction of tungsten and the formation and extraction of its complex. The recommended reagent is stable for at least 90 days. Both the molybdenum and the tungsten dithiol complexes are formed quantitatively within 5 min. Interlaboratory evaluation of the method reveals within-laboratory and between-laboratory relative standard deviations of about 1.5% and 2.9% respectively.     

Determination of molybdenum and tungsten at trace levels in rocks and minerals by solvent extraction and X-ray fluorescence spectrometry

Separation by solvent extraction followed by X-ray fluorescence spectrometry has been used for determination of molybdenum and tungsten in rocks and minerals. Samples are decomposed either by heating with a mixture of hydrofluoric acid and perchloric acid or by fusion with potassium pyrosulphate, followed by extraction of molybdenum and tungsten with N-benzoylphenylhydroxylamine in toluene from 4-5M sulphuric acid medium. The extract is collected on a mass of cellulose powder, which is dried in vacuum, mixed thoroughly and pressed into a disc for XRF measurements. The method is free from all matrix effects and needs no mathematical corrections for interelement effects. The method is suitable for determination of molybdenum and tungsten in geological materials down to ppm levels, with reasonable precision and accuracy.     

Determination of Molybdenum(VI) At Trace Levels by a Catalytic Polarographic Method

Abstract

ARSTRACT

A d.c. polarography method for molybdenum (VI) determination at trace levels has been developed. The reaction is catalytic between molybdenum, salicylaldoxime (SCAD) and bromate in acetic-acetate medium. The obtained peak is proportional to molybdenum (VI) concentrations in the range 1.08.10^?a to 1.37.10^?6 M. The proposed procedure is selective, the most serious interferents being W(VI), Pb(II) and Fe(II). It is applied to molybdenum determination in steel samples after iron extraction by ethyl ether.     

二-（2-乙基己基）磷酸P204与三烷基叔胺N235协同萃取钼

研究了P204（二-(2-乙基己基)磷酸, HA）和N235（三烷基胺, R3N）二元体系在HCl介质中对金属钼的萃取,结果表明P204和N235混合萃取剂在萃取钼时存在协同效应,并且在N235摩尔分数为0.7时协萃系数为2.24;考察了溶液酸度、P204或N235浓度及温度对萃取钼的影响,确定了协萃络合物为(R3NH)3•HMo8O26•2(HA),并比较了负载前后有机相的红外光谱。     

Differential pulse polarographic determination of molybdenum after separation by 8-hydroxyquinoline extraction into dichloromethane

A polarographic investigation of several metal 8-hydroxyquinolinates in dichloromethane medium following solvent extraction has been made. From the data obtained, a selective, specific and sensitive method for the determination of molybdenum at ng ml levels has been developed involving direct differential pulse polarographic measurement on the dichloromethane extract. In this work, EDTA is used as an effective masking agent to separate molybdenum from other metals. The proposed method has been applied to the determination of molybdenum in a variety of steels and NBS-SRM 1577 bovine liver with good accuracy and precision.     

Separation studies of molybdenum(VI) and rhenium(VII) using TPPO as an extractant

A simple, rapid and reproducible method for the extractive separation of molybdenum(VI) and rhenium(VII) is proposed using triphenylphosphine oxide (TPPO) dissolved in toluene as an extractant. The extractions are carried out from the hydrochloric and hydrobromic acid medium. The extraction of molybdenum is quantitative from 2.54-3.10 M hydrochloric acid and from 3.76-3.98 M hydrobromic acid, and that of rhenium is from 6.78-7.91 M hydrochloric acid. The probable nature of the extractable species is established using log distribution ratio-log concentration plots. The method permits mutual separation of molybdenum(VI) and rhenium(VII) and is applicable for the analysis of alloys and pharmaceutical sample. The detection limits for molybdenum(VI) and rhenium(VII) are 0.8 ppm and 4 ppm respectively.     

Extraction of molybdenum by a supported liquid membrane method

This is a report on the extraction of molybdenum(VI) ions using a supported liquid membrane, prepared by dissolving in kerosene, the extractant Alamine 336 (a long-chain tertiary amine) employed as mobile carrier. A flat hydrophobic microporous membrane was utilised as solid support. Appropriate conditions for Mo(VI) extraction through the liquid membrane were obtained from the results of liquid-liquid extraction and stripping partition experiments. The influence of feed solution acidity, the carrier extractant concentration in the organic liquid film and the content of strip agent on the metal flux through membrane were investigated. It was established that maximal extraction of metal is achieved at a pH 2.0 if sulphuric acid is used in the feed solution and at a pH value over 11.0 if Na₂CO₃ is used as strip agent. Moreover, the molybdenum extraction through membrane is enhanced when a 0.02 mol l⁻¹ content of the amine carrier in the organic phase is used. The present paper deals with an equilibrium investigation of the extraction of Mo(VI) by Alamine 336 and its permeation conditions through the liquid membrane, and examines a possible mechanism of extraction.     

Spectrophotometric determination of arsenic in concentrates and copper-base alloys by the molybdenum blue method after separations by iron collection and xanthate extraction

A method for determining 0.0001-1% of arsenic in copper, nickel, molybdenum, lead and zinc concentrates is described. After sample decomposition, arsenic is separated from most of the matrix elements by co-precipitation with hydrous ferric oxide from an ammoniacal medium. Following reprecipitation of arsenic and iron, the precipitate is dissolved in approximately 2 M hydrochloric acid and the solution is evaporated to a small volume to remove water. Arsenic(V) is reduced to the tervalent state with iron(II) and separated from iron, lead and other co-precipitated elements by chloroform extraction of its xanthate from an 11M hydrochloric acid medium. After oxidation of arsenic(III) in the extract to arsenic(V) with bromine-carbon tetrachloride solution, it is back-extracted into water and determined by the molybdenum blue method. Small amounts of iron, copper and molybdenum, which are co-extracted as xanthates, and antimony, which is co-extracted to a slight extent as the chloro-complex under the proposed conditions, do not interfere. The proposed method is also applicable to copper-base alloys.     

Extractive spectrophotometric determination of molybdenum(V) in molybdenum steels

An extraction spectrophotometric method has been developed for the determination of traces of molybdenum present in molybdenum steels which is based on the extraction of the orange-red molybdenum-thiocyanate-acetonethiosemicarbazone complex into chloroform from hydrochloric acid medium. The complex has an absorption maximum at 472 nm with a molar absorptivity of 1.9 × 10⁴ liters mol⁻¹ cm⁻¹. Beer's law is valid over the concentration range 0.1–9.5 ppm of molybdenum with an optimum concentration range of 0.4–9 ppm. The equilibrium shift method indicates 1:4:2 composition for molybdenumthiocyanate-acetonethiosemicarbazone complex. The effect of acidity, reagent concentrations, temperature, and interferences from various ions are reported.     

Iron-Containing Metalworking Wastes as a Chemosorbent for Wastewater Treatment from Molybdenum Ions

The extraction mechanism of molybdenum(VI) ions from model solutions with iron-containing metalworking wastes is studied. The experimental X-ray phase analysis and energy dispersive microanalysis data indicate that iron(III) molybdate appears in the first chemisorption stages with the subsequent formation of layers enriched in molybdenum(VI) oxide. The kinetics of the chemisorption of molybdenum(VI) ions from model solutions with iron-containing metalworking wastes is studied. We showed that the total exchange capacity of the modified steel chips having a specific surface of more than 15 cm2/g relative to molybdenum(VI) ions is limited only by the corrosion rate of steel chips and is achieved after its complete dissolution. The effectiveness of the chemisorption process is found. We also showed that iron-containing metalworking waste may be used for the purification of wastewater from molybdenum(VI) ions to the standard values.     

Separation of tungsten from molybdenum by liquid-liquid extraction and extraction chromatography using thiocyanate and a quaternary ammonium salt

Methods were developed for the separation of tungsten from molybdenum by liquid-liquid extraction and extraction chromatography using thiocyanate and a quaternary ammonium salt, Zephiramine. Tungsten was extracted into chloroform as an ion associate of tungsten(V)-thiocyanate complex and Zephiramine cation was retained on a column of Teflon powder coated with Zephiramine, but molybdenum(III) was neither extracted nor retained. The extraction chromatographic method was successfully applied to the determination of trace amounts of tungsten in molybdenum by neutron activation analysis.     

Separation of molybdenum from interfering elements by extraction as phosphomolybdenum blue

A simple method is described for the separation of molybdenum from titanium, zirconium, chromium, manganese, iron, cobalt, nickel, uranium and aluminium in a wide variety of samples in <30 min. Phosphomolybdenum blue is produced by boiling for 2 min a molybdate solution containing phosphate to give Mo/P = 20-37 (w/w) with hydrazine sulphate in 0.1N sulphuric acid. The volume and acidity are adjusted to give a molybdenum concentration of 0.6-5 my/ml in 0.4-0.5N sulphuric acid. The phosphomolybdenum blue is 99.5% extracted with methyl isobutyl ketone in a single extraction. The residual molybdenum and hydrazine in the aqueous phase are oxidized with a few drops of liquid bromine and the molybdenum is quantitatively extracted with the same solvent from 1N sulphuric acid as its reddish brown thiosulphato complex. The molybdenum is stripped by ammonia-hydrogen peroxide solution. The back-extract is heated to boiling and filtered to remove the insoluble hydroxides of traces of accompanying elements. The thiosulphate in the filtrate is destroyed by boiling for 4-5 min with excess of hydrogen peroxide in slightly ammoniacal medium. The molybdenum is determined finally by cerimetry or other standard methods.     

Studies on extraction behaviour of molybdenum (VI) from acidic radioactive waste using 2(ethylhexyl) phosphonic acids,mono 2(ethylhexyl) ester (PC-88A)/<Emphasis Type="Italic">n</Emphasis>-dodecane

This paper describes the studies on the extraction of molybdenum (VI) from aqueous nitric acid medium by (2-ethylhexyl) phosphonic acid, mono (2-ethylhexyl) ester (PC-88A). The extraction affecting parameters such as concentration of HNO₃ in aqueous feed, effect of concentration of extractants, effect of diluents, and molybdenum concentration in the aqueous phase are investigated to optimize the extraction conditions for the quantitative separation of molybdenum from nitric acid medium. With increase of HNO₃ concentration in aqueous phase, percentage extraction was found to be decreased in all the cases. Percentage extraction of molybdenum increases with increase in PC-88A concentration till the 0.15 M of PC88A, and after that it becomes constant. Kerosene and n-dodecane was found to be most suitable diluents. Among the various strippants used 0.2 M (w/v) solution of Na₂CO₃ and 0.2 M (w/v) solution (NH₄)₂CO₃ are found to be the equally suitable for stripping of molybdenum from the loaded organic phase. The stripping of molybdenum from loaded organic layer by various reagents followed the order: (NH₄)₂CO₃ >Na₂CO₃ >0.1 M sodium salt of EDTA >2 M NaOH >8 M HNO₃. The optimized process conditions are employed to extract molybdenum (VI) from actual Davies–Gray waste as well as from diluted high level waste generated in the purex stream. More than 94% Mo(VI) was extracted from radioanalytical as well as from high level waste of purex process and quantitative recovery was achieved in both the cases when 0.2 M sodium carbonate was used as stripping agent.     

Substituted ethan phosphonic acid esters as reagents for the separation of molybdenum from rhenium by solvent extraction

New esters of the ethan phosphonic acids have been synthesized and their extraction properties studied with respect to Mo(VI), Re(VII), Fe(III),Au(III),Tl(III) and Sb(V). A possibility is shown for the analytical separation of molybdenum from rhenium (beta = 700). The state of these new extraction agents in carbon tetrachloride solution, and the mechanism of the extraction processes, have been investigated by means of infrared spectra.     

Speciation, liquid-liquid extraction, sequential separation, preconcentration, transport and ICP-AES determination of Cr(III), Mo(VI) and W(VI) with calix-crown hydroxamic acid in high purity grade materials and environmental samples

A new functionalized calix[6]crown hydroxamic acid is reported for the speciation, liquid-liquid extraction, sequential separation and trace determination of Cr(III), Mo(VI) and W(VI). Chromium(III), molybdenum(VI) and tungsten(VI) are extracted at pH 4.5, 1.5 M HCl and 6.0 M HCl, respectively with calixcrown hydroxamic acid (37,38,39,40,41,42-hexahydroxy7,25,31-calix[6]crown hydroxamic acid) in chloroform in presence of large number of cations and anions. The extraction mechanism is investigated. The various extraction parameters, appropriate pH/M HCl, choice of solvent, effect of the reagent concentration, temperature and distribution constant have been studied. The speciation, preconcentration and kinetic of transport has been investigated. The maximum transport is observed 35, 45 and 30 min for chromium(III), molybdenum(VI) and tungsten(IV), respectively. For trace determination the extracts were directly inserted into the plasma for inductively coupled plasma atomic emission spectrometry, ICP-AES, measurements of chromium, molybdenum and tungsten which increase the sensitivity by 30-fold, with detection limits of 3 ng ml⁻¹. The method is applied for the determination of chromium, molybdenum and tungsten in high purity grade ores, biological and environmental samples. The chromium was recovered from the effluent of electroplating industries.     

Simultaneous spectrophotometric determination of molybdenum and selenium,and of molybdenum and tellurium

A method is reported for the extraction of molybdenum-phenylfluorone by chloroform. The extraction is complete whether perchlorate ions are present or not but the extractions in the presence of perchlorate ions gave a somewhat more sensitive procedure for the spectrophotometric determination of molybdenum in the solvent phase as the molybdenum-phenylfluorone complex.A procedure is reported for the simultaneous determination of molybdenum and selenium, and molybdenum and tellurium. The method involves first the formation and solvent extraction of the molybdenum-phenylfluorone complex by chloroform in the presence of perchlorate ions, followed by determination of selenium in the remaining aqueous phase as selenium-diethyldithiocarbamate complex after solvent extraction with 2-ethyl-1-hexanol in the presence of perchlorate ions. A similar procedure is reported for the simultaneous determination of molybdenum and tellurium except that in the determination of molybdenum, the phenylfluorone complex is extracted by chloroform in the absence of perchlorate ions. Tellurium is determined in the remaining aqueous phase as tellurium-diethyldithiocarbamate complex after solvent extraction by 2-ethyl-1-hexanol solvent extraction in the presence of perchlorate ions.