Aluminiumalkyle mit Heteroatomen Über die Reaktionen von Bis (acetylacetonato) nickel(II) mit Trimethylsilylmethyl-aluminium-Verbindungen

Aluminium Alkyls with Heteroatoms On Reactions of Bis (acetylacetonato)nickel(II) with Trimethylsilylmethyl Aluminium Compounds 2,2′-Bipyridine-bis(trimethylsilylmethyl)nickel(II) has been prepared by reaction of bis(acetylacetonato)nickel(II) with tris(trimethylsilylmethyl)aluminium or ethoxy-bis(trimethylsilylmethyl)aluminium in ether. The existence of bis(trimethylsilylmethyl)nickel(II) has been proved.     

Preparation and characterization of bis(acetonitrile)bis(acetylacetonato)technetium(III)

A new chemical species of bis(acetonitrile)bis(acetylacetonato)technetium(III), [Tc(acac)₂(CH₃CN)₂]⁺, has been prepared by the reaction of tris(acetylacetonato)technetium(III) with acetonitrile in the presence of a strong acid, perchloric or hydrochloric acid. The reaction kinetics were followed by observing spectral change of Tc(acac)₃ in the UV-visible region. The complex has been characterized by combination of elemental analyses, IR and UV-visible spectrophotometry, ion-exchange chromatography, and paper electrophoresis. Applicability of this substance to synthesize mixed-ligand technetium(III) complexes was discussed based on the solubility of this complex and the ease of substitution of the acetonitrile ligand.     

Separation and determination of trace amounts of beryllium(II), aluminium(III) and chromium(III) with chromotrope 2C chelates by RP-HPLC

A reversed-phase high-performance liquid chromatographic separation and determination of beryllium(II), aluminium(III) and chromium(III) with chromotrope 2C chelates on a C18-bonded stationary phase is reported. Methanol-water (45:55 v/v) containing 6 x 10(-3)M tetra-n-butylammonium bromide (TBAB) and 2 x 10(-2)M acetate buffer solution (pH 6.0) as mobile phase and with spectrophotometric detection at 530 nm was applied. The method has high sensitivity, the detection limits being 0.2 ppb for beryllium(I), 1 ppb for aluminium(III) and 2 ppb for chromium(III). Under the optimum conditions, most other metal ions did not interfere, e.g. up to 2 mg of Hg(II), Sn(II, IV), Pb(II), Bi(III), Ag(I), Zn(II), Cd(II), Cu(II), 1.5 mg of Fe(II), Co(II), Ni(II), 1.2 mg of Ca(II), Mg(II), Sr(II), Ba(II), 1 mg of Ga(III), In(III), 0.5 mg of Fe(III), 1 mg of Ga(III), In(III), 0.5 mg of Fe(III), 0.4 mg of Th(IV), Zr(IV). The method can be applied to the simultaneous determination of trace amounts of beryllium(II), aluminium(III) and chromium(III), in water, rice, flour and human hair samples.     

Mechanistic studies of the sensitized photoreduction of bis(acetylacetonato)copper(II) by phenylalkyl ketones

Bis(acetylacetonato)copper(II) (Cu(acac)₂) interacts with both the triplet excited state and the triplet biradical of phenylalkyl ketones which undergo the Norrish type II reaction. Mechanistic studies by static quenching methods show that the triplet biradicals interact with the paramagnetic copper species, leading to the preferential formation of cyclobutanols without the formation of new products; in the presence of Ph₃P the former interaction causes the known reduction of Cu(acac)₂) to Cu(acac)(Ph₃P)₂, with a rate constant of about 6 × 10⁹ M⁻¹ s⁻¹. It is shown that Ph₃P interacts with one reactive intermediate, the triplet excited state ketone. The results of extensive kinetic analysis strongly support the proposed reaction mechanism.     

Isolation of the mixed ligand complex of beryllium(II) with acetylacetone and thenoyltrifluoroacetone by gel permeation chromatography

Summary The mixed ligand, metal complex (acetylacetonato) (thenoryltrifluoroacetonato) beryllium(II) has been isolated from a reaction mixture of bis(acetylacetonato) beryllium(II) and bis(thenoyltrifluoroacetonato)beryllium(II) in ethyl acetate by gel permeation chromatography using Shodex 801 gel column and ethyl acetate as the solvent.     

Application of zone melting techniques to metal chelate systems-I Concentration of trace amounts of aluminium in tris(acetylacetonato)chromium(III)

The possibilities of applying the zone melting technique to metal chelates are described and discussed. The technique has been applied to the system of tris(acetylacetonato)chromium(III)-tris-(acetylacetonato)aluminium(III). The concentrating effect is not dependent upon the initial concentration of the minor component, but on the rate of zone movement. When the rate is set at 15 mm hr , the value of the distribution coefficient, 0.55-0.64, is at a minimum, and may be assumed to be the equilibrium distribution coefficient under the conditions described.     

Palladium-catalyzed carbonylative cross-coupling of organoboranes with aryl iodides or benzyl halides in the presence of bis(acetylacetonato)zinc(II)

Carbonylative cross-coupling reactions of organoboranes with aryl iodides and benzyl halides successfully catalyzed by dichlorobis(triphenylphosphine)palladium(II) in the presence of bis(acetylacetonato)zinc(II) produce unsymmetrical ketones in reasonable yields.     

Spectroscopic study of complex formation by methanol and phenyl isocyanate with bis(acetylacetonato) copper

It has been shown that the reaction of phenyl isocyanate with methanol in dioxane in the presence of bis(acetylacetonato) copper involves the formation of intermediate complexes. The isocyanate is coordinated to the copper ion of the catalyst, and the alcohol is joined to the oxygen of the chelate rings of bis(acetylacetonato) copper together and hydrogen bond. This brings the reacting molecules closer together and orients them relative to one another, thus facilitating their interaction. The phenylmethylurethan formed is also coordinated to the catalyst, and when it appears in the system, equilibrium is established between the complexes formed by the catalyst with the solvent, the isocyanate, and the urethan.     

EPR study on ligand-exchange reaction between bis(diethyldiselenocarbamato)copper(II) and some bis(acetylacetonato)copper(II) complexes

The paper is a study on the formation and properties of mixed-chelate copper(II) complexes, in which one ligand is strongly covalently bound diselenocarbamate (dsc), and the other belongs to a series of differently substituted acetylacetonates (acac), all forming weak covalent bonds. Thenoyltrifluoro- and trifluoro- substituted acetylacetonates only partly form mixed-chelate complexes, stable in toluene, benzene or dichloromethane, but gradually decomposing in chloroform or carbontetrachloride by analogy with Cu(Et(2)dsc)(2) behavior in these solvents. Hexafluoro-acetylacetonato copper(II) completely turns into a mixed-chelate Cu(dsc)(hfacac), which remains unchanged for more than 8 months of monitoring in all solvents used. The stability of Cu(dsc)(hfacac) is attributed to the reduced remaining negative charge on selenium atom embarrassing the formation of weak D-A complex with haloalkanes. The obtained EPR parameters suggest significant lowering of the contribution of the 4s AO of copper(II) in the mixed-chelate complexes. It is shown that Cu(acac)(2) does not react with Cu(Et(2)dsc)(2).     

DSC determination of the fusion and sublimation enthalpy of bis(2,4-pentanedionato)beryllium(II) and tris(2,4-pentanedionato)aluminium(III)

The sublimation enthalpy of bis(2,4-pentanedionato)beryllium(II) and of tris(2,4-pentanedionato)aluminium(III) has been determined by differential scanning calorimetry as 85.3 ± 3.5 kJ mole^?1 and 125.6 ± 3.2 kJ mole^?1, respectively. The corresponding fusion enthalpies are 15.67 ± 0.74 and 28.71 ± 1.34 kJ mole^?1, respectively.     

Determination of aluminium in molybdenum and tungsten metals, iron, steel and ferrous and non-ferrous alloys with pyrocatechol violet

A method for determining 0.001-0.10% of aluminium in molybdenum and tungsten metals is described. After sample dissolution, aluminium is separated from the matrix materials by chloroform extraction of its acetylacetone complex, at pH 6.5, from an ammonium acetate-hydrogen peroxide medium, then back-extracted into 12M hydrochloric add. Following separation of most co-extracted elements, except for beryllium and small amounts of chroinium(III) and copper(II), by a combined ammonium pyrrolidincdithiocarbamate-cupfen-on-chlorofonn extraction, aluminium is determined spectrophotometrically with Pyrocatechol Violet at 578 nm. Chromium interferes during colour development but beryllium, in amounts equivalent to the aluminium concentration, does not cause significant error in the results. Interference from copper(II) is eliminated by reduction with ascorbic acid. The proposed method is also applicable to iron, steel, ferrovanadium, and copper-base alloys after preliminary removal of the matrix elements by a mercury cathode separation.     

Preparation and crystal structure of dual-functional precursor complex bis(acetylacetonato)nickel(II) with 4-pyridyltetrathiafulvalene

A tetrathiafulvalene (TTF) derivative 4-pyridyltetrathiafulvalene (Py-TTF) was synthesized. The 1:2 Ni complex 1 of bis(acetylacetonato)nickel(II) coordinated with Py-TTF was prepared. Complex 1 crystallizes in the monoclinic space group P2(1)/c. Two pyridyl N atoms from two different molecules of Py-TTF are coordinated in the trans configuration to the Ni ion of Ni(acac)2 to form an octahedral Ni complex, which is a precursor for both conducting and magnetic materials.     

Reactions of Enone Ethylene Ketals with Methyl Diazomalonate/Bis(acetylacetonato)copper(II)

Several cyclic and acyclic enones and their ethylene ketals/acetals were reacted with dimethyl diazomalonate under bis(acetylacetonato)copper(II) catalysis. Cyclohex-2-en-1-one ( 1 ) yielded only C–H insertion products 2 and 3 , whereas but-3-en-2-one gave a cyclopropane albeit in very low yield. The ethylene ketals 6 of cyclopent-2-en-1-one and cyclohex-2-en-1-one gave the corresponding cyclopropanes 7 , which were in turn cleaved to the ketones 8 . The acetals 9 and 10 of crotonaldehyde ((E)-but-2-enal) and cinnamaldehyde ((E)-3-phenylprop-2-enal), respectively, yielded C–O insertion and [2,3]-sigmatropic rearrangement products 11b, c and 12b, c , as well as cyclopropanes 11a and 11b , all of which are polyfunctional and synthetically useful compounds.     

Application of the zone melting technique to metal chelate systems-II Concentration of a trace amount of metal acetylacetonate in chromium(III) acetylacetonate

The zone melting process was applied to tris(acetylacetonato) chromium(III) which contained a trace amount of aluminium(III), iron(III), copper(II), manganese(III), nickel(II) cobalt(III) and rhodium(III) in the forms of their acetylacetonates, and the highly purified chromium chelate was found in the top portion of a column, while the minor components except the rhodium chelate were concentrated in the bottom portion. The rhodium chelate was concentrated in the top portion. Ease of migration of the minor components during the zone melting process decreased in the order Cu, Fe, Mn, Co, Ni, Al and Rh, and was accounted for in terms of their crystal structures. Extremely slow speed of zone travel caused an increase of the distribution coefficient; this was due to back diffusion of minor components into a congealed solid phase from a molten zone.     

Separation and determination of trace amounts of aluminium(III), vanadium(V), iron(III), copper(II) and nickel(II) with CALKS and PAR by RP-HPLC.

An RP-HPLC method for the separation and determination of aluminium(III), vanadium(V), iron(III), copper(II) and nickel(II) with CALKS (Chromazol KS) and PAR ([4-(2-pyridylazo)resorcinol]) chelating on a YWG-ODS column was developed. A mixture of methanol-tetrahydrofuran(THF)-water (60:5:35 v/v) containing 0.2 mol/L LiCl, 5 x 10(-5) mol/L CALKS, 5 x 10(-5) mol/L PAR and acetate buffer solution (pH 4.9) was selected as mobile phase. The method has high sensitivity, with the detection limits being 6 ng/mL for aluminium(III), 3.5 ng/mL for vanadium(V), 10.4 ng/mL for iron(III), 6.3 ng/mL for copper(II) and 8.7 ng/mL for nickel(II). It also has good selectivity, so that most foreign metal ions do not interfere under the optimum conditions. The method can be applied to the simultaneous determination of trace amounts of aluminium, vanadium, iron, copper and nickel in rice and flour samples.     

Polymerizations of chloral,styrene oxide,and methyl methacrylate initiated by the binary system of bis(acetylacetonato)metal(II) and chloral

The binary system of bis(acetylacetonato)metal(II) [M(acac)₂] and chloral induced the polymerization of chloral [M = Mn(II), Co(II), Mg(II), and Cu(II)], the ring-opening polymerization of styrene oxide [M = Co(II) and Mg(II)], and the radical polymerization of methyl methacrylate [M = Mn(II) and Co(II)]. The similar order of activity of M(acac)₂ as the catalyst for the polymerization of chloral and for the aldol reaction of chloral with acetylacetone, the deactivation of the catalyst by the introduction of a substituent at the 3-position of M(acac)₂, the presence of saturated β-diketone at the end of the polymer of chloral and that of styrene oxide, and the visible light spectral data supporting the formation of the β-ketoalcoholate intermediate in the binary system of Co(acac)₂ and chloral are all experimental findings which suggest that M(acac)₂ is subject to the aldol addition by chloral at the 3-position of the chelated acetylacetone and that the resultant β-ketoalcoholate is a common active species for these polymerizations.     

Benzylation of alcohols by using bis[acetylacetonato]copper as catalyst

Selective O-benzylation of primary hydroxy compounds has been achieved in the presence of bis[acetylacetonato]copper with benzyl chloride. We showed that bis[acetylacetonato]copper was very efficient in promoting the benzylation of primary aliphatic alcohols versus secondary aliphatic alcohols and phenolic hydroxy groups selectively.     

过渡金属乙酰丙酮螯合物的体积排除色谱研究

用体积排除色谱方法研究了过渡金属Fe(Ⅲ)、Co(Ⅲ)、Cu(Ⅱ)、Ni(Ⅱ)的乙酰丙酮螯合物在四氢呋喃溶液中的加合和缔合行为。在溶液中乙酰丙酮钴(Ⅲ)以单个螯合物分子的形式存在,乙酰丙酮铜(Ⅱ)和乙酰丙酮铁(Ⅲ)与溶剂加合生成加合物,乙酰丙酮铁(Ⅲ)除加合物外还存在缔合度为2-10的多分散缔合物,乙酰丙酮镍(Ⅱ)水合物在四氢呋喃中产生了加合交换作用,同时存在缔合度为6左右的缔合物。色谱数据给出了螯合物、加合物及缔合物的相对含量。螯合物与相同分子量的聚苯乙烯相比,其保留体积的滞后以Ni相似文献   

Dehydroacetic acid as a reagent for the separation and gravimetric determination of copper(II), aluminium and beryllium

Dehydroacetic acid is proposed as a reagent for the gravimetric determination of copper(II), aluminium and beryllium at pH 3.0-6.0, 3.0-6.0 and 7.5-9.5 respectively. Copper is weighed as the complex Cu(C(8)H(7)O(4))(2). Aluminium and beryllium are weighed as Al(2)O(8) and BeO. The reagent is easy to prepare.     

Molecular structure of bis(acetylacetonato)beryllium in the gas phase as determined from electron diffraction data

The molecular structure of bis(acetylacetonato)beryllium has been determined by gas electron diffraction. The experimental data were found to be consistent with the D_2d model in which the oxygen atoms are arranged tetrahedrally around the central beryllium atom (∠OBeO = 106.0 ± 1.0°). The structural parameters are as follows: r_g(Be-O) = 1.615 ± 0.006 Å, r_g (C-O) = 1.270 ± 0.004 Å, r_g (C-C_ring) = 1.397 ± 0.004 Å, r_g (C-C_meth) = 1.499 ± 0.005 Å. The mean amplitudes of vibration were calculated from the normal-vibration treatment using the modified Urey—Bradley force field