Interference in the kinetic determination of ascorbic acid by sulphide and sulphite

The reduction of 2,6-dichlorophenolindophenol (DCPI) by sulphides and sulphites has been studied kinetically by the stopped-flow technique. The reaction is first-order with respect to each of the reactants. From the distribution diagrams for the species DH(+)(2), DH and D(-) for DCPI and H(2)Q, HQ(-) and Q(2-) for sulphides or sulphites, a mechanism is proposed which suggests partial reactions of all possible combinations of the reacting species at any pH. An equation for calculation of the second-order reaction rate constants k at any pH is derived, which gives k as a function of [H(+)], the partial reaction rate constants and the dissociation constants of DCPI and H(2)S or H(2)SO(3). Values of the overall reaction rate constants over a wide pH-range have been determined, together with values of k for all possible partial reactions. For particular pH-values the second-order reaction rate constant was determined by four different methods. Mean values of k = 251 +/- 1 and 240 +/- 1 l.mole(-1).sec(-1) were obtained for pH 3.15 and 4.17, respectively, for the DCPI-Na(2)S reaction and k = 137 +/- 1, 127 +/- 1 and 136 +/- 1 l.mole(-1).sec(-1) for pH 2.02, 4.25 and 5.10, respectively, for the DCPI-Na(2)SO(3) reaction. From the slopes of the linear Arrhenius plots activation energies of 6.6 +/- 0.2 and 4.0 +/- 0.1 kcal/mole for the DCPI-Na(2)S and DCPI-Na(2)SO(3) reactions, respectively were calculated. The effect of ionic strength on the reactions supports the proposed mechanism.     

Kinetic study of Berthelot reaction steps in the absence and presence of coupling reagents

Several reaction steps in the Berthelot reaction for the determination of ammonia have been separately studied. A reaction order of two has been confirmed for the reaction between HOCl and NH(3). The rate constant for this reaction has been determined to be 3.2 x 10(6)l.mole(-1).sec(-1). The first evidence for the formation of benzoquinonechlorimine is presented. Pentacyanoferrate coupling reagents which accelerate the production of indophenol have been found to operate on the reaction between NH(2)Cl and phenol. The rate constant for the final step of the reaction sequence has been determined to be 5.3 x 10(-3)l.mole(-1).sec(-1). A reaction between chlorimine and pentacyanoferrate compounds has been found to be responsible for the formation of a green product in the presence of excess of coupling reagent.     

New reagent for spectrophotometric determination of salicylic acid

In 6M hydrochloric acid solution, salicylic acid reacts with pentachloronitrosyliridate [Ir(NO)Cl(5)](-) to form a new 1:1 complex giving two absorption maxima at 369 and 446 nm with molar absorptivities both of 1.1 x 10(4) l.mole(-1) cm(-). The reaction is second order with apparent energy, E(a), of 16.8 kJ/mole. At constant temperature, the apparent rate constant k increases to a maximum when the concentration of hydrogen ion is decreased to 4-5M and the concentration of chloride ion is kept at approximately 6M. The mechanism of the reaction is also discussed. In alkaline solution, the absorption maxima shift to 381 and 506 nm with molar absorptivities of 6.0 x 10(3) and 2.4 x 10(4) l.mole(-1) cm(-1), respectively. Salicylic acid can be determined spectrophotometrically with high sensitivity and precision. Benzoic and boric acids do not interfere.     

Effects of auxiliary complex-forming agents on the rate of metallochromic indicator colour-change-III: mechanism of the colour change of tac in nickel-edta titrations

The rate of the ligand-substitution reaction of nickel(II)-TAC chelate (NiR(2)) with EDTA (Y) and 1,10-phenanthroline (X) has been determined spectrophotometrically in 20% v v dioxan over the pH range 5.7-6.3 at mu = 0.1 (KNO(3)) and 25 +/- 1 degrees . The substitution reaction with EDTA proceeds through the following two pathways: NiR(2) + H(+) right harpoon over left harpoon NiR(+) + HR, and NiR(2) + H(2)O right harpoon over left harpoon NiR(OH) + HR, The reaction of NiR(+) or NiR(OH) with EDTA is the rate-determining step, and k(1) = 2.1 x 10(3) l .mole(-1) .sec(-1) and k(2) = 7.9 x 10(6) l .mole(-1) .sec(-1).The substitution reaction with 1,10-phenanthroline proceeds as follows: NiR(+) + X right harpoon over left harpoon NiRX(+) At higher concentrations of 1,10-phenanthroline the release of TAC from NiR(2) by hydrogen ion is the rate-determining step, and k(3) = 2.4 x 10(5) l .mole(-1). sec(-1). At lower concentrations of 1,10-phenanthroline -d[NiR(2)]/dt is proportional both to [H(+)] and [X]. The value k(4) = 5.1 x 10(4) l. mole(-1). sec(-1) was calculated by the use of the steady-state approximation for [NiRX(+)]. The substitution with 1,10-phenanthroline proceeds much faster than that with EDTA. By the addition of a small amount of 1,10-phenanthroline, Ni can be titrated with EDTA at 50 degrees, with TAC as an indicator.     

Determination of rate constants by a double-line flow injection method incorporating a well-stirred tank reactor

Equations have been derived for the concentration-time profiles of reactants and products in a first order reaction obtained on passage of a reactant plug through a single well-stirred tank reactor. When taken together with the equations for physical dispersion of such a reactor under plug flow conditions, an expression for the reaction rate constant was derived which allowed its experimental determination in a relatively simple fashion. The method was tested for reactions between cerium and oxalic acid and between dichromate and ascorbic acid, for which values of the rate constants of around 2 x 10(2) sec(-1) and 5.5 x 10(3) sec(-1) were obtained. Good agreement with other experimentally determined values was obtained. The scope and the limitations of the proposed method are critically discussed with the aid of some model calculations. The range of values for which the method might be suitable is approximately 10(-3)-10(-1) sec(-1). An equation analogous to a peak-width equation was derived as a further development of this approach. Good agreement with the previously determined values were obtained for both systems. The extension of the method to reactions other than first order is discussed.     

Flow injection amperometric detection of ascorbic acid using a Prussian Blue film-modified electrode

The PB film-modified electrode was used as an amperometric detector for flow injection analysis of ascorbic acid. The modified electrode detector showed good sensitivity, stability and reproducibility. The calibration curve for ascorbic acid was linear over the concentration range from 5.0x10(-6) to 1.0x10(-3) mol l(-1) with a slope of 19.9 mA mol(-1) per litre and a correlation coefficient of 0.999. The detection limit of this method was 2.49x10(-6) mol l(-1). The relative standard deviation of six replicate injections of 2.5x10(-4) mol l(-1) ascorbic acid was 2.5%. The results obtained for ascorbic acid determination in pharmaceutical products are in good agreement with those obtained by using the procedure involving the reaction between triiodide and ascorbic acid.     

Catalytic oxidation of ascorbic acid by some ferrocene derivative mediators at the glassy carbon electrode. Application to the voltammetric resolution of ascorbic acid and dopamine in the same sample

Direct-current cyclic voltammetry is used to investigate the suitability of some ferrocene derivatives such as ferrocenecarboxylic acid, ferroceneacetic acid and ferrocenemethanol as mediators for ascorbic acid oxidation in aqueous solutions with low pH. The ascorbic acid coupled catalytically to three ferrocene derivatives exhibiting homogeneous second-order rate constants k(s), in the range 7.36 x 10(5) - 1.23 x 10(7). The catalytic oxidation peak current was linearly dependent on the ascorbic acid concentration and the linearity range obtained in the presence of ferrocenecarboxilic acid, having the largest second-order rate constant, was 5 x 10(-5) - 1.5 x 10(-3) M. The catalytic effect of the ferrocene derivatives on the electrochemical oxidation of ascorbic acid reduced the oxidation potential of ascorbic acid, resulting in the separation of the overlapping voltammograms of ascorbic acid and dopamine at the glassy carbon electrode in a mixture. This allowed the determination of ascorbic acid in the presence of dopamine. The calibration graph obtained by linear sweep voltammetry for ascorbic acid in the presence of dopamine of fixed concentration is linear in the range 5 x 10(-5) - 1.5 x 10(-3) M. In a similar manner, dopamine is determined in the presence of a high concentration of ascorbic acid, up to 100 times that of dopamine, using ferroceneacetic acid as the most suitable mediator for this purpose.     

Kinetic and mechanistic study of the reaction of 2,6-dichlorophenol-indophenol and cysteine

In this work the reaction of cysteine (H(2)Q) with 2,6-dichlorophenolindophenol (D) is studied kinetically in the pH range 2.5-9.0. Taking into consideration the distribution diagrams for the species H(3)Q(+), H(2)Q, HQ(-), Q(2-) for cysteine and DH(+)(2), DH, D(-) for 2,6-dichlorophenolindophenol the reaction rate constants k(i) for all possible combinations of the reacting species were determined. The maximum reactivity appears at pH 6.88 with an overall reaction constant k = 306 1.mole(-1).sec(-1) at 22 degrees . The effect of the concentrations of the reagents and the ionic strength on the reaction rate is also given. From Arrhenius plots an activation energy E(a) = 8.1 kcal/mole was calculated. Working curves for the determination of cysteine in aqueous solutions are also presented applying the reaction rate method. Finally the paper includes important analytical information for the calculation of the errors due to interference of cysteine by the kinetic determination of ascorbic acid, using its reaction with 2,6-dichlorophenolindophenol.     

A chitosan-multiwall carbon nanotube modified electrode for simultaneous detection of dopamine and ascorbic acid.

A chemically modified electrode based on a chitosan-multiwall carbon nanotube (MWNT) coated glassy carbon electrode (GCE) is described, which exhibits an attractive ability to determine dopamine (DA) and ascorbic acid (AA) simultaneously. The modified electrode exhibited a high differential pulse voltammetry (DPV) current response to DA at 0.144 V and AA at -0.029 V (vs. SCE) in a 0.1 mol l(-1) phosphate buffer solution (pH = 7.2). The properties and behaviors of the chitosan-multiwall carbon nanotube modified electrode (MC/GCE) were characterized using cyclic voltammetry (CV) and DPV methods. The mechanism for the discrimination of dopamine from ascorbic acid at MC/GCE is discussed. The linear calibration range for DA and AA were 5 x 10(-7) mol l(-1) to 1 x 10(-4) mol l(-1) (r = 0.997), and 5 x 10(-6) mol l(-1) to 1 x 10(-3) mol l(-1) (r = 0.996), respectively. The MC/GCE showed good sensitivity, selectivity and stability.     

Electrocatalytic determination of ascorbic acid on a glassy carbon electrode chemically modified with cobalt pentacyanonitrosylferrate.

An electrochemically prepared thin film of cobalt pentacyanonitrosylferrate (GC/CoPCNF) was used as a surface modifier for glassy carbon electrodes. The oxidation of ascorbic acid on a glassy carbon electrode modified with GC/CoPCNF as a working electrode was studied using cyclic voltammetry, rotating disk electrode (RDE) voltammetry and chronoamperometry in a 0.25 M KNO3 + 0.25 M phosphate buffer (pH 7) solution. The glassy carbon modified with CoPCNF showed good electrocatalytic activity toward ascorbic acid oxidation. The kinetics of the catalytic reaction was investigated, and the average value of the rate constant (k) for the catalytic reaction and the diffusion coefficient (D) were evaluated by different approaches for ascorbic acid, and were found to be 3.3 +/- 0.3 x 10(2) M(-1) s(-1) and 3.2 +/- 0.3 x 10(-6) cm2 s(-1), respectively.     

Mechanisms of NO release by N1-nitrosomelatonin: nucleophilic attack versus reducing pathways

A new type of physiologically relevant nitrosamines have been recently recognized, the N(1)-nitrosoindoles. The possible pathways by which N(1)-nitrosomelatonin (NOMel) can react in physiological environments have been studied. Our results show that NOMel slowly decomposes spontaneously in aqueous solution, generating melatonin as the main organic product (k = (3.7 +/- 1.1) x 10(-5) s(-1), Tris-HCl (0.2 M) buffer, pH 7.4 at 37 degrees C, anaerobic). This rate is accelerated by acidification (k(pH 5.8) = (4.5 +/- 0.7) x 10(-4) s(-1), k(pH 8.8) = (3.9 +/- 0.6) x 10(-6) s(-1), Tris-HCl (0.2 M) buffer at 37 degrees C), by the presence of O(2) (k(o) = (9.8 +/- 0.1) x 10(-5) s(-1), pH 7.4, 37 degrees C, [NOMel] = 0.1 mM, P(O(2)) = 1 atm), and by the presence of the spin trap TEMPO (2,2,6,6-tetramethylpiperidine 1-oxyl; k(o) = (2.0 +/- 0.1) x 10(-4) s(-1), pH 7.4, 37 degrees C, [NOMel] = 0.1 mM, [TEMPO] = 9 mM). We also found that NOMel can transnitrosate to l-cysteinate, producing S-nitrosocysteine and melatonin (k = 0.127 +/- 0.002 M(-1) s(-1), Tris-HCl (0.2 M) buffer, pH 7.4 at 37 degrees C). The reaction of NOMel with ascorbic acid as a reducing agent has also been studied. This rapid reaction produces nitric oxide and melatonin. The saturation of the observed rate constant (k = (1.08 +/- 0.04) x 10(-3) s(-1), Tris-HCl (0.2 M) buffer, pH 7.4 at 37 degrees C) at high ascorbic acid concentration (100-fold with respect to NOMel) and the pH independence of this reaction in the pH range 7-9 indicate that the reactive species are ascorbate and melatonyl radical originated from the reversible homolysis of NOMel. Taking into account kinetic and DFT calculation data, a comprehensive mechanism for the denitrosation of NOMel is proposed. On the basis of our kinetics results, we conclude that under physiological conditions NOMel mainly reacts with endogenous reducing agents (such as ascorbic acid), producing nitric oxide and melatonin.     

Determination of some reactive oxygen species scavengers based on the peroxidase-oxidase oscillator

This paper reports a new method for detection of ROS scavengers including superoxide dismutase, ascorbic acid and glutathione based on a 'probe' of peroxidase-oxidase biochemical oscillator. The oscillation period and amplitude change with different concentrations of scavengers. The linear ranges of superoxide dismutase, ascorbic acid and glutathione are respectively 1.56 x 10(-4)-1.56 x 10(-3) mg mL(-1), 1.75 x 10(-7)-1.75 x 10(-5) mol L(-1) and 9.38 x 10(-7)-7.5 x 10(-5) mol L(-1). The selectivity, linearity and precision for superoxide dismutase, ascorbic acid, and glutathione are presented and discussed. The results compared well with other standard methods for determination of superoxide dismutase, ascorbic acid and glutathione. Some possible steps in the overall reaction mechanisms are discussed.     

Evaluation of luminol-H(2)O(2)-KIO(4) chemiluminescence system and its application to hydrogen peroxide, glucose and ascorbic acid assays

A novel chemiluminescence (CL) system was evaluated for the determination of hydrogen peroxide, glucose and ascorbic acid based on hydrogen peroxide, which has a catalytic-cooxidative effect on the oxidation of luminol by KIO(4). Hydrogen peroxide can be directly determined by luminol-KIO(4)-H(2)O(2) CL system. The detection limit was 3.0x10(-8) mol l(-1) and the calibration graph was linear over the range of 2.0x10(-7)-6.0x10(-4) mol l(-1). The relative standard deviation of H(2)O(2) was 1.1% for 2.0x10(-6) mol l(-1) (N=11). Glucose was indirectly determined through measuring the H(2)O(2) generated by the oxidation of glucose in the presence of glucose oxidase at pH 7.6. The present method provides a source for H(2)O(2), which, in turn, coupled with the luminol-KIO(4)-H(2)O(2) CL reaction system. The CL was linearly correlated with glucose concentration of 0.6-110 mug ml(-1). The relative standard deviation was 2.1% for 10 mug ml(-1) (N=11). Detection limit of glucose was 0.08 mug ml(-1). Ascorbic acid was also indirectly determined by the suppression of luminol-KIO(4)-H(2)O(2) CL system. The calibration curve was linear over the range of 1.0x10(-7)-1.0x10(-5) mol l(-1) of ascorbic acid. The relative standard deviation was 1.0% for 8.0x10(-7) mol l(-1) (N=11). Detection limit of ascorbic acid was 6.0x10(-8) mol l(-1). These proposed methods have been applied to determine glucose, ascorbic acid in tablets and injection.     

ESR STUDIES OF CHLOROPHYLL ONE-ELECTRON PHOTOCHEMISTRY: KINETICS AND MECHANISM OF REVERSIBLE HYDROQUINONE OXIDATION IN SOLUTION*

Abstract— ESR studies have been made of the kinetics of semiquinone radical formation and disappearance resulting from the reversible photosensitization by chlorophyll of hydroquinone oxidation in a pyridine-water solvent. The rate of radical decay was found to be second order with respect to the radical concentration, with a rate constant of 6.7 × 10⁵ l./mole sec at -30°C and an activation energy of 6900 cal/mole. The rate of radical formation was recombination-limited and, through the use of β-carotene as a quencher, the rate constant was determined to be 8.81 × 10⁵ l./mole sec at -30°C. The effect of light intensity and hydroquinone concentration on the rate of semiquinone radical formation and on the steady state radical concentration was also investigated and possible mechanisms to explain the results are discussed.     

Simultaneous determination of beryllium and aluminium in mixtures using derivative spectrophotometry

The spectrophotometric determination of beryllium and aluminium with 5,8-dihydroxy-1,4-naphthoquinone in the presence of a non-ionic surfactant is reported. Absorption maxima, molar absorptivity and Sandell's Sensitivity of 1:2 (M:L) beryllium and aluminium complexes are, 585 nm and 598 nm, 1.63 x 10(4) l.mole(-1).cm(-1) and 2.04 x 10(4) l.mole(-1).cm(-1), and 0.55 ng/cm(2) and 1.32 ng/cm(2) respectively. Beer's law is obeyed between 7.20-3.96 x 10(2) ng/ml beryllium and 1.08 x 10(1)-1.08 x 10(3) ng/ml aluminium. A method for simultaneous determination of beryllium and aluminium in their mixture using derivative spectra is described. The range 3.6 x 10(1)-3.6 x 10(2) ng/ml beryllium could be determined in the presence of 1.08 x 10(2)-1.08 x 10(3) ng/ml aluminium, and vice versa.     

Studies of redox polymerization. I. Aqueous polymerization of acrylamide by an ascorbic acid–peroxydisulfate system

The polymerization of acrylamide initiated by an ascorbic acid–peroxydisulfate redox system was studied in aqueous solution at 35 ± 0.2°C in the presence of air. The concentrations studied were [monomer] = (2.0–15.0) × 10^?2 mole/liter; [peroxydisulfate] = (1.5–10.0) × 10^?3 mole/liter; and [ascorbic acid] = (2.84–28.4) × 10^?4 mole/liter; temperatures were between 25–50°C. Within these ranges the initial rate showed a half-order dependence on peroxydisulfate, a first-order dependence on an initial monomer concentration, and a first-order dependence on a low concentration of ascorbic acid [(2.84–8.54) × 10^?4 mole/liter]. At higher concentrations of ascorbic acid the rate remained constant in the concentration range (8.54–22.72) × 10^?4 mole/liter, then varied as an inverse halfpower at still higher concentrations of ascorbic acid [(22.72–28.4) × 10^?4 mole/liter]. The initial rate increased with an increase in polymerization temperature. The overall energy of activation was 12.203 kcal/mole in a temperature range of 25–50°C. Water-miscible organic solvents depressed the initial rate and the limiting conversion. The viscometric average molecular weight increased with an increase in temperature and initial monomer concentration but decreased with increasing concentration of peroxydisulfate and an additive, dimethyl formamide (DMF).     

Diffusion coefficient measurements in microfluidic devices

A glassy carbon electrode (GCE) modified with Pd/IrO(2) provides excellent electrocatalytic oxidation of hydrogen peroxide. Glucose oxidase (GOD) and xanthine oxidase (XOD) were co-immobilized on the modified electrode with a thin film Nafion coated on the enzyme layer to form a glucose (Glu)/hypoxanthine (Hx) sensor, without interference from electroactive species such as ascorbic acid (AA) and uric acid (UA). Its response was evaluated with respect to the enzyme amount on the electrode, pH and temperature of the electrolyte. The prepared bienzymic biosensor, used as the detector of HPLC gave a detection limit of 1.0x10(-6) mol l(-1) Glu and 2.0x10(-7) mol l(-1) Hx (Hx) with a linear concentration range of 5.0x10(-6)-2.5x10(-3) mol l(-1) and 1.0x10(-6)-5.0x10(-4) mol l(-1), respectively. Coupled with microdialysis, it was used to monitor the concentrations of Glu and Hx in rat brain.     

Automated flow-injection pseudotitration of strong and weak acids, ascorbic acid and calcium, and catalytic pseudotitrations of aminopolycarboxylic acids by use of a microcomputer-controlled analyser

A simple, inexpensive, fully automated spectrophotometric system for flow-injection pseudotitrations is used to perform acid-base, redox, complexometric and catalytic "titrations". Peak widths (in time units) in the range 10-100 sec can be measured with a precision of better than 0.3% in most cases. Strong and weak acids in the range 5.0 x 10(-4)-1.0 x 10(-2)M are measured by using sodium hydroxide-Bromothymol Blue "titrant". Ascorbic acid (1 x 10(-4)-1 x 10(-2)M) is "titrated" with 2,6-dichlorophenolindophenol, and calcium (5.0 x 10(-4)-5.0 x 10(-2)M) with EDTA, with calmagite as indicator in the presence of magnesium. Aminopolycarboxylic acids (5 x 10(-6)-1 x 10(-2)M) are measured by use of catalytic indication based on the manganese-catalysed periodate-diethylaniline reaction. The ascorbic acid method has been applied to analysis of pharmaceutical preparations, and the calcium method to water analysis.     

The complexes of bismuth(III) and nitrilotriacetic acid

The reaction between bismuth(III) and nitrilotriacetic acid (NTA or H(3)X) has been investigated by ultraviolet spectrophotometry. It has been established that bismuth(III) and NTA form two complexes with compositions bismuth(III): NTA = 1:1 and 1:2. The absorption maxima are at 243 nm (1:1) and 271 nm (1:2), the molar absorptivities being 8.00 x 10(3) and 8.20 x 10(3) l.mole(-1).cm(-1) respectively. The stability constants (at mu = 1.0) are: log beta(BiX) = 17.53 +/- 0.06 and log beta(B)(2)(3-) = 26.56 +/- 0.07. The possibility of the analytical application of BiX is briefly discussed.     

Spectrophotometric determination of germanium in ores, concentrates, zinc-processing products and related materials with phenylfluorone and cetyltrimethylammonium bromide after separation by iron collection and heptane extraction of germanium tetrachloride

A method for determining approximately 0.2 microg/g or more of germanium in ores, concentrates, zinc-processing products and related materials is described. The sample is decomposed by fusion with sodium peroxide and the cooled melt is dissolved in dilute sulphuric acid. Silica, if > 50 mg, is removed by volatilization with hydrofluoric acid. Germanium is separated from sodium salts by co-precipitation with hydrous ferric oxide, the precipitate is dissolved in 3M hydrochloric acid and germanium is subsequently separated from iron(III) and other co-precipitated elements by a single heptane extraction of germanium tetrachloride from approximately 9.4M hydrochloric acid. The extract is washed with 12M hydrochloric acid to remove residual iron(III), then germanium is stripped with water and determined spectrophotometrically with phenylfluorone in a 1.4M hydrochloric acid-0.002M cetyltrimethylammonium bromide medium in the presence of ascorbic acid as a reductant for co-extracted chlorine. The apparent molar absorptivity of the complex is 1.71 x 10(4) l.mole(-1).mm(-1) at 507 nm, the wavelength of maximum absorption. Up to 5 mg of tin(IV), 10 mg of antimony(V) and tungsten(VI) and approximately 50 mg of silica do not interfere. Germanium values are given for some Canadian certified reference ores, concentrates and iron-formation samples and for a metallurgical dust.