A liquid state Hg(2+)-sensitive electrode

The construction and basic characteristics of a liquid-state Hg(2+)-sensitive electrode are discussed. The membrane consists of the Hg(2+) chelate of diketohydrindylidene-diketohydrindamine (DYDA) in chloroform. The range of linear response of the electrode is 10(-1)-10(-5)M Hg(2+) with a slope of 31 mV/decade. The response time of the electrode is a few seconds in concentrated solutions. The electrode may be used with good results in potentiometric titrations involving Hg(2+).     

Organic-inorganic composite cation-exchanger: poly-o-toluidine Zr(IV) phosphate-based ion-selective membrane electrode for the potentiometric determination of mercury

A new heterogeneous precipitate of an organic-inorganic composite cation-exchanger poly-o-toluidine Zr(IV) phosphate was utilized for the preparation of a Hg(II) ion-sensitive membrane electrode for the determination of Hg(II) ions in real aqueous as well as in real samples. The electrode showed good potentiometric response characteristics, and displayed a linear log[Hg(2+)] versus EMF response over a wide concentration range of 1 x 10(-1) - 1 x 10(-6) M with a Nernstian slope of 30 mV per decade change in concentration with a detection limit of 1 x 10(-6). The membrane electrode showed a very fast response time of 5 s and could be operated well in the pH range 2 - 8. The selectivity coefficients were determined by the mixed-solution method, and revealed that the electrode was selective in the presence of interfering cations; however most of these did not show significant interference in the concentration range of 1 x 10(-1) - 1 x 10(-4) M. The lifetime of the membrane electrode was observed to be 120 days. The analytical utility of this electrode was established by employing it as an indicator electrode in the potentiometric titrations of Hg(2+) ions from a synthetic mixture as well as drain water.     

Characterization of ceramic ion-selective membrane-electrodes-I The Ag(2)S electrode

The behaviour of a new type of electrode, made from ceramic Ag(2)S, has been investigated. The electrode response is Nernstian for Ag(+) over the range 10(-6)-2M and for Hg(2+) in the concentration range 10(-6)-10(-2)M, both at constant ionic strength (0.1M). The electrode is Ag(+)-selective, with maximum interference from Hg(2+). It can be used for acid-base potentiometric titration and for potentiometric Ag(+) and Hg(2+) precipitation titrations.     

Determination of hardness in tapwater and upland soil extracts using a long-term stable divalent cation selective electrode based on a lipophilic acrylate resin as a membrane matrix

A divalent cation-selective electrode, which utilizes a lipophilic resin as a matrix for the sensing membrane, and which has long-term stability has been developed. The sensing membrane is a lipophilic acrylate resin which is impregnated with a solution of 1-decylalcohol and the calcium salt of bis[4-(1,1,3,3-tetramethylbutyl) phenyl] phosphate at concentrations of 0.08 g ml(-1) each. The electrode exhibited nearly equal selectivity to Ca(2+) and Mg(2+) ions and could be used as a water hardness sensor. The electrode shows a Nernstian response with a slope of 29 mV decade(-1) to both Ca(2+) and Mg(2+) ions in the concentration range from 10(-5) M to 10(-1) M and could be used in the pH range from 3 to 10 for the determination of 10(-3) M Ca(2+) and Mg(2+) solutions. The initial performance of the electrode could be maintained for 1 year, since the lifetime test of the electrode was conducted in tapwater at a continuous flow rate of 4 ml min(-1). The hardnesses of tapwater and upland soil extracts were determined using the developed electrode and the analytical results were in good agreement with those obtained by chelatometric titration using an EDTA solution as the titrant. A coefficient factor of correlation 0.998 was obtained between the electrode method and titrimetry. The long-term stability of the electrode was found to be due to strong affinity of 1-decylalcohol to the lipophilic acrylate resin.     

Co2+-selective membrane electrode based on the Schiff Base NADS

A new PVC membrane electrode for cobalt(II) ions based on a recently synthesized Schiff base of 5-((4-nitrophenyl)azo)- N-(2',4'-dimethoxyphenyl)salicylaldimine is reported. The electrode exhibits a Nernstian response for Co(2+) ions over a wide concentration range (9.0 x 10(-7)-1.0 x 10(-2) M) with a slope of 29(+/-1). The limit of detection is 8.0 x 10(-7) M. The proposed sensor revealed good selectivities over a wide variety of other cations including hard and soft metals. This electrode could be used in a pH range of 3.5-6.0. It was used as an indicator electrode in potentiometric titrations of cobalt(II) ions and can be used in the direct determination of Co(2+) in aqueous solutions.     

Silver(I) ion selective PVC membrane based on bis-pyridine tetramide macrocycle

A PVC membrane based on bis-pyridine tetramide macrocycle exhibits a good response for silver ion over a wide concentration range (1.0x10(-1)-4.0x10(-5) mol l(-1)). The electrode has a relatively fast response time and can be used for more than 5 months without observing any divergence. High selectivity for Ag(+) ions over that of Na(+), K(+), Ca(2+), Sr(2+), Pb(2+) and Hg(2+) have been observed.     

Evaluation of a carbon paste electrode modified with organofunctionalised SBA-15 nanostructured silica in the simultaneous determination of divalent lead, copper and mercury ions

The performance of a carbon paste electrode (CPE) modified with SBA-15 nanostructured silica organofunctionalised with 2-benzothiazolethiol in the simultaneous determination of Pb(II), Cu(II) and Hg(II) ions in natural water and sugar cane spirit (cacha?a) is described. Pb(II), Cu(II) and Hg(II) were pre-concentrated on the surface of the modified electrode by complexing with 2-benzothiazolethiol and reduced at a negative potential (-0.80 V). Then the reduced products were oxidised by DPASV procedure. The fact that three stripping peaks appeared on the voltammograms at the potentials of -0.48 V (Pb2+), -0.03 V (Cu2+) and +0.36 V (Hg2+) in relation to the SCE, demonstrates the possibility of simultaneous determination of Pb2+, Cu2+ and Hg2+. The best results were obtained under the following optimised conditions: 100 mV pulse amplitude, 3 min accumulation time, 25 mV s(-1) scan rate in phosphate solution pH 3.0. Using such parameters, calibration graphs were linear in the concentration ranges of 3.00-70.0 x 10(-7) mol L(-1) (Pb2+), 8.00-100.0 x 10(-7) mol L(-1) (Cu2+) and 2.00-10.0 x 10(-6) mol L(-1) (Hg2+). Detection limits of 4.0 x 10(-8) mol L(-1) (Pb2+), 2.0 x 10(-7) mol L(-1) (Cu2+) and 4.0 x 10(-7) mol L(-1) (Hg2+) were obtained at the signal noise ratio (SNR) of 3. The results indicate that this electrode is sensitive and effective for simultaneous determination of Pb2+, Cu2+ and Hg2+ in the analysed samples.     

Preparation of an iodide ion-selective electrode by chemical treatment of a silver wire

The preparation and application of an iodide ion-selective electrode, prepared by chemical treatment of a silver wire with Hg(2+) is described. The electrode is suitable for the direct potentiometric measurement of iodide in aqueous solutions with concentrations down to 1 x 10(-6) mol/L. It can be used for potentiometric measurements of various compounds (vitamin C, glutathione).     

Tetrabenzyl pyrophosphate as a new class of neutral carrier responsive to lead ion

Tetrabenzyl pyrophosphate and diphenylphosphinic anhydride, with two phosphoryl groups (PO) as ligating sites, can be used as novel ionophores to make Pb(2+)-selective membrane electrodes. A good result was obtained with tetrabenzyl pyrophosphate, and the electrode based on this ionophore and bis(1-butylpentyl) adipate as a solvent mediator in a poly(vinyl chloride) membrane matrix exhibited a near-Nernstian response to Pb(2+) in the concentration range of 1x10(-5)-1x10(-2) M with a slope of 28.7 mV per concentration decade in a solution containing 0.1 M Mg(NO(3))(2). The limit of detection was 3x10(-6) M. The selectivity of this electrode to other metal cations was comparable to the best case in many Pb(2+)-selective electrodes so far developed. Addition of potassium tetrakis(p-chlorophenyl)borate (40 mol% relative to tetrabenzyl pyrophosphate) caused a drastic change in the response slope (53.3 mV per concentration decade), probably due to the formation of PbA(+), where A stands for anions present in the sample solution, and decreased significantly the electrode selectivity to other metal cations.     

基于Schiff-base结构化合物载体的汞离子选择性电极的制备与表征

高产率合成了一种新的Schiff-base结构化合物,并将其表征为高选择性聚合物膜汞离子选择性电极载体.考察了不同增塑剂及离子交换剂对膜电极响应性能的影响,在最佳膜组分条件下测得该电极对汞离子的线性响应范围为1.0×10-6 ～3.0×10-4 mol/L,响应斜率为(29.3±0.3) mV/dec,检出限为2.6×...     

Continuous flow analysis of iron in zinc electrowinning electrolyte using an iron chalcogenide glass ion-selective electrode Part I. Synthetic media

It is shown that the iron(III) chalcogenide glass membrane ion-selective electrode (ISE) can be calibrated in continuous flow analysis (CFA) using acidified iron(III) nitrate standards, yielding a 60+/-3 mV per decade change in activity of Fe(3+) response in the range 10(-7)-10(-2) M total iron(III). Extended ageing of the iron(III) ISE in 2 M zinc(II) sulphate did not alter the potentiometric response characteristics of the electrode. Furthermore, electrochemical impedance spectroscopy and X-ray photoelectron spectroscopy in the presence and absence of zinc(II) sulphate failed to detect a zinc(II) interference on the iron(III) ISE. CFA/ISE determined activities of Fe(3+) in synthetic zinc electrolyte containing 2x10(-3)-2x10(-1) M total iron(III) yielded results falling within +/-0.2logaFe(3+) unit of the corresponding iron speciation data calculated using the minteqa2 program.     

Aluminium(III)-selective electrode based on a newly synthesized tetradentate Schiff base

A PVC membrane electrode for aluminium ion based on bis(5-phenyl azo salicylaldehyde) 2,3-naphthalene diimine (5PHAZOSALNPHN) as an ion carrier was developed. The electrode exhibits a Nernstian slope of 19.3+/-0.8 mV per decade and a linear range of 5.0x10(-6)-1.0x10(-2) M for Al(NO(3))(3). The limit of detection is 2.5x10(-6) M. It has a fast response time of about 10 s and can be used for at least 10 weeks without observing any deviation. The proposed membrane sensor revealed good selectivity for Al(3+) over a wide variety of other metal ions and could be used in pH range of 2.9-5.0. It was used as an indicator electrode in potentiometric titration of aluminium ion.     

基于双氨基三唑硫醚为中性载体的汞离子选择性电极的研究

研制了基于双氨基三唑硫醚为中性载体的阳离子选择性电极。实验表明,该电极对Hg2 具有良好的电位响应特性,在pH 2.0硝酸盐缓冲液中,电极电位呈近能斯特响应,线性响应范围为4.0 mg/L~20 g/L,斜率为33.4 mV/dec.(25℃),检出限为1.7 mg/L。该电极响应时间短(<10 s),pH范围较宽(1.3~3.3)。将该电极用于实际水样和二元混合溶液中Hg2 的检测,其结果令人满意。     

Voltammetric detection of lead(II) and mercury(II) using a carbon paste electrode modified with thiol self-assembled monolayer on mesoporous silica (SAMMS)

The anodic stripping voltammetry at a carbon paste electrode modified with thiol terminated self-assembled monolayer on mesoporous silica (SH-SAMMS) provides a new sensor for simultaneous detection of lead (Pb2+) and mercury (Hg2+) in aqueous solutions. The overall analysis involved a two-step procedure: an accumulation step at open circuit, followed by medium exchange to a pure electrolyte solution for the stripping analysis. Factors affecting the performance of the SH-SAMMS modified electrodes were investigated, including electrode activation and regeneration, electrode composition, preconcentration time, electrolysis time, and composition of electrolysis and stripping media. The most sensitive and reliable electrode contained 20% SH-SAMMS and 80% carbon paste. The optimal operating conditions were a sequence with a 2 min preconcentration period, then a 60 s electrolysis period of the preconcentrated species in 0.2 M nitric acid, followed by square wave anodic stripping voltammetry from -1.0 V to 0.6 V in 0.2 M nitric acid. The areas of the peak responses were linear with respect to metal ion concentrations in the ranges of 10-1500 ppb Pb2+ and 20-1600 ppb Hg2+. The detection limits for Pb2+ and Hg2+ were 0.5 ppb Pb2+ and 3 ppb Hg2+ after a 20 min preconcentration period.     

Ribonucleic acid as a novel ionophore for potentiometric membrane sensors of some transition metal ions

Ribonucleic acid (RNA) is used as a novel ionophore in plasticized poly(vinyl chloride) matrix membrane sensors for some transition metal ions. Membranes incorporating RNA and doped in Cu(2+), Cd(2+) and Fe(2+) display fast near-Nernstian and stable responses for these ions with cationic slopes of 31.1, 31.3 and 35.5 mV per decade, respectively, over the concentration range 10(-6)-10(-2) M and pH range 4-6.5. The cadmium RNA-based sensor shows no interference by Cu(2+), Fe(2+) Hg(2+) and Ag(+), which are known to interfere significantly with the solid-state CdS/Ag(2)S membrane electrode. The copper RNA-based sensor displays general potentiometric characteristics similar to those based on macrocyclic ionophores and organic ion exchangers and has the advantage of a better selectivity for Cu(2+) over some alkaline earth, divalent and transition metal ions. The iron RNA-based membrane sensor exhibits no interference by Hg(2+) and Zn(2+), which are known to interfere with other previously suggested sensors. The nature and composition of the RNA ionophore and its cadmium complex are examined using electrophoresis, Fourier-transform infrared analysis, elemental analysis and X-ray fluorescence techniques.     

Uranyl-selective PVC membrane electrodes based on some recently synthesized benzo-substituted macrocyclic diamides

Four different recently synthesized macrocyclic diamides were studied to characterize their abilities as uranyl ion carriers in PVC membrane electrodes. The electrodes based on macrocycle 1,18-diaza-3,4;15,16-dibenzo-5,8,11,14,21,24-hexaoxacyclohexaeicosane-2,17-dione resulted in a Nernstian response for UO(2)(2+) ion over wide concentration ranges. The linear concentration range for the polymeric membrane electrode (PME) is 3.0x10(-6)-8.2x10(-3) M with a detection limit of 2.2x10(-6) and that for the coated graphite electrode (CGE) is 5.0x10(-7)-1.5x10(-3) M with a detection limit of 3.5x10(-7) M. The electrodes manifest advantages of low resistance, very fast response and, most importantly, good selectivities relative to a wide variety of other cations.     

A metallic cobalt electrode for the indirect potentiometric determination of calcium and magnesium in natural waters using flow injection analysis

A flow injection analysis of Ca(2+) and Mg(2+) using indirect potentiometric detection in natural waters is proposed, where Ca(2+) or Mg(2+) are injected into a buffer carrier containing phosphate, resulting in the formation of Ca(3)(PO(4))(2) or Mg(3)(PO(4))(2). The consequent reduction in free phosphate in the carrier solution is detected using a metallic cobalt wire electrode. Indirect electrode response was used and the experimental conditions affecting electrode response were optimized. Responses were linear in the concentration range 5x10(-4) to 5x10(-3) M with a detection limit of 1x10(-5) M in 20 mM phosphate buffer at pH 8.0. The relative standard derivation at 1 mM of Ca(2+) and Mg(2+) were 3.9 and 3.7% (n=10), respectively. EGTA and 8-hydroxyquinoline were used as the masking agents for Ca(2+) and Mg(2+), respectively. Concentrations of Ca(2+) and Mg(2+) in natural waters were successfully determined by the proposed method.     

A methionine-based turn-on chemical sensor for selectively monitoring Hg2+ ions in 100% aqueous solution

Dansyl-labeled methionine is synthesized by solid-phase synthesis, and found to be a highly sensitive and selective sensor for Hg(2+). The sensor sensitively detects Hg(2+) ions in aqueous solution by a turn-on response; however, the sensor detects Hg(2+) ions by a turn-off response in organic and mixed aqueous-organic solutions. We investigated the binding stoichiometry, binding constant, and binding mode of the sensor under various solvent conditions. In 100% aqueous solution, 2 : 1 complexation of the sensor with Hg(2+) ions is more favorable than 1 : 1 complexation, whereas the sensor preferentially forms a 1 : 1 complex in 100% CH(3)CN or in 50% CH(3)CN-aqueous solutions. Results reveal that the stoichiometry of the sensor-Hg(2+) complex plays an important role in the type of response to Hg(2+) ions, and that 2 : 1 complexation is required for a turn-on response to Hg(2+) ions in aqueous solution.     

中性载体可咯化合物应用于银离子电位传感器的研究

研制了一种以5,10,15-三(五氟苯基)可咯[H_3(tpfc)]为活性组分物质、以邻硝基苯辛醚o-NPOE为增塑剂、以四苯硼钠为亲脂性大阴离子添加剂的PVC膜电极(4种物质的质量比为3:3:62:32),电极能斯特斜率为54.8 mV/decade、工作浓度范围为5.1×10~(-6)～0.1 mol/L,pH为4.0～8.0,响应时间不超过30 s,该电极对银离子能抵抗来自Hg~(2+)、Pb~(2+)等离子干扰,表现出较高的选择性.这种传感器可用于对实际矿石样品进行检测.     

Cadmium ion-selective electrode based on tetrathia-12-crown-4

A new polyvinylchloride membrane sensor for Cd(2+) ions based on tetrathia-12-crown-4 as an ionophore was prepared. The sensor exhibits a Nernstian response for cadmium ions over a wide concentration range (4.0 x 10(-7) to 1.0 x 10(-1) M) with a slope of 29+/-1 mV decade(-1). The limit of detection is 1.0 x 10(-7) M (0.01 ppm). It has a fast response time of <10 s and can be used for at least 6 weeks without any divergence in potential. The electrode can be used in the pH range from 2.5 to 8.5. The proposed sensor shows fairly good discriminating ability towards Cd(2+) ion in comparison with some alkali, alkaline earth, transition and heavy metal ions. It was successfully applied for the direct determination of Cd(2+) in solution and, as an indicator electrode, in potentiometric titration of cadmium ions.