Comparison of the ion-exchange behaviour of zirconium, thorium, vanadium, uranium, stannic and titanium tungstates

Zirconium, thorium, uranium, vanadium, stannic and titanium tungstates have been prepared and their properties such as ion-exchange capacity, K(d) values of metal ions, chemical composition and stability have been compared. Titanium tungstate was found to be the most stable, and to have negligible capacity for tervalent cations.     

Studies on chromium(III) hydroxide, arsenate, antimonate, molybdate and tungstate

Five water-insoluble compounds of chromium(III) have been synthesized by mixing 0.10M solutions of chromic chloride and the appropriate sodium salts in the volume ratio of 1:2, at pH 6-7. Their ion-exchange characteristics have been compared. The tungstate has the highest chemical stability and the arsenate has the highest ion-exchange capacity. Chromium(III) molybdate columns have been used to separate Pb(2+) from numerous metal ions.     

Comparative study of titanium(IV)-based exchangers in aqueous and mixed solvent systems

The antimonate, arsenate, tungstate, molybdate and selenite of titanium have been synthesized. Their composition and chemical and thermal stability have been determined. Effects of pH and temperature on ion-exchange capacity have been studied. Titanium antimonate was found to be the most stable. The utility of these ion-exchangers for analytical separations was examined by determining the distribution coefficients for 26 metal ions in some aqueous, non-aqueous and mixed solvent systems. Quantitative separations of HgCd, PbCu and PbZn have been achieved on titanium tungstate columns, and LaBa mixtures have been separated on a titanium arsenate column.     

Synthetic Inorganic Ion-Exchangers XV. Thin-Layer Chromatography of Metal Ions on Thorium Tungstate: Quantitative Separation of Hg(II) from Several Other Metal Ions

Abstract

The analytical application of Thorium tungstate as an ion exchanger has been explored by thin-layer chromatographic (TLC) technique. Binder-free thin layers of thorium tungstate have been employed for some important binary and ternary separations. Quantitative separation of Hg(II) from the mixture of several other metal ions has been achieved.     

N-oxides of 4-(5-nonyl)pyridine and trioctylamine as extractants for cerium(IV) and its separation from thorium(IV)

Trace level cerium has been oxidized to the quadrivalent state with potassium dichromate and shown to be preferentially extracted from very dilute mineral acid solutions and also from moderate nitric acid media by 0.1M solutions of 4-(5-nonyl)pyridine oxide and trioctylamine oxide dissolved in xylene. The dependence of extraction on the type of N-oxide, acid concentration and the N-oxide concentration has been investigated. The influence of the concentration of salting-out agents is described. Separation factors for a number of metal ions relative to cerium(IV) are reported for 0.1 M 4-(5-nonyl)pyridine oxide/xylene-0.1M sulphuric acid system. The ratio of the D for Ce(IV) to that of Ce(III) is greater than 10⁵, and the D for Ce(IV) is much greater than that for thorium(IV). Separation of cerium(IV) from thorium has been achieved from 0.1M sulphuric acid solutions using 0.1M 4-(5-nonyl)pyridine oxide/xylene as an extractant.     

Radiation stability of some thermally stable inorganic ion exchangers

The effect of -irradiation on the ion-exchange capacity, distribution coefficient and the efficiency for binary separations of some thermally stable inorganic ion exchangers have been studied. Irradiation upto 100 Mrad, has no effect on these substances, except thorium tungstate which showed changes in ion-exchange capacity, distribution behaviour and in binary separations.     

The extraction of trace amounts of tantalum(V) from different mineral acid solutions by 4-(5-nonyl)pyridine oxide and trioctylamine oxide

Data are presented on the distribution of trace amounts of tantalum (V) between different mineral acid solutions and 0.1M solutions of N-oxides of 4-(5-nonyl)pyridine and trioctylamine. The optimal acidity is 0.01–0.5M, depending on the nature of the acid. Common anions have little effect on extraction. Possible mechanisms of extraction are suggested making use of slope analysis data. Separation factors for a number of metal ions with respect to tantalum are reported for the 0.1M 4-(5-nonyl)pyridine oxide—1M sulphuric acid extraction system. Separation from uranium(VI), thorium(IV) and a number of fission products is suggested. where a part of the work was done.     

Synthetic inorganic ion exchanger. IX. Thorium antimonate. Synthesis,properties and ion exchange separations

Summary Thorium antimonate has been synthesised by mixing 0.1 M Th(NO₃)₄ solution in 0.1 N HNO₃ and 0.05 M potassium pyroantimonate and by mixing 0.1 M Th(NO₃)₄ solution in 0.1 N HNO₃ with 0.1 M SbCl₅ in 4N HCl at controlled pH. The preparative procedure, composition, I.R. spectra, chemical and thermal stability, physico-chemical properties and distribution coefficients of metal ions on thorium antimonate have been determined at pH 5.5–6.5. On the basis of distribution co-efficient values separations of Cu(II) from Mg(II), Ni(II), Mn(II), Mg(II), from Zn(II) and Cd(II) and Zn(II) from Cd(II) have been achieved. Part VIII: Reference [1]     

Separation of metal ions on tin(iv) tungstate and selenite papers

Papers impregnated with the inorganic ion-exchangers tin(IV) tungstate and selenite have been shown to be useful for ion-exchange chromatography of several metal ion mixtures, and suitable solvent systems have been developed and evaluated.     

The determination of the stability constants of uranyl and thorium with aminopolycarboxylic acids

The stability of uranyl and thorium ions with ligands N-(2′-carboxy phenyl) iminodiacetic acid (ADA), iminodiacetic acid (IDA) and [(ethylenedioxy)diethylenedinitrilo]tetraacetic acid (EGRA) have been studied using the potentiometric technique in 0.1M, KNO₃ solution at 25°C. The complexes of thorium (IV) ions with IDA and ADA are shown to be more stable than those for uranyl ions, while EGTA forms more stable complexes with uranyl ion.     

Determination of neodymium by ion-exchanger absorptiometry with the f-f electron transition band

Summary Ion-exchanger absorptiometry, based on the direct measurement of light absorption by neodymium in the cation-exchange phase, has been developed for metal determination. In the presence of ethylenediaminetetraacetic acid (EDTA) about 99% of the neodymium in a 200-ml sample solution (pH 2.2 to 2.5) was concentrated in 0.50 g Muromac 50W-X12 cation exchanger within 15 min. EDTA does not interfere with the sorption of neodymium ions on the resin but suppresses spectrophotometric interference by ferric ions and ion-exchange saturation by ferric and thorium cations. The resin-phase attenuations at 740.5 nm and of the resin background at 620 nm were used for measurements with a 5-mm cell. Neodymium in the range 0.1 – 10 mg could be simply and rapidly determined without interference from other rare earths and the proposed method was used to analyse the rare-earth minerals and alloys.

---

Bestimmung von Neodym durch Ionenaustauscherharz-Absorptiometrie mit Hilfe der f-f-Elektronenübergangsbande

     

Proconcentration of trace elements from high-purity thorium and uranium on Chelex-100 and determination by graphite furnace atomic absorption spectrometry with Zeeman-effect background correction

Preconcentration of trace impurities form large-sized samples of uranium metal and thorium oxide using a small column of Chelex-100 followed by their determination using graphite furnace atomic absorption spectrometry (GFAAS) is reported. A 0.5–10-g amount of the sample (uranium metal or thorium oxide) was dissolved, complexed with ammonium carbonate and subjected to the ion-exchange procedure. The retained analytes were eluted with 2–4 M nitric acid and brought to a small volume for a final dilution to 10-25 ml for their determination using GFAAS. The validity of the separation procedure and recoveries at μg kg⁻¹ levels was checked by standard addition; the recoveries were> 95%.     

Synthesis and characterization of nano-composite ion-exchanger; its adsorption behavior

A novel organic-inorganic nanocomposite cation-exchanger has been synthesized via sol-gel method. It was characterized on the basis of FTIR, XRD, SEM, TEM, AFM and Raman studies. The structural studies reveal semi-crystalline nature of the material with the particle size ranging from 1-5 nm. Physiochemical properties such as ion-exchange capacity, chemical and thermal stability of composite material have also been determined. Bifunctional behavior of the material has been indicated by its pH titrations curves. The nanocomposite material exhibits improved thermal stability, higher ion-exchange capacity and better selectivity for toxic heavy metals. The ion-exchange material shows an ion-exchange capacity of 1.8 meq g(-1) for Na(+) ions. Sorption behavior of metal ions on the material was studied in different solvents. The cation exchanger was found to be selective for Pb(II), Hg(II) and Zr(IV) ions. The limit of detection (LOD) and the limit of quantification (LOQ) for Pb(II) ion was found to be 0.85 and 2.85 μg L(-1). Analytically important separations of heavy metal ions in synthetic mixtures as well as industrial effluents and natural water were achieved with the exchanger. The practical utility of polyanilineZr(IV)sulphosalicylate cation exchanger has been established for the analysis and recovery of heavy metal ions in environmental samples.     

Anion-exchange system in magnesium nitrate media. Application to chemical analysis of manganese nodules for thorium and uranium

Summary The adsorption behaviour of 26 metal ions on the strongly basic anion-exchange resin Bio Rad AG-1, X-8 has been examined in magnesium nitrate media. The salt concentration range from 0.50-3.0 M is covered in the presence of 0.1 M free nitric acid. The distribution coefficients of bismuth(III), thorium(IV) and uranium(VI) rise to the order of 1,000 in media of 0.1 M nitric acid with high salt strength, while most other elements are only weakly adsorbed as is also the case in pure nitric acid media. The system allows thorium(IV) and uranium(VI) to be concentrated simultaneously from 2.5 M nitrate media, so that it can be applied successfully to the determination of thorium and uranium in manganese nodules with consecutive Chromatographic elution from a single small resin column. The subsequent determination is carried out spectrophotometrically with Arsenazo III.

---

Anionenaustausch in Magnesiumnitratlösung. Anwendung zur Thorium- und Uranbestimmung in Manganknollen

Zusammenfassung Das Adsorptionsverhalten von 26 Metallionen wurde aus Magnesiumnitratlösung an dem stark basischen Anionenaustauscher Bio-Rad AG-1, X-8, untersucht. Die Salzkonzentration reichte von 0,5-3,0 M bei Gegenwart von 0,1 M freier Salpetersäure. Die Verteilungskoeffizienten von Bismut(III), Thorium(IV) und Uran(VI) reichen bei hoher Salzkonzentration bis zur Größenordnung von 1000, wogegen die meisten anderen Elemente nur schwach adsorbiert werden, was auch in reiner salpetersaurer Lösung der Fall ist. Dadurch können Th(IV) und U(VI) gleichzeitig aus 2,5 M Nitratlösung angereichert und mit gutem Erfolg in Manganknollen bestimmt werden, wobei nur eine einzige Elution von einer kleinen Harzsäule erforderlich ist. Die anschließende Bestimmung erfolgt spektralphotometrisch mit Arsenazo III.

     

Amperometric complex-formation titrations with a dropping bismuth amalgam electrode in halide medium

The use of the dropping bismuth amalgam electrode has been investigated for the selective determination of metal ions in the presence of large concentrations of halides by means of amperometric complex-formation titrations, using normal pulse polarography. Concentrations of metal ions down to 3 x 10(-7)M have been determined with adequate accuracy in the presence of about 0.1M chloride or 0.01M bromide. Calculated and experimental current-voltage curves have been compared and found to be in reasonable agreement.     

Selective extraction, preconcentration and transport studies of thorium(IV) using octa-functionalized calix[4]resorcinarene-hydroxamic acid.

A new calix[4]resorcinarene bearing eight hydroxamic acid groups (C4RAHA) has been synthesized and characterized by FT-IR, 1H-NMR and elemental analysis. Its analytical properties were investigated, and showed high affinity and selectivity toward thorium(IV) in the presence of large quantities of associated metal ions. Thorium(IV) was extracted from an ethyl acetate solution of C4RAHA at pH 4.5. The lambdamax and molar absorptivity (epsilon) for thorium(IV) were 341 nm and 7120 l mol(-1) cm(-1). The complexation of thorium(IV) with C4RAHA has a 4:1 metal:ligand stoichiometry, which is relatively rare. The extracts were directly aspirated in the plasma for ICP-AES measurements for thorium(IV) in the presence of a diversified matrix. The system obeyed Beer's law over the range 0.1 - 6.5 microg ml(-1) of thorium(IV) with a Sandell sensitivity of 0.0325 microg cm(-2). The preconcentration factor and overall stability constant evaluated at 25 degrees C for thorium(IV) were 133 and 15.86, respectively. The complexation was characterized by a favorable enthalpy change. A liquid-membrane transport study of thorium(IV) was carried out from the source to the receiving phase under controlled conditions, and a mechanism of transport proposed. To check the validity of the proposed method, thorium(IV) was determined in monazite sand, rare earth sand and water samples.     

Successive uranium and thorium adsorption from Egyptian monazite by solvent impregnated foam

The present work deals with uranium and thorium recovery from the Egyptian monazite sulfate leach liquor using the extraction chromatography technique (solvent impregnated material), where tributylamine (TBA) and di-n-octylamine (DOA) solvents were impregnated onto foam uranium and thorium separate recovery. The calculated theoretical capacities of the latter solvents were about 1.4 gU/g foam and 1.6 gTh/g foam, respectively. The attained uranium and thorium adsorption efficiencies (using ion-exchange columnar technique) were about 75 and 70% of its theoretical capacities, respectively. Using 1 M NaCl–0.1 M H₂SO₄ and 2 M H₂SO₄ as eluent solutions for uranium and thorium from the loaded solvents impregnated foam gave 95.8 and 98.7% elution efficiencies, respectively.     

Separation and determination of rare earth elements by Dowex 2-X8 resin using sodium trimetaphosphate as elution agent

The distribution coefficients of rare earth elements and thorium with Dowex 2-X8, 200-400 mesh, a strongly basic anion-exchange resin, have been determined regarding four different concentrations of sodium trimetaphosphate (3 x 10(-3), 5 x 10(-3), 7 x 10(-3) and 0.01 M). The separation of the rare earths and thorium obtained from an Australian monazite has been investigated by anion-exchange chromatography with sodium trimetaphosphate concentration gradient on a Dowex 2-X8 ion-exchange columns. The order of elution of the elements was the reverse of the order of elution of the same elements on Dowex 1 resin. The elution was investigated using 5 mg and 250 mg samples. In the separation of 5 mg samples, all elements were separated in 29 min. It has been seen that the elution peaks are narrow, tailing effects are very small, Dy and Y are well separated. Qualitative and quantitative determinations were realized by spectrofluorometry.     

Titanium(IV) tungstosilicate and titanium(IV) tungstophosphate: two new inorganic ion exchangers

Crystalline phases of Ti(IV) tungstosilicate and Ti(IV) tungstophosphate have been synthesised. The ion-exchange capacities of Ti(IV) tungstosilicate and Ti(IV) tungstophosphate have been reported as 0.44 and 0.80 mequiv./g, respectively. Both materials show monofunctional ion-exchange characteristic and are stable in 0.1 M solutions of HNO3, HCl, H2SO4 and acetone and benzene. Ti(IV) tungstosilicate is found to be more stable thermally than Ti(IV) tungstophosphate (loss in ion-exchange capacity was found as 58 and 80%, respectively for samples heated at 200 degrees C). The Kd values for heavy metals such as Pb, Hg, Cd, Sb, Co, Zn, Ni, Fe, Cr etc. have been reported in demineralised water and two surfactant media by batch processes. Cr3+, Fe3+ and Sn4+ are totally adsorbed on both the materials in demineralised water while a decrease in Kd value with increase in concentration of two surfactants is reported. On the basis of Kd values for metal ions, thirteen binary separations and five ternary separations on Ti(IV) tungstosilicate and thirteen different binary separations and four different ternary separations on Ti(IV) tungstophosphate have been achieved. Separation of methylamine from ethylamine has been done by GC on a column packed with Ti(IV) tungstophosphate.     

Studies on extraction of thorium by the N-oxides of 5-(4-pyridyl)nonane and trioctylamine from different mineral acid solutions and its separation from rare earth elements and yttrium

The N-oxides of 5-(4-pyridyl)nonane and trioctylamine have been evaluated for use in the extraction of thorium from different mineral acid solutions. The influence of the concentration of the solvents and salting-out agents has been investigated. The possible mechanism of extraction is discussed in the light of the results of extraction isotherms, loading-ratio data and log-log plots of reagent concentration vs. distribution ratio. Separation factors for a number of metal ions are reported and a method for the separation of thorium from rare earth elements and yttrium is also suggested.