Titration of cyanide and hexacyanoferrate(II) with silver nitrate-I Calculation of titration curves for potentiometric and conductometric titration

Stepwise potentiometric titration of cyanide and hexacyanoferrate(II) with silver nitrate is possible in the absence of potassium ions. At an initial concentration below 5.00 x 10(-4)M, cyanide can be titrated with silver nitrate (Ag:CN = 1:2) and the end-point indicated by precipitation of silver hexacyanoferrate(II); hexacyanoferrate(II) can be titrated with silver nitrate (Ag: Fe(CN)(6) = 4:1) and the end-point indicated by precipitation of silver dicyanoargentate. The hexacyanoferrate(II) reacts with silver to form two poorly soluble salts, Ag(4)Fe(CN)(6), KAg(3)Fe(CN)(6). The formation of these salts has been confirmed by conductometric titration of hexacyanoferrate(II) with silver nitrate in solutions containing varying concentrations of potassium nitrate.     

Silver(I) coordination chemistry of 2,6-diarylpyrazines. Pi-stacking,anion coordination,and steric control

The silver(I) coordination chemistry of 2,6-diarylpyrazines is reported. Discrete coordination complexes and two-dimensional coordination networks were characterized. The substitution pattern on the pendant aryl groups controlled the type of coordination chemistry involved. Thus, o-methyl-substituted aryl groups held the aryl groups orthogonal to the central pyrazine ring, opening the "hindered" nitrogen atoms to complexation, and polymeric networks were characterized. In the absence of the o-methyl groups, discrete coordination complexes were characterized. Thus, a dimeric 2:1 ligand-silver(I) complex was isolated and characterized on reaction of 2,6-bis(3',5'-dimethylphenyl)pyrazine with silver(I) trifluoroacetate in acetonitrile solvent, while a 2:2 complex was isolated from dichloromethane solvent. Two trifluoroacetate ligands bridge two silver cations in both complexes. Reaction of the same pyrazine ligand with silver(I) tetrafluoroborate yielded a discrete 2:1 complex. A 2:1 complex was isolated on reaction of 2,6-diphenylpyrazine with silver(I) nitrate. These complexes were interlinked by weakly coordinating nitrate anions to form interwoven one-dimensional ribbons. Two-dimensional networks were obtained on reaction of silver(I) trifluoroacetate with either 2,6-bis(2',6'-dimethylphenyl)pyrazine or 2-(2',6'-dimethylphenyl)-6-(3',5'-dimethylphenyl)pyrazine. The networks comprised pyrazine-silver(I) strands cross-linked with complex bridged silver(I) trifluoroacetates.     

Synthesis and Antimicrobial Activity of Methyl (2 Z )-4-Aryl-2-{4-[(4,6-dimethylpyrimidin-2-yl)sulfamoyl]phenylamino}-4-oxobut-2-enoates and Their Silver Salts

A series of new methyl (2Z)-4-aryl-2-{4-[(4,6-dimethylpyrimidin-2-yl)-sulfamoyl]phenylamino}-4-oxobut-2-enoates was synthesized by the reaction of methyl esters of aroylpyruvic acids with 2-(4-aminobenzenesulfamido)-4,6-dimethylpyrimidine in a mixture of acetic acid–ethanol (1 : 1). The obtained 4-oxobut-2-enoates reacted with silver nitrate in ethanol–DMF (2 : 1) to form their silver salts. The antimicrobial activity of the compounds was studied.     

Sensitive silver staining of protein in sodium dodecyl sulfate-polyacrylamide gels using an azo dye, calconcarboxylic acid, as a silver-ion sensitizer

A highly sensitive silver staining method for detecting proteins in sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) was developed. It is based on the silver nitrate staining method but also employs an azo dye, calconcarboxylic acid (NN), as a silver-ion sensitizer. It increases silver binding on protein bands or spots by the formation of a silver-dye complex and also increases the reducing power of silver ions to metallic silver by NN itself with formaldehyde. After a 2 h gel fixing step, the protocol including sensitization, silver-ion impregnation, and reduction steps can be completed in 1 h. The sensitivity is superior to that of silver stain with glutardialdehyde as a silver-ion sensitizer. The detection limit of NN-silver stain is 0.05-0.2 ng protein. Considering the high sensitivity without using glutardialdehyde, the NN-silver stain would be useful for routine silver staining of proteins.     

Well-defined N-heterocyclic carbene silver halides of 1-cyclohexyl-3-arylmethylimidazolylidenes: synthesis, structure and catalysis in A3-reaction of aldehydes, amines and alkynes

Structurally well-defined N-heterocyclic carbene silver chlorides and bromides supported by 1-cyclohexyl-3-benzylimidazolylidene (CyBn-NHC) or 1-cyclohexyl-3-naphthalen-2-ylmethylimidazolylidene (CyNaph-NHC) were synthesized by reaction of the corresponding imidazolium halides with silver(I) oxide while cationic bis(CyBn-NHC) silver nitrate was isolated under similar conditions using imidazolium iodide in the presence of sodium nitrate. Single-crystal X-ray diffraction revealed a dimeric structure through a nonpolar weak-hydrogen-bond supported Ag-Ag bond for 1-cyclohexyl-3-benzylimidazolylidene silver halides [(CyBn-NHC)AgX](2) (X = Cl, 1; Br, 2) but a monomeric structure for N-heterocyclic carbene silver halides with the more sterically demanding 1-cyclohexyl-3-naphthalen-2-ylmethylimidazolylidene ligand (CyNaph-NHC)AgX (X = Cl, 4; Br, 5). Cationic biscarbene silver nitrate [(CyBn-NHC)(2)Ag](+)NO(3)(-)3 assumed a cis orientation with respect to the two carbene ligands. The monomeric complexes (CyNaph-NHC)AgX 4 and 5 showed higher catalytic activity than the dimeric [(CyBn-NHC)AgX](2)1 and 2 as well as the cationic biscarbene silver nitrate 3 in the model three component reaction of 3-phenylpropionaldehyde, phenylacetylene and piperidine with chloride 4 performing best and giving product in almost quantitative yield within 2 h at 100 °C. An explanation for the structure-activity relationship in N-heterocyclic carbene silver halide catalyzed three component reaction is given based on a slightly modified mechanism from the one in literature.     

Potentiometric studies on organic compounds containing sulphur with a sulphide ion-selective membrane electrode

Phenylthiourea and N,N-diphenylthiourea can be determined in the concentration range 10¹–10^?3M by potentiometric titration with silver nitrate solution with a sulphide ion-selective membrane electrode. The influence of the alkali and acid concentration on the course of the reactions with the silver nitrate titrant was studied. When phenylthiourea is titrated in the presence of 0.1 M sodium hydroxide, silver sulphide is precipitated, and the phenylcyanamide formed simultaneously reacts further with silver nitrate to form a silver phenylcyanamide precipitate. When N,N-diphenylthiourea is titrated under similar conditions, silver sulphide is again formed, but no cyanamide-type compound can be formed owing to the presence of the second phenyl group. In 1 M sodium hydroxide both compounds studied react with two equivalents of silver to give silver sulphide and phenylurea or diphenylurea, respectively. In the presence of nitric acid both compounds react similarly with silver nitrate. Two molecules of the compounds react with one molecule of silver nitrate to give a white precipitate.     

Adsorption of Silver Nitrate by Cotton Fabrics Containing Polyethylene Sulfide

The adsorption of silver nitrate from aqueous solution by polyethylene sulfide-containing cotton fabrics was investigated. The adsorption could be described by a Freundlich-type isotherm with n= 1. δH^os was calculated from adsorption isotherms and from the equilibrium constant of complex formation and similar results of-5.6 and -5.4 kcal/mole were obtained, respectively. At low silver nitrate concentrations most of the silver nitrate present in solution could be adsorbed. It was found that adsorption by polyethylene sulfide in the fabric was much higher than that of homo-polyethylene sulfide.     

Annealing Behavior of Silica Gel Powders Modified with Silver Crystalline Aggregates

The annealing behaviour of silica powders added with silver, prepared by the sol-gel method, was studied using X-ray diffraction. Partial crystallization of amorphous SiO₂ samples as low as 600°C has been observed. For that, silver needed to be added to the precursor solution in such a way that it formed aggregates. Silica xerogel samples were prepared using a molar ratio ethanol/H₂O/TEOS of 4:11.6:1 and loaded with silver in three different ways: in the form of silver nitrate, silver chloride, or chemically synthesised silver fine particles. The microstructure of the silica xerogel powders was studied as a function of annealing temperature. Attention was paid to the evolution of the glass matrix as well as the silver aggregates in the SiO₂ matrix. Partial crystallization of the glass matrix was achieved at temperatures much lower than those specified by the phase diagram, independently of preparation method of the silver aggregates.     

基于三维纳米银修饰电极的硝酸根微型传感芯片研究

研制一种基于金叉指微电极阵列(IDA)的电流型硝酸根离子(NO-3)微传感电极芯片.基于微机电系统(Micro-Electro-Mechanical Systems,MEMS)工艺制备金IDA微电极,通过电化学沉积技术在IDA微电极表面修饰三维枝状结构纳米银敏感膜,利用敏感膜对硝酸根离子良好的电催化还原性能,采用脉冲方波伏安(SWV)电化学测量方法,实现对硝酸根离子在25～1000μmol/L浓度范围内的快速检测,灵敏度达9.5 nA/(μmol/L),线性度为99.98%,检测下限为10μmol/L.考察水体中常见的NO-2,F-,3PO 4-,SO 42-,2CO3-,NH+4,Na+和K+等离子对该传感芯片的干扰性能,传感芯片表现出较好的抗干扰性能.制备的三维枝状结构纳米银修饰IDA微电极可实现水环境(pH 5.0～9.0)中NO-3的电化学检测,对应用于自然水环境中硝酸根离子的现场检测具有积极意义.     

STUDY ON THE RECOVERY OF AgNO3 BY IONEXCEHNGE METHOD FROM THE WASTERS

This paper introduces an improved new method which is used to recover silver as silver nitrate by ion exchange from the wasters.In this method,we can recover silver nitrate,only by using a kind of ion exchange resin and two ion exchange processes.It can replace the original recovery method in which two kinds of ion exchange resins and three ion exchange processes are needed.The result is satisfied     

Partial phase diagrams for the water—cadmium nitrate, water—silver nitrate and water—cadmium nitrate—silver nitrate systems

Sub-ambient differential scanning calorimetry has been used to determine partial binary phase diagrams for the water—silver nitrate and water—cadmium nitrate systems. Both systems are shown to be eutectic with eutectic temperatures of 263 ± 0.5 K and 256.5 ± 0.5 K for the water—silver nitrate and water—cadmium nitrate systems, respectively. The eutectic compositions are at approximately 40.5 wt.% nitrate for each system. The freezing of ternary solutions containing a fixed silver nitrate/cadmium nitrate ratio but increasing concentrations of total nitrates are explained in terms of a partial ternary system containing two binary eutectic systems and a ternary eutectic reaction. The ternary eutectic temperature is shown to be 254 ± 0.5 K.     

Chronocoulometric determination of nitrate on silver electrode and sodium hydroxide electrolyte

An electrochemical system that consists of a silver electrode in 0.01 M sodium hydroxide electrolyte was investigated in an effort to develop a sensitive in situ analytical method for nitrate. Cyclic voltammetry demonstrated that the proposed system has a high normalized sensitivity (2.47 A s(1/2) V(-1/2) M(-1) cm(-2)), compared to more complex electroanalytical schemes. Double-potential-step chronocoulometry was used to maximize the signal-to-noise ratio (SNR), and minimize interference from dissolved oxygen in the electrolyte. The integration period for double-potential-step chronocoulometry was determined by optimizing the extended Cottrell equation. The integrated current is proportional to nitrate up to 10 mM and the average detection limit is approximately 1.7 microM. Dissolved oxygen does not degrade performance. To examine the potential interference of other ions when analyzing nitrate, we measured the electrode response to 1000 microM each of NO(2-), Cl(-), PO(4)(3-), SO(4)(2-), F(-), CO(3)(2-), BO(2-), K(+), Ca(2+), and Sr(2+) with and without 1000 microM nitrate. Interference is negligible for most of the ions when nitrate is absent (i.e. <1% of the response to equimolar nitrate). However, interference is substantial (>20% increase or decrease in the electrode response to nitrate) for PO(4)(3-), Ca(2+), and Sr(2+) when equimolar nitrate is present.     

Histochemical localization of high-sulfur keratins with silver nitrate

Colloid and Polymer Science - The treatment of merino wool with ammoniacal silver nitrate results in a selective staining of high-sulfur proteins. The method has been applied to unmodified and...     

Silver and lanthanum as effective modifiers in trace determination of cadmium in nickel-base alloys by electrothermal atomic absorption spectrometry

Trace cadmium in nickel-base superalloys was determined by a stabilized temperature platform furnace using atomic absorption spectrometry with a deuterium arc background correction system. The volatility of cadmium limits the pyrolysis temperature. This prevents the removal of the interfering alloy matrix at the thermal pretreatment step. Hence, an enormously high background signal has been observed. Chemical modifiers including ammonium citrate, 1-(2-pyridylazo)-naphthol, 4-(2pyridylazo)resorcinol, 2-(5-bromo-2-pyridylazo)-5-(diethylamino)-phenol, Triton-X 100, EDTA, potassium nitrate, palladium nitrate, magnesium nitrate, aluminum chloride, ammonium dihydrogen phosphate, lanthanum oxide, lanthanum chloride and silver nitrate have been studied. Matrix interferences were effectively reduced by silver and lanthanum. The 100–300°C increase in the pyrolysis temperature effectively reduced the non-specific absorption from the alloy matrix. Interferences from foreign ions were also investigated. The merit of the proposed method was increased by the excellent agreement between the certified and the experimental values of Cd in the standard reference material, IN100, and the recovery obtained (100–104%). The precision of six successive replicate measurements was 4.9% with Ag modifier and 2.5% with La modifier, respectively. The results of analysing Tracealloy B were also satisfactory.     

二氧化硒催化过氧化氢氧化萘丙醛制萘丙酸的研究

萘丙酸((±)-2-(6-甲氧基-2-萘基)-丙酸)的右旋体有解热镇痛特效,国内生产中由萘丙醛氧化成酸系采用多伦试剂,耗费大量硝酸银。我们采用过氧化氢作氧化剂,结果表明,制得的产品纯度高,而且成本低。     

Immobilization of chymotrypsin on silver nanoparticles

Russian Chemical Bulletin - The method of immobilization of chymotrypsin based on the reduction reaction of silver nitrate with sodium borohydride in an aqueous medium in the presence of the enzyme...     

Comparison of different chemical modifiers for the direct determination of arsenic in sea water by electrothermal atomic absorption spectrometry

A comparative study of different chemical modifiers for the direct determination of arsenic in real and in synthetic sea water samples of high (72.8 per thousand ) and low (34.2 per thousand ) salinity was carried out. The use of lanthanum chloride and magnesium nitrate (LOD=3.0 microg l(-1)) offers good recoveries for low salinities, while for high salinities an enhancement higher than 200% was obtained, rendering this method unsuitable for sea water samples. The use of silver nitrate (LOD=2.0 microg l(-1)) produces unfavourable analytical recoveries, around 150 and 300% for synthetic sea water of low and high salinity. Zirconium oxychloride (LOD=1.8 microg l(-1)) and palladium nitrate alone or combined with magnesium nitrate and reducing agents (LOD=1.1-1.3 microg l(-1)) produce analytical recoveries close to 100% for all arsenic concentration tried over all salinities; thus, a single calibration curve using aqueous standard solutions may be applied to the analysis of sea water samples over all salinities. Finally, the addition of reducing agents and magnesium nitrate to palladium does not improve the sensitivity.     

Spectrophotometric determination of silver with 2-(3,5-dibromo-2-pyridylazo)-5-diethyl-aminophenol in the presence of anionic surfactant

A sensitive and selective spectrophotometric method for silver has been established by reacting silver(I) with 2-(3,5-dibromo-2-pyridylazo)-5-diethylaminophenol (3,5-diBr-PADAP) in the presence of an anionic surfactant, sodium lauryl sulphate. The molar absorptivity is 7.7 x 10(4) l.mole(-1).cm(-1) at 570nm. The molar ratio of silver to 3,5-diBr-PADAP is 1:2. Beer's law is obeyed from 0.1 to 1 ppm of silver. With EDTA as masking agent, common ions do not interfere. The method has been applied to the determination of silver in waste water.     

New spot-test for silver(I) based on double iodide formation with bismuth(III)

The formation of an intense brownish-maroon or maroon-red product by the interaction of silver(I) and bismuth(III) solution in the presence of iodide forms the basis of a new and specific spot-test procedure for silver. The test is conducted on a spot plate with 2 or 3 drops of 2% potassium iodide solution, 1 drop of 1% bismuth(III) nitrate solution, and 1 drop of test solution. Limit of detection is 0.01 mug; limit of dilution is 1:5 x 10(6). Most cations and anions do not interfere. Only Tl(I), Cs, S(2)O(2-)(3), EDTA, pyridine, excess of thiourea, oxidizing ions (NO(-)(2), IO(-)(3), IO(-)(4), MnO(-)(4), BrO(-)(3), and S(2)O(2-)(8)) and ions such as Cl(-), Br(-), I(-), SCN(-), and N(-)(3) which cause precipitation of silver, interfere. The product formed is most probably Ag(2)BiI(5).     

Determination of traces of silver in human scalp hair slurries by electrothermal atomic absorption spectrometry

A simple and rapid method for the determination of traces of silver in human hair by slurry sampling and electrothermal atomic absorption spectrometry was optimized. Hair pulverization and the particle size reduction were achieved using a vibrational zirconia mill ball for 20 min. Palladium nitrate, magnesium nitrate and palladium-magnesium nitrate were investigated as chemical modifiers to thermally stabilize silver. Glycerol was used as wetting agent to stabilize the hair slurries. A limit of detection of 21.6 g kg^–1 was obtained for the use of palladium nitrate as best chemical modifier. The repeatibility of the overall procedure (slurry preparation and atomic absorption spectrometric determination) corresponding to eleven measurements was 14.3%. Matrix effect was significant and so, the standard addition method was used to determine silver in hair samples from healthy people. The levels found varied between 0.10 and 1.62 mg kg^–1.