Synthesis of novel palladium N‐heterocyclic‐carbene complexes as catalysts for Heck and Suzuki cross‐coupling reactions

Novel palladium‐1,3‐dialkylperhydrobenzimidazolin‐2‐ylidene (2a–c) and palladium‐1,3‐dialkylimidazolin‐2‐ylidene complexes (4a,b) have been prepared and characterized by C, H, N analysis, ¹H‐NMR and ¹³C‐NMR. Styrene or phenylboronic acid reacts with aryl halide derivatives in the presence of catalytic amounts of the new palladium‐carbene complexes, PdCl₂(1,3‐dialkylperhydrobenzimidazolin‐2‐ylidene) or PdCl₂(1,3‐dialkylimidazolin‐2‐ylidene) to give the corresponding C? C coupling products in good yields. Copyright © 2006 John Wiley & Sons, Ltd.     

Highly specific spectrophotometric method for palladium(II) determination with 3-(5'-tetrazolylazo)-2,6-Diaminotoluene in the presence of chlorides. Kinetic and equilibrium study of reactions

3-(5'-tetrazolylazo)-2,6-Diaminotoluene (TEADAT, H(3)L(2+)) forms stable 1:1 and 1:2 (metal:ligand) pink-red complexes (lambda(max) 506 and 536 nm) with palladium(II). The apparent molar absorptivity of 1:2 complex is 5.2 x 10(4) 1.mol(-1). cm(-1) at 536 nm. Equilibrium constants beta*(nl) for reactions PdCl(2-)(4) + nH(3)L(2+) right harpoon over left harpoonright harpoon over left harpoon PdCl(4-n) (H(2)L)(2n-2)(n) + n Cl(-) + n H(+) were determined: logbeta*(1) = 4.09 +/- 0.05, logbeta*(2) = 8.40 +/- 0.02, corresponding stability conditional constants of PdCl(3)(H(2)L) and PdCl(2)(H(2)L)(2+)(2) were log beta(1) = 19.03, log beta(2) = 26.74. The formation of complexes was rather slow but could be speeded up considerably by the catalytic effect of trace amounts of thiocyanate. Constant absorbance values were thus reached in 2-5 min. A rapid, sensitive and highly specific method for the determination of palladium(II) at pH 1.42 in 0.25M NACl has been worked out with a detection limit of 0.54 mug. Interference of precious and common metal ions have been studied and the method has been applied for the determination of palladium in Pd asbestos, oakay alloys and various catalysts and for the determination of palladium in precious metals.     

Heteropolytopic arsanylarylthiolato ligands: cis-trans isomerism of nickel(II), palladium(II), and platinum(II) complexes of 1-AsPh2-2-SHC6H4

Heteropolytopic arsanylthiolato ligands 1-AsPh(2)-2-SHC(6)H(4) (AsSH), PhAs(2-SHC(6)H(4))(2) (AsS(2)H(2)), and As(2-SHC(6)H(4))(3) (AsS(3)H(3)) have been prepared by lithiation-electrophilic substitution procedures. The 2:1 reaction of AsSH with NiCl(2)·6H(2)O, Na(2)[PdCl(4)], and [PtI(2)(cod)] (cod = 1,5-cyclooctadiene) in the presence of NEt(3) afforded the square-planar complexes trans-[Ni{(AsS)-κ(2)S,As}(2)] (1), cis-[Pd{(AsS)-κ(2)S,As}(2)] (2), trans-[Pd{(AsS)-κ(2)S,As}(2)] (3), and cis-[Pt{(AsS)-κ(2)S,As}(2)] (4). In the cases of nickel and platinum, only one isomer was isolated. With palladium, initially the cis isomer 2 is formed and undergoes slow isomerization to the trans isomer 3 in solution. Small amounts of the trinuclear complex [{PtI(1-AsPh(2)-μ-2-S-C(6)H(4)-κ(2)S,As)}(3)] (5) are also formed besides the mononuclear platinum bis-chelate complex 4. Density functional theory calculations support a dissociative mechanism for the isomerization of the palladium(II) complexes.     

含p-ClC6H4-HIEAI配体的两个Pd(Ⅱ)配合物的合成、表征和PdCl(p-ClC6H4-IEAI)(p-ClC6H4NH2)的晶体结构

邻二肟配合物和邻肟-亚胺配合物已作为维生素B_(12)的模拟物加以研究。二齿异亚硝基-β-酮胺配体,由于其异亚硝基(肟基)配位功能而引起人们的兴趣。在已知的这类配体的金属配合物中,肟     

Mono- and dinuclear five-coordinate cyclometalated palladium(II) compounds

Reaction of cyclometalated halide-bridged Pd(II) complexes 1-4 with the tertiary triphosphine ligand (Ph2PCH2CH2)2PPh (triphos) yielded complexes [((Ph2PCH2CH2)2PPh-P,P,P)Pd(N(Cy)=(H)C)C6H2(C(H)=N(Cy))Pd((Ph2PCH2CH2)2PPh-P,P,P)][ClO4]2 5, [Pd(C6H4-N=NC6H5)((Ph2PCH2CH2)2PPh-P,P,P)][ClO4] 6, and [Pd(R-C6H3C(H)=NCy)((Ph2PCH2CH2)2PPh-P,P,P)][ClO4] (7; R = 4-CHO, 8; 3-CHO). Spectroscopic and analytic data suggest five-coordination on the palladium atom, which, for complexes 5, 6, and 7, was confirmed by X-ray crystallography. The geometry around palladium may be view as a distorted trigonal bipyramid, with the palladium, nitrogen, and terminal phosphorus atoms in the equatorial plane. Compound 5 is the first doubly cyclometalated palladium(II) compound with two pentacoordinated metal centers. The structure of 6 comprises two discrete cations with slightly different geometries, showing the importance of crystal packing forces in order to determine the coordination arrangement.     

Preparation and characterization of 4-dimethylaminopyridine-stabilized palladium nanoparticles

4-Dimethylaminopyridine (DMAP)-stabilized palladium nanoparticles with a mean diameter of 3.4 +/- 0.5 nm are prepared from the aqueous phase reduction of Na2PdCl4 using NaBH4 in the presence of DMAP. TEM and UV-vis spectroscopy characterization of the nanoparticle dispersion shows no obvious change in the nanoparticles several months after preparation. 1H NMR spectroscopy of the nanoparticles shows that the nanoparticle dispersion also contains a boron/DMAP complex and two palladium/DMAP complexes. One of the palladium complexes crystallizes out of the dispersion and is identified as Pd(DMAP)4(OH)2 by X-ray crystallography. Following extensive analysis, it is believed that the palladium/DMAP complexes are formed following the oxidation of the palladium nanoparticles. The prepared nanoparticle dispersion promotes selective hydrogen/deuterium (H/D) exchange on the carbon atoms alpha to the endocyclic nitrogen atom on the DMAP-stabilizing ligands through reaction with D2O. This activity is attributed to the presence of the nanoparticles rather than to the presence of the oxidized palladium/DMAP complexes.     

Reaction of Palladium Bis(acetylacetonate) with Diphenylphosphine: Spectral Studies

Interaction of palladium bis(acetylacetonate) with diphenylphosphine is studied by NMR, IR, and UV methods. Reaction between reagents taken in equimolar amounts gives binuclear and trinuclear palladium complexes with bridging diphenylphosphide and the chelate acetylacetonate [Pd(Acac)PPh₂]₂ and [Pd₃(Acac)₂(PPh₂)₄] ligands. With excess PPh₂H, the trinuclear palladium complex, whose composition is supposed to be [Pd₃(PPh₂)₄(PPh₂–PPh₂) · C₆H₆], is isolated and characterized on the basis of the spectral data.     

Studies on fluoroalkylation and fluoroalkoxylation: 8. Palladium(0)-catalyzed addition reaction of fluoroalkyl iodides with alkynes

Fluoroalkyl iodide R_fI [R_F=(CF₂)_nCl, n=2, 4, 6; CF₃(CF₂)_n, n=1, 3; H(CF₂)₄] reacted with alkyne (CH≡CC₄H₉; CH≡CSiMe₃; CH≡CC₆H₅) in the presence of catalytic amounts of tetrakis (triphenylphosphine) palladium (0) to give a mixture of E and Z-fluoroalkylated adduct. The reaction could not be catalyzed by dichloro-bis(triphenylphosphine)palladium (II) and fluoroalkyl complex of palladium (II). 2-Nitro-2-nitrosopropane partly suppressed the reaction. It is believed that the reaction proceeds through a free radical intermediate rather than fluoroalkyl complex of palladium (II).     

Direct synthesis of palladium porphyrins from acyldipyrromethanes

[reaction: see text] Palladium porphyrins are valuable photosensitizers and luminescent agents in biology and materials chemistry. New methodology is described wherein a 1-acyldipyrromethane is converted into the palladium chelate of a trans-A(2)B(2) porphyrin via a one-flask reaction. The reaction entails self-condensation of the 1-acyldipyrromethane in refluxing ethanol containing KOH (5-10 mol equiv) and Pd(CH(3)CN)(2)Cl(2) (0.6 mol equiv) exposed to air. This direct route to palladium porphyrins is more expedient than the four steps of the traditional synthesis: (1) reduction of the 1-acyldipyrromethane; (2) acid-catalyzed condensation; (3) oxidation of the porphyrinogen intermediate; and (4) metal insertion. The new synthesis requires neither acid nor DDQ and formally entails only a 2e(-) + 2H(+) oxidation overall versus the traditional multistep synthesis which requires a 2e(-) + 2H(+) reduction per each 1-acyldipyrromethane (4e(-) + 4H(+) overall) followed by a 6e(-) + 6H(+) oxidation. The analogous reaction of a 1,9-diacyldipyrromethane and a dipyrromethane also gives the palladium porphyrin. Seven palladium porphyrins have been prepared in yields of 25-57%. The direct route also can be used with Cu(OAc)(2).H(2)O to give the copper porphyrin albeit in low yield. In summary, this methodology readily affords palladium porphyrins directly from acyldipyrromethanes.     

Novel palladium complexes employing mixed phosphine phosphonates and phosphine phosphinates as anionic chelating [P,O] ligands

A route to various substituted phosphine phosphonic acid compounds of the general form Ar(2)PC(6)H(4)PO(OH)(2) (Ar = Ph, o-MeC(6)H(4), o-MeOC(6)H(4)) has been investigated. These compounds were employed as bidentate anionic [P,O] ligands in neutral palladium complexes. The [P,O] chelating coordination was determined by X-ray crystallography of a representative palladium complex. Furthermore, the bifunctional ligand Ph(2)PC(6)H(4)PO(OH)Ph represents the first example of a chelating anionic [P,O] ligand resulting from the combination of a phosphine and a phosphinate moiety.     

Hydrogen storage properties of isocyanide-stabilized palladium nanoparticles

Monodispersed palladium nanoparticles protected with n-octyl isocyanide were prepared, and their hydrogen absorption behavior was evaluated. The formation of the nanoparticles has been confirmed by means of 1H NMR and elemental analysis. Fourier transform infrared (FT-IR) showed that three distinct bands (2156, 1964, and 1611 cm(-1)) assigned to mono-, double-, and triple-bridged isocyanide ligands on the palladium surface. The average diameter of the particles was estimated to be 2.1 +/- 0.7 nm from observation by transmission electron microscopy (TEM). X-ray photoelectron spectroscopy (XPS) analysis revealed that the particles contained Pd(0) with little amounts of Pd(II) or Pd(IV), in sharp contrast to the thiol- or phosphine-stabilized palladium nanoparticles. The absorption and desorption of hydrogen were reversible, and the reactions were much faster for the nanoparticles than for the bulk palladium metal, whereas the storage capacity was almost the same, 0.6 wt %.     

Separation of trace amounts of palladium (II) with crown ether from hydrochloric acid and potassium thiocyanate media

A new method for the separation of trace amounts of palladium from hydrochloric acid and potassium thiocyanate media has been established based on the formation of an ion-pair complex of palladium thiocyanate anion Pd(SCN)4(2-) and the cationic potassium complex of dicyclohexyl- 18-crown-6 (DC18C6) in chloroform. The effect of various factors (solvent, crown ether, potassium thiocyanate, hydrochloric acid, reagent concentration, shaking time, phase volume ratio, composition of the extracted species, foreign ions, etc.) on the extraction and back-extraction of palladium has been investigated. The method can be combined with subsequent FAAS determination of palladium. The procedure was applied to determine palladium traces in chloroplatinic acid and rhodium chloride.     

N,N（二甲庚基）乙酰胺萃钯机理研究

本文研究了N,N二甲庚基乙酰胺(N_(s03))从氯化物体系中萃取钯的机理。应用等摩尔系列法和斜率法确定萃合物组成为:(CH_3CONR_2H)_2PdCl_4。通过紫外-可见光谱法研究,证实N_(503)萃取钯的机理属阴离子交换反应,其萃取方程式为: 2CH_3CONR_2HCl_((o)) PdCl_4~(2-)(a)?(CH_3CONR_2H)_2PdCl_4(o) 2Cl~-(a)     

Pd.H-C Interactions. Preparation and Structure of Orthometalated Tetranuclear Complexes of Palladium(II) and Platinum(II)

The reaction of 2-(1-naphthyl)benzothiazoline with palladium(II) acetate leads to helical mononuclear and orthometalated tetranuclear products. The molecular structures of mononuclear palladium(II) [Pd(H1-nabz)(2)] (1) (H(2)1-nabz = 2-N-(1-naphthylmethylideneamino)benzenethiolate), tetranuclear palladium(II) [Pd(4)(1-nabz)(4)] (2) and tetranuclear platinum(II) [Pt(4)(1-nabz)(4)] (3) have been determined by single-crystal X-ray diffraction method. Crystal data for complex 1 are as follows: a = 14.208(3) ?, b = 18.227(4) ?, c = 14.398(8) ?; beta = 94.55(3) degrees; V = 3717.0(23) ?(3); space group = P2(1)/n, Z = 4. Crystal data for the complex 2 are as follows: a = b = 15.798(3) ?, c = 23.728(4) ?; V = 5921.7(20) ?(3); space group = I4(1)/a, Z = 16 for the Pd(1-nabz) unit. Crystal data for the complex 3 are as follows: a = b = 15.496(2) ?, c = 24.348(3) ?; V = 5846.3(20) ?(3); space group = I4(1)/a, Z = 16 for the Pt(1-nabz) unit. The mononuclear palladium(II) complex reveals short ortho-hydrogen.palladium distances of 2.66(7) and 2.48(7) ?. These short distances and (1)H NMR studies provide a M.H-C interaction which can be regarded as a three-center four-electron interaction. The molecular structures of 2 and 3 confirm the formation of unusual tetranuclear compounds featuring a rare C,N,S-tridentate ligand derived from orthometalation of pendant side arm. The structural and chemical properties of the mononuclear palladium(II) complex 1 clearly suggest that 1 is a potential intermediate in the formation of the tetranuclear complex 2 by orthometalation reactions.     

Palladium-catalyzed cross-coupling reactions of 4-tosyl-2(5H)-furanone with boronic acids: a facile and efficient route to generate 4-substituted 2(5H)-furanones

An efficient and facile synthesis of 4-substituted 2(5H)-furanones using palladium catalyzed cross-coupling reactions between 4-tosyl-2(5H)-furanone and boronic acids is reported herein.     

Unusual carbon-sulfur bond cleavage in the reaction of a new type of bulky hexathioether with a zerovalent palladium complex

The reaction of a bulky hexathioether, TbtS(o-Phen)S(o-Phen)SS(o-Phen)S(o-Phen)STbt (o-Phen = o-phenylene, Tbt = 2,4,6-tris[bis(trimethylsilyl)methyl]phenyl) (1), with 3 molar amounts of Pd(PPh3)4 afforded trinuclear palladium complex bridged by two benzenedithiolato ligands via a three-step palladium insertion reaction into one sulfur-sulfur and two carbon-sulfur bonds of 1.     

Zero-crossing second derivative spectrophotometry for simultaneous determination of palladium and nickel using 1-(2-pyridylazo)-2-naphthol in mixed micellar solutions

1-(2-Pyridylazo)-2-naphthol (PAN) has been used for the simultaneous determination of nickel and palladium at trace levels. PAN complexes of nickel and palladium in the pH 1.98 form red and green colored complexes, respectively, which are soluble in aqueous 4:1 Triton X-100 to sodium dodecylsulfate (SDS) micellar media with total detergent concentration of 3.2%. Under optimum conditions, calibration graphs for the simultaneous determination by second derivative spectrophotometry were obtained. Zero crossing second derivative spectrophotometry at 668 and 572 nm, respectively for palladium and nickel was used for the simultaneous determination. The method is able to determine palladium to nickel ratio 70:1 to 1:6 (Wt/Wt), accurately. Accuracy and reproducibility of the determination method on the known various amounts of palladium and nickel in their binary mixtures were tested. Effects of diverse ions on the determination of palladium and nickel to investigate selectivity of the method also were studied.     

ESI-FTICR-MS studies on gas phase fragmentation reactions of ArPd(PPh3)2I complexes

Gas-phase fragmentation reactions of [ArPd(PPh3)2]+ were studied by electrospray ionization Fourier transform ion cyclotron resonance mass spectrometry (ESI-FTICR-MS). The results of sustained off-resonance irradiation collision-activated dissociation (SORI-CAD) experiments provide detailed insights into mechanisms for the gas-phase fragmentation reactions of these complex ions. The PC bond cleavage mediated by palladium is investigated in the gas phase. There are two competitive fragmentation pathways for the complex ions [ArPd(PPh3)2]+ (Ar = p-OCH3-C6H4, p-CH3-C6H4, p-tBu-C6H4, p-NH2-C6H4, p-COCH3-C6H4, and p-F-C6H4) of electron-donating and electron-withdrawing aromatic iodides. Path A proceeds through reductive elimination of [ArPd(PPh3)2]+ to produce the product ion [PPh3Ar]+. Path B mostly proceeds via phenyl migration from the triphenylphosphine ligand to the palladium center by cleavage of the phosphorus-phenyl bond to give a palladium-phenyl intermediate, and subsequent reductive elimination of the intermediate to yield a product ion [PPh4]+. The result of deuterium-labeling experiments provides evidence for the phenyl shift between the palladium center and the coordinated ligand through cleavage of the PC bond. The complex ions [(o-CH3-C6H4)Pd(PPh3)2]+, [(o-2,6-Me2-C6H3)Pd(PPh3)2]+, and [(C10H7)Pd(PPh3)2]+ display more fragmentation pathways, two of which are similar to those of the ions [ArPd(PPh3)2]+ (Ar = p-OCH3-C6H4, p-CH3-C6H4, p-tBu-C6H4, p-NH2-C6H4, p-COCH3-C6H4, p-F-C6H4), and the third pathway involves loss of one molecule of benzene and one PPh3 ligand. The electronic effect and steric effect of the aryl groups also exhibit different influences on the fragmentation pathways.     

添加剂作用下钯电沉积行为研究

在含有4 g•L－1 Pd(NH3)2Cl2和104 g•L－1 NH4H2PO4的闪镀钯基础电解液中,采用极化曲线、循环伏安法和计时安培法研究添加剂作用下钯在玻璃碳电极上的电沉积和电结晶行为.结果表明,添加剂阻化钯的电沉积;钯在玻碳电极上的交换电流密度很低;钯电沉积过程经历了晶核形成过程,其电结晶机理在不含添加剂时接近于三维连续成核,含添加剂时接近于三维瞬时成核.     

Amperometric titration of palladium, silver and copper with benzimidazol-2-ylmethanethiol, and its application to non-ferrous materials

A method is described for the determination of mg amounts of palladium, silver and copper by amperometric titration with benzimidazol-2-ylmethanethiol in acetate buifer medium (pH 4-5) at an applied potential of -0.2 V vs. the saturated calomel electrode. Direct titrations are possible in the presence of a number of foreign ions. Copper and palladium interfere mutually and in the determination of silver. Mercury(I), mercury(II) and platinum(IV) also interfere. Silver does not interfere in the determination of copper and palladium if it is first precipitated as chloride. The method has been successfully applied to the analysis of non-ferrous materials.