Oxidative cyclization of thiosemicarbazone: an optical and turn-on fluorescent chemodosimeter for Cu(II)

A weakly fluorescent thiosemicabazone (L(1)H) was found to be a selective optical and "turn-on" fluorescent chemodosimeter for Cu(2+) ion in aqueous medium. A significant fluorescence enhancement along with change in color was only observed for Cu(2+) ion; among the other tested metal ions (viz. Na(+), K(+), Mg(2+), Ca(2+), Cr(3+), Zn(2+), Cd(2+), Hg(2+), Pb(2+), Ag(+), Ni(2+), Co(2+), Fe(3+) and Mn(2+)). The Cu(2+) selectivity resulted from an oxidative cyclization of the weak fluorescent L(1)H into highly fluorescent rigid 4,5-dihydro-5,5-dimethyl-4-(naphthalen-5-yl)-1,2,4-triazole-3-thione (L(2)). The signaling mechanism has been confirmed by independent synthesis with detail characterization of L(2).     

A highly selective on/off fluorescence sensor for cadmium(II)

A polypyridyl ligand, 2,3,6,7,10,11-hexakis(2-pyridyl)dipyrazino[2,3-f:2',3'-h]quinoxaline (HPDQ), was found to have excellent fluorescent selectivity for Cd(2+) over many other metal ions (K(+), Na(+), Ca(2+), Mg(2+), Mn(2+), Fe(2+), Ni(2+), Co(2+), Cu(2+), Ag(+), Hg(2+), Zn(2+), and Cr(3+)) based on the intramolecular charge-transfer mechanism, which makes HPDQ a potential fluorescence sensor or probe for Cd(2+). An obvious color change between HPDQ and HPDQ + Cd(2+) can be visually observed by the naked eye. The structure of the complex HPDQ-Cd has been characterized by X-ray crystallography. Density functional theory calculation results on the HPDQ and HPDQ-Cd complexes could explain the experimental results.     

Selective colorimetric sensing of Cu2+ using triazolyl monoazo derivative

Although the high sensitivity, high selectivity and fast response make emission (fluorescence) based technique as one of the most promising tool for developing the chemosensors for metal ions, the past few years have witnessed a demand for the absorption based chemosensors for paramagnetic heavy metal ions, especially Cu(2+). Being paramagnetic, Cu(2+) leads to the low signal outputs ("turn-off") caused by decreased emission which may sometimes give false positive response, rendering the emission based technique less reliable for analytical purposes. Herein, we report synthesis and characterization of a hetarylazo derivative, characterized by a strong charge-transfer band which gets attenuated convincingly in the presence of Cu(2+) leading to distinct naked-eye color change (yellow to purple), and to a lesser extent in the presence of Cd(2+), Zn(2+), Co(2+), Pb(2+), Fe(2+), Ni(2+), Fe(3+) and Hg(2+) for which the naked eye sensitivity was comparatively (w.r.t. Cu(2+)) much less. No response was observed for the other metal ions including Li(+), Na(+), K(+), Mg(2+), Ca(2+), Ba(2+), Mn(2+), Ag(+), Zn(2+), Cd(2+), Pb(2+), and lanthanides Ce(3+), La(3+), Pr(3+), Eu(3+), Nd(3+), Lu(3+), Yb(3+), Tb(3+), Sm(3+), Gd(3+). The proposed sensing mechanism has been ascribed to the stabilization of LUMO after complexation with Cu(2+) and a 1:1 stoichiometry has been deduced.     

New fluorogenic sensors for Hg2+ ions: through-bond energy transfer from pentaquinone to rhodamine

New pentaquinone derivatives 5 and 8 having rhodamine moieties have been designed and synthesized that undergo through-bond energy transfer (TBET) in the presence of Hg(2+) ions among the various cations (Cu(2+), Pb(2+), Fe(2+), Fe(3+), Zn(2+), Ni(2+), Cd(2+), Co(2+), Ag(+), Ba(2+), Mg(2+), K(+), Na(+), and Li(+)) tested in mixed aqueous media.     

Separation and determination of cations in beverage products by capillary zone electrophoresis

Cation determination is important for quality control of beverage products. To determine a large group simultaneously, a capillary electrophoresis procedure is developed with indirect UV at 214 nm in a three-complex buffer system (10 mM N,N-dimethylbenzylamine (DBA), 8 mM lactic acid and 2 mM 18-crown-6) with good mobility matching with desired cations. Under optimized conditions with pH adjusted to 4.65, a baseline separation is achieved for 14 cations (Rb(+), NH(4)(+), K(+), Ca(2+), Na(+), Mg(2+), Mn(2+), Co(2+), Fe(2+), Cd(2+), Cr(3+), Ni(2+), Zn(2+) and Cu(2+)) within 7 min using an uncoated silica column. To cover ng/l to mug/l range, both hydrostatic and electrokinetic sampling are studied, showing working ranges within (0.05-50)/(0.005-2) microg/l and detection limits (13-78)/(1.4-10) ng/l, respectively with satisfactory repeatability (RSD 0.31-0.47% for migration time, and 3.0-4.0% for peak height measurement). Agreeable results with established inductively coupled plasma-atomic emission spectrometry method have been obtained for orange juice and tea samples.     

A naphthalene exciplex based Al3+ selective on-type fluorescent probe for living cells at the physiological pH range: experimental and computational studies

2-((Naphthalen-6-yl)methylthio)ethanol (HL) was prepared by one pot synthesis using 2-mercaptoethanol and 2-bromomethylnaphthalene. It was found to be a highly selective fluorescent sensor for Al(3+) in the physiological pH (pH 7.0-8.0). It could sense Al(3+) bound to cells through fluorescence microscopy. Metal ions like Mn(2+), Fe(3+), Co(2+), Ni(2+), Cu(2+), Zn(2+), Ag(+), Cd(2+), Hg(2+), Cr(3+) and Pb(2+) did not interfere. No interference was also observed with anions like Cl(-), Br(-), F(-), SO(4)(2-), NO(3)(-), CO(3)(2-), HPO(4)(2-) and SCN(-). Experimentally observed structural and spectroscopic features of HL and its Al(3+) complex have been substantiated by computational calculations using density functional theory (DFT) and time dependent density functional theory (TDDFT).     

Indirect spectrophotometric determination of sulphide with the ternary complex system Ag(I)-phen-BPR

Trace amounts of sulphide can be determined from its effect on the ternary complex system of Ag(+), Bromopyrogallol Red (BPR), and 1,10-phenanthroline (phen). Sulphide in the range 5-120 ng/ml causes a decrease in absorption, that is a linear function of the concentration. Common metal ions such as Na(+), K(+), Ca(2+), Mg(2+), Al(3+), Mn(2+) and anions such as F(-), Cl(-), NO(-)(3), SO(2-)(4), CO(2-)(3), and PO(3-)(4) at the 4 mug/ml level or more do not interfere, but I(-) or CN(-) must be absent.     

Compact wave functions for the beryllium isoelectronic series, Li- to Ne6+: a standard Hylleraas approach

Variational calculations have been carried out for the ground states of several members of the beryllium isoelectronic series using a standard Hylleraas approach involving Slater-type basis functions. The species examined are Li(-), Be, B(+), C(2+), N(3+), O(4+), F(5+), and Ne(6+). For each species, the nonrelativistic energy, the electronic density at the nucleus, the expectation value , the moments for n = -1, 1, 2, and 3, and for n = -1, 1, and 2, are reported. With relatively compact basis sets, the ground state energies are obtained with uncertainties ranging from 50 parts per million to just under 4 parts per million.     

Effect of metal ions (Li+, Na+, K+, Mg2+, Ca2+, Ni2+, Cu2+, and Zn2+) and water coordination on the structure and properties of L-arginine and zwitterionic L-arginine

Interactions between metal ions and amino acids are common both in solution and in the gas phase. The effect of metal ions and water on the structure of L-arginine is examined. The effects of metal ions (Li(+), Na(+), K(+), Mg(2+), Ca(2+), Ni(2+), Cu(2+), and Zn(2+)) and water on structures of Arg x M(H2O)m , m = 0, 1 complexes have been determined theoretically by employing the density functional theories (DFT) and using extended basis sets. Of the three stable complexes investigated, the relative stability of the gas-phase complexes computed with DFT methods (with the exception of K(+) systems) suggests metallic complexes of the neutral L-arginine to be the most stable species. The calculations of monohydrated systems show that even one water molecule has a profound effect on the relative stability of individual complexes. Proton dissociation enthalpies and Gibbs energies of arginine in the presence of the metal cations Li(+), Na(+), K(+), Mg(2+), Ca(2+), Ni(2+), Cu(2+), and Zn(2+) were also computed. Its gas-phase acidity considerably increases upon chelation. Of the Lewis acids investigated, the strongest affinity to arginine is exhibited by the Cu(2+) cation. The computed Gibbs energies DeltaG(o) are negative, span a rather broad energy interval (from -150 to -1500 kJ/mol), and are appreciably lowered upon hydration.     

Highly sensitive and fast responsive fluorescence turn-on chemodosimeter for Cu2+ and its application in live cell imaging

A rhodamine B derivative 4 containing a highly electron-rich S atom has been synthesized as a fluorescence turn-on chemodosimeter for Cu(2+). Following Cu(2+)-promoted ring-opening, redox and hydrolysis reactions, comparable amplifications of absorption and fluorescence signals were observed upon addition of Cu(2+); this suggests that chemodosimeter 4 effectively avoided the fluorescence quenching caused by the paramagnetic nature of Cu(2+). Importantly, 4 can selectively recognize Cu(2+) in aqueous media in the presence of other trace metal ions in organisms (such as Fe(3+), Fe(2+), Cu(+), Zn(2+), Cr(3+), Mn(2+), Co(2+), and Ni(2+)), abundant cellular cations (such as Na(+), K(+), Mg(2+), and Ca(2+)), and the prevalent toxic metal ions in the environment (such as Pb(2+) and Cd(2+)) with high sensitivity (detection limit < or =10 ppb) and a rapid response time (< or =1 min). Moreover, by virtue of the chemodosimeter as fluorescent probe for Cu(2+), confocal and two-photon microscopy experiments revealed a significant increase of intracellular Cu(2+) concentration and the subcellular distribution of Cu(2+), which was internalized into the living HeLa cells upon incubation in growth medium supplemented with 50 muM CuCl(2) for 20 h.     

Ring currents as probes of the aromaticity of inorganic monocycles : P5-, As5-, S2N2, S3N3-, S4N3+, S4N42+, S5N5+, S42+ and Se42+

Current-density maps were calculated by the ipsocentric CTOCD-DZ/6-311G** (CTOCD-DZ=continuous transformation of origin of current density-diamagnetic zero) approach for three sets of inorganic monocycles: S(4) (2+), Se(4) (2+), S(2)N(2), P(5) (-) and As(5) (-) with 6 pi electrons; S(3)N(3) (-), S(4)N(3) (+) and S(4)N(4) (2+) with 10 pi electrons; and S(5)N(5) (+) with 14 pi electrons. Ipsocentric orbital analysis was used to partition the currents into contributions from small groups of active electrons and to interpret the contributions in terms of symmetry- and energy-based selection rules. All nine systems were found to support diatropic pi currents, reinforced by sigma circulations in P(5) (-), As(5) (-), S(3)N(3) (-), S(4)N(3) (+), S(4)N(4) (2+) and S(5)N(5) (+), but opposed by them in S(4) (2+), Se(4) (2+) and S(2)N(2). The opposition of pi and sigma effects in the four-membered rings is compatible with height profiles of calculated NICS (nucleus-independent chemical shifts).     

Ru(II) electron transfer systems containing S-donor ligands

The synthesis and properties of 3 new ligand-bridged bimetallic complexes, 1(2+), 2(2+), and 3(2+), containing [RuCl([9]aneS(3))](+) metal centers are reported. Each complex was bridged by a different ditopic ligand. 1(2+) is bridged by 3,6-bis(2-pyridyl)-1,2,4,5-tetrazine (bptz), while 2(2+) and 3(2+) are bridged by 2,3-bis(2-pyridyl)pyrazine (dpp) and 2,2'-bipyrimidine (bpym), respectively. The Ru([II]) isovalent states of these complexes have been investigated using a variety of techniques. In the case of 3(2+), X-ray crystallography studies show preferential crystallization of an anti form with respect to coordinated chloride ligands (crystal data for [3][Cl(2)].4H(2)O: C(20)H(38)Cl(4)N(4)O(4)Ru(2)S(6), monoclinic, space group P2(1)/a, a = 10.929(14), b = 13.514(17), c = 11.299(16) A, beta = 90.52(1), V = 1669 A(3), Z = 2). UV/vis spectroscopy shows that spectra of these complexes are dominated by intraligand (pi-->pi) and metal-to-ligand Ru(d)-->L(pi) charge transfer transitions. Electrochemical studies reveal that metal-metal interactions are sufficiently intense to generate the Ru(III)/Ru(II) mixed valence [[RuCl([9]aneS(3))(2)](L-L)](3+) state, where L-L = individual bridging ligands. Although the 1(3+), 2(3+), and 3(3+) mixed valence states were EPR silent at room temperature and 77 K, isotropic solution spectra were observed for the electrochemically generated radical cations 1(+), 2(+), and 3(+), with 1(+) displaying well-resolved hyperfine coupling to bridging ligand nitrogens. Using UV/vis/NIR spectroelectrochemistry, we investigated optical properties of the mixed valence complexes. All three showed intervalence charge transfer (IVCT) bands that are much more intense than electrochemical data indicate. Indeed, a comparison of IVCT data for 1(3+) with an analogous structure containing [(NH3)(3)Ru](2+) metal centers shows that the IVCT in the new complex is an order of magnitude more intense. It is concluded that although the new complexes show relatively weak electrostatic interactions, they possess large resonance energies.     

PVC ion-selective electrodes based on calcium bis-[dialkyl- and di-(4-alkylphenyl) phosphates] and mixed solvent mediators

PVC calcium ion-selective electrodes based on either calcium bis-di(n-decyl)phosphate or calcium bis-di[4-(1,1,3,3-tetramethylbutyl)phenyl]phosphate with various solvent mediators (alone or in pairs) have been evaluated with particular respect to interference from Na(+), K(+), Mg(2+), Sr(2+), Ba(2+), Mn(2+), Cu(2+), Ni(2+) and Zn(2+) ions. PVC calcium ion-selective electrodes based on calcium bis-di[4-(n-octyl)phenyl]phosphate with varied amounts of decan-l-ol plus di-n-octyl phenylphosphonate showed a continuous gradation in selectivity coefficients on going from a high fraction of decan-l-ol to a high fraction of the second mediator. Thus, k(pot)(Ca,Mg) changed from 1.6 for an electrode based exclusively on decan-l-ol to 4.9 x 10(-4) for one based completely on di-n-octyl phenylphosphonate. The corresponding k(pot)(Ca,Na) values were 7.0 x 10(-2) and 1.1 x 10(-3).     

A naphthalene-based Al3+ selective fluorescent sensor for living cell imaging

An efficient fluorescent Al(3+) receptor, N-(2-hydroxy-1-naphthalene)-N'-(2-(2-hydroxy-1-naphthalene)amino-ethyl)-ethane-1,2-diamine (L) has been synthesized by the condensation reaction between 2-hydroxy naphthaldehyde and diethylenetriamine. High selectivity and affinity of L towards Al(3+) in ethanol (EtOH) as well as in HEPES buffer at pH 7.4, makes it suitable to detect intracellular Al(3+) with fluorescence microscopy. Metal ions, viz. Li(+), Na(+), K(+), Mg(2+), Ca(2+), Mn(2+), Co(2+), Ni(2+), Cu(2+), Zn(2+), Ag(+), Cd(2+), Hg(2+) and Pb(2+) do not interfere. The lowest detection limit for Al(3+) is 3.0 × 10(-7) M and 1.0 × 10(-7) M in EtOH and HEPES buffer respectively.     

New masking procedure for selective complexometric determination of copper(II)

A study has been made of a new masking procedure for highly selective complexometric determination of copper(II), based on decomposition of the copper-EDTA complex at pH 5-6. Among the various combinations of masking agents tried, ternary masking mixtures comprising a main complexing agent (thiourea), a reducing agent (ascorbic acid) and an auxiliary complexing agent (thiosemicarbazide or a small amount of 1,10-phenanthroline or 2,2'-dipyridyl) have been found most suitable. An excess of EDTA is added and the surplus EDTA is back-titrated with lead (or zinc) nitrate with Xylenol Orange as indicator (pH 5-6). A masking mixture is then added to decompose the copper-EDTA complex and the liberated EDTA is again back-titrated with lead (or zinc) nitrate. The following cations do not interfere: Ag(+), Hg(2+), Pb(2+), Ni(2+), Bi(3+), As(3+), Al(3+), Sb(3+), Sn(4+), Cd(2+), Co(2+), Cr(3+) and moderate amounts of Fe(3+) and Mn(2+). The notable feature is that consecutive determination of Hg(2+) and Cu(2+) can be conveniently carried out in the presence of other cations.     

A new ion sensor based on fiber optics

A fluorimetric ion sensor based on fiber optics has been developed that employs Rhodamine 6G hydrophobically and electrostatically "trapped" on a Nafion film. The sensor is based on the measurement of quenching or enhancement of the Rhodamine 6G fluorescence by various ions. It was found that ions such as Co(2+), Cr(3+), Fe(2+), Fe(3+), Cu(2+), Ni(2+) and NH(+)(4) rapidly quench the Rhodamine 6G fluorescence at an initial rate that depends on the concentration of the ion. This quenching is then readily reversed by the addition of "reverser" ions such as H(+), Li(+), Na(+), K(+), Ba(2+), Ca(2+), Mn(2+), Zn(2+) and Mg(2+). Again, the initial rate for the attainment of the original fluorescence was found to depend on the concentration of the reverser ion. Therefore, by monitoring the quenching directly the concentration of quencher ions can be determined. In addition, by loading the film with quencher and monitoring the initial rate of return towards the original baseline signal, it is possible to determine non-quenching ions.     

Studies on metallochromic indicators-III Hematoxylin and hematein

The use of hematoxylin and hematein as metallochromic indicators in direct EDTA titration of Zr(4+), Th(4+), Bi(3+), VO(+), Ga(3+), In(3+), Al(3+), Pb(+), Zn(2+), Mn(2+), Cd(2+), Cu(2+), Ni(2+), Co(2+), Mg(2+), and a few rare earths is described. Aluminium is titrated directly in presence of acetate buffer, lactic or glycoliic acid being used as auxiliary complexing agent. Mixtures of two metal ions can be titrated if one is Bi(3+) and the other Al(3+), Pb(2+), Zn(2+), Cu(2+), Cd(2+), La(3+), Ce(3+), Pr(3+), Nd(3+), Sm(3+), Gd(3+) or Er(3+). Aluminium alloys can be analysed via EDTA titrations, with these indicators.     

Development and applications of fluorescent indicators for Mg2+ and Zn2+

In a study of the spectroscopic behavior of two Schiff base derivatives, salicylaldehyde salicylhydrazone (1) and salicylaldehyde benzoylhydrazone (2), Schiff base 1 has high selectivity for Zn(2+) ion not only in abiotic systems but also in living cells. The ion selectivity of 1 for Zn(2+) can be switched for Mg(2+) by swapping the solvent from ethanol-water to DMF (N,N-dimethylformamide)-water mixtures. Imine 2 is a good fluorescent probe for Zn(2+) in ethanol-water media. Many other ions tested, such as Li(+), Na(+), Al(3+), K(+), Ca(2+), Cr(3+), Mn(2+), Fe(3+), Co(2+), Ni(2+), Cu(2+), Ag(+), Cd(2+), Sn(2+), Ba(2+), Hg(2+), and Pb(2+), failed to induce any spectral change in various solvents. The selectivity mechanism of 1 and 2 for metal ions is based on a combinational effect of proton transfer (ESPT), C═N isomerization, and chelation-enhanced fluorescence (CHEF). The coordination modes of the complexes were investigated.     

Colorimetric detection of Fe3+ ions using pyrophosphate functionalized gold nanoparticles

A sensitive, selective colorimetric Fe(3+) detection method has been developed by using pyrophosphate functionalized gold nanoparticles (P(2)O(7)(4-)-AuNPs). Gold nanoparticles were prepared by reducing HAuCl(4) with sodium borohydride, in the presence of Na(4)P(2)O(7). IR spectra suggested that pyrophosphates were capped on the surface of the gold nanoparticles. Aggregation of P(2)O(7)(4-)-AuNPs was induced immediately in the presence of Fe(3+) ions, yielding a color change from pink to violet. This Fe(3+)-induced aggregation of P(2)O(7)(4-)-AuNPs was monitored using first the naked eye and then UV-vis spectroscopy with a detection limit of 5.6 μM. The P(2)O(7)(4-)-AuNPs bound by Fe(3+) showed excellent selectivity compared to other metal ions (Ca(2+), Cd(2+), Co(2+), Fe(2+), Hg(2+), K(+), Mg(2+), Mn(2+), Na(+), Ni(2+), Pb(2+), and Zn(2+)). The best detection of Fe(3+) was achieved in a pH range from 3 to 9. In addition, the P(2)O(7)(4-)-AuNPs were also used to detect Fe(3+) in lake water samples, with low interference.     

Hg2+-sensing system based on structures of complexes

The first example of a new Hg(2+)-sensing system based on the structures of complexes is reported. The system uses a combination of a new chiral bidentate ligand and CD spectroscopy. Significant CD spectral changes are observed when Hg(2+) is added, whereas no CD spectral changes are observed in the cases of Li(+), Na(+), K(+), Mg(2+), Ca(2+), Mn(2+), Fe(2+), Co(2+), Ni(2+), Cu(2+), Zn(2+), Rb(+), Ag(+), Cd(2+), La(3+), Gd(3+), and Pb(2+).