The hydrolysis of lead(II). A potentiometric and enthalpimetric study

The hydrolysis of lead(II) has been investigated by potentiometric titrations (ionic medium 1.0M NaClO(4) and 1.0M KNO(3)) and enthalpimetric titrations (ionic medium 1.0M NaClO(4)) at 25 degrees . The reaction model that gave the best fit to the data for 1.0M NaClO(4) comprised the following five ions: Pb(OH)(+), Pb(3)(OH)(2+)(4), Pb(3)(OH)(+)(5), Pb(4)(OH)(4+)(4) and Pb(6)(OH)(4+)(8). The formation constants, and enthalpy changes (kJ/mol) for these species, defined according to equation (1), have the values log beta(11) = -7.8, DeltaH(0)(11) = 24; log beta(34) = -22.69, DeltaH(0)(34) = 112; log beta(35) = -30.8, DeltaH(0)(35) = 146; log beta(44) = -19.58, DeltaH(0)(44) = 86; log beta(68) = -42.43, DeltaH(0)(68) = 215. Equilibrium constants determined in nitrate medium show good agreement with those pertaining to perchlorate medium if complexation of lead(II) with nitrate is taken into account.     

Mixed hydroxide complex formation and solubility of bismuth in nitrate and perchlorate medium

From the precipitation borderlines in the pBi'-pH diagram, determined experimentally under CO(2)-free conditions, the stability constants of bismuth hydroxide, bismuthoxynitrate and bismuthoxyperchlorate have been established. The following values have been found Nitrate-medium: Perchlorate-medium: log *K(SO)(OH) = 5.2, log *K(SO)(OH) = 5.2; log *K(SO)(NO(3)) = -1.2, log*K(SO)(ClO(4)) = -0.9; log *beta(2) = -4.0, log *beta(2) = -4.1; log *beta(3) = -10.0, log *beta(3)= -9.9; log *beta(4) = -21.5, log *beta(4) = -21.5; log *beta(1,0,1) = 1.2, log *beta(1,0,1) = 3.5. The constants refer to precipitates equilibrated for 30 min, prepared at room temperature (23 +/- 0.5 degrees) in sodium perchlorate or sodium nitrate medium with an ionic strength of 1.00 +/- 0.01. Concerning error propagation it is stated that pBi' values calculated with these constants will have a standard deviation of about 0.1 log unit.     

Proton control of oxidation and spin state in a series of iron tripodal imidazole complexes

Reaction of iron salts with three tripodal imidazole ligands, H(3)(1), H(3)(2), H(3)(3), formed from the condensation of tris(2-aminoethyl)amine (tren) with 3 equiv of an imidazole carboxaldehyde yielded eight new cationic iron(III) and iron(II), [FeH(3)L](3+or2+), and neutral iron(III), FeL, complexes. All complexes were characterized by EA(CHN), IR, UV, M?ssbauer, mass spectral techniques and cyclic voltammetry. Structures of three of the complexes, Fe(2).3H(2)O (C(18)H(27)FeN(10)O(3), a = b = c = 20.2707(5), cubic, I3d, Z = 16), Fe(3).4.5H(2)O (C(18)H(30)FeN(10)O(4.5), a = 20.9986(10), b = 11.7098(5), c = 19.9405(9), beta = 109.141(1), monoclinic, P2(1)/c), Z = 8), and [FeH(3)(3)](ClO(4))(2).H(2)O (C(18)H(26)Cl(2)FeN(10)O(9), a = 9.4848(4), b = 23.2354(9), c = 12.2048(5), beta = 111.147(1) degrees, monoclinic, P2(1)/n, Z = 4) were determined at 100 K. The structures are similar to one another and feature an octahedral iron with facial coordination of imidazoles and imine nitrogen atoms. The iron(III) complexes of the deprotonated ligands, Fe(1), Fe(2), and Fe(3), are low-spin while the protonated iron(III) cationic complexes, [FeH(3)(1)](ClO(4))(3) and [FeH(3)(2)](ClO(4))(3), are high-spin and spin-crossover, respectively. The iron(II) cationic complexes, [FeH(3)(1)]S(4)O(6), [FeH(3)(2)](ClO(4))(2), [FeH(3)(3)](ClO(4))(2), and [FeH(3)(3)][B(C(6)H(5))(4)](2) exhibit spin-crossover behavior. Cyclic voltammetric measurements on the series of complexes show that complete deprotonation of the ligands produces a negative shift in the Fe(III)/Fe(II) reduction potential of 981 mV on average. Deprotonation in air of either cationic iron(II) or iron(III) complexes, [FeH(3)L](3+or2+), yields the neutral iron(III) complex, FeL. The process is reversible for Fe(3), where protonation of Fe(3) yields [FeH(3)(3)](2+).     

The use of outer-sphere complex formation reactions in ion-exchange chromatography Separation of oxalate and sulphate ions

It has been found that outer-sphere complex formation reactions can be used to increase the selectivity of ion-exchange separations. A method has been developed for the quantitative separation of sulphate and oxalate. The stability constants of the sulphate and oxalate complexes of tris(ethylenediamine) cobalt(III) and hexa-amminecobalt(III) have been determined at different ionic strengths from the elution volumes and the parameters of the ion-exchanger bed, and the values at I = 0 have been obtained by extrapolation. They are log K[Co(en)(+3)(3) + SO(2-)(4)] = 3.38; log K[Co(NH(3))(3+)(6) + SO(2-)(4) = 3.60; log K[Co(en)(3+)(3) + C(2)O(2-)(4) = 3.23.     

Ionic strength dependence of formation constants-XVIII. The hydrolysis of iron(III) in aqueous KNO(3) solutions

The hydrolysis of iron(III) was studied potentiometrically at different ionic strengths in KNO(3) aqueous solutions, at 25 degrees C, to determine the dependence of hydrolysis constants on ionic strength (nitrate media), to check the existence of nitrate-ferric ion interactions, and to confirm the formation of high polymeric species. Under the experimental conditions 0.03 I (KNO(3)) 1M, 0.3 C 12 mM, the species Fe(OH)(2+), Fe(2)(OH)(4+)(2), Fe(OH)(+)(2) and Fe(12)(OH)(2+)(34) were found, and the hydrolysis constants log beta(11) = 2.20, log beta(12) = -2.91, log beta(22) = -5.7, log beta(12,34) = -48.9 (I = 0M) were calculated. The ionic strength dependence of hydrolysis constants is quite close to that found for several protonation and metal complex formation constants reported elsewhere.     

Polarographic studies of cadmium, zinc and manganese(II) iodide complexes in acetonitrile

Cadmium, zinc and manganese(II) iodide complexes have been studied polarographically in acetonitrile and the electrode reactions for these complexes discussed. The overall stability constants of the iodide complexes of these metal ions were evaluated and corrected for the effect of the ion-pairing electrolyte. The values for log beta(4) of CdI(4)(2-) and ZnI(4)(2-) are 26.2 and 18.4 respectively and the values found for the Mn(II) iodide complex are log beta(1) = 3.5, log beta(2) = 5.6, log beta(3) = 7.8, log beta(4)= 10.0, log beta(5) = 12.2 and log beta(6) = 14.4. Within certain limits, the wave-height for each complex is proportional to the metal concentration.     

Spectrophotometric and electrochemical determination of the formation constants of the complexes Curcumin-Fe(III)-water and Curcumin-Fe(II)-water

The formation of complexes among the Curcumin, Fe(III) and Fe(II) was studied in aqueous media within the 5-11 pH range by means of UV-Vis spectrophotometry and cyclic voltammetry. When the reaction between the Curcumin and the ions present in basic media took place, the resulting spectra of the systems Curcumin-Fe(III) and Curcumin-Fe(II) presented a similar behaviour. The cyclic voltammograms in basic media indicated that a chemical reaction has taken place between the Curcumin and Fe(III) before that of the formation of complexes. Data processing with SQUAD permitted to calculate the formation constants of the complexes Curcumin-Fe(III), corresponding to the species FeCur (lob beta110 = 22.25 +/- 0.03) and FeCur(OH)- (log beta111 = 12.14 +/- 0.03), while for the complexes Curcumin-Fe(II) the corresponding formation constants of the species FeCur- (log beta110 = 9.20 +/- 0.04), FeHCur (log beta111 = 19.76 +/- 0.03), FeH2Cur+ (log beta112 = 28.11 +/- 0.02).     

Interaction of palladium with sulphaguanidine

The formation constants of palladium with chloride ions have been determined by a new approach to the interpretation of the ultraviolet spectra. The interaction of PdCl(4)(2-) with sulphaguanidine (SG) has been interpreted and evaluated quantitatively. The formation constants of the mixed ligand complex Pd(SG)(2),Cl(2), were determined spectrophotometrically. The stability constants for the stepwise formation of the palladium chloride complexes are: log k(1) = 3.48; log k(2) = 2.79; log k(3) = 2.35; log k(4) = 1.1, and for the interaction of PdCl(4)(2-) with SG, log k(1) = 5.42; log k(2) = 4.38.     

Use of electrospray mass spectrometry (ESI-MS) for the study of europium(III) complexation with bis(dialkyltriazinyl)pyridines and its implications in the design of new extracting agents

ESI mass spectrometry was used to investigate the europium complexation by tridentate ligands L identical with 2,6-bis(5,6-dialkyl-1,2,4-triazin-3-yl)-pyridines (DATP) that have shown unique separation properties of actinides(III) from lanthanides(III) in nitric acid solutions. Complexes of three ligands, namely methyl (DMTP), n-propyl (DnPTP), and iso-propyl (DiPTP), have been investigated in acidic solutions to check the aqueous-phase stability of Eu(L)(3)(3+) ions identified previously in the solid state. The data obtained show, first, the presence of stable Eu(L)(3)(3+) ions with DnPTP (log beta(3)(app) = 12.0 +/- 0.5) and DiPTP (log beta(3)(app) = 14.0 +/- 0.6) in methanol/water (1:1 v/v) solutions under pH range 2.8-4.6 and, second, a mechanism whereby alkyl moieties contribute to a self-assembling process leading to the formation of Eu(L)(3)(3+) ions. Other complexes such as Eu(L)(2)(3+) ions are only observed for DnPTP (log beta(2)(app) = 6.7 +/- 0.5) and DMTP (log beta(2)(app) = 6.3 +/- 0.1) and Eu(L)(3+) only for DMTP (log beta(1)(app) = 2.9 +/- 0.2). The log beta(n)(app) values for the Eu(L)(n)(3+) (n = 1-3) complexes were determined at pH 2.8. Better insight was given in this study concerning the role of the hydrophobic exterior of the ligands for the design of a new range of extracting agents.     

The use of outer-sphere complex formation reactions in ion-exchange chromatography Separation of maleate and fumarate ions

Outer-sphere complex formation reactions have been used to increase the selectivity of ion-exchange separation of maleate and fumarate ions. The stability constants of the maleate and fumarate complexes of tris(ethylenediamine)cobalt(III) and hexa-amminecobalt(III) have been determined at different ionic strengths from the elution volumes and the parameters of the ion-exchanger bed, and the values at I = 0 obtained by extrapolation. They are: log K [Co(en)(3+)(3) + Ma(2-)] = 3.33; log K [Co(NH(3))(3+)(6) + Ma(2-)] = 3.77; log K [Co(en)(3+)(3) + Fu(2-)] = 1.19; log K [Co(NH(3))(3+)(6) + Fu(2-)] = 1.99. The two anions can be separated quantitatively.     

The complexes of bismuth(III) and nitrilotriacetic acid

The reaction between bismuth(III) and nitrilotriacetic acid (NTA or H(3)X) has been investigated by ultraviolet spectrophotometry. It has been established that bismuth(III) and NTA form two complexes with compositions bismuth(III): NTA = 1:1 and 1:2. The absorption maxima are at 243 nm (1:1) and 271 nm (1:2), the molar absorptivities being 8.00 x 10(3) and 8.20 x 10(3) l.mole(-1).cm(-1) respectively. The stability constants (at mu = 1.0) are: log beta(BiX) = 17.53 +/- 0.06 and log beta(B)(2)(3-) = 26.56 +/- 0.07. The possibility of the analytical application of BiX is briefly discussed.     

Characterization of 2,3-dihydroxyterephthalamides as M(IV) chelators

The ligand N,N'-diethyl-2,3-dihydroxyterephthalamide (ETAM) has been characterized as a chelator for Zr(IV), Ce(IV), and Th(IV). The K(+) salts of the complexes [Zr(ETAM)(4)](4)(-), [Ce(ETAM)(4)](4)(-), and [Th(ETAM)(4)](4)(-) were prepared in a MeOH solution containing H(2)ETAM, the corresponding M(acac)(4), and 4 equiv of KOH. Single-crystal X-ray diffraction analyses are reported for K(4)[Zr(ETAM)(4)] (C2/c, Z = 8, a = 27.576(3) A, b = 29.345(3) A, c = 15.266(2) A, alpha = 90 degrees, beta = 118.688(4) degrees, gamma = 90 degrees ), [Me(3)BnN](4)[Th(ETAM)(4)] (P, Z = 2, a = 13.7570(3) A, b = 13.9293(3) A, c = 26.9124(6) A, alpha = 99.941(1) degrees, beta = 94.972(1) degrees, gamma = 103.160(1) degrees ), and the dimeric (NMe(4))(4)[Th(ETAM)(3)MeOH](2) (P2(1)/c, Z = 4, a = 18.2603(9) A, b = 18.5002(9) A, c = 19.675(1) A, beta = 117.298(1) degrees ). Solution thermodynamic studies were used to determine formation constants (log K(f) and esd) for Th(IV)-ETAM log K(110) =17.47(1), log K(120) = 13.23(1), log K(130) = 8.28(3), log K(140) = 6.57(6), and log beta(140) = 45.54(5). These results support the hypothesis that the terephthalamides are high-affinity chelators for the actinide(IV) ions and thus promising ligands for use in nuclear waste remediation.     

The ammine, thiosulfato, and mixed ammine/thiosulfato complexes of silver(I) and gold(I)

The M(I)-NH(3), M(I)-S(2)O(3)(2)(-), and M(I)-S(2)O(3)(2)(-)-NH(3) systems (M = Ag, Au) were studied at 25 degrees C and at I = 0.1 M (NaClO(4)) using a variety of analytical techniques. For the Ag(I)-NH(3)-S(2)O(3)(2)(-) system, AgS(2)O(3)NH(3)(-) was detected with formation constant log beta(111) (for the reaction Ag(+) + S(2)O(3)(2)(-) + NH(3) <--> AgS(2)O(3)NH(3)(-)) of 11.2, 10.4, and 10.8 on the basis of silver potentiometry, UV-vis spectrophotometry, and hydrodynamic voltammetry, respectively. Also, the values of log beta(101)(AgNH(3)(+)), log beta(102)(Ag(NH(3))(2)(+)), log beta(110)(AgS(2)O(3)(-)), and log beta(120)(Ag(S(2)O(3))(2)(3)(-)), obtained from silver potentiometry, were 3.59, 7.0, 8.97, 13.1, respectively. In the case of the ammine complexes, the log beta(101)(AgNH(3)(+)) and log beta(102)(Ag(NH(3))(2)(+)) values were found to be 3.5 and 7.1, respectively, from the UV-vis spectrophotometric experiments. The mixed species AuS(2)O(3)NH(3)(-) was detected in UV-vis spectrophotometric, hydrodynamic voltammetric, and potentiometric experiments with the stepwise formation constants (log K(111)) of -4.0, -3.5, -3.8, respectively, for the reaction Au(S(2)O(3))(2)(3)(-) + NH(3) <--> AuS(2)O(3)NH(3)(-) + S(2)O(3)(2)(-). At higher [NH(3)]/[S(2)O(3)(2)(-)] ratios (>10(5)), the formation of Au(NH(3))(2)(+) was also detected in spectrophotometric and potentiometric experiments with stepwise formation constants (log K(102)) of -5.4 and -5.3, respectively, according to the reaction AuS(2)O(3)NH(3)(-) + NH(3) <--> Au(NH(3))(2)(+) + S(2)O(3)(2)(-).     

Analysis of variance applied to determinations of equilibrium constants

The statistical analysis of variance has been applied to the values of the equilibrium constants of the glycinate-proton and glycinate-nickel systems, determined in different laboratories by pH-titration in aqueous solution. The analysis shows how the main part of the error derives from the variability from one titration to another even in the same laboratory. Therefore the data for a single titration (k) must be processed separately, thus yielding a mean value for the equilibrium constant logbeta (pqr)(k) of the species M(p)H(q)L(r); from these mean values for different titrations in each laboratory l, a within-laboratory grand average, logbeta (pqr)(l), can be calculated; the variance of this grand average measures the experimental error. A further analysis of the data from the different participating laboratories shows that there were no significant differences between laboratories for the constants reported. From these results it can be inferred that all the values of the mean constants logbeta (pqr)(k) for one species, as determined separately for each titration in four laboratories, belong to the same population. A chi(2) analysis of these populations demonstrates that the stability constants of the species HL, H(2)L(+), NiL(+), NiL(2) (with L(-) = glycinate) are normally distributed, but not that for NiL(-)(3). Therefore, general mean values of the first four constants can be calculated and proposed as reliable standard values at 25 degrees and I = 1.0M Na(Cl): protonation of glycinate, log beta(011) = 9.651(12), log beta(021) = 12.071(26); nickel-glycinate complexes, log beta(101) = 5.615(35), log beta(102) = 10.363(62). These values indicate that the standard deviations are rather higher than those often reported in the literature.     

Solvent extraction of Cd(II) with N-cyclohexyl-N-nitrosohydroxylamine and 4-methylpyridine into methyl isobutyl ketone

The distribution equilibria of the complexes cadmium-cnha and cadmium-cnha-4-methylpyridine in the water-methyl isobutyl ketone system have been studied at 25 degrees , by using (109)Cd as a radiotracer to measure the metal distribution ratio. A very sensitive method for detection of (109)Cd, based on the use of a liquid scintillator, has been developed. From the graphical treatment of the equilibrium data, it has been deduced that CdL(2) is the complex extracted in the absence of 4-methylpyridine, and that the adduct CdL(2)B is extracted when the second ligand is present. This model has been checked by treating the data with the program LETAGROP-DISTR and the following equilibrium constants have been obtained: stability constants of CdL(2), log beta(1) = 2.82 +/- 0.14, log beta(2) = 5.981 +/- 0.004; distribution constant of CdL(2), log K(DC) = -0.49 +/- 0.01; adduct formation constant of CdL(2)B, log K(s) = 2.70 +/- 0.07.     

On the formation of iron(III) hydroxo acetate complexes

The formation of hydroxo acetate complexes of iron (III) ion has been studied at 25 degrees C in 3 M (Na)ClO4 ionic medium by measuring with a glass electrode the hydrogen ion concentration in Fe(ClO4)3-HClO4-NaAc mixtures (Ac = acetate ion). The acetate/metal ratio ranged from 0 to 6, the metal concentration varied from 0.005 to 0.06 M, whereas [H+] was stepwise decreased from 0.1 M to initial precipitation of hydroxo-acetates. This occurred, depending on the acetate/metal ratio, in the -log[H+] range 1.85-2.7. The potentiometric data are consistent with the presence of Fe3(OH)3Ac3(3+), Fe2(OH)2(4+), Fe3(OH)4(5+), Fe3(OH)5(4+) and, as minor species, of Fe3(OH)2Ac6+, FeAc2+, FeAc2+, FeOH2+ and Fe(OH)2+. Previously published EMF measurements with redox and glass half-cells were recalculated to refine the stability constants of FeAc2+, FeAc2+ and Fe3(OH)2Ac6+. Formation constants *beta pqr for pFe(3+)+(q-r)H2O + rHAc reversible Fep(OH)(q-r)(Ac)r3p-q + qH+ (in parenthesis the infinite dilution value): log*beta 111 = -1.85 +/- 0.02 (-0.67 +/- 0.15), log*beta 122 = -3.43 +/- 0.02 (-1.45 +/- 0.15); log*beta 363 = -5.66 +/- 0.03 (-2.85 +/- 0.40), log*beta 386 = -8.016 +/- 0.006 (-4.06 +/- 0.15), log*beta 220 = -2.88 +/- 0.02 (-2.84 +/- 0.05), log*beta 340 = -6.14 +/- 0.18 (-6.9 +/- 0.4), log*beta 350 = -8.44 +/- 0.09 (-7.65 +/- 0.15).     

Mononuclear cyano- and hydroxo-complexes of iron(III)

A detailed investigation of the iron(III)-cyanide and iron(III)-hydroxide systems has been made in NaClO(4) media at 25 degrees C, using combined UV-vis spectrophotometric and pH-potentiometric titrations. For the Fe(III)/OH- system, use of low total Fe(III) concentrations (< or =10 microM) and a wide pH range (0 < or = pH < or = 12.7) enabled detection of six mononuclear complexes, corresponding to the following equilibria: Fe3+(aq)+rH2O<=>Fe(OH)r(3-r)+(aq) + rH(+)(aq), where r = 1-6 with stability constants (log *beta 1r) of -2.66, -7.0, -12.5, -20.7, -30.8, and -43.4, respectively, at I = 1 M (NaClO(4)). It was also found to be possible to measure, for the first time, stability constants for most of the following equilibria: Fe3+(aq)+qCN-(aq)<=>Fe(CN)q(3-q)+(aq), despite a plethora of complicating factors. Values of log beta(1q) = 8.5, 15.8, 23.1, and 38.8 were obtained at I = 1.0 M (NaClO(4)) for q = 1-3 and 6, respectively. No reliable evidence could be obtained for the intermediate (q = 4 or 5) complexes. Similar results were obtained for both systems at I = 0.5 M(NaClO(4)). Spectra for the individual mononuclear complexes detected for Fe(III) with OH- and CN- are reported. Attempted measurements on the Fe(II)/CN- system were unsuccessful, but values of log beta(16)(Fe(CN)(6)(4-)) = 31.8 and log beta(15)(Fe(CN)(5)(3-) approximately 24 were estimated from well established electrode potential and other data.     

Effect of Pyridyl Donors in the Chelation of Aluminum(III), Gallium(III), and Indium(III)

A new preparation of N,N'-bis(2-pyridylmethyl)ethylenediamine-N,N'-diacetic acid (H(2)bped) is reported, and its properties of complexation with Al(III), Ga(III), In(III), and Co(III) are investigated. The molecular structure of the cobalt(III) complex [Co(bped)]PF(6).CH(3)CN.H(2)O (C(20)H(25)CoF(6)N(5)O(5)P) has been solved by X-ray methods; the complex crystallizes in the triclinic space group P&onemacr;, with a = 10.611(2) ?, b = 12.720(2) ?, c = 9.868(1) ?, alpha = 102.70(1) degrees, beta =93.60(1) degrees, gamma = 106.96(1) degrees, and Z = 2. The structure was solved by direct methods and was refined by full-matrix least-squares procedures to R = 0.041 (R(w) = 0.038) for 4312 reflections with I > 3sigma(I). The Co(III) ion is coordinated in a distorted octahedral geometry with an N(4)O(2) donor atom set. The carboxylato oxygen atoms are coordinated trans, while the pyridyl nitrogen atoms are coordinated cis. The largest distortion from octahedral geometry is the N(pyridyl)-Co-N(pyridyl) angle of 107 degrees. Complex formation constants have been measured at 25 degrees C (&mgr; = 0.16 M (NaCl)). log K([M(bped)](+)) (log K([M(bped)(OH)])): M = Al, 10.85 (6.37); M = Ga, 19.89 (15.62); M = In, 22.6 (15.44). A protonated complex was also detected, [Ga(Hbped)](2+), log K = 21.79. The order of stability is In(III) > Ga(III) > Al(III) for the binary species, [M(bped)](+). The solution structures of the complexes have been probed in multinuclear NMR ((1)H, (13)C, (27)Al) studies, and these solution structures are compared with the solid state structure of the cobalt(III) complex. The complexes [In(bped)](+) and [In(bped)(OH)] are proposed to contain 7-coordinate In(III) with water and hydroxide completing the respective coordination spheres. The gallium complexes are proposed to be 6-coordinate: the [Ga(Hbped)](2+) complex contains a nondeprotonated carboxylic acid group which is not coordinated, and [Ga(bped)(OH)] contains a coordinated hydroxide which displaces a carboxylato donor. The [Al(bped)(OH)] complex may be 5-coordinate on the basis of its downfield (27)Al NMR chemical shift, 54 ppm.     

The chemistry of iron in biosystems-V Study of complex formation between iron(III) and tartaric acid in alkaline aqueous solutions

Complex formation between Fe(III) and tartaric acid (H(2)L) has been studied in O.5M NaNO(3) medium at 25 degrees by potentiometry at pH 4.5-11. The following complex species and corresponding values of the stability constants (charges omitted) are proposed: 2Fe + 2L + 5H(2)O --> Fe(2)(OH)(5)L(2) + 5H(+); log* beta(-522) = 4.95 Fe + L + 3H(2)O --> Fe(OH)(3)L + 3H(+); log* beta(-311) = -1.55 Fe + L + 5H(2)O --> Fe(OH)(5)L + 5H(+); log* beta(-511) = -21.2 These results are in good agreement with those reported for this system in acid. The results may be presented as the degeneration of the "core + link" mechanism observed in the acidic zone. Structures are suggested for the complex species formed.     

The acidic constants of 2-hydroxybenzohydroxamic acid in NaClO4 solutions at 25 degrees C

The protolysis equilibria of 2-hydroxybenzohydroxamic acid, H2SAX, have been studied at 25 degrees C in different ionic media by potentiometric titration with a glass electrode. The media were 0.513, 1.05, 2.21 and 3.5 mol/kg NaClO4. The constants beta(-p)(H2SAX<==>H(2-p)SAX(-p)+pH+), combined with salting effects of NaClO4 on H2SAX deduced from solubility determinations, were processed by the specific interaction theory, SIT, to give equilibrium constants at infinite dilution, log beta(-1)(o) = -7.655 +/- 0.013 and log beta(-2)(o) = -17.94 +/- 0.04, as well as specific interaction coefficients b(HSAX-,Na+) = 0.12 +/- 0.01 and b(SAX2-,Na+) = 0.17 +/- 0.02, molal(-1).