Liquid-liquid extraction of ferric thiocyanate with hexamethyl phosphoramide: Direct spectrophotometric determination in the organic phase

Summary Application of hexamethylphosphoramide (HMPA) in the iron(III)-thiocyanate system gives a simple, sensitive and highly selective method for the spectrophotometric determination of Fe(III) in the organic phase (CHCl₃). The color is stable for more than 24 hours in CHCl₃. The system obeys Beer's law for 7g Fe/ml and the optimum concentration range is found to be 0.5–5g/ml. The molar absorptivity of 1.33×10⁴ l·mole^–1·cm^–1, and Sandell's sensitivity is 0.0044/cm² at 460 nm The composition of Fe(III) to thiocyanate is found to be 13 in the presence of HMPA in CHCl₃. The method is free from interferences of many anions and cations. The method has been used to determine iron in bauxite ore.

---

Flüssig-flüssig-Extraktion von Eisenrhodanid nach Zusatz von Hexatnethyl-pbosphoramid: Direkte spektrophotometrische Bestimmung in der organischen Phase

Zusammenfassung Der Zusatz von Hexamethylphosphoramid (HMPA) zu Eisen(III)-Thiocyanat führt zu einer einfachen, empfindlichen und sehr selektiven Methode der spektrophotometrischen Bestimmung von Fe(III) in organischer Phase (CHCl₃). Die Farbe bleibt in Chloroform mehr als 24 Stunden beständig. Das System entspricht dem Beerschen Gesetz unterhalb 7g Fe/ml. Das Konzentrationsoptimum liegt zwischen 0,5 und 5g/ml. Die molare Extinktion beträgt 1,33·10⁴ l·Mol^–1·cm^–1, die Empfindlichkeit nach Sandell 0,0044g/cm² bei 460 nm. Das Verhältnis Fe(III): Rhodanid in CHCl₃ ist 13 in Gegenwart von HMPA. Die Methode wird von vielen Anionen und Kationen nicht gestört. Sie wurde zur Bestimmung von Eisen in Bauxit verwendet.

     

Liquid-liquid extraction of osmium thiocyanate with hexamethylphosphoramide and direct spectrophotometric determination in the organic phase

The use of hexamethylphosphoramide (HMPA) in the osmium-thiocyanate system makes the method more sensitive and selective. The blue colour formed by osmium(VIII) with thiocyanate in 1.5M hydrochloric acid is intensified in the presence of HMPA and the complex becomes readily extractable into chloroform. The colour system has its absorption maximum at 595 nm and obeys Beer's law over the range 0.5-16 mug of Os per ml. The optimum range is 2-10 mug/ml. The molar absorptivity is 2.09 x 10(4)l.mole(-1).cm(-1). The method is simple, sensitive and free from interference from many metal ions, including ruthenium and other platinum metals.     

Liquid-liquid extraction of cobalt(II) thiocyanate with hexamethyl phosphoramide: Direct spectrophotometric determination in the organic phase

Summary Use of HMPA in Co(II) thiocyanate colour system gives a simple, sensitive and selective method for the determination of Co(II). Maximum colour intensity is attained in the acidity range of 0.15–0.75M HCl and thiocyanate concentration of 0.5–1.0M. The colour is completely extractable into chloroform, when 2 to 4 ml HMPA is used. The colour system shows maximum absorption at 610 nm. The Beer's law range is 2 to 52g Co/ml with optimum concentration range of 6–48g Co/ml. The molar absorptivity and sensitivity are 1.24 x 10³ l·mole^–1·cm^–1 and 0.047g Co/cm² respectively. The method has been applied to the determination of cobalt in steel.

---

Flüssig-flüssig-Extraktion von Kobalt(II)thiocyanat mit Hexamethylpbos-phoramid (HMPA) und spektrophotometrische Bestimmung in der organischen Phase

Zusammenfassung Auf der Grundlage der Farbreaktion von Kobalt(II)thiocyanat mit HMPA wurde eine einfache, empfindliche und selektive Methode zur Bestimmung von Co(II) entwickelt. Das Farbmaximum erhält man in 0,15–0,75M salzsaurer Lösung bei 0,5–1,0M Thiocyanat-Konzentration. Die Färbung ist mit Chloroform vollständig extrahierbar, wenn 2—4 ml HMPA verwendet werden. Die maximale Absorption liegt bei 610 nm. Der optimale Konzentrationsbereich liegt zwischen 6 und 48g Co/ml. Die molare Absorption beträgt 1,24 x l0³l·mole^–1·cm^–1, die Empfindlichkeit 0,047g Co/cm². Die Methode wurde zur Bestimmung von Kobalt in Stahl verwendet.

     

Liquid-liquid extraction of ruthenium(III) thiocyanate with hexamethylphosphoramide: Direct spectrophotometric determination in the organic phase

Summary Ru(III)-thiocyanate has been extracted with hexamethylphosphoramide (HMPA) in methyl isobutyl ketone (MIBK). Thus the extractability, sensitivity and selectivity are improved over the simple binary Ru(III) thiocyanate system in spectrophotometric determination of ruthenium in the organic phase. The maximum colour develops on the steam bath, at the acidity range of 1.5–2.5M with HCl and ammonium thiocyanate concentration range of 0.25–0.5M. The colour is completely extractable in MIBK when 1.5–3.0 ml HMPA is used and show maximum absorbance at 570 nm. The colour system obeys Beer's law for 0.7–13 g Ru/ml and the optimum concentration range is 2–13 g/ml. The molar absorptivity and sensitivity are 69401-mole^–1 cm^–1 and 0.0145 g/cm² respectively. The percent relative error is 2.72%. The method is very simple and does not require oxidation and subsequent distillation. The method can be applied in the presence of osmium.

---

Flüssig-flüssig-Extraktion von Ruthenium(III)thiocyanat mit Hexamethylpbosphoratnid: spektrophotometrische Bestimmung in der organischen Phase

Zusammenfassung Ru(III)thiocyanat wurde mit Hexamethylphosphoramid (HMPA) in Methylisobutylketon (MIBK) extrahiert. Die Extrahierbarkeit, Empfindlichkeit und Selektivität wurden im Vergleich zum binären Ru(III)-thiocyanatsystem durch spektrophotometrische Bestimmung in der organischen Phase verbessert. Das Farbmaximum entwickelt sich auf dem Wasserbad in 1,5 bis 2,5M Salzsäure bei einer Ammoniumthiocyanat-Konzentration von 0,25–0,5 Mol/l. Mit 1,5–3,0 ml HMPA läßt sich die Färbung vollständig in MIBK extrahieren und zeigt ein Absorptionsmaximum bei 570 nm. Die gefärbte Lösung entspricht dem Beerschen Gesetz für 0,7–13 g Ru/ml; das Konzentrationsoptimum liegt zwischen 2 und 13 g/ml Die molare Absorptivität und Empfindlichkeit betragen 69401·mol^–1·cm^–1 bzw. 0,0145g/cm². Die Methode ist sehr empfindlich; Oxydation und nachfolgende Destillation sind überflüssig. Bei Anwesenheit von Osmium ist dieses vorher zu entfernen.

     

Liquid-liquid extraction of zirconium with tri-n-butyl-acetohydroxamic acid and spectrophotometric determination in the organic phase with xylenol orange

Zirconium (6–121 μg) is determined with xylenol orange after liquid-liquid extraction by tri-n-butylacetohydroxamic acid (TBAH) from 6 M hydrochloric acid. Under optimal conditions (primarily, 1 1:1.5 ratio of TBAH to xylenol orange, addition of acetic acid, and measurement at 545 nm), the calibration is linear with a molar absorptivity of 34 650 l mol^?1 cm^?1. Ions which are not extracted by TBAH or donot form coloured complexes do not interfere; these include uranium and rare-earth elements. Hafnium interferes; interference from thorium is avoided by a preliminary extraction of zirconium with tri-n-octylamine.     

Liquid%liquid extraction of a rhenium%thiocyanate complex with hexamethylphosphoramide and direct spectrophotometric determination in the organic phase

A sensitive and selective method for the extraction of trace rhenium is based on extraction of a Re-thiocyanate complex with hexamethylphosphoramide and chloroform at an acidity of 2-3 M hydrochloric acid. Hydrazine sulphate is used as the reducing agent. The system obeys Beer's law at 430 nm, the optimum concentration range is 1.7-8 ppm. The molar absorptivity is calculated to be 2.23 x 10(4) 1.mole(-1) .cm(-1). The colour is stable for at least 48 hr. The method is simple and rapid and is generally free from interference by most of the metals commonly associated with rhenium.     

Liquid-liquid extraction and spectrophotometric determination of palladium with 2-mercaptobenz-amide

2-Mercaptobenzamide (MBA) was investigated as a reagent for the extraction of palladium. The palladium complex of MBA was extracted into tributyl phosphate (TBP). The pK_a of the ligand was 5.45 with the stability constant of the palladium complex β₂=10^7.1. The composition of the complex in TBP was Pd:MBA:TBP=1:2:2. Addition of sodium chloride accelerated the rate of extraction. Various interfering ions could be masked with EDTA; Ag(I), Au(III), Os(VIII), Se(IV), Te(IV) etc. interfered. The molar absorptivity was 1.59×10⁴ l mol^?1 cm^?1; 1–35 μg Pd could be determined at pH 6.0.     

Solid phase extraction and spectrophotometric determination of trace amounts of thiocyanate in real samples

A simple, selective and rapid method for solid phase extraction and spectrophotometric determination of thiocyanate using a manganese (III) tetrakis (p-sulfonatophenyl) porphyrin, [Mn (TPPS) OAC] bound to Amberlite IR-400 has been developed. The influence of pH, amount of solid phase, sample matrix, type and amount of eluting agent and flow rates i.e. variables affecting the efficiency of the extraction system were evaluated and conditions of the sample, eluting solution and active phase were optimized. The maximal capacity was found to be as 1.16 microg mL(-1) for 1200 mL. Thiocyanate ions can be eluted quantitatively with 8 mL 0.3 M ferric chloride. The enrichment factor was 150. The linear range of the determination is between 0.4-2.0 microg mL(-1) for preconcentration method with a limit of detection of 2.8 ng mL(-1). The method has been successfully applied for determination of trace amounts of thiocyanate in tap water, saliva sample and a synthetic mixture.     

Liquid-liquid extraction of cobalt thiocyanate with trhsooctylamine

Cobalt forms a coloured complex with triisooctylamine and thiocyanate in carbon tetrachloride. The green organic phase has maximum absorbancc at 627.5 mμ and Beer's law is obeyed in the range 0–10 mg Co. The molar extinction coefficient is 1895. The distribution coefficient at room temperature is 5.6. A composition of the coloured species is proposed.     

The extraction and determination of molybdenum as the thiocyanate complex

A method is presented for the determination of molybdenum by extraction of its thiocyanate complex with methyl isobutyl ketone. The method is accurate to ±4% or 3 μg of molybdenum, whichever is greater. The only elements which cause interference are rhenium (serious), platinum, palladium, rhodium, selenium and tellurium. The method has been applied to a number of standard samples with excellent results.     

Liquid-liquid extraction and spectrophotometric determination of cadmium with 1,10-phenanthroline and thymol blue

A simple and highly sensitive extraction spectrophotometric method was developed for the determination of traces of cadmium. The method is based on the preconcentrative extraction of ternary-ion-association complex of cadmium—1,10-phenanthroline-thymol blue into chloroform and subsequent determination by spectrophotometry. The ternary ion associate is stable for 20 h and cadmium content as low as 0.1 g in 90 ml of sample can be determined. The method is precise and has been applied to the determination of cadmium in sea water, solder and high purity zinc and indium materials.     

Spectrophotometric determination of molybdenum with thiocyanate after extraction of the tetraphenylarsonium and tetraphenylphosphonium complexes

Microchimica Acta - Spectrophotometric determination of molybdenum with thiocyanate by extraction of the tetraphenylarsonium and tetraphenylphosphonium ion-association complexes is described....     

1-（2′-苯并噻唑）-3-（4′-羧基苯）三氮烯固相萃取分光光度法测定钯

根据新试剂1-(2′-苯并噻唑)-3-(4′-羧基苯)三氮烯(BTCBT)与钯的显色反应及C8固相萃取小柱对显色络合物的固相萃取,建立了一种测定痕量钯的新方法,在pH为5.0~6.3的柠檬酸氢二钠-NaOH缓冲介质中,在乳化剂OP和SDBS存在下,钯与BTCBT发生反应形成1∶2的稳定络合物,该络合物可用C8固相萃取小柱富集,小柱上富集的络合物用乙醇洗脱后用分光光度法测定,在富集后的测定液中,络合物最大吸收波长为490 nm,摩尔吸光系数ε=1.16×105L.mol-1.cm-1,Pd2 量在0.1~1.2μg/mL内符合比尔定律,方法适用于测定催化剂中的钯。     

Spectrophotometric determination of molybdenum in rocks with thiocyanate

A rapid procedure for the determination of microgram amounts of molybdenum in rocks is described. After acid decomposition, molybdenum is extracted from a hydrochloric acid solution into xylene with tributyl phosphate. After back-extraction with water, molybdenum is extracted as the α-benzoinoximate into chloroform, stripped into hydrochloric acid extracted as the thiocyanate into amyl alcohol, and determined spectrophotometrically. The molybdenum thiocyanate color produced is stable, sensitive, and reproducible. Results of analyses of several of the U.S. Geological Survey standard rocks are given.     

Liquid-liquid extraction and spectrophotometric determination of uranium with n-phenyl-3-styrylacrylohydroxamic acid (PSAHA)

A rapid, selective and sensitive liquid-liquid extraction and spectrophotometric method for the separation and microgram determination of uranium using PSAHA is described. Uranium is extracted with PSAHA into chloroform at pH 6.0–6.8. The U-PSAHA chelate is orange red in color having maximum absorbance at 410 nm and molar absorptivity 1.2·10⁴l·mol^–1·cm^–1. The system obeys Beer's Law in the range of 1.2 to 22.00 ppm of uranium. The uranium is determined in sea water and rock samples.     

Liquid-liquid extraction procedure exploiting multicommutation in flow system for the determination of molybdenum in plants

A liquid-liquid extraction flow analysis procedure for the spectrophotometric determination of molybdenum in plants at μg l⁻¹ level is described. The flow network comprised a set of solenoid valves assembled to implement the multicommutation approach under microcomputer control. Radiation source (LED, 475 nm), detector (photodiode) and separation chamber were nested together with the flow cell comprising a compact unit. The consumption of reagents (potassium thiocyanate and stannous chloride) and also extracting solvent (isoamyl alcohol) were optimized to 32 mg and 200 μl per determination, respectively. Accuracy was assessed by comparing results with those obtained with ICP-OES and no significant difference at 95% confidence level was observed. Other favorable characteristics such as a linear response ranging from 25 to 150 μg l⁻¹ molybdenum (r=0.999); detection limit of 4.6 μg l⁻¹ sample throughput of 25 determinations per hour and relative standard deviation of 2.5% (n=10) were also achieved.     

Colorimetric determination of molybdenum by the reaction with thiocyanate

Summary A new method for the photometric determination of micro quantities of molybdenum through the thiocyanate method has been developed. The reduction of Mo VI to Mo V is achieved by photochemical reaction at 2 N acidity without the addition of an extraneous reducing agent. The coloured complex is stable for about 36 hrs. in 2.0N acid concentration. The method is accurate to about ±1.0% and Beer's Law is obeyed within the limits of 0 to 100 g.

---

Zusammenfassung Ein Verfahren zur photometrischen Bestimmung von Mikromengen MolybdÄn mit der Thiocyanatmethode wird beschrieben. Die Reduktion von Mo^VI zu Mo^V wird durch photochemische Reaktion in 2 n saurem Medium ohne Zusatz eines weiteren Reduktionsmittels erreicht. In diesem SÄuremedium ist der Farbkomplex etwa 36 Std lang stabil. Die erhaltenen Werte sind auf ±1,0% genau und das Beersche Gesetz wird von 0–100 g befolgt.

     

对磺酸基苯亚甲基若丹宁固相萃取光度法测定水中的汞

研究了对磺酸基苯基亚甲基若丹宁(SBDR)与汞的显色反应,在pH4.0的HAc NaAc缓冲介质中,吐温 80存在下,SBDR与汞反应生成2∶1稳定络合物,该络合物可被WatersPorapak Sep Park C18固相萃取小柱萃取,用乙醇洗脱后在乙醇介质中λmax=520nm,可用分光光度法测定,体系ε=1.16×105L/mol·cm。汞含量在0μg/mL～1.5μg/mL内符合比尔定律,方法可用于水样中汞含量的测定。