AROMATIC AND HETEROCYCLIC NITRILES AND THEIR POLYMERS ⅩⅧ. THE POLYMERIZATION KINETICS OF BENZONITRILE CATALYZED BY METAL ACETYLACETONATE

The bulk polymerization of benzonitrile catalyzed by Co(Ⅱ), Co(Ⅲ) and Fe(Ⅲ) acetylacetonate was studied. The results of kinetics study show that the rate of polymerization was proportional to first power of the concentration of catalyst and second power of the concentration of monomer.     

THE AROMATIC AND HETEROCYCLIC DINITRILES AND THEIR POLYMERS. Ⅸ. THE POLYMERIZATION KINETICS OF 4, 4''-BIPHENYLDICARBONITRILE*

The polymerization kinetics of 4,4'-biphenyldicarbonitrile catalyzed by complex of 4,4'-biphenyl-dicarbonitrile with ZnCl_2 was studied. The cyano group concentration was measured by infrared spectroscopic analysis using potassium ferricyanide as the internal reference. The results proved that the polymerization is a second order reaction, and the activation energy of polymerization is 12.4 kcal/mol. The polymerization rates of 4,4'-biphenyldicarbonitrile catalyzed by other seven complexes were also measured. The polymerization mechanism was discussed.     

AROMATIC AND HETEROCYCLIC DINITRILES AND THEIR POLYMERS ⅪⅤ. STUDY ON THE CATALYSTS OF THE POLYMERIZATION OF AROMATIC NITRILES*

Various catalysts for the polymerization ot aromatic nitriles were investigated. It was found that Lewis acid-metal is a preferable catalyst system for the polymerization of aromatic nitriles, and the polymerization rate is about 10 times faster than Lewis acid alone. The polymerization rate of benzonitrile catalyzed by Lewis acid and different metals was measured, and the activity of metals was in the following decreasing order ,magnesium, zinc, sodium, calcium. Furthermore, the polymerization of benzonitrile catalyzed by different Lewis acid and zinc was also investigated.     

AROMATIC AND HETEROCYCLIC DINITRILES AND THEIR POLYMERS ⅩⅢ. POLYMERIZATION KINETICS OF BENZONITRILE AND THE STRUCTURE OF PRODUCTS

The polymerization kinetics of benzonitrile were studied, and the formation rate constants of s-triazine structure and linear polymer were determined. The influence of polymerization temperature and the amount of zinc chloride as catalyst on the ratio of linear to cyclic structure were also investigated, and the obtained results were discussed.     

AROMATIC AND HETEROCYCLIC DINITRILES AND THEIR POLYMERS. Ⅺ. STUDY ON THE POLYMERIZATION OF AROMATIC AND HETEROCYCLIC DINITRILES BY INFRARED SPECTROSCOPY*

The polymerization rates of fourteen aromatic and heterocyclic dinitriles were measured by infraredspectroscopy and compared with that of 4, 4′-biphenyldicarbonitrile. The rate is greatly enhancedwhen an electron withdrawing group is substituted at the para position of cyano group in aromaticdinitriles. The polymerization rates of heterocyclic dinitriles wer discussed in terms of π-lectrondensity of the heterocyclic rings.     

AROMATIC AND HETEROCYCLIC NITRILES AND THEIR POLYMERS XIX:THE POLYMERIZATION OF SUBSTITUTED BENZONITRILES CATALYZED BY COBALTIC ACETYLACETONATE

The polymerization kinetics of 4, 4'-biphenyldicarbonitrile and other substituted ben-zonitriles catalyzed by cobaltic acetylacetonate was studied. The structure of polymer ofdifferent substituted benzonitrile was also determined. It is found that the rate of polymeri-zation and the structure of polymer is greatly affected by the substituent of benzonitriles.     

AROMATIC AND HETEROCYCLIC NITRILES AND THEIR POLYMERS ⅩⅥ. THE POLYMERIZATION KINETICS OF 4, 4′-BIPHENYLDICARBONITRILE CATALYZED BY LEWIS ACID-METAL SYSTEM

The polymerization kinetics of 4, 4′-biphenyldicarbonitrile using cuprous chloride-zinc system as catatyst was investigated. the concentration of unreacted cyano group was measured by infrared spectroscopic analysis using potassium ferricyanide as the internal reference. It was found that the polymerization rate is directly proportional to the concentrations ofcyano group, cuprous chloride and zinc, and the activation energy of the polymerization is as Tow as 18.4 KJ/mol. In addition, the other kinetics parameters were obtained and discussed.     

THE POLYMERIZATION OF AROMATIC AND HETEROCYCLIC DINITRILES

This review is a concise survey about the works in our laboratory on the polymerization of aromatic and heterocyclic dinitriles, including the polymerization kinetics and mechanism, synthesis of heterocyclic dinitriles, the structure of polymers, and the correlation between the structures of dinitriles and polymerization rates and thermal performances of Polymers.     

POLYMERIZATION OF OCTAFLUOROCYCLOBUTANE IN GLOW DISCHARGE Ⅱ. ESCA AND IR CHARACTERIZATION OF POLYMER STRUCTURE*

In a capacitively coupled discharge with external electrodes, He, H_2, N_2 or Ar were used as plasmagas, polymerization of octafluorocyclobutane was carried out under different conditions by varyingdischarge power, pressure, plasma gas and plasma-gas/monomer ratio. Structure of polymerizedproducts was characterized by IR spectroscopy and ESCA measurement. It was found that therewere six elements in the products, i.e. C, F, Si, O, N and H. The probably existed groups in poly-mers wer investigated. By analyzing the resolved peaks of C_(1S) region in ESCA spectra, effect of thereaction conditions on degree of branching of the polymerized products and the relationship of thepolymer structure wth the mechanism of the competitive ablation and polymerization process werestudied. In addition, polymer deposition process occurring in glow discharge was discussed.     

SYNTHESIS AND CHARACTERIZATION OF COMB-LIKE POLYMERS BEARING HETEROCYCLIC AZO GROUP AND MESOGENIC GROUP

The synthesis and characterization of a series of novel comb-like polymethacrylates bearingheterocyclic azo group and mesogenic group are described. The thermal properties of the polymers such asthermal stability and phase transition behavior were investigated by thermogravimetric analysis, differentialthermal analysis and polarizing optical microscopy techniques. The experimental results show that all thesynthesized polymers do not exhibit liquid crystallinity except the homopolymer of the mesogenic monomerMAPB2 and the glass transition temperatures of the polymers increase with increasing content of azo moietyin polymers linearly.     

CHARACTERIZATION OF SOME SCHIFF BASES OF HETEROCYCLIC COMPOUNDS AND THEIR TRANSITION METAL COMPLEXES

Some new Schiff bases were synthesized by the condensation ofequimolar quantities of salicylaldehyde and 2-amino-5-phenylazo-pyridine orits derivatives in dry benzene(1):Metal complexes of the type ML_2and M'L_3where M=Cu~(2+),Co~(2+),Ni~(2+),Mn~(2+)Pd~(2+),M'=Fe~(3+)and L=different newly synthesizedmonobasic Schiff bases were prepared in absolute ethanolic medium(2)andcharacterized by elementary analysis,conductance measurements,infraredspectra,electronic spectra,magnetic moments studies.     

STUDY OF HETEROCYCLIC POLYMER COMPLEXES Ⅰ. POLYPHENYLQUINOXALINE-PLATINUM AND RHODIUM COMPLEXES*

Two new polyphenylquinoxaline-platinum and rhodium complexes were synthesized and iden-tified by X-ray photoelectron spectroscopy. Their catalytic properties on hydrosilylation and hy-drogenation of olefines have been investigated. It was found that these polymer complexes possessedhigh selective catalytic activities, and were easily recoverable after each reaction and could berepeatedly used for more than 10 times while maintaining the same effectiveness.     

RESEARCH ON THE POLYCONDENSATION KINETICS OF ω-AMINO-ACIDS*

In our previous report, it was discovered that the polycondensation of 9-amino-nonanoic acid follows second order from the beginning up to the extent of reaction, p, around 99%, and after which the reaction changes rapidly to third order. In this paper, we wish to report that this change of the reaction order from second to third occurred also in the polycondensation of 6-aminocaproic acid and 11-amino-undecanoic acid. The transition region lay again at p around 99%. It may be concluded that this is a general rule in the polycondensation of the ω-amino-acids (monomers of the A—B type), and the controversial results that appeared in the literature may be cleared up by our experiments.     

THE SYNTHESIS OF URUSHIOL TITANIUM CHELATE POLYMERS AND THEIR STRUCTURAL CHARACTERISTICS

The synthetic method and structural characteristics of urushiol-titanium chelates (UT) and urushiol-titanium chelate polymer for anticorrosive coatings have been studied.Two kinds of coating films made from UT polymer show excellent physico-mechanical properties and possess good chemical resistance to strong acids and alkalis, many kinds of salt solutions and organic solvents, stable at high temperature.     

THE EFFECT OF POLAR ADDITIVES ON THE γ RADIATION INDUCED POLYMERIZATION OF STYRENE*

The γ induced polymerization of styrene in the presence of polar additives such as tributylphosphate, triethyl amine and ethanol was studied at dose rate of 5.0×10~(17) eV/ml. min. The re-sult shows that radiation induced polymerization of styrene was sensitized by the three kinds ofadditives at the approximate same rate and the experimental results were in agreement with thetheoretical calculation of WAS equation. The cause of sensitization is due to the proton transfer.     

CHARACTERIZATION OF γ-IRRADIATED CRYSTALLINE POLYMERS Ⅰ. CHARACTERIZATION OF γ-RADIATION INDUCED CROSSLINKED POLYAMIDE 1010 BY CRYSTALLIZATION TEMPERATURE*

The effect of ~(50)Co γ-radiation on plain polyamide 1010 (PA1010 Ⅰ) and PA1010 containing dif-ferent amount of crosslinking agent (BMI) (PA1010 Ⅱ) both in vacuum and in air at room tempera-ture was investigated with DSC. It was found that the crystallization temperature T_c of crosslinkedsample determined with DSC at constant cooling rate decreased as the radiation dose increased. Thedifference between crystallization temperatures before and after crosslinking (T_(c_o)-T_(c_R) is linearlyrelated to the radiation dose for PA1010I. Based on the Charlesby-Pinner's equation an expressionwas derived S+S~(1/2)=A+B/(T_(c_o)-T_(c_R)) where S is the sol fraction, A and B are constants. Since thereis evidence that T_c is relative to S only and independent of the way of irradiation, the equation is alsoapplicable to the enhanced γ-irradiation crosslinked PA1010 Ⅱ. Therefore, determination of T_cof crosslinked polymer by DSC offers a convenient approach to study quantitatively the random andespecially non-random crosslinking reaction of crystalline polymer.     

SYNTHESIS AND CHARACTERIZATION OF LIQUID CRYSTAL POLYMERS WITH T-SHAPED TWO-DIMENSIONAL MESOGENIC UNITS (Ⅱ)*

A series of liquid crystalline polymers with T-shaped two-dimensional mesogenic unitswere synthesized via low temperature solution polycondensation of 2-(4'-alkoxy-phenyl)hydroquinone with various diacyl dichlorides. The polymers were found to be nematic andshown thermotropic liquid crystalline behaviors through observations using DSC, polarizedmicroscopy and X-ray diffraction. The melting temperature T_m and the isotropizationtemperature T_i of the polymers change regularly with varying of the monomer structures.     

STUDIES ON THE POLYMERIZATION OF β-CYCLODEXTRIN WITH EPICHLOROHYDRIN*

Different proportions of β-cydodextrin and epichlorohydrin were used to prepare a group of β-cyclodextrin polymers. The relationship between the reaction extent and the molar ratios of reactants was discussed according to the results of ~1H-NMR, ~(13) C-NMR spectra and elemental analysis. Especially, high resolution ~1H-NMR spectra were usd for studying the reaction active sites and the extent of reaction. The solubility of oil soluble drugs in water was largely improved in the presence of water-soluble β-cyclodextrin polymer.     

THE POLYMERIZATION OF d-ELEOSTEARIC ACID IN THE DIPALMITOYLPHOSPHATIDYLCHOLINE-α-ELEOSTEARIC ACID LIPOSOME*

The polymerization of α-eleostearic acid (α-ESA) in the dipalmitoylphosphatidylcholine (DPPC)-α-ESA liposome was studied. The polymerization was carried out by UV irradiation and was kineticfirst order. The rate constant depends on the ratio of DPPC to α-ESA in the liposome. A transitionpoint of reaction rate could be observed in the course of the polymerization, and it appearedearlier with elevated temperature. Before the transition point, the higher the DPPC to α-ESAratio the higher was the reaction rate; while after the transition point, the higher the DPPC to α-ESAratio the lower wa the reaction rate.