聚丙烯酰胺/玄武岩纤维复合水凝胶的制备及性能

近年来,玄武岩纤维因其高强度、耐高温、优良的耐候性以及良好配伍性等优势,近年来被尝试用于改性PAM水凝胶体系以提升其力学性能。然而,现有改性方法易于受到外界长时间作用力的破坏,从而严重影响水凝胶功能的发挥。为解决这一问题,通过γ-甲基丙烯酰氧基丙基三甲氧基硅烷(TMSPMA)与玄武岩纤维(BF)反应,制备含双键修饰的BF(BF-TMSPMA)。将丙烯酰胺(AM)与BF-TMSPMA混合后进行反应,制备BF改性的聚丙烯酰胺复合水凝胶(PAM/BF-TMSPMA)。BF-TMSPMA改性后,复合水凝胶的力学性能得到明显提高。当BF-TMSPMA浓度为1mg·mL^-1时,复合水凝胶拉伸强度为40.1±5.4 kPa,为PAM水凝胶的12.8倍;复合水凝胶断裂伸长率为2700.2%±25.8%,为PAM水凝胶的5.4倍;复合水凝胶杨氏模量为45.8±3.4 kPa,为PAM水凝胶的12.7倍;复合水凝胶韧性为450.4±14.8 kJ·m^-3,为PAM水凝胶的30.6倍。复合水凝胶也具有良好的自修复性能,切断的水凝胶自修复后断裂伸长率达2217.2%...     

P(HEMA-co-AM)胶体晶体膜的制备及其性能

将聚苯乙烯胶体晶体嵌入丙烯酰胺(AM)与甲基丙烯酸羟乙酯(HEMA)的交联共聚膜中,制备了共聚物P(AM-co-HEMA)胶体晶体膜.研究了单体配比及交联剂N,N'-亚甲基双(丙烯酰胺)(MBA)对胶体晶体膜的光子带隙峰位置、拉伸强度和断裂伸长率的影响.结果表明:当n(HEMA)/n(AM)≤2.33时,光子带隙峰较明...     

化学-物理法制备聚乙烯醇/壳聚糖/纳米羟基磷灰石复合水凝胶及其性能

采用化学-物理交联法制备了聚乙烯醇/壳聚糖/纳米羟基磷灰石(PVA/CS/n-HA)复合水凝胶材料。通过对比其含水率、拉伸强度、红外光谱和TG谱图,探讨了PVA含量及戊二醛加入量对材料性能的影响。结果表明,m(PVA)∶m(CS+n-HA)=5∶1,戊二醛质量分数为2%时,复合水凝胶材料具有较好的综合性能:含水率为82.0%、拉伸强度为2.14 MPa、断裂伸长率为343.26%;同步热分析表明,25~140℃,仅存在水分的蒸发,直至360℃材料才发生分解,说明材料的热稳定性良好;红外分析表明,CS与戊二醛发生了交联反应。     

单宁作为共引发剂和交联剂制备高伸长率水凝胶

以过硫酸铵为引发剂(APS)、杨梅综合单宁(TA)作为共引发剂和交联剂,通过自由基聚合制备了高伸长率水凝胶(TIC-gel)。通过红外光谱(FT-IR)、核磁共振(~1 H-NMR)和浸泡尿素的方法研究了TA在TIC-gel中形成化学交联的机理。通过拉伸、压缩测试和流变学测试系统地分析了TIC-gel的力学性能和影响因素。结果表明:相比于传统化学交联水凝胶(PAM-MBA-gel),利用TA制备的凝胶具有高伸长率(2 250%)和高韧性(3.51 MJ/m3)。利用这一新的形成交联的方法所得的凝胶即使在高浓度时也能形成均匀的结构,可以很好地分散应力,为TIC-gel的高伸长率作出贡献。     

k-型卡拉胶/聚乙烯吡咯烷酮共混水凝胶的辐射制备及性质研究

采用辐射技术制备了κ-型卡拉胶(KC)/聚乙烯基吡咯烷酮(PVP)共混水凝胶,研究了共混凝胶内KC含量、PVP的分子量和辐照剂量等对KC/PVP共混水凝胶性质的影响.实验发现,KC与高分子量的PVP(k-90)共混后在一定剂量范围内辐照可得到高强度、高溶胀行为的KC/PVP共混水凝胶,随着共混凝胶内KC含量的增加,凝胶强度及溶胀性能均显著提高.分析表明,KC与高分子量的PVP共混后,在较低剂量下KC的降解被抑制,从而获得一种由物理交联的KC和化学交联的PVP形成的互穿网络(IPN)凝胶.     

超大孔P(AA-co-AM)/PVA水凝胶的制备及吸附性能研究

采用泡沫分散聚合法,以饱和Na2CO3水溶液为发泡剂,过硫酸铵(APS)及NaHSO3为引发剂,N,N′-亚甲基双丙烯酰胺(MBA)为交联剂,聚(氧化乙烯/氧化丙烯)(PF127)为泡沫稳定剂,丙烯酸(AA)和丙烯酰胺(AM)为单体,聚乙烯醇(PVA)为第二网络,制备超大孔半互穿水凝胶P(AA-co-AM)/PVA,并研究其对阳离子兰染料的吸附性能。研究表明,P(AA-co-AM)/PVA具有相互贯穿的超大孔结构;当n(AM):n(AA)=1.5:1,w(PVA)=1.6%时凝胶的平衡溶胀度达186.56g/g;凝胶具有很好的离子响应性,在蒸馏水中的平衡溶胀度为129.16g/g时,在0.1mol/L NaCl溶液中只有31.07g/g;对阳离子兰染料溶液的脱色率达92.17%,吸附容量达17.16mg/g。     

静电纺空气过滤用PET/CTS抗菌复合纳米纤维膜的制备

采用静电纺丝法制备PET/CTS复合纳米纤维膜,并在纤维膜表面吸附一层纳米银,进一步增加纤维膜的抗菌性能.以扫描电镜(SEM)对不同配比PET/CTS所制备的纤维膜的微观形貌进行表征,结果显示w(CTS)/w(PET)为12.5%时,纤维形貌较好,平均直径为405 nm.分别对不同厚度的PET/CTS纤维膜进行力学性能、透气性能以及空气过滤性能测试,结果表明纺丝时间为7 h时,纤维膜具有较好的性能,其弹性模量为48.15 MPa、断裂伸长率183.30%、拉伸断裂应力2.11 MPa、拉伸强度2.49 MPa、拉伸屈服应力1.23 MPa、最大力1.38 N,阻气值为3.99 k Pa·S/m,过滤效率为99.55%,压降为621.32 Pa.吸附银离子实验表明,最佳GA交联浴配比为GA(vol%)=3.5%.紫外可见光谱(UV)及透射电镜(TEM)表征证明,有10 nm左右纳米银生成.抑菌实验表明,载银PET/CTS复合纳米纤维膜对金黄色葡萄球菌(S.a.)和大肠杆菌(E.coli.)的杀菌率分别为99.97%和99.99%.     

聚乙二醇对PAMPS/PAM双网络水凝胶性能的影响

采用紫外光引发聚合制备了聚乙二醇(PEG)改性的聚(2-丙烯酰胺-2-甲基丙磺酸)/聚丙烯酰胺(PAMPS/PAM)双网络水凝胶.测定并比较了PEG改性前后双网络水凝胶的溶胀动力学以及单网络水凝胶中丙烯酰胺(AM)的吸收量;用扫描电子显微镜(SEM)观察了单网络水凝胶的结构;测定PEG改性前后双网络水凝胶的压缩及拉伸性能.结果表明,经PEG改性后的双网络水凝胶有较高的溶胀比;改性后单网络水凝胶更易吸收AM;改性后双网络水凝胶压缩形变率达到90%以上、拉伸形变率是未改性双网络水凝胶的2倍.     

化学-物理法制备聚乙烯醇/壳聚糖/纳米羟基磷灰石复合水凝胶及其性能

采用化学 物理交联法制备了聚乙烯醇/壳聚糖/纳米羟基磷灰石（PVA/CS/n-HA）复合水凝胶材料。 通过对比其含水率、拉伸强度、红外光谱和TG谱图,探讨了PVA含量及戊二醛加入量对材料性能的影响。 结果表明,m(PVA)∶m（CS+n-HA）=5∶1,戊二醛质量分数为2%时,复合水凝胶材料具有较好的综合性能：含水率为82.0%、拉伸强度为2.14 MPa、断裂伸长率为343.26%;同步热分析表明,25~140 ℃,仅存在水分的蒸发,直至360 ℃材料才发生分解,说明材料的热稳定性良好;红外分析表明,CS与戊二醛发生了交联反应。     

羧甲基纤维素钠/聚(N-异丙基丙烯酰胺)纳米复合水凝胶的制备及结构性能表征

以无机粘土为交联剂制备了具有温度、pH双重敏感特性的羧甲基纤维素钠/聚(N-异丙基丙烯酰胺)/粘土半互穿网络纳米复合水凝胶(CMC/PNIPA/Clay semi-IPN),并通过红外和透射电镜对其结构和形态进行了表征。在酸性(pH=1.2)和20℃条件下,分别研究了温度和不同pH缓冲液对该凝胶溶胀度的影响,测定了复合水凝胶的力学性能。结果表明:水凝胶中的粘土被剥离成单片层,且均匀分散在凝胶网络中,起交联剂的作用,而CMC以线性大分子的形态存在;CMC/PNIPA/Clay具有良好的温度、pH双重敏感特性;凝胶的断裂伸长率>1 000%。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.