掺杂态聚苯胺的性能及其防腐应用研究进展

聚苯胺具有良好的导电性和独特的掺杂-解掺杂特性,成为近年来备受关注的导电高分子材料,其特有的抗划伤、抗点蚀和钝化性能使其在金属防腐领域拥有巨大的应用前景。聚苯胺结构中苯环的存在,使得其分子链具有较大刚性,而分子间氢键又导致其难溶、难熔、可加工性能较差,严重制约了聚苯胺的应用。掺杂过程能有效改善聚苯胺的某些性能,或赋予其新的功能,扩展聚苯胺的应用。本文综述了聚苯胺的掺杂方式、掺杂机理、聚苯胺防腐材料的制备方法,以及其在金属防腐领域的应用,展望了聚苯胺的研究和应用前景。     

改性聚苯胺及其衍生物涂层的防腐性能

导电聚合物作为一种新型高分子材料,由于具有可逆的氧化还原特性,在金属腐蚀防护领域具有潜在的应用前景。在众多的导电聚合物中,聚苯胺因其具有独特的抗点蚀、抗划伤和防止海洋生物附着等特殊性能,被广泛应用于金属材料、化学工业和航海航天等领域, 逐渐成为防腐涂料领域的研究热点。本文通过对单一聚苯胺涂层防腐性能不足的分析,系统总结了近年来改性聚苯胺涂层在金属腐蚀防护领域的研究进展,包括单一环取代聚苯胺涂层和N取代聚苯胺涂层、改性聚苯胺复合涂层和改性聚苯胺复合材料/树脂共混复合涂层;通过各种腐蚀测试手段比较了改性聚苯胺涂层与未改性聚苯胺涂层之间防腐性能的优劣,进一步证明了供电子取代基（如烷基、烷氧基和氨基等）能够提高聚苯胺涂层的防腐性能,复合改性或与树脂共混也能够提高聚苯胺及其衍生物涂层的防腐性能;同时展望了聚苯胺及其衍生物涂料未来发展的新趋势。     

聚苯胺防腐涂料研究进展

综述了聚苯胺防腐涂料研究进展;浅析了聚苯胺涂料独特的防腐机理,概述了其防腐应用;指出导电聚苯胺具有可逆的氧化还原特性,对金属具有优良的防腐性能,作为新一代无毒无污染的防腐材料而逐渐成为当前防腐蚀领域的一大热点;并就聚苯胺涂料的防腐发展方向进行了展望.     

聚苯胺水性涂料的制备及其防腐性能

将有机磷酸(乙二醇单甲醚磷酸酯和乙二醇单甲醚磷酸二酯混合物)（OP）掺杂得到的导电聚苯胺（PANI-OP）加入到水性环氧树脂（WER）中,制备了聚苯胺水性防腐涂料,并且研究了其防腐蚀性能和防腐蚀机理。 透射电子显微镜观察表明,导电聚苯胺质量分数为0.1%时,其粒径分布范围为50~100 nm。 电化学阻抗谱以及开路电压的变化表明,聚苯胺的存在显著提高了涂层的防腐效果。 金属基底光电子能谱结果表明,聚苯胺水性涂料良好的防腐性能缘于在金属表面生成了致密的氧化物膜以及掺杂剂离子与溶解金属生成了不溶性的盐。     

基于可分散聚苯胺的紫外光固化防腐涂料的研究

采用酸性磷酸酯作为掺杂剂对本征态聚苯胺(EB)进行掺杂,制备了可在聚氨酯丙烯酸酯中进行纳米分散的导电聚苯胺(ES),其分散粒径分布为60~765 nm之间,进而制备了不含重金属的紫外光固化聚苯胺防腐涂料.随着体系中导电聚苯胺含量从0.5 wt%增大5.0 wt%,粒径从60~100 nm增加到190~765 nm.导电聚苯胺含量增大,导致了ES发生团聚,从而粒径增大,进而降低防腐涂层的致密性.当ES含量为1.0wt%时,粒径在110~180 nm之间,防腐涂层在3.5 wt%的Na Cl水溶液中浸泡2400 h后,其0.1 Hz下的绝对阻抗值(|Z|_(0.1 Hz))仍高于1.0×10~8Ωcm~2,同时45~50μm的防腐涂层在划叉中性盐雾试验中,500 h内没有出现起泡现象,且锈蚀宽度小于1 mm,表现出优异的防腐性能.     

我国导电聚苯胺材料研发获系列创新成果

中科院长春应化所和吉林正基科技开发有限责任公司的科技人员经过4年努力，在导电聚苯胺材料的研发方面获得了系列创新成果：在国内建立了第1条年产百吨的导电聚苯胺原料生产线、第1条年产千吨的导电聚苯胺涂料生产线；率先在国内研发出具有我国自主知识产权的聚苯胺防腐涂料、聚苯胺防腐油脂、聚苯胺防腐密封胶、聚苯胺防冻液防腐添加剂等系列高附加值聚苯胺下游产品。     

聚苯胺纳米复合材料的优良性能

聚苯胺纳米复合材料因结合了聚苯胺和纳米粒子的特殊性能,从而改善了基体的物理化学性能,赋予了材料前所未有的独特的性能,成为目前研究最为广泛的导电高分子纳米复合材料之一.本文基于国内外最新研究文献,结合典型事列详细综述了聚苯胺纳米复合材料在生物传感、催化、电磁、微波吸收和光电等方面呈现出的独特性能,简单评述了其在生物传感、催化、电磁、微波吸收、防腐等领域的应用前景.     

聚苯胺在防腐领域的应用

综述导电聚苯胺用于金属防腐蚀领域的最新进展,并且探讨了其相关的防腐机理。     

基于聚苯胺微胶囊的双重自修复防腐涂层

将乳液模板法、光聚合法以及苯胺的界面聚合相结合制备了负载亚麻籽油的聚苯胺微胶囊,并将微胶囊与水性环氧树脂涂层相结合来构筑了具有优异光热转化能力的双重自修复防腐涂层.当涂层受损后,微胶囊中的自修复剂亚麻籽油释放出来,对涂层进行修复;在近红外光(NIR)的照射下,聚苯胺可以有效地吸收光能并将其转化为热能,使涂层的温度高于其玻璃化转变温度,涂层破损处实现愈合.聚苯胺微胶囊的加入不仅赋予涂层优异的自修复能力,而且大大增强了其防腐能力.涂层的表面形貌、电化学与盐雾测试结果表明,聚苯胺微胶囊添加量为10%的涂层在NIR照射3 s内,可以实现快速闭合,恢复了其阻隔性能.此外,在300 h的盐雾测试后,涂层未产生任何的腐蚀产物,而纯涂层可以明显看到腐蚀现象.这种双重自修复防腐涂层的超快响应时间和高愈合效率以及优异的防腐性能具有潜在的应用价值.     

紫外光-热双固化聚苯胺防腐涂料

以酸性磷酸酯为掺杂剂对本征态聚苯胺(EB)进行掺杂,制备了可在聚氨酯和聚氨酯丙烯酸酯中进行纳米分散的导电聚苯胺(ES),其粒径分布在80~750 nm之间可控。 在此基础上,制备了不含重金属的紫外光-热双固化聚苯胺防腐涂料。 该防腐涂料先后经过3~5 s紫外光固化和80 ℃下1~3 min的热固化,即可完成紫外光-热双固化过程。 由于ES与聚氨酯或聚氨酯丙烯酸酯之间是不相容体系,因此随着ES质量分数的增大,会导致ES的团聚,分散粒径增大。 当ES质量分数从1.0%增大到5.0%时,ES的粒径从80~119 nm增加到500~750 nm。 ES的分散粒径增大会导致防腐涂层的致密性变差,降低防腐效果。 与普通紫外光固化聚苯胺防腐涂层相比,当ES为1.0%时,紫外光-热双固化防腐涂层在质量分数为3.5%的NaCl水溶液中浸泡2160 h后,其0.1 Hz下的绝对阻抗值(|Z|_{0.1 Hz})仍高于1.0×10⁸ Ω·cm²,优于普通紫外光固化聚苯胺防腐涂层的|Z|_{0.1 Hz}(1.0×10⁷ Ω·cm²),表明紫外光-热双固化涂层的防腐效果有了显著改善。 经过500 h划叉中性盐雾试验后,普通紫外光固化防腐涂层的板面出现了锈蚀宽度小于1 mm的锈蚀,而紫外光-热双固化防腐涂层经过500 h划叉中性盐雾试验,板面没有出现生锈、起泡的现象,表明紫外光-热双固化路线对提高涂层的防腐性能具有较大的价值。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.