Analysis of spectral properties of acoustic noise produced during magnetic resonance imaging

Magnetic resonance imaging (MRI) technique enables non-invasive analysis of the human vocal tract during phonation. Creation of MR images of the vocal tract is accompanied by simultaneous recording of the produced speech. The paper analyzes and compares spectral properties of an acoustical noise produced by mechanical vibration of the gradient coils during scanning in the open-air MRI equipment working in a weak magnetic field with low B₀ up to 0.2 T. This noise exhibits harmonic character, so it is suitable to analyze its properties in the spectral domain. Obtained results of spectral analysis will be used to devise a new cepstral-based filtering method for noise suppression of recorded speech.     

结合振动控制的柱面纵向梯度线圈目标场设计方法

在磁共振成像系统的工作过程中,噪声主要是由梯度线圈系统产生的.梯度线圈置于高均匀度超导磁体的室温孔内,并工作于脉冲状态,频繁的开启和关闭会使线圈中电流急剧随时间变化,变化的电流导致线圈受到变化的洛伦兹力作用,从而产生振动,这种高频振动所发出的噪声会对病人产生刺激,严重时甚至会对病人的听觉神经产生损伤.梯度场的场强越强、切换速度越快,所产生的噪声就越大.降低噪声的最根本方法是通过有效的梯度线圈设计,降低洛伦兹力的空间分布.本文针对纵向梯度线圈,在原经典目标场设计方法基础上,加入对振动参量,从而能够有效地降低线圈工作时所产生的噪声.其具体方法是将振动控制函数作为约束条件,通过目标场法建立数学模型,利用MATLAB进行电磁验算.计算结果表明,所提数学模型可有效地降低线圈振动的最大振幅.     

Acoustic noise simulation and measurement of a gradient insert in a 4 T MRI

High speed switching of current in gradient coils within high magnetic field strength magnetic resonance imaging (MRI) scanners results in high acoustic sound pressure levels (SPL) in and around these machines. Many studies have already been conducted to characterize the sound field in and around MRIs and various methods have been investigated to attenuate the noise generated. In the work presented here a computational vibro-acoustic model was developed based on an iteratively modified and validated finite element (FE) model to characterize the acoustic noise properties of the gradient coil. The simulation results from the computational model were verified through experimental noise measurement for the gradient coil insert in a 4 T MRI scanner by using swept sinusoidal time waveform inputs. Comparisons show that the computational model predicts the noise characteristic properties extremely accurately. There are three dominant frequency bands where the SPL is much higher than those at other frequencies. The SPL in the horizontal direction is much higher than that in the vertical direction due to the excitation to the horizontally placed X coil. The SPL to the inner surface of the coil is higher than far from the inner surface, which proves that the acoustic noise is radiated from the inner surface and primarily caused by the normal vibration of the inner surface. Further verification was conducted by using two types of trapezoidal sequence inputs usually used, which is to simulate real scanning sequences for small animals. Again the accuracy of the developed model is verified. The validated acoustic computational model could be used as an effective method to predict the noise that would be produced by a coil in the design stage. Modification of the structural design or the excitation pulse could be performed to reduce the acoustic noise when the gradient coil is in scanning.     

Vibration analysis and measurement of a gradient coil insert in a 4 T MRI

High speed switching of current in gradient coils within high magnetic field strength Magnetic Resonance Imaging (MRI) scanners may result in high acoustic sound pressure levels in and around these machines. Many studies have already been conducted to characterize the sound field in and around MRIs and various methods have been investigated to attenuate the noise generated. To characterize the vibration properties of the gradient coil, a modified Finite Element (FE) model was developed according to the dimensional design of an available gradient coil insert and the concentration of the copper windings in the coil. The finite element analysis results were verified through experimental modal testing of the same gradient coil in a free-free state (no boundary constraints). Comparisons show that the FE model predicts the vibration properties extremely accurately. Based on the verified FE model, boundary conditions (supports) were added to the model to simulate the operating condition when the gradient coil insert is in place in an MRI machine. Vibration analysis results from the FE model were again verified through experimental vibration testing with the gradient coil insert installed in a 4 T MRI and excited using swept sinusoidal time waveforms. Through a comparison of the vibration signals generated it was found that the vibration resonances, both from the FE model and the experimental vibration testing, shift to higher frequencies after the boundary constraints were applied, as was expected. The predicted vibration response was very close to that measured from the gradient coil insert in operation. The FE modeling procedure that has been developed could easily be used to accurately predict the vibration properties of other gradient coil designs. Furthermore, the vibration analysis results from the FE model could be used in acoustic noise analysis to predict the sound pressure level produced by different types of input current pulse sequences.     

Development of a magnetic measurement device for thin ribbon samples

This paper presents a magnetic measurement device for thin ribbon samples, which are produced by rapid cooling technique. This device enables us to measure magnetic properties easily by only inserting a ribbon sample into a sample holder. The sample holder was made by bakelite to fix any width sample. A long solenoid coil was used to generate a uniform magnetic field and the sample holder was placed at the mid part of the solenoid. The magnetic field strength was measured using a shunt resistor and the magnetic flux density and magnetization in sample ribbons were evaluated by using search coils. The accuracy of measurement was verified with an amorphous metal ribbon sample. Next, we have measured magnetic properties of some magnetic shape memory alloys, which have different compositions. The measured results are compared and we clarified the effect of Sm contents on the magnetic properties.     

Compensation of gradient-induced magnetic field perturbations

Pulsed magnetic field gradients are essential for MR imaging and localized spectroscopy applications. However, besides the desired linear field gradients, pulsed currents in a strong external magnetic field also generate unwanted effects like eddy currents, gradient coil vibrations and acoustic noise. While the temporal magnetic field perturbations associated with eddy currents lead to spectral line shape distortions and signal loss, the vibration-related modulations lead to anti-symmetrical sidebands of any large signal (i.e. water), thereby obliterating the signals from low-concentration metabolites. Here the measurement, characterization and compensation of vibration-related magnetic field perturbations is presented. Following a quantitative evaluation of the various temporal components of the main magnetic field, a digital B0 magnetic field waveform is generated which reduces all temporal variations of the main magnetic field to within the spectral noise level.     

磁共振成像的安全性

对磁共振成像(MRI)的安全性进行了综述,主要涉及五个方面:静磁场、梯度场、射频场、噪声和造影剂.在没有铁磁性外源性物质的条件下,静磁场对人体没有明显的损害,有较高的安全系数.随时间变化的梯度场(dB/dt)可在受试者体内诱导出电场而兴奋神经或肌肉.当梯度上升时间只有数毫秒时,外周神经兴奋是梯度场安全的上限指标.在MRI测定过程中,射频场发射的功率在患者组织内转化成热能,使组织温度升高.MRI运行过程中可产生各种噪声,可能使某些患者的听力受到损伤,使用耳塞仍是削弱噪声最简单和最经济的方法.目前使用的造影剂主要为含钆的化合物,副作用发生率在2%~4%.     

ESR microscopy

New spatial imaging methods to determine the microscopic concentration of unpaired electron spins or paramagnetic ions (ESR microscopy methods) have been developed (a) with an intense magnetic field gradient method based on conventional magnetic resonance imaging (MRI) using field gradient coils in a cavity, (b) by scanning the localized magnetic field or modulation field mechanichally or electronically, and (c) by use of the scanning localized microwave field. Some examples of fossil imaging and of microdosimetry in this laboratory are reviewed briefly.     

Equivalent magnetic dipole method used to design gradient coil for unilateral magnetic resonance imaging

The conventional magnetic resonance imaging(MRI) equipment cannot measure large volume samples nondestructively in the engineering site for its heavy weight and closed structure. In order to realize the mobile MRI, this study focuses on the design of gradient coil of unilateral magnet. The unilateral MRI system is used to image the local area above the magnet. The current density distribution of the gradient coil cannot be used as a series of superconducting nuclear magnetic resonance gradient coils, because the region of interest(ROI) and the wiring area of the unilateral magnet are both cylindrical side arc surfaces. Therefore, the equivalent magnetic dipole method is used to design the gradient coil, and the algorithm is improved for the special case of the wiring area and the ROI, so the X and Y gradient coils are designed.Finally, a flexible printed circuit board(PCB) is used to fabricate the gradient coil, and the magnetic field distribution of the ROI is measured by a Gauss meter, and the measured results match with the simulation results. The gradient linearities of x and y coils are 2.82% and 3.56%, respectively, less than 5% of the commercial gradient coil requirement.     

脉冲线积分场测量系统的研制

介绍了脉冲线测量插入件磁场一二次积分的原理和测量装置的组成,分析了重力、噪声和反射波等因素对测量精度的影响,并采用对称安装金属线、夜间测量、油滴吸收反射波等方法减小了这些因素对测量的影响。脉冲线测量系统的测量结果与霍尔点测法相比符合得较好。利用该装置对实验室即将投入应用的电磁型圆极化波荡器进行了测量,验证了校正线圈和主线圈电流之间的关系。     

一种永磁磁共振中磁体涡流场的测量方法

磁共振成像（Magntic Resonance Imaging,MRI）技术是一种先进的医疗影像技术.在MRI系统中,通过梯度线圈电流快速切换方向,对待测区域施加梯度磁场,产生的梯度磁场会在其周围的金属体内激发出变化的涡旋电场,进而导致金属体内闭合的回路中产生对原来的梯度电流起抑制作用的感生电流,也就是我们所说的涡流.本文介绍了一种测量磁体涡流场的方法,结合电磁感应定律,设计了一种磁体涡流场测量装置,通过硬件采集以及软件处理的方法,将理想梯度场与实际磁场进行相减并将波形实时呈现,实验结果表明该方法可实现对磁体涡流场的测量.     

Theory of MRI in the presence of zero to low magnetic fields and tensor imaging field gradients

Today, all commonly practiced magnetic resonance imaging (MRI) reconstruction methods assume that the magnetic field created by the gradient coils is everywhere truncated by a dominant static uniform magnetic field. However, with the advent of SQUID detected MRI at microtesla fields, the opposite limit attracts attention, i.e., image formation in the unperturbed tensor field of the gradient coils. Here, we show by numerical simulations that, in principle, it is possible to reconstruct the image of an object in the absence of a uniform static field, working with the same gradient field setup as used in conventional MRI. Our calculations show that this approach could increase the image resolution limit attainable at low fields with a minimal incorporation of additional hardware and pulse sequences.     

Multi-objective optimization of gradient coil for benchtop magnetic resonance imaging system with high-resolution

Significant high magnetic gradient field strength is essential to obtaining high-resolution images in a benchtop mag- netic resonance imaging （BT-MRI） system with permanent magnet. Extending minimum wire spacing and maximum wire width of gradient coils is one of the key solutions to minimize the maximum current density so as to reduce the local heating and generate higher magnetic field gradient strength. However, maximum current density is hard to optimize together with field linearity, stored magnetic energy, and power dissipation by the traditional target field method. In this paper, a new multi-objective method is proposed to optimize the maximum current density, field linearity, stored magnetic energy, and power dissipation in MRI gradient coils. The simulation and experimental results show that the minimum wire spacings are improved by 159% and 62% for the transverse and longitudinal gradient coil respectively. The maximum wire width increases from 0.5 mm to 1.5 mm. Maximum gradient field strengths of 157 mT/m and 405 mT/m for transverse and lon- gitudinal coil are achieved, respectively. The experimental results in BT-MRI instrument demonstrate that the MRI images with in-plane resolution of 50 ~tm can be obtained by using the designed coils.     

Distortion-free magnetic resonance imaging in the zero-field limit

MRI is a powerful technique for clinical diagnosis and materials characterization. Images are acquired in a homogeneous static magnetic field much higher than the fields generated across the field of view by the spatially encoding field gradients. Without such a high field, the concomitant components of the field gradient dictated by Maxwell’s equations lead to severe distortions that make imaging impossible with conventional MRI encoding. In this paper, we present a distortion-free image of a phantom acquired with a fundamentally different methodology in which the applied static field approaches zero. Our technique involves encoding with pulses of uniform and gradient field, and acquiring the magnetic field signals with a SQUID. The method can be extended to weak ambient fields, potentially enabling imaging in the Earth’s field without cancellation coils or shielding. Other potential applications include quantum information processing and fundamental studies of long-range ferromagnetic interactions.     

Making MRI quieter

We have mitigated acoustic noise in a 1.5 T cylindrical MRI scanner equipped with epoxy-potted, shielded gradients. It has been widely assumed that MRI acoustic noise comes overwhelmingly from vibrations of the gradient assembly. However, with vibration-isolated gradients contained in an airtight enclosure, we found the primary sources of acoustic noise to be eddy-current-induced vibrations of metal structures such as the cryostat inner bore and the rf body coil. We have elucidated the relative strengths of source-pathways of acoustic noise and assembled a reduced-acoustic-noise demonstration MRI system. This scanner employed a number of acoustic noise reduction measures including a vacuum enclosure of a vibrationally isolated gradient assembly, a low-eddy-current rf coil and a non-conducting inner bore cryostat. The demonstration scanner reduced, by about 20 dBA, the acoustic noise levels in the patient bore to 85 dBA and below for several typical noisy pulse sequences. The noise level standing near the patient bore is 71 dBA and below. We have applied Statistical Energy Analysis to develop a vibroacoustic model of the MR system. Our model includes vibrational sources and acoustic pathways to predict acoustic noise and provides a good spectral match above 400 Hz to experimentally measured sound levels. This tool enables us to factor acoustics into the design parameters of new MRI systems.     

Parallel MRI at microtesla fields

Parallel imaging techniques have been widely used in high-field magnetic resonance imaging (MRI). Multiple receiver coils have been shown to improve image quality and allow accelerated image acquisition. Magnetic resonance imaging at ultra-low fields (ULF MRI) is a new imaging approach that uses SQUID (superconducting quantum interference device) sensors to measure the spatially encoded precession of pre-polarized nuclear spin populations at microtesla-range measurement fields. In this work, parallel imaging at microtesla fields is systematically studied for the first time. A seven-channel SQUID system, designed for both ULF MRI and magnetoencephalography (MEG), is used to acquire 3D images of a human hand, as well as 2D images of a large water phantom. The imaging is performed at 46 mu T measurement field with pre-polarization at 40 mT. It is shown how the use of seven channels increases imaging field of view and improves signal-to-noise ratio for the hand images. A simple procedure for approximate correction of concomitant gradient artifacts is described. Noise propagation is analyzed experimentally, and the main source of correlated noise is identified. Accelerated imaging based on one-dimensional undersampling and 1D SENSE (sensitivity encoding) image reconstruction is studied in the case of the 2D phantom. Actual threefold imaging acceleration in comparison to single-average fully encoded Fourier imaging is demonstrated. These results show that parallel imaging methods are efficient in ULF MRI, and that imaging performance of SQUID-based instruments improves substantially as the number of channels is increased.     

矩阵梯度线圈研究现状与发展趋势

梯度和匀场线圈性能的好坏直接影响磁共振成像质量．常规线圈在成像过程中存在一些固有的不足,如产生的磁场形态单一、不灵活,需要的线圈种类较多,结构较复杂等．而新型矩阵梯度线圈可以较好地弥补这些缺点．本文首先介绍了矩阵梯度线圈的概念及其特性,然后根据结构和功能对其研究现状进行分类汇总,在此基础上对矩阵线圈未来的发展趋势进行分析．此外,本文还对矩阵梯度线圈的前期研究基础进行了介绍．     

EPR Spectroscopy Using Magnetic Field Gradient Modulated by a Triangular Wave

Magnetic field gradient modulation is one of the techniques to obtain an electron paramagnetic resonance (EPR) spectrum in a selected region of the sample. In this study, the magnetic field gradient modulation using a triangular wave was performed to overcome a problem during the sine wave modulation. Plastic materials were used for the bobbins and cases of the electromagnet to reduce the eddy current loss and drive the gradient coils in three-dimensional directions at a frequency of over 160 Hz. While the EPR signal splitting in a nonselected region, which is a problem in spectral analysis, was observed during the simulation and the actual measurement with the sine wave gradient modulation, the EPR signal broadening without splitting was observed in those with the triangular wave modulation. Thus, it is postulated that the triangular wave is more suitable than the sine one for the field gradient modulation. The spatial resolution was determined to be about 4 or 2 mm at the field gradient of 1 or 2 mT/cm, respectively. The separation of the EPR spectra of two types of radicals was also made by the triangular wave gradient modulation. Authors' address: Hidekatsu Yokoyama, Department of Pharmaceutical Sciences, International University of Health and Welfare, 2600-1, Kitakanemaru, Ohtawara 324-8501, Japan     

隧穿磁电阻效应磁场传感器中低频噪声的测量与研究

基于隧穿磁电阻效应(TMR)的磁场传感器具有很高的磁场灵敏度, 但同时噪声也较大,有效抑制TMR磁场传感器的噪声, 尤其是低频噪声的抑制对于其在高灵敏度要求场合的应用具有重要的意义. 本文采用高精度数据采集卡搭建了噪声测量系统, 测量了全桥结构TMR磁场传感器的噪声频谱图, 发现TMR传感器的噪声在低频段表现为1/f特性, 同时噪声功率谱密度与工作电流平方成正比关系; 低频噪声在自由层翻转区间内噪声急剧增大, 证明了1/f噪声主要来源于磁噪声, 这一结果为TMR磁场传感器的噪声特性优化指明了方向.     

基于Pareto优化理论的多目标超椭梯度线圈设计

磁共振系统梯度线圈设计是一个多目标优化问题,在设计时需要综合考虑能耗、磁场能、线性度等设计要求.这些设计要求通常难以同时获得极小解,因此在设计梯度线圈时需要权衡线圈的各方面的设计需求.本文基于柱面可展性和流函数设计方法,结合Pareto优化方法实现了在超椭圆柱设计表面上梯度线圈的多目标设计.分别分析了磁场能、能耗目标对梯度线圈线性度、线圈构型的影响;并在Pareto解空间中分析各目标的相互变化关系,通过数值算例验证了该方法在超椭梯度线圈设计时的有效性与灵活性.优化结果显示,在满足线性度误差小于5%,能耗与磁场能分别小于用户设定值的设计约束下,梯度线圈的多目标设计存在多个局部优化解.该方法可以直观地比较相同目标函数值的情况下各单目标的具体表现,有利于实现不同的设计要求下梯度线圈的最终定型设计.