乙烯基二联苯单体的螺旋选择性自由基聚合

为了深入理解乙烯基二联苯单体自由基聚合过程中的手性传递,进行了手性单体(+)-2-[(S)-异丁氧羰基-5-(4′-己氧基苯基)苯乙烯、非手性单体2-丁氧羰基-5-(4′-己氧基苯基)苯乙烯的均聚反应及它们二者的共聚反应,探讨了聚合温度和溶剂性质对手性单体均聚物旋光活性、手性单体含量对共聚物旋光活性以及聚合反应溶剂的超分子手性对共聚物旋光活性的影响.研究发现,降低聚合温度、采用液晶性反应介质有利于得到旋光度大的聚合物;少量手性单体的引入即可诱导共聚物形成某一方向占优的螺旋构象,比旋光度随手性单体的含量增加呈线性增长;在胆甾相液晶中制备的非手性单体聚合物不具有光学活性.这些结果表明,该类乙烯基二联苯聚合物具有动态螺旋构象,其光学活性主要依赖于主链的立构规整度和侧基不对称原子的手性.     

Enhanced asymmetric induction for the copolymerization of CO2 and cyclohexene oxide with unsymmetric enantiopure salenCo(III) complexes: synthesis of crystalline CO2-based polycarbonate

Enantiopure metal-complex catalyzed asymmetric alternating copolymerization of CO(2) and meso-epoxides is a powerful synthetic strategy for preparing optically active polycarbonates with main-chain chirality. The previous studies regarding chiral zinc catalysts provided amorphous polycarbonates with moderate enantioselectivity, and thus, developing highly stereoregular catalysts for this enantioselective polymerization is highly desirable. Herein, we report the synthesis of highly isotactic poly(cyclohexene carbonate)s from meso-cyclohexene oxide using dissymmetrical enantiopure salenCo(III) complexes in conjunction with bis(triphenylphosphine)iminium chloride (PPNCl) as catalyst. The presence of a chiral induction agent such as (S)-propylene oxide or (S)-2-methyltetrahydrofuran significantly improved the enantioselectivity regarding (S,S)-salenCo(III) catalyst systems. Up to 98:2 of RR:SS was observed in the resultant polycarbonates obtained from the catalyst system based on (S,S)-salenCo(III) complex 4d bearing an adamantyl group on the phenolate ortho position, in the presence of (S)-2-methyltetrahydrofuran. Primary ONIOM (DFT:UFF) calculations, which were performed to investigate the effect of the competitive coordination of (S)-induction agent versus cyclohexene oxide to Co(III) center on enantioselectivity, suggest that the (S)-C-O bond in cyclohexene oxide is more favorable for cleavage, due to the interaction between oxygen atom of (S)-induction agent and (S)-C-H of the coordinated cyclohexene oxide. The highly isotactic poly(cyclohexene carbonate) is a typical semicrystalline polymer, possessing a melting point of 216 °C and a decomposition temperature of 310 °C.     

Synthesis and redox properties of racemic electroactive polymers containing axially chiral adamantyl segments

A method of introducing chirality directly into a polymer backbone has been developed that employs the dissymmetry of an adamantane derivative with axial chirality. This new chiral adamantane building block was readily functionalized with electroactive thiophene rings using palladium-catalyzed cross-coupling methodology. The two resulting electroactive monomers were electropolymerized to create racemic electroactive polymers containing phenyl-capped oligothiophene segments alternating with chiral adamantyl segments. Synthesis, electrochemistry, and spectroelectrochemistry studies are reported.     

基于2,5-二(4′-甲酰基苯基)苯乙烯的螺旋链光学活性聚合物的合成与表征

通过2,5-二溴苯乙烯与对甲酰基苯硼酸的Suzuki偶联反应得到2,5-二(4′-甲酰基苯基)苯乙烯.在催化剂量的冰乙酸存在下,与光学纯的(S)-(-)-α-甲基苄胺或(R)-(+)-α-甲基苄胺发生缩和反应,得到了一对手性非外消旋单体,(+)-2,5-二{4-′[(N-(S)-α-甲基苄亚胺基)次甲基]苯基}苯乙烯和(-)-2,5-二{4′-[(N-(R)-α-甲基苄亚胺基)次甲基]苯基}苯乙烯.以偶氮二异丁腈(AIBN)或过氧化苯甲酰(BPO)为引发剂,经自由基溶液聚合得到光学活性聚合物.比旋光度、紫外-可见吸收光谱以及圆二色光谱研究表明,聚合物主链可能形成了某一方向占优的稳定螺旋构象,且该螺旋构象的旋光方向与单体的旋光方向相反.聚合条件对聚合物的光学活性有很大影响,在极性较大的芳香族溶剂和较高温度下得到的聚合物具有和单体相差更大的比旋光度.侧基的手性基团脱除后,聚合物仍具有一定的旋光性,说明聚合过程中形成的螺旋手性具有一定的记忆效应.     

Copolymers containing alternating sequences of nucleic acid base pairs. II. Polymerization studies

The objective of this project was to utilize the alternating copolymerizability of electrondonor monomers with electron-acceptor monomers to selectively introduce nucleic acid bases into copolymers in a controlled sequence distribution. To this end, maleimide monomers containing the adenine, thymine, cytosine, and 6-chloropurine moieties were converted to their hompolymers. The homopolymer of 1-(vinyloxyethoxy)thymine was also prepared. Alternating copolymers of the adenine maleimide monomer and the corresponding 6-chloropurine maleimide monomer with 1-(vinyloxyethoxy)thymine were prepared. The latter copolymer was converted to the alternating adenine–thymine copolymer by reaction with ammonia. Characterization of the polymers and copolymers via spectroscopic methods and physical measurements confirm their proposed structures. Monomer syntheses and characterization, as well as studies designed to establish the extent and nature of adenine–thymine interactions in the copolymers, are reported in accompanying papers.     

Main-Chain Chirality and Optical Activity in Polymers Consisting of C?C Chains

Main-chain chirality is the optical activity resulting from the configurational or conformational arrangement in the main chain of a polymer. The chirality of the most important types of structures has been investigated on the basis of systematic considerations of symmetry. This has led to the surprising result that even in polymers derived from 1-substituted or nonsymmetric 1,1-disubstituted olefins (the technologically most important polymers) several types of chiral structures exist, which are expected to result in optical activity if a particular enantiomer is favorably formed. By carrying out an asymmetric cyclopolymerization, it has been possible to obtain certain structural types in the form of optically active copolymers or homopolymers (e.g., copolymers of styrene with methyl methacrylate, or even the homopolymer of styrene). Another new group of optically active polymers consists of the atropisomeric helical polyisocyanides, poly(trityl methacrylates), and polychlorals. Optically active polymers are already used as adsorbents for the chromatographic separation of racemic mixtures. Further applications are likely to emerge.     

Synthesis and characterization of styrenic polymers with pendant pyrazole groups. II

The synthesis of styrenic monomers that have pyrazolic or bipyrazolic pendant groups is described. Their homopolymerization and their copolymerization with maleic anhydride (MA) and N-(3-acetoxy propyl) maleimide is reported. The monomers were prepared from the Williamson reaction between 2-pyridine carbinol, hydroxy monopyrazole, hydroxy bipyrazole, and chloromethyl styrene. The homopolymerizations of such styrenic monomers were tried under different conditions, which led to low molecular weight polymers with a high polydispersity. However, alternating copolymers were obtained using maleic anhydride or N-(3-acetoxy propyl) maleimide as comonomers, as shown by ¹H-NMR, elemental analysis, and reactivity ratios r₁ and r₂. Furthermore, the hydrolysis of the acetate function of different copolymers was performed quantitatively. Unlike the acetoxy copolymers, such products do not have any glass transition temperature. Thermogravimetric investigations have shown that these copolymers exhibit good thermostability. © 1994 John Wiley & Sons, Inc.     

Design of maleimide monomer for higher level of alternating sequence in radical copolymerization with styrene

This work deals with design of maleimide monomer toward more precise control of alternating sequence for radical copolymerization with styrene. Crucial in this study is sequence analysis by MALDI‐TOF‐MS for resultant copolymers that was obtained via ruthenium‐catalyzed living radical copolymerization with a malonate‐based alkyl halide initiator showing selective initiation ability. The copolymers of a simple N‐alkyl maleimide [e.g., N‐ethyl maleimide (EMI)] with styrene gave complicated peak patterns for the MALDI‐TOF‐MS spectra indicating low degree of alternating sequence, in contrary to expectation from the reactivity ratios (almost zero). A simple substitution of methyl group (CH₃) of EMI with trifluoromethyl (CF₃: CF₃‐MI) made the peak patterns much simpler giving the copolymer with higher alternating sequence. More interestingly, the peak interval of the copolymer at earlier polymerization stage was equal to sum of the molecular weights of CF₃‐MI and styrene, suggesting possibility of the pair propagation of the monomers. Indeed, ¹H NMR analyses of the mixture of maleimide with styrene suggested stronger interaction of CF₃‐MI than EMI. Based on the results, maleimide derivatives carrying a substituent‐designable electron‐withdrawing group [ROC(?O)N–: R = substituent] were newly designed toward incorporation of functional side chains. They also gave higher alternating sequence for the copolymerization with styrene. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 367–375     

Synthesis and Mechanism of a Main‐Chain Chiral Polymer Based on Asymmetric Cyclopolymerization

A systematic study of the asymmetric cyclocopolymerization of bis(4‐vinylbenzoate)s, derived from chiral diols, with styrene has been made from the viewpoint of synthesizing the main‐chain chiral polymer. On the basis of using over 30 chiral diols as templates, we summarize the relationship between the structure of the chiral template and the chiroptical properties of the template‐free polymer. For simple chiral diols, the chirality induction efficiency increased in the order 1,2‐diol < 1,4‐diol < 1,3‐diol. Chiral diols with two chiral centers exhibited higher chirality induction efficiency than those having one chiral center only. The chirality induction efficiency for cyclic 1,2‐diols increased with the ring size in the order 5‐ < 6‐ < 7‐ < 8‐membered rings, and that for acyclic 1,2‐diols increased with the bulkiness of the substituent at the chiral center. In addition, a chirality induction mechanism has been proposed on the basis of model radical cyclization experiments and computational studies. Chirality induction could be caused by the inhibition of the formation of one racemo unit among the four stereoisomers due to the strong dependence of the stereoselectivity in intermolecular additions on the absolute configuration of the cyclized radical. The mechanism was examined using the Lewis‐acid and monomer‐concentration effects.     

Asymmetric polymerization of methacrylates

The syntheses of optically active polymers having helical conformation from bulky methacrylates are reviewed focusing on selected topics. The monomers include triphenylmethyl methacrylate and its analogues. Asymmetric anionic polymerization of the monomers gives isotactic, optically active polymers having a helical structure with excess helicity. The isotactic content and the extent of helical‐sense excess depend on the monomer structure and the reaction conditions. In the case of methacrylates, completely isotactic and single‐handed helical polymers can be produced by asymmetric anionic polymerization (helix‐sense‐selective polymerization). Asymmetric radical polymerization is also possible for this class of monomer. Some of the helical polymers show chiral recognition ability toward a wide range of racemic compounds. Polymers having main‐chain configurational chirality are also discussed.     

Synthesis of comb‐like polystyrene with poly(N‐phenyl maleimide‐alt‐p‐chloromethyl styrene) as macroinitiator

The copolymerization of N‐phenyl maleimide and p‐chloromethyl styrene via reversible addition–fragmentation chain transfer (RAFT) process with AIBN as initiator and 2‐(ethoxycarbonyl)prop‐2‐yl dithiobenzoate as RAFT agent produced copolymers with alternating structure, controlled molecular weights, and narrow molecular weight distributions. Using poly(N‐phenyl maleimide‐alt‐p‐chloromethyl styrene) as the macroinitiator for atom transfer radical polymerization of styrene in the presence of CuCl/2,2′‐bipyridine, well‐defined comb‐like polymers with one graft chain for every two monomer units of backbone polymer were obtained. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2069–2075, 2006     

Synthesis and Polymerization of (S)-4-Methyl-2-N,N-dimethylaminopentyl Methacrylate

(S)-4-Methyl-2-N,N-dimethylaminopentyl methacrylate (DMAPM) was synthesized from the reaction of N,N-dimethyl-L-leucinol with methacryl chloride, and its radical polymerization was investigated. It was found that DMAPM readily polymerized by α,α¹-azobisisobutyronitrile (AIBN) as an initiator to give poly-DMAPM. The copolymerization of DMAPM(M₁) with styrene(Mz) was also studied in various solvents with AIBN as an initiator at 60°C. From the result obtained in benzene, Q and e values of DMAPM were determined to be 0.64 and -0.04, respectively. Specific rotations of the copolymers of DMAPM with styrene were not proportional to the weight percent of the DMAPM unit incorporated, but the observed relation gave a downward curve. The copolymerizations DMAPM with α, β-disubstituted monomers such as maleic acid, maleimide, and N-phenylmaleimide were carried out in order to induce asymmetric center in the polymer chain. After hydrolysis of the copolymers obtained, the hydrolyzed polymers were found to be optically active, suggesting an induction of asymmetric center into the polymer chain.     

Long range chirality transfer in free radical polymerization of vinylterphenyl monomers bearing chiral alkoxy groups

Two series of chiral bulky vinyl aromatics, 2‐(4'‐alkoxyphenyl)‐5‐(4'‐hexyloxyphenyl)styrene ( S‐Am (m = 0, 1, 2, 3)/ R‐A0 ) and 2‐(4'‐hexyloxyphenyl)‐5‐(4'‐alkoxyphenyl)styrene ( S‐Bm (m = 0, 1, 2, 3)/ R‐B0 ), were synthesized and radically polymerized (where m denotes the carbon number between stereogenic center and ether oxygen atom). The generation and stereomutation of helical structures as well as chirality transfer from the stereogenic center of the side‐group to the polymer backbone during polymerization were investigated by a combination of ¹H‐ and ¹³C‐NMR, polarimetry, circular dichroism spectroscopy, liquid crystal induced circular dichroism, and computer simulation. All the polymers, except S‐B3, display optical rotations and Cotton effects in the UV‐Vis absorption region of terphenyl pendant, which are quite different from the corresponding model compounds and monomers, suggesting the formation of chiral secondary structures, that is, skewed packing of side‐groups and twisting of polymer backbones with a dominant screw sense. The sign of optical rotation changes alternatively and the strength diminishes when m increases from 1 to 3. However, although the stereogenic centers in S‐A0 and S‐B0 are closer to the vinyl group than those in S‐A1 and S‐B1, separately, a weaker chiral induction power is observed. Moreover, optical rotations of polymers derived from S‐A0 / R‐A0 and S‐B0 / R‐B0 are opposite in sign and increase with annealing time in tetrahydrofuran. These results are in a sharp contrast with our previous findings in similar vinylterphenyl compounds, where ‐COO‐ rather than ‐O‐ links the chiral alkyl tail to the terphenyl group, manifesting a remarkable effect of small structural variation of side‐group on polymer chiroptical properties and complexity of chirality transfer in helix‐sense‐selective polymerization. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 3674–3687     

Highly efficient and stable blue‐light‐emitting binaphthol‐fluorene copolymers: A joint experimental and theoretical study of the main‐chain chirality

In a quest for the main‐chain chiral and highly stable blue‐light‐emitting π‐conjugated polymers, a novel series of soluble conjugated random and alternating copolymers (PF‐BN) derived from fluorene and axially chiral 1,1′‐binaphthol (BINOL) were successfully synthesized by Suzuki coupling polymerization. The polymer structures, optical properties, and their electrochemical properties were investigated by ¹H NMR, TGA/DSC, UV‐Vis absorption, photoluminescence, cyclic voltammetry, circular dichroism spectroscopy, and DFT calculations. The blue‐light‐emitting BINOL‐containing copolymers with proper content of BINOL show highly efficient photoluminescence and ultra highly stable light‐emission with almost unchanged fluorescent spectra after annealing at 200 °C in air for 10 h. The joint experimental and theoretical study of the main‐chain chirality reveals that (1) the chirality of BINOL can be transferred to the polymer backbone, (2) the effective conjugation length is about one BINOL and three fluorenes, (3) the main active chiral block in the copolymers is probably composed by one BINOL with the other two or three fluorenes, and (4) the dihedral angle in the PF‐BN copolymers should be larger than 105°. The incorporation of BINOL into the polyfluorene backbone is an effective way to produce highly efficient and stable blue‐light‐emitting main‐chain chiral conjugated polymer with interesting optoelectronic properties. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3868–3879, 2010     

Photoacid generating polymers based on sulfonyloxymaleimides and application as single-component resists

Three sulfonyloxymaleimides (RsOMI), N-(tosyloxy)maleimide (TsOMI), N-(methane-sulfonyloxy)maleimide (MsOMI), and N-(trifluoromethanesulfonyloxy)maleimide (TfOMI), have been synthesized and used to make novel photoacid generating polymers. The sulfonyloxymaleimides easily copolymerized with styrene derivatives to give high molecular weight polymers having an alternating structure of both monomer units. Terpolymers based on RsOMI and p-(tert-butyloxycarbonyloxy)styrene (t-BOCSt) were prepared for enhancing resist properties such as adhesion to substrates, solubility in aqueous alkaline solutions, or transparency in the deep-UV region. The RsOMI copolymers were found to produce corresponding sulfonic acids (RsOH), TsOH, MsOH, and TfOH, by deep-UV irradiation in the film state. Thus, the polymers having both the RsOMI and t-BOCSt units show the capability of a single-component, chemically amplified resist system in the deep-UV region without addition of any photoacid generator. Positive- and negative-tone images were obtained by exposure of the polymer films to deep-UV and post-exposure bake followed by development with organic solvents or aqueous alkaline solutions. © 1996 John Wiley & Sons, Inc.     

Construction of Supramolecular Chirality in Polymer Systems:Chiral Induction,Transfer and Application

Chirality, commonly found in organisms, biomolecules and nature such as L-amino acids and D-sugars, has been extensively studied in chemistry and biomedical science. Hence, the demand for simple and efficient construction of chiral structures, especially chiral polymers, has been rapidly growing due to their potential applications in chemosensors, asymmetric catalysis and biological materials. However, most chiral polymers reported are prepared directly from chiral monomers/chiral catalysts, the...     

Novel atropoisomeric binaphthyl-containing liquid crystalline copolymers forming chiral nematic phases

Novel liquid crystalline (LC) acrylate side group copolymers, which consist of nematogenic phenyl 4-methoxybenzoate acrylate monomer (A) and novel chiral binaphthyl (BN) methacrylate monomers (MB-n) have been synthesized. The copolymers prepared differ in the spacer lengths of MB-n (n 3,5,11) and in their compositions. The homopolymers of the three new chiral binaphthyl monomers MB-n were also prepared. Copolymers with a low concentration of binaphthyl monomer units (less than 16 mol%) display a cholesteric mesophase. The induced chirality in the polymers is due to atropoisomerism (C2-symmetry) of the molecules. The helical twisting powers (beta), caused by the atropoisomeric units in the synthesized copolymers, were determined, and their temperature dependencies studied. The unusually high negative temperature coefficient of beta observed above the glass transition temperature is explained in terms of conformational changes of the BN molecules in the copolymers.     

Donor-Acceptor Complexes in Copolymerization. XLIV. Copolymerization of Styrene and α-Methylstyrene with Acrylic and α-Substituted Acrylic Esters in the Presence of Aluminum Compounds

Abstract

The copolymerization of styrene (S) with methyl acrylate (MA) and with methyl methacrylate (MMA) in the presence of AlEt₃ yields equimolar, alternating copolymers while no polymer is formed in α-methylstyrene (MS)-MA and MS-MMA systems. In the presence of AlEt_1.5Cl_l,5 (EASC), S-MA and S-MMA yield alternating copolymers, S-methyl a-chloroacrylate (MCA), MS-MA and MS-MMA yield a mixture of alternating and cationic polymers, and MS-MCA yields cationic polymer only. In the presence of A1C1₃, S-MA and MS-MA yield a mixture of alternating and cationic polymers and S-MMA and MS-MMA yield cationic polymer only. The cotacticity distributions of the alternating S-MA and S-MMA copolymers prepared in the presence of AlEt₃, EASC, and A1C1, are the same; the coisotactic, co-heterotactic, and cosyndiotactic fractions being approximately in the ratio 1:2:1. The cosyndiotactic fractions of the alter-nating copolymers prepared in the presence of EASC are in the order MS-MMA > MS-MA > S-MCA > S-MMA=S-MA.     

Chiral recognition in self-complexes of tetrahydroimidazo[4,5-d]imidazole derivatives: from dimers to heptamers

The chiral discrimination in the self-association of chiral 1,3a,4,6a-tetrahydroimidazo[4,5-d]imidazoles has been studied using density functional theory methods. Clusters from dimers to heptamers have been considered. The heterochiral dimers (RR:SS or SS:RR) are more stable than the homochiral ones (RR:RR or SS:SS) with energy differences up to 17.5 kJ/mol. Besides, in larger clusters the presence of two adjacent homochiral molecules impose an energetic penalty when compared to alternated chiral systems (RR:SS:RR:SS...). The differences in interaction energy within the dimers of the different derivatives have been analyzed based on the atomic energy partition carried out within the atoms in molecules framework. The mechanism of proton transfer in the homo- and heterochiral dimers shows large transition-state barriers except in those cases in which a third additional molecule is involved in the transfer. The optical rotatory power of several clusters of the parent compound have been calculated and rationalized based on the number of homochiral interactions and the number of monomers of each enantiomer within the complexes.     

Control of thermal,mechanical, and optical properties of three‐component maleimide copolymers by steric bulkiness and hydrogen bonding

N‐substituted maleimides polymerize in the presence of a radical initiator to give polymers with excellent thermal stabilities and transparency. In this study, we synthesized various maleimide copolymers with styrenes and acrylic monomers to control their thermal and mechanical properties by the introduction of bulky substituents and intermolecular hydrogen bonding. Three‐component copolymers of N‐(2‐ethylhexyl)maleimide in combination with styrene, α‐methylstyrene (MSt), or 1‐methylenebenzocyclopentane (BC5) as the styrene derivatives, and n‐butyl acrylate, 2‐hydroxyethyl acrylate, 4‐hydroxybutyl acrylate, or acrylic acid as the acrylic monomers were prepared by radical copolymerization. These copolymers were revealed to exhibit excellent heat resistance by thermogravimetric analysis. Glass transition temperatures increased by the introduction of bulky MSt and BC5 repeating units. The mechanical properties of the copolymer films were improved by the introduction of intermolecular hydrogen bonding. Optical properties, such as transmittance, refractive index, Abbe number, and birefringence, were determined for the copolymers. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1569–1579