The Purification and Characterization of Lipases from <Emphasis Type="Italic">Lasiodiplodia theobromae</Emphasis>, and Their Immobilization and Use for Biodiesel Production from Coconut Oil

The coconut kernel-associated fungus, Lasiodiplodia theobromae VBE1, was grown on coconut cake with added coconut oil as lipase inducer under solid-state fermentation conditions. The extracellular-produced lipases were purified and resulted in two enzymes: lipase A (68,000 Da)—purified 25.41-fold, recovery of 47.1%—and lipase B (32,000 Da)—purified 18.47-fold, recovery of 8.2%. Both lipases showed optimal activity at pH 8.0 and 35 °C, were activated by Ca²⁺, exhibited highest specificity towards coconut oil and p-nitrophenyl palmitate, and were stable in iso-octane and hexane. Ethanol supported higher lipase activity than methanol, and n-butanol inactivated both lipases. Crude lipase immobilized by entrapment within 4% (w/v) calcium alginate beads was more stable than the crude-free lipase preparation within the range pH 2.5–10.0 and 20–80 °C. The immobilized lipase preparation was used to catalyze the transesterification/methanolysis of coconut oil to biodiesel (fatty acyl methyl esters (FAMEs)) and was quantified by gas chromatography. The principal FAMEs were laurate (46.1%), myristate (22.3%), palmitate (9.9%), and oleate (7.2%), with minor amounts of caprylate, caprate, and stearate also present. The FAME profile was comparatively similar to NaOH-mediated transesterified biodiesel from coconut oil, but distinctly different to petroleum-derived diesel. This study concluded that Lasiodiplodia theobromae VBE1 lipases have potential for biodiesel production from coconut oil.     

Physical and Covalent Immobilization of <Emphasis Type="Italic">Lipase</Emphasis> onto Amine Groups Bearing Thiol-Ene Photocured Coatings

In this study, amine groups containing thiol-ene photocurable coating material for lipase immobilization were prepared. Lipase (EC 3.1.1.3) from Candida rugosa was immobilized onto the photocured coatings by physical adsorption and glutaraldehyde-activated covalent bonding methods, respectively. The catalytic efficiency of the immobilized and free enzymes was determined for the hydrolysis of p-nitrophenyl palmitate and also for the synthesis of p-nitrophenyl linoleate. The storage stability and the reusability of the immobilized enzyme and the effect of temperature and pH on the catalytic activities were also investigated. The optimum pH for free lipase and physically immobilized lipase was determined as 7.0, while it was found as 7.5 for the covalent immobilization. After immobilization, the optimum temperature increased from 37 °C (free lipase) to 50–55 °C. In the end of 15 repeated cycles, covalently bounded enzyme retained 60 and 70 % of its initial activities for hydrolytic and synthetic assays, respectively. While the physically bounded enzyme retained only 56 % of its hydrolytic activity and 67 % of its synthetic activity in the same cycle period. In the case of hydrolysis V _max values slightly decreased after immobilization. For synthetic assay, the V _max value for the covalently immobilized lipase was found as same as free lipase while it decreased dramatically for the physically immobilized lipase. Physically immobilized enzyme was found to be superior over covalent bonding in terms of enzyme loading capacity and optimum temperature and exhibited comparable re-use values and storage stability. Thus, a fast, easy, and less laborious method for lipase immobilization was developed.     

Efficient Regioselective Synthesis of the Crotonyl Polydatin Prodrug by <Emphasis Type="Italic">Thermomyces lanuginosus</Emphasis> Lipase: a Kinetics Study in Eco-friendly 2-Methyltetrahydrofuran

Bio-based solvents have recently been discussed as sustainable green and promising alternatives to conventional organic media for enzymatic processes. In this paper, highly regioselective synthesis of the 6″-O-crotonyl-polydatin catalyzed by Thermomyces lanuginosus lipase (TLL) in biomass-derived 2-methyltetrahydrofuran (2-MeTHF) was successfully performed for the first time. The results indicated that TLL lipase displayed significantly improved catalytic performance in 2-MeTHF than in other traditional solvents. Under the optimal conditions, the initial reaction rate, 6″-regioselectivity, and maximum substrate conversion were as high as 12.38 mM h^?1, 100 %, and 100 %, respectively. Moreover, further investigations on the operational stability, kinetic parameters like V _max, K _m, V _max/K _m, and E _a revealed that 2-MeTHF exhibited excellent biocompatibility and rendered the greener process of the enzymatic acylation.     

Production of <Emphasis Type="Italic">R</Emphasis>-Mandelic Acid Using Nitrilase from Recombinant <Emphasis Type="Italic">E. coli</Emphasis> Cells Immobilized with Tris(Hydroxymethyl)Phosphine

Recombinant Escherichia coli cells harboring nitrilase from Alcaligenes faecalis were immobilized using tris(hydroxymethyl)phosphine (THP) as the coupling agent. The optimal pH and temperature of the THP-immobilized cells were determined at pH 8.0 and 55 °C. The half-lives of THP-immobilized cells measured at 35, 40, and 50 °C were 1800, 965, and 163 h, respectively. The concentration of R-mandelic acid (R-MA) reached 358 mM after merely 1-h conversion by the immobilized cells with 500 mM R,S-mandelonitrile (R,S-MN), affording the highest productivity of 1307 g L^?1 day^?1 and the space-time productivity of 143.2 mmol L^?1 h^?1 g^?1. The immobilized cells with granular shape were successfully recycled for 60 batches using 100 mM R,S-MN as substrate at 40 °C with 64% of relative activity, suggesting that the immobilized E. coli cells obtained in this study are promising for the production of R-MA.     

Production and Biotechnological Application of Extracellular Alkalophilic Lipase from Marine Macroalga-Associated <Emphasis Type="Italic">Shewanella algae</Emphasis> to Produce Enriched C<Subscript>20-22</Subscript><Emphasis Type="Italic">n</Emphasis>-3 Polyunsaturated Fatty Acid Concentrate

An extracellular alkalophilic lipase was partially purified from heterotrophic Shewanella algae (KX 272637) associated with marine macroalgae Padina gymnospora. The enzyme possessed a molecular mass of 20 kD, and was purified 60-fold with a specific activity of 36.33 U/mg. The enzyme exhibited V_max and K_m of 1000 mM/mg/min and 157 mM, respectively, with an optimum activity at 55 °C and pH 10.0. The catalytic activity of the enzyme was improved by Ca²⁺ and Mg²⁺ ions, and the enzyme showed a good tolerance towards organic solvents, such as methanol, isopropanol, and ethanol. The purified lipase hydrolyzed the refined liver oil from leafscale gulper shark Centrophorus squamosus, yielding a total C_20-22 n-3 PUFA concentration of 34.99% with EPA + DHA accounting the major share (34% TFA), after 3 h of hydrolysis. This study recognized the industrial applicability of the thermostable and alkalophilic lipase from marine macroalga-associated bacterium Shewanella algae to produce enriched C_20-22 n-3 polyunsaturated fatty acid concentrate.     

Heterologous Expression of Aldehyde Dehydrogenase in <Emphasis Type="Italic">Lactococcus lactis</Emphasis> for Acetaldehyde Detoxification at Low pH

Aldehyde dehydrogenase (E.C. 1.2.1.x) can catalyze detoxification of acetaldehydes. A novel acetaldehyde dehydrogenase (istALDH) from the non-Saccharomyces yeast Issatchenkia terricola strain XJ-2 has been previously characterized. In this work, Lactococcus lactis with the NIsin Controlled Expression (NICE) System was applied to express the aldehyde dehydrogenase gene (istALDH) in order to catalyze oxidation of acetaldehyde at low pH. A recombinant L. lactis NZ3900 was obtained and applied for the detoxification of acetaldehyde as whole-cell biocatalysts. The activity of IstALDH in L. lactis NZ3900 (pNZ8148-istALDH) reached 36.4 U mL^?1 when the recombinant cells were induced with 50 ng mL^?1 nisin at 20 °C for 2 h. The IstALDH activity of recombinant L. lactis cells showed higher stability at 37 °C and pH 4.0 compared with the crude enzyme. L. lactis NZ3900 (pNZ8148-istALDH) could convert acetaldehyde at pH 2.0 while the crude enzyme could not. Moreover, the resting cells of L. lactis NZ3900 (pNZ8148-istALDH) showed a 2.5-fold higher activity and better stability in catalyzing oxidation of acetaldehyde at pH 2.0 compared with that of Escherichia coli expressing the IstALDH. Taken together, the L. lactis cells expressing recombinant IstALDH are potential whole-cell biocatalysts that can be applied in the detoxification of aldehydes.     

Enhanced Enzymatic Synthesis of a Cephalosporin,Cefadroclor, in the Presence of Organic Co-solvents

In this study, we investigated the enzymatic synthesis of a semi-synthetic cephalosporin, cefadroclor, from 7-aminodesacetoxymethyl-3-chlorocephalosporanic acid (7-ACCA) and p-OH-phenylglycine methyl ester (D-HPGM) using immobilized penicillin G acylase (IPA) in organic co-solvents. Ethylene glycol (EG) was employed as a component of the reaction mixture to improve the yield of cefadroclor. EG was found to increase the yield of cefadroclor by 15–45%. An investigation of altered reaction parameters including type and concentration of organic solvents, pH of reaction media, reaction temperature, molar ratio of substrates, enzyme loading, and IPA recycling was carried out in the buffer mixture. The best result was a 76.5% conversion of 7-ACCA, which was obtained from the reaction containing 20% EG (v/v), D-HPGM to 7-ACCA molar ratio of 4:1 and pH 6.2, catalyzed by 16 IU mL^?1 IPA at 20 °C for 10 h. Under the optimum conditions, no significant loss of IPA activity was found after seven repeated reaction cycles. In addition, cefadroclor exhibited strong inhibitory activity against yeast, Bacillus subtilis NX-2, and Escherichia coli and weaker activity against Staphylococcus aureus and Pseudomonas aeruginosa. Cefadroclor is a potential antibiotic with activity against common pathogenic microorganisms.     

Comparative Study on Different Expression Hosts for Alkaline Phytase Engineered in <Emphasis Type="Italic">Escherichia coli</Emphasis>

The application of alkaline phytase as a feed additive is restricted by the poor specific activity. Escherichia coli is a frequently used host for directed evolution of proteins including alkaline phytase towards improved activity. However, it is not suitable for production of food-grade products due to potential pathogenicity. To combine the advantages of different expression systems, mutants of the alkaline phytase originated from Bacillus subtilis 168 (phy168) were first generated via directed evolution in E. coli and then transformed to food-grade hosts B. subtilis and Pichia pastoris for secretory expression. In order to investigate the suitability of different expression systems, the phy168 mutants expressed in different hosts were characterized and compared in terms of specific activity, pH profile, pH stability, temperature profile, and thermostability. The specific activity of B. subtilis-expressed D24G/K70R/K111E/N121S mutant at pH 7.0 and 60 °C was 30.4 U/mg, obviously higher than those in P. pastoris (22.7 U/mg) and E. coli (19.7 U/mg). Moreover, after 10 min incubation at 80 °C, the B. subtilis-expressed D24G/K70R/K111E/N121S retained about 70 % of the activity at pH 7.0 and 37 °C, whereas the values were only about 25 and 50 % when expressed in P. pastoris and E. coli, respectively. These results suggested B. subtilis as an appropriate host for expression of phy168 mutants and that the strategy of creating mutants in one host and expressing them in another might be a new solution to industrial production of proteins with desired properties.     

Optimization of Levan Production by Cold-Active <Emphasis Type="Italic">Bacillus licheniformis</Emphasis> ANT 179 and Fructooligosaccharide Synthesis by Its Levansucrase

Fructooligosaccharides (FOS) and levan attract much attention due to a wide range of applications in food technology and pharmaceutical and cosmetic industry. Bacillus licheniformis ANT 179, isolated from Antarctica soil, produced levansucrase and levan in a medium containing sucrose as carbon substrate. In this study, characterization of levansucrase and production of short-chain FOS and levan were investigated. Temperature and pH optimum of the enzyme were found to be 60 °C and pH 6.0, respectively. The optimization of fermentation conditions for levan production using sugarcane juice by response surface methodology (RSM) was carried out. Central composite rotatable design was used to study the main and the interactive effects of medium components: sugarcane juice and casein peptone concentration on levan production by the bacterium. The optimized medium with sugarcane juice at 20 % (v/v) and casein peptone at 2 % (w/v) was found to be optimal at an initial pH of 7.0 and incubation temperature of 35 °C for 48 h. Under these conditions, the maximum levan concentration was 50.25 g/L on wet weight basis and 16.35 g/L on dry weight basis. The produced inulin type FOS (kestose and neokestose) and levan were characterized by Fourier transform infrared spectroscopy (FT-IR) and nuclear magnetic resonance (NMR) analysis. The study revealed that the levansucrase could form FOS from sucrose. The locally available low-cost substrate such as sugarcane juice in the form of a renewable substrate is proposed to be suitable even for scale-up production of enzyme and FOS for industrial applications. The levan and FOS synthesized by the bacterium are suitable for food applications and biomedical uses as the bacterium has GRAS status and devoid of endotoxin as compared to other Gram-negative bacteria.     

Enzymatic Hydrolysis of Black Liquor Xylan by a Novel Xylose-Tolerant,Thermostable β-Xylosidase from a Tropical Strain of <Emphasis Type="Italic">Aureobasidium pullulans</Emphasis> CBS 135684

From three cell-associated β-xylosidases produced by Aureobasidium pullulans CBS 135684, the principal enzyme was enriched to apparent homogeneity and found to be active at high temperatures (60–70 °C) over a pH range of 5–9 with a specific activity of 163.3 units (U) mg^?1. The enzyme was thermostable, retaining over 80% of its initial activity after a 12-h incubation at 60 °C, with half-lives of 38, 22, and 10 h at 60, 65, and 70 °C, respectively. Moreover, it was tolerant to xylose inhibition with a K _i value of 18 mM. The K _m and V _max values against p-nitrophenyl-β-d-xylopyranoside were 5.57 ± 0.27 mM and 137.0 ± 4.8 μmol min^?1 mg^?1 protein, respectively. When combining this β-xylosidase with xylanase from the same A. pullulans strain, the rate of black liquor xylan hydrolysis was significantly improved by up to 1.6-fold. The maximum xylose yield (0.812 ± 0.015 g g^?1 dry weight) was obtained from a reaction mixture containing 10% (w/v) black liquor xylan, 6 U g^?1 β-xylosidase and 16 U g^?1 xylanase after incubation for 4 h at 70 °C and pH 6.0.     

Synthesis,crystal structure of a new tetranuclear Ni<Stack><Subscript>2</Subscript><Superscript>II</Superscript></Stack>Cu<Stack><Subscript>2</Subscript><Superscript>II</Superscript></Stack> complex containing a macrocyclic ligand

The first inorg/organic hybrid complex incorporating the macrocyclic oxamide, of formula [(NiL)₂Cu₂(μ-NSC)₂(NSC)₂] (1), (NiL, H₂L = 2, 3-dioxo-5,6,14,15-dibenzo-1,4,8,12-tetraazacyclo-pentadeca-7,13-dien), have been synthesized and structurally characterized. The crystals crystallize in the triclinic system, space group P-1, for (1) a = 8.319(3) Å, b = 10.434(4) Å, c = 14.166(5) Å, a = 107.030(5)°, β  =  91.257(5)°, γ = 107.623(5)°. The complex involved both bridging N, S-ligand, and oxamide ligand, C–H?S interactions and NCS → Ni weak coordination interactions making the complex superamolecular.     

Purification and characterization of an extracellular lipolytic enzyme from the fermented fish-originated halotolerant bacterium, <Emphasis Type="Italic">Virgibacillus alimentarius</Emphasis> LBU20907

A halotolerant Virgibacillus alimentarius LBU20907 isolated from fermented fish (Budu) was found to be an efficient producer of extracellular halophilic lipase enzyme. The enzyme was purified 5.99-fold with a 0.15% final yield to homogeneity by ammonium sulfate precipitation, followed by dialysis, Toyopearl DEAE-650 M ion exchange chromatography, Toyopearl butyl-650 M hydrophobic interaction chromatography, and Toyopearl-HW 55 F gel filtration chromatography. SDS-PAGE of purified lipase exhibited a homogenous single band with a very high molecular weight of 100 kDa. The properties of purified lipase revealed maximum activity at pH 7.0 and 40 °C. It was also highly stable in a pH range of 6.0–7.0, retaining more than 90% activity for 24 h. It was stable at the temperature of 30–50 °C and maintained more than 80% activity for 16 h. The purified lipase performing the maximal activity in the presence of 20.0% NaCl indicated halophilic enzyme properties. Its lipolytic activity was highest against p-nitrophenyl palmitate. The lipase activity was found to be enhanced in hexane. The enzyme activity was stimulated in the presence of Zn²⁺, Ca²⁺, Mg²⁺, and Sr²⁺; while, it was completely inhibited by Ba²⁺ and Co²⁺. The enzyme had a K _m and V _max of 108.0 mg and 79.1 U mL^?1, respectively.     

Engineering <Emphasis Type="Italic">Pichia pastoris</Emphasis> for Efficient Production of a Novel Bifunctional <Emphasis Type="Italic">Strongylocentrotus purpuratus</Emphasis> Invertebrate-Type Lysozyme

Lysozymes are known as ubiquitously distributed immune effectors with hydrolytic activity against peptidoglycan, the major bacterial cell wall polymer, to trigger cell lysis. In the present study, the full-length cDNA sequence of a novel sea urchin Strongylocentrotus purpuratus invertebrate-type lysozyme (sp-iLys) was synthesized according to the codon usage bias of Pichia pastoris and was cloned into a constitutive expression plasmid pPIC9K. The resulting plasmid, pPIC9K-sp-iLys, was integrated into the genome of P. pastoris strain GS115. The bioactive recombinant sp-iLys was successfully secreted into the culture broth by positive transformants. The highest lytic activity of 960 U/mL of culture supernatant was reached in fed-batch fermentation. Using chitin affinity chromatography and gel-filtration chromatography, recombinant sp-iLys was produced with a yield of 94.5 mg/L and purity of >?99%. Recombinant sp-iLys reached its peak lytic activity of 8560 U/mg at pH 6.0 and 30 °C and showed antimicrobial activities against Gram-negative bacteria (Vibrio vulnificus, Vibrio parahemolyticus, and Aeromonas hydrophila) and Gram-positive bacteria (Staphylococcus aureus and Bacillus subtilis). In addition, recombinant sp-iLys displayed isopeptidase activity which reached the peak at pH 7.5 and 37 °C with the presence of 0.05 M Na⁺. In conclusion, this report describes the heterologous expression of recombinant sp-iLys in P. pastoris on a preparative-scale, which possesses lytic activity and isopeptidase activity. This suggests that sp-iLys might play an important role in the innate immunity of S. purpuratus.     

Resolution Mechanism and Characterization of an Ammonium Chloride-Tolerant,High-Thermostable,and Salt-Tolerant Phenylalanine Dehydrogenase from <Emphasis Type="Italic">Bacillus halodurans</Emphasis>

As phenylalanine dehydrogenase (PheDH) plays an important role in the synthesis of chiral drug intermediates and detection of phenylketonuria, it is significant to obtain a PheDH with specific and high activity. Here, a PheDH gene, pdh, encoding a novel BhPheDH with 61.0% similarity to the known PheDH from Microbacterium sp., was obtained. The BhPheDH showed optimal activity at 60 °C and pH 7.0, and it showed better stability in hot environment (40–70 °C) than the PheDH from Nocardia sp. And its activity and thermostability could be significantly increased by sodium salt. After incubation for 2 h in 3 M NaCl at 60 °C, the residual activity of the BhPheDH was found to be 1.8-fold higher than that of the control group (without NaCl). The BhPheDH could tolerate high concentration of ammonium chloride and its activity could be also enhanced by the high concentration of ammonium salts. These characteristics indicate that the BhPheDH possesses better thermostability, ammonium chloride tolerance, halophilic mechanism, and high salt activation. The mechanism of thermostability and high salt tolerance of the BhPheDH was analyzed by molecular dynamics simulation. These results provide useful information about the enzyme with high-temperature activity, thermostability, halophilic mechanism, tolerance to high concentration of ammonium chloride, higher salt activation and enantio-selectivity, and the application of molecular dynamics simulation in analyzing the mechanism of these distinctive characteristics.     

Nonaqueous CE for Rapid and Sensitive Determination of Matrine and Oxymatrine in <Emphasis Type="Italic">Sophora flavescens</Emphasis> and Its Medicinal Preparations

A simple, rapid, and sensitive non-aqueous capillary electrophoresis procedure for the quantitative determination of matrine and oxymatrine is established. Optimum separation conditions were obtained when the sample was injected under pressure for 3 s at 50 mbar and separated with the buffer containing 70 mM ammonium acetate, 7.0% (v/v) acetic acid, and 10% (v/v) acetonitrile in methanol medium at 25 kV applied voltage. The analytes were detected at 205 nm. The two alkaloids can be separated within 12 min and quantified with high sensitivity. The method was validated in terms of reproducibility, linearity, and accuracy when applied to the analysis of matrine and oxymatrine in Sophora flavescens and its medicinal preparations.     

Functional Characterization of a Marine <Emphasis Type="Italic">Bacillus</Emphasis> Esterase and its Utilization in the Stereo-Selective Production of D-Methyl Lactate

Chiral lactic acid and its ester derivatives are crucial building blocks and platforms in the generation of high value-added drugs, fine chemicals and functional materials. Optically pure D-lactic acid and its ester derivatives cannot be directly generated from fermentation and are quite expensive. Herein, we identified, heterologously expressed and functionally characterized one Bacillus esterase BSE01701 from the deep sea of the Indian Ocean. Esterase BSE01701 could enzymatically resolve inexpensive racemic methyl lactate and generate chiral D-methyl lactate. The enantiomeric excess of desired chiral D-methyl lactate and the substrate conversion could reach over 99 % and 60 %, respectively, after process optimization. Notably, the addition of 60 % (v/v) organic co-solvent heptane could greatly improve both the enantiomeric excess of D-methyl lactate and the conversion. BSE01701 was a very promising marine microbial esterase in the generation of chiral chemicals in industry.     

A family of four-step trigonometrically-fitted methods and its application to the schrödinger equation

In this article we present a singularly almost P-stable exponentially-fitted four-step method for the approximate solution of the one-dimensional Schrödinger equation. More specifically we present a method that is singularly almost P-stable (a concept later introduced in this article) and also integrates exactly any linear combination of the functions {1, x, exp ( ±I v x) , x exp ( ±I v x) , x ² exp ( ±I v x)}. The numerical experimentation showed that our method is considerably more efficient compared to well known methods used for the approximate solution of resonance problem of the radial Schrödinger equation.     

Bamboo (<Emphasis Type="Italic">Phyllostachys pubescens</Emphasis>) as a Natural Support for Neutral Protease Immobilization

Lignin polymers in bamboo (Phyllostachys pubescens) were decomposed into polyphenols at high temperatures and oxidized for the introduction of quinone groups from peroxidase extracted from bamboo shoots and catalysis of UV. According to the results of FT-IR spectra analysis, neutral proteases (NPs) can be immobilized on the oxidized lignin by covalent bonding formed by amine group and quinone group. The optimum condition for the immobilization of NPs on the bamboo bar was obtained at pH 7.0, 40 °C, and duration of 4 h; the amount of immobilized enzyme was up to 5 mg g^?1 bamboo bar. The optimal pH for both free NP (FNP) and INP was approximately 7.0, and the maximum activity of INP was determined at 60 °C, whereas FNP presented maximum activity at 50 °C. The K_m values of INP and FNP were determined as 0.773 and 0.843 mg ml^?1, respectively; INP showed a lower K_m value and V_max, than FNP, which demonstrated that INP presented higher affinity to substrate. Compared to FNP, INP showed broader thermal and storage stability under the same trial condition. With respect to cost, INP presented considerable recycling efficiency for up to six consecutive cycles.     

Elucidating the Effect of Glycerol Concentration and C/N Ratio on Lipid Production Using <Emphasis Type="Italic">Yarrowia lipolytica</Emphasis> SKY7

The high demand for renewable energy and increased biodiesel production lead to the surplus availability of crude glycerol. Due to the above reason, the bio-based value addition of crude glycerol into various bioproducts is investigated; among them, microbial lipids are attractive. The present study was dedicated to find the optimal glycerol concentration and carbon/nitrogen (C/N) ratio to produce maximum lipid using Yarrowia lipolytica SKY7. The glycerol concentration (34.4 to168.2 g/L) and C/N ratio (25 to 150) were selected to investigate to maximize the lipid production. Initial glycerol concentration 112.5 g/L, C/N molar ratio of 100, and with 5 % v/v inoculum supplementation were found to be optimum for biomass and lipid production. Based on the above optimal parameters, lipid concentration of 43.8 % w/w with a biomass concentration of 14.8 g/L was achieved. In the case of glycerol concentration, the maximum Yp/s (0.192 g/g); Yx/s (0.43 g/g) was noted when the initial glycerol concentration was 112.5 g/L with C/N molar ratio 100 and inoculum volume 5 % v/v. The glycerol uptake was also noted to increase with the increase in glycerol concentration. At low C/N ratio, the glycerol consumption was found to be high (79.43 g/L on C/N 25) whereas the glycerol consumption was observed to decrease when the C/N ratio was raised to 150 (40.8 g/L).     

Radiolabeling of gemifloxacin with technetium-99m and biological evaluation in artificially <Emphasis Type="Italic">Streptococcus pneumoniae</Emphasis> infected rats

In the current investigation complexation of the gemifloxacin (GIN) with technetium-99 m (^99mTc) and its biological evaluation in artificially Streptococcus pneumoniae (S. pneumoniae) infected rats was assessed as potential S. pneumoniae infection radiotracer. Radiochemically the ^99mTc-GIN complex was further analyzed in terms of stability in saline, in vitro stability in serum at 37 °C, in vitro binding with S. pneumoniae and biodistribution in artificially S. pneumoniae (living and heat killed) infected rats. The complex was found 97.25 ± 0.25% radiochemically stable in saline at 30 min after reconstitution. The stability of the ^99mTc-GIN complex was decreased to 90.50 ± 0.20% within 240 min after reconstitution. In serum the ^99mTc-GIN complex showed stable profile with the appearance of 18.85% free tracer within 16 h of incubation. The ^99mTc-GIN complex showed saturated in vitro binding with S. pneumoniae after different intervals. Almost five fold uptake was observed in living S. pneumoniae infected muscle of the rats as compared to the inflamed and normal muscle. No significant difference in the uptake of heat killed S. pneumoniae infected, inflamed and normal muscles of the rats. The high RCP yield in saline, in vitro permanence in serum, in vitro binding with living S. pneumoniae and biodistribution in artificially S. pneumoniae infected rats we recommend the ^99mTc-GIN as potential S. pneumoniae infection radiotracer.