Interaction of ethylene oxide-propylene oxide copolymers with ionic surfactants studied by calorimetry: random versus block copolymers

The present study used calorimetric techniques to follow the interaction of random and block ethylene oxide (EO)-propylene oxide (PO) copolymers with ionic surfactants. Features such as the intensity of the interaction (evaluated through their critical aggregation concentrations) and the profile of the isothermal titration calorimetry (ITC) curves were comparatively analyzed for random and block copolymers with similar composition (number of EO and PO units). Random copolymers displayed an interaction similar to that observed with other hydrophilic homopolymers with the additional characteristic that the intensity of the interaction increased with the increase in the copolymer hydrophobicity (as determined by its PO content), revealing that these copolymers display an intermediate behavior between PEO and PPO. For nonaggregated block copolymers (unimers) with large enough EO blocks (molar mass above 2000 g mol-1), ITC curves revealed that the anionic surfactant sodium dodecylsulfate (SDS) interacts with the PO and EO blocks almost independently, being more favorable with the PO block, which controls the critical aggregation concentration (cac) value. Effects of temperature and of the nature of the ionic surfactants on their interaction with these copolymers were found to agree with the previously reported trends.     

The effects of the addition of the polyelectrolyte, poly(ethyleneimine), on the adsorption of mixed surfactants of sodium dodecylsulfate and dodecyldimethylaminoacetate at the air-water interface

The effects of the addition of the polyelectrolyte, poly(ethyleneimine), PEI, on the adsorption of the mixed surfactants of sodium dodecylsulfate, SDS, and dodecyldimethylaminoacetate, dodecyl betaine, at the air-water interface have been investigated using neutron reflectivity and surface tension. In the absence of PEI the SDS and dodecyl betaine surfactants strongly interact and exhibit synergistic adsorption at the air-water interface. The addition of PEI, at pH 7 and 10, results in a significant modification of the surface partitioning of the SDS/dodecyl betaine mixture. The strong surface interaction at high pH (pH 7 and 10) between the PEI and SDS dominates the surface behavior. For solution compositions in the range 20/80-80/20 mol ratio dodecyl betaine/SDS at pH 7 the surface composition is strongly biased towards the SDS. At pH 10 a similar behavior is observed for a solution composition of 50/50 mol ratio dodecyl betaine/SDS. This strong partitioning in favor of the SDS at high pH is attributed to the strong ion-dipole attraction between the SDS sulfate and the PEI imine groups. At pH 3, where the electrostatic interactions between the surfactant and the PEI are dominant, the dodecyl betaine more effectively competes with the SDS for the interface, and the surface composition is much closer to the solution composition.     

Binding of sodium dodecyl sulfate and hexaethylene glycol mono-n-dodecyl ether to the block copolymer L64: electromotive force, microcalorimetry, surface tension, and small angle neutron scattering investigations of mixed micelles and polymer/micellar surfactant complexes

The interactions of sodium dodecyl sulfate (SDS) with the triblock copolymer L64 (EO13-PO30-EO13) and hexaethylene glycol mono-n-dodecyl ether (C12EO6) were studied using electromotive force, isothermal titration microcalorimetry, differential scanning microcalorimetry, and surface tension measurements. In certain regions of binding, mixed micelles are formed, and here we could evaluate an interaction parameter using regular solution theory. The mixed micelles of L64 with both SDS and C12EO6 exhibit synergy. When L64 is present in its nonassociated state, it forms polymer/micellar SDS complexes at SDS concentrations above the critical aggregation concentration (cac). The cac is well below the critical micellar concentration (cmc) of pure SDS, and a model suggesting how bound micelles are formed at the cac in the presence of a polymer is described. The interaction of nonassociated L64 with C12EO6 is a very rare example of strong binding between a nonionic surfactant and a nonionic polymer, and C12EO6/L64 mixed micelles are formed. We also carried out small angle neutron scattering measurement to determine the structure of the monomeric polymer/micellar SDS complex, as well as the mixed L64/C12EO6 aggregates. In these experiments, contrast matching was achieved by using the h and d forms of SDS, as well as C12EO6. During the early stages of the formation of polymer-bound SDS micelles, SDS aggregates with aggregation numbers of approximately 20 were found and such complexes contain 4-6 bound L64 monomers. The L64/C12EO6 data confirmed the existence of mixed micelles, and structural information involving the composition of the mixed micelle and the aggregation numbers were evaluated.     

Micellar Interactions in Nonionic/Ionic Mixed Surfactant Systems

To study the influence of the chemical nature of headgroups and the type of counterion on the process of micellization in mixed surfactant systems, the cmc's of several binary mixtures of surfactants with the same length of hydrocarbon tail but with different headgroups have been determined as a function of the monomer composition using surface tension measurements. Based on these results, the interaction parameter between the surfactant species in mixed micelles has been determined using the pseudophase separation model. Experiments were carried out with (a) the nonionic/anionic C(12)E(6)/SDS ((hexa(ethyleneglycol) mono-n-dodecyl ether)/(sodium dodecyl sulfate)), (b) amphoteric/anionic DDAO/SDS ((dodecyldimethylamine oxide)/(sodium dodecyl sulfate)), and (c) amphoteric/nonionic C(12)E(6)/DDAO mixed surfactant systems. In the case of the mixed surfactant systems containing DDAO, experiments were carried out at pH 2 and pH 8 where the surfactant was in the cationic and nonionic form, respectively. It was shown that the mixtures of the nonionic surfactants with different kinds of headgroups exhibit almost ideal behavior, whereas for the nonionic/ionic surfactant mixtures, significant deviations from ideal behavior (attractive interactions) have been found, suggesting binding between the head groups. Molecular orbital calculations confirmed the existence of the strong specific interaction between (1) SDS and nonionic and cationic forms of DDAO and between (2) C(12)E(6) and the cationic form of DDAO. In the case for the C(12)E(6)/SDS system, an alternative mechanism for the stabilization of mixed micelles was suggested, which involved the lowering in the free energy of the hydration layer. Copyright 2000 Academic Press.     

Organization of amphiphiles: XII. Evidence in favor of formation of hydrophobic complexes in aqueous solution

The effects of nonionic surfactants OP-10 and OP-30 (polyoxyethylated octyl phenols with 10 and 30 oxyethylene groups, respectively) in surfactant mixtures with ionic surfactants hexadecyltrimethylammonium bromide (CTAB) and sodium dodecyl sulphate (SDS) have been investigated by a conductometric method in conjunction with fluorescence, surface tension, zeta potential, and DLS measurements. The interactions are found to be antagonistic in nature for each of the systems; i.e., micellization of CTAB as well as SDS is hindered on addition of the nonionic surfactants. The antagonism is found to be more prominent in the presence of OP-10 compared to that of OP-30. Two types of mechanistic paths, path A operating below the critical micellar concentration and path B operating beyond the critical micellar concentration of nonionic surfactants, have been suggested. In path A, the retardation in micellization has been attributed to a decrease in monomeric concentration of the ionic surfactants from solution as a result of the formation of a hydrophobic complex between nonionic and ionic surfactants. In path B, the decrease in monomer concentration is due to the solubilization of the ionic surfactant in micelles of the nonionic surfactants in a 1:1 stoichiometric ratio. A theoretical treatment to the interaction in each ionic-nonionic pair yields a positive value of the interaction parameter supporting the concept of antagonism. The formation of the hydrophobic complex is supported by fluorescence and surface tension measurements. A schematic representation of the stabilization of these hydrophobic complexes has been suggested. The association of ionic surfactants by nonionic micelles is suggested by zeta potential and DLS studies.     

Micellar Behavior of Polystyrene-Poly(Ethylene Oxide) Diblock Copolymers in Aqueous Media: Effect of Copolymer Composition,Temperature, Salt,and Surfactants

Formation and structure of micelles from two amphiphilic polystyrene-block-poly(ethylene oxide) (PS-PEO) diblock copolymers (PS mol.wt. 1000; PEO mol.wt. 3000 and 5000) were examined by surface tension, viscosity, steady state fluorescence, dynamic light scattering (DLS), small angle neutron scattering (SANS), and cryo-transmission electron microscopy (cryo-TEM). The critical micelle concentration (CMC) of the copolymers in aqueous solution was ca. 0.05%; micelle hydrodynamic diameter was 30–35 nm with a narrow size distribution. SANS studies show that the copolymers form ellipsoidal micelles with semi major axis ～23 nm and semi minor axis ～8 nm. No significant change in the structure was found with temperature and presence of salt. The copolymer micelles interaction with the ionic surfactants sodium dodecyl sulphate (SDS) and dodecyltrimethylammonium bromide (DTAB) was also examined by DLS and SANS.     

Clouding and Hydrodynamic Behavior of Pluronic-Surfactant Interaction in Aqueous Salt Solutions

Clouding behavior of PEO-PPO-PEO and PPO-PEO-PPO block copolymers were studied in presence of sodium dodecyl sulfate (SDS) and NaCl. Extensive study of Pluronic P84 (EO₁₉PO₄₃EO₁₉) with different salts and ionic surfactants, were carried out using cloud point, viscosity and dynamic light scattering (DLS) measurements. The change in cloud point, as well as the size of P84 micelles in aqueous salt solution obeys the Hofmeister lyotropic series. Results on P84-ionic surfactant mixture indicate stronger interaction in case of SDS compared to those in presence of dodecyl trimethylammonium chloride (DTAC); here interaction seems to diminish in the presence of salts.     

Interaction of Nonionic Surfactant Triton-X-100 with Ionic Surfactants

The interaction in two mixtures of a nonionic surfactant Triton-X-100 (TX-100) and different ionic surfactants was investigated. The two mixtures were TX-100/sodium dodecyl sulfate (SDS) and TX-100/cetyltrimethylammonium bromide (CTAB) at molar fraction of TX-100, α_TX-100 = 0.6. The surface properties of the surfactants, critical micelle concentration (CMC), effectiveness of surface tension reduction (γ_CMC), maximum surface excess concentration (Γ_max), and minimum area per molecule at the air/solution interface (A _min) were determined for both individual surfactants and their mixtures. The significant deviations from ideal behavior (attractive interactions) of the nonionic/ionic surfactant mixtures were also determined. Mixtures of both TX-100/SDS and TX-100/CTAB exhibited synergism in surface tension reduction efficiency and mixed micelle formation, but neither exhibited synergism in surface tension reduction effectiveness.     

Adsorption of nonionic mixtures at the air-water interface: effects of temperature and electrolyte

Specular neutron reflection has been used to investigate the effects of temperature and added electrolyte on the adsorption of nonionic surfactants and nonionic surfactant mixtures at the air-water interface. For the alkyl poly-oxyethylene oxide nonionic surfactants, C(n)EO(m), the adsorption at the air-water interface is independent of temperature for surfactants with shorter ethylene oxide groups, whereas there is an increasing tendency for increased adsorption with temperature for surfactants with longer ethylene oxide groups. The addition of "salting in" (sodium thiocyanate, NaSCN) and "salting out" (sodium chloride, NaCl, sodium sulphate, Na2SO4) electrolyte results in reduced and enhanced adsorption, respectively, for C12EO8, whereas both types of electrolyte result in enhanced adsorption for C12EO12. The addition of electrolyte does not substantially alter the temperature dependence of the adsorption of the pure monolayers. For the nonionic mixtures of C12EO3/C12EO8 increasing temperature results in a surface richer in the least surface-active component, C12EO8. For the same nonionic mixture, the addition of "salting in" and "salting out" electrolyte results in an reduced and increased adsorption, respectively. The addition of "salting in" electrolyte results in a surface more rich in C12EO3, whereas for the addition of both "salting in" and "salting out" electrolyte the surface composition is essentially unaltered.     

Effect of SDS on the self-assembly behavior of the PEO-PPO-PEO triblock copolymer (EO)20(PO)70(EO)20

The mixed micellar system comprising the poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide)-based triblock copolymer (EO)(20)(PO)(70)(EO)(20) (P123) and the anionic surfactant sodium dodecyl sulfate (SDS) has been investigated in aqueous media by small-angle neutron scattering (SANS) and viscosity measurements. The aggregation number of the copolymer in the micelles decreases upon addition of SDS, but a simultaneous enhancement in the degree of micellar hydration leads to a significant increase in the micellar volume fraction at a fixed copolymer concentration. This enhancement in the micellar hydration leads to a marked increase in the stability of the micellar gel phase until it is destroyed at very high SDS concentration. Mixed micellar systems with low and intermediate SDS concentrations form the micellar gel phase in much wider temperature and copolymer concentration ranges than the pure copolymer micellar solution. A comparison of the observed results with those for the copolymers (EO)(26)(PO)(40)(EO)(26) (P85) and (EO)(99)(PO)(70)(EO)(99) (F127) suggests that the composition of the copolymers plays a significant role in determining the influence of SDS on the gelation characteristics of the aqueous copolymer solutions. Copolymers with high PO/EO ratios show an enhancement in the stability of the gel phase, whereas copolymers with low PO/EO ratios show a deterioration of the same in the presence of SDS.     

PEP与阴离子表面活性剂复配体系泡沫性能的研究

研究了PEP型非离子表面活性剂分别与十二烷基苯磺酸钠（DBS）,十二烷基硫酸钠（SDS）形成复配体系的泡沫性能,讨论了浓度及配比的变化对泡沫性能的影响,结果表明起泡性和稳泡性皆随混合表面活性剂的浓度的上升而增强;在一定浓度下,随着PEP比例下降,起泡性和稳泡性也随着增大,并达到稳定值。     

Effect of surfactant type on surfactant-maltodextrin interactions: isothermal titration calorimetry, surface tensiometry, and ultrasonic velocimetry study

Isothermal titration calorimetry (ITC), surface tensiometry, and ultrasonic velocimetry were used to characterize surfactant-maltodextrin interactions in buffer solutions (pH 7.0, 10 mM NaCl, 20 mM Trizma base, 30.0 degrees C). Experiments were carried out using three surfactants with similar nonpolar tail groups (C12) but different charged headgroups: anionic (sodium dodecyl sulfate, SDS), cationic (dodecyl trimethylammonium bromide, DTAB), and nonionic (polyoxyethylene 23 lauryl ether, Brij35). All three surfactants bound to maltodextrin, with the binding characteristics depending on whether the surfactant headgroup was ionic or nonionic. The amounts of surfactant bound to 0.5% w/v maltodextrin (DE 5) at saturation were < 0.3 mM Brij35, approximately 1-1.6 mM SDS, and approximately 1.5 mM DTAB. ITC measurements indicated that surfactant binding to maltodextrin was exothermic. Surface tension measurements indicated that the DTAB-maltodextrin complex was more surface active than DTAB alone but that SDS- and Brij35- maltodextrin complexes were less surface active than the surfactants alone.     

Equilibrium surface adsorption behavior in complex anionic/nonionic surfactant mixtures

Neutron reflectivity (NR) and small angle neutron scattering (SANS) have been used to investigate the equilibrium surface adsorption behavior and the solution microstructure of mixtures of the anionic surfactant sodium 6-dodecyl benzene-4 sulfonate (SDBS) with the nonionic surfactants monododecyl octaethylene glycol (C12EO8) and monododecyl triiscosaethylene glycol (C12EO23). In the SDBS/C12EO8 and SDBS/C12EO23 solutions, small globular mixed micelles are formed. However, the addition of Ca2+ ions to SDBS/C12EO8 results in a transition to a vesicle phase or a mixed vesicle/micellar phase for SDBS rich compositions. In contrast, this transition hardly exists for the SDBS/C12EO23 mixture, and occurs only in a narrow composition region which is rich in SDBS. The adsorption of the SDBS/C12EO8 mixture at the air-solution interface is in the form of a mixed monolayer, with a composition variation that is not consistent with ideal mixing. In water and in the presence of NaCl, the nonideality can be broadly accounted for by regular solution theory (RST). At solution compositions rich in SDBS, the addition of Ca2+ ions results in the formation of multilayer structures at the interface. The composition range over which multilayer formation exists depends upon the Ca2+ concentration added. In comparison, the addition of a simple monovalent electrolyte, NaCl, at the same ionic strength does not have the same impact upon the adsorption, and the surface structure remains as a monolayer. Correspondingly, in solution, the mixed surfactant aggregates remain as relatively small globular micelles. In the presence of Ca2+ counterions, the variation in surface composition with solution composition is not well described by RST over the entire composition range. Furthermore, the mixing behavior is not strongly correlated with variations in the solution microstructure, as observed in other related systems.     

Shape and Structure Formation of Mixed Nonionic–Anionic Surfactant Micelles

Aqueous solutions of a nonionic surfactant (either Tween20 or BrijL23) and an anionic surfactant (sodium dodecyl sulfate, SDS) are investigated, using small-angle neutron scattering (SANS). SANS spectra are analysed by using a core-shell model to describe the form factor of self-assembled surfactant micelles; the intermicellar interactions are modelled by using a hard-sphere Percus–Yevick (HS-PY) or a rescaled mean spherical approximation (RMSA) structure factor. Choosing these specific nonionic surfactants allows for comparison of the effect of branched (Tween20) and linear (BrijL23) surfactant headgroups, both constituted of poly-ethylene oxide (PEO) groups. The nonionic–anionic surfactant mixtures are studied at various concentrations up to highly concentrated samples (ϕ ≲ 0.45) and various mixing ratios, from pure nonionic to pure anionic surfactant solutions. The scattering data reveal the formation of mixed micelles already at concentrations below the critical micelle concentration of SDS. At higher volume fractions, excluded volume effects dominate the intermicellar structuring, even for charged micelles. In consequence, at high volume fractions, the intermicellar structuring is the same for charged and uncharged micelles. At all mixing ratios, almost spherical mixed micelles form. This offers the opportunity to create a system of colloidal particles with a variable surface charge. This excludes only roughly equimolar mixing ratios (X≈ 0.4–0.6) at which the micelles significantly increase in size and ellipticity due to specific sulfate–EO interactions.     

Effect of ionic surfactants on the hydration behavior of triblock copolymer micelles: a solvation dynamics study of coumarin 153

Dynamic fluorescence Stokes shift measurements of coumarin 153 (C153) have been carried out to study the influence of ionic surfactants (sodium dodecyl sulfate, SDS and hexadecyltrimethylammonium chloride, CTAC) on the hydration behavior of aqueous poly(ethylene oxide)(20)-poly(propylene oxide)(70)-poly(ethylene oxide)20 (P123) block copolymer micelles. Increase in SDS or CTAC concentration at a fixed P123 concentration induces the steady-state emission spectra of C153 to shift gradually toward lower energy. This is attributed to an increase in polarity (due to enhanced hydration) experienced by the probe as a consequence of incorporation of ionic head groups in the Corona region. The observed dynamic fluorescence Stokes shift value decreases more in mixed micellar systems than in pure copolymer micelles and the trends are quite similar in the presence of SDS and CTAC. The spectral shift correlation functions were observed to be nonexponential in nature. Critical analysis of the spectral shift correlation function indicates a fast solvation component (<0.2 ns) in P123 micelles, which was absent in the presence of ionic surfactants. Due to increased hydration in the presence of ionic surfactants, the initial fast solvation event was elusive in mixed copolymer-surfactant systems, reflecting the absence of faster solvation component and reduced observed Stokes shift in mixed systems. It has been argued that in the low surfactant concentration region, increase in hydration with the incorporation of ionic head groups in the Corona region is mainly due to increase in mechanically trapped water content. However, at higher surfactant concentrations, bound water content dominates and leads to slower solvation dynamics. The present results also indicate that though CTAC alters the Corona hydration more efficiently than SDS, the overall influence of ionic surfactants on the Corona hydration is grossly similar irrespective of the cationic or anionic nature of the surfactants. Interaction of SDS and CTAC with poly(ethylene oxide)(100)-poly(propylene oxide)(70)-poly(ethylene oxide)(100) (F127) block copolymer micelles has also been studied to comprehend the effect of copolymer composition. The overall trends in dynamic fluorescence Stokes shift and solvation times are similar in both the copolymer micelles.     

Binding of sodium dodecyl sulfate to linear and star homopolymers of the nonionic poly(methoxyhexa(ethylene glycol) methacrylate) and the polycation poly(2-(dimethylamino)ethyl methacrylate): electromotive force, isothermal titration calorimetry, surface tension, and small-angle neutron scattering measurements

We investigated the binding of sodium dodecyl sulfate (SDS) to various linear and star polymers of the nonionic methoxyhexa(ethylene glycol) methacrylate (PMHEGMA) and the ionic 2-(dimethylamino)ethyl methacrylate (PDMAEMA), the latter being a polycation at low pH. The dodecyl sulfate ion selective electrode (EMF), isothermal titration calorimetry (ITC), and surface tension (ST) were applied to gain detailed information about interactions. In all cases there is evidence of significant binding of SDS over an extensive SDS concentration range spanning from ca. 10(-6) to 0.1 mol dm(-3). At pH 3, the polymer PDMAEMA is a strong polycation and here the binding is dominated by electrostatic 1:1 charge neutralization with the anionic surfactant. At their natural pH of 8.6, PMHEGMA and PDMAEMA polymers are essentially nonionic and bind SDS in the form of polymer-bound aggregates in the concentration range of ca. 1 x 10(-3) to 3 x 10(-2) mol dm(-3). All the polymers also bind SDS to a lesser extent at concentrations below 1 x 10(-3) mol dm(-3) reaching as low as 10(-7) mol dm(-3). This low concentration binding process involves the polymer and nonassociated SDS monomers. As far as we are aware, this is the first example that such a low concentration noncooperative binding process could be observed in SDS/neutral polymer systems by EMF and ST. We also showed that the nonionic surfactant hexa(ethylene glycol) mono-n-dodecyl ether (C12EO6) and the cationic cetyltrimethylammonium bromide (C16TAB) interact with star PDMAEMA. We believe that the interaction of C12EO6 and CTAB is of similar noncooperative type as the first SDS binding process in the range from ca. 10(-5) to 0.3 x 10(-3) mol dm(-3). At the high concentration binding limit Csat of SDS, the above polymers become fully saturated with bound SDS micelles. We applied small angle neutron scattering (SANS) to determine the structure and aggregation numbers of the star polymer/bound SDS micelles and calculated the stoichiometry of such supramolecular complexes. The SANS data on PDMAEMA star polymers in the presence of C12EO6 showed only a limited monomer binding in contrast to linear PDMAEMA, which showed monomer C12EO6 binding at low concentrations but micellar aggregates at 6 x 10(-3) mol dm(-3).     

Aggregation of ionic surfactants to block copolymer assemblies: a simple fluorescence spectral study

A simple and elegant method based on steady-state fluorescence spectral measurement is demonstrated to study the interaction mechanism of copolymers and ionic surfactants with a suitable selection of fluorescent probe and also its general applicability in studying other systems. Three different concentration regions have been indicated from the changes in full width at half-maximum of the emission spectra and fluorescence intensity of coumarin 153 with the molar ratio of ionic surfactant to triblock copolymer (n). At low n values, copolymer-surfactant complexes are basically copolymer-rich micelles with few surfactant molecules, and at very high n values, copolymer-rich micelles are destroyed and surfactant-rich micelles with free copolymer monomers are formed. It has been observed that, in the intermediate surfactant concentration region, the transformation of a dominantly copolymer-rich complex to a mainly surfactant-rich complex can be either gradual incorporation of surfactants into the copolymer-rich micelles with freeing of copolymer units until surfactant-rich micelles are formed (type I) or simultaneous buildup of surfactant-rich micelles together with the destruction of copolymer-rich micelles (type II). The interaction mechanism for nonionic copolymers (P123 and F127) with ionic surfactants (SDS and CTAC) is mainly type II, but at higher copolymer concentrations interaction via the type I mechanism also operates. However, it is dominantly the type I mechanism that operates for common nonionic (TX100) and ionic surfactants.     

Size-dependent interaction of silica nanoparticles with different surfactants in aqueous solution

The size-dependent interaction of anionic silica nanoparticles with ionic (anionic and cationic) and nonionic surfactants has been studied using small-angle neutron scattering (SANS). The surfactants used are anionic sodium dodecyl sulfate (SDS), cationic dodecyltrimethyl ammonium bromide (DTAB), and nonionic decaoxyethylene n-dodecylether (C(12)E(10)). The measurements have been carried out for three different sizes of silica nanoparticles (8, 16, and 26 nm) at fixed concentrations (1 wt % each) of nanoparticles and surfactants. It is found that irrespective of the size of the nanoparticles there is no significant interaction evolved between like-charged nanoparticles and the SDS micelles leading to any structural changes. However, the strong attraction of oppositely charged DTAB micelles with silica nanoparticles results in the aggregation of nanoparticles. The number of micelles mediating the nanoparticle aggregation increases with the size of the nanoparticle. The aggregates are characterized by fractal structure where the fractal dimension is found to be constant (D ≈ 2.3) independent of the size of the nanoparticles and consistent with diffusion-limited-aggregation-type fractal morphology in these systems. In the case of nonionic surfactant C(12)E(10), micelles interact with the individual silica nanoparticles. The number of adsorbed micelles per nanoparticle increases drastically whereas the percentage of adsorbed micelles on nanoparticles decreases with the increase in the size of the nanoparticles.     

Preparation of stable electroneutral nanoparticles of sodium dodecyl sulfate and branched poly(ethylenimine) in the presence of pluronic F108 copolymer

Mixing of polyelectrolyte solutions with solutions of oppositely charged surfactants usually leads to phase separation in a certain concentration range. However, since the charge-neutralized polyelectrolyte/surfactant nanoparticles might be utilized as versatile nanocarriers of different substances, it would be desirable to prevent their aggregation for some applications. As it was revealed in earlier investigations, the complete suppression of precipitation may be achieved only in mixtures of ionic surfactants and appropriate copolymer polyelectrolytes with nonionic and ionic blocks. In this work, we present a method that could prevent phase separation in mixtures of homopolyelectrolytes and oppositely charged surfactants. Specifically, it is shown that nonaggregating electroneutral nanocomplexes of branched poly(ethylenimine) (PEI) and sodium dodecyl sulfate (SDS) can be prepared in the presence of the amphiphilic triblock copolymer Pluronic F108, provided that an adequate mixing protocol is used for preparation of the PEI/SDS/F108 mixtures.     

Adsorption of nonionic surfactant mixtures at the hydrophilic solid-solution interface

The adsorption of the mixed nonionic surfactants, monododecyl triethylene glycol (C2EO3) and monododecyl octaethylene glycol (C12EO8), at the hydrophilic silica-solution interface has been studied by specular neutron reflectivity. The adsorption at the solid-solution interface is compared with that previously measured at the air-solution interface. The marked differences that are observed are explained in terms of the different packing constraints or preferred curvature arising from the disparity in the respective headgroup dimensions.