Synthesis and proton conductivity studies of azole functional organic electrolytes

As an attempt to produce azole functional proton conductors, organic electrolytes with triazole and tetrazole functional groups were synthesized via substitution reaction of 1,3,5-benzenetricarbonyl trichloride with aminotriazole and aminotetrazole. The samples were doped with triflic acid with molar ratios of 0.25 and 0.50. FTIR, nuclear magnetic resonance (NMR), and elemental analysis were used to characterize the resulting materials. Thermogravimetric analysis showed that the samples are thermally stable up to 150?°C. The effect of acid doping on proton conductivity was investigated with impedance spectrometer. Both pure samples and the doped ones revealed high proton conductivity. In anhydrous conditions (TMA)-TriTA_0.50 and TMA-TetTA_0.50 have proton conductivities of 1.8 and 19?mS/cm at 150?°C, respectively. Solid-state NMR studies revealed that there are three different types of hydrogen-bonded acidic proton in the systems. Moreover, these different types of acidic protons present at different ratio in triazole and tetrazole systems.     

Effect of molecular weight on conductivity of polymer electrolytes

The ionic conductivity, σ, of mixtures of poly(ethylene oxide) (PEO) and lithium bis(trifluoromethanesulfone)imide (LiTFSI) was measured as a function of molecular weight of the PEO chains, M, over the range 0.2-5000 kg/mol. Our data are consistent with an expression σ = σ₀ + K/M proposed by Shi and Vincent [Solid State Ionics 60 (1993)] where σ₀ and K are exponential and linear functions of inverse temperature respectively. Explicit expressions for σ₀ and K are provided.     

Dielectric and conductivity relaxations in PVAc based polymer electrolytes

The polymer electrolytes composed of a blend of poly (vinyl acetate) (PVAc) and poly (methylmethacrylate) (PMMA) as a host polymer and LiClO₄ as a salt are prepared by a solution casting technique. The formation of blend polymer- salt complex has been confirmed by FT-IR spectral studies. The conductivity- temperature plots are found to follow an Arrhenius nature. Arrhenius plot shows the decrease in activation energy with the increase in salt concentration. The dielectric behaviour of the sample is analysed using dielectric permittivity (ε′), dielectric loss (ε″) and electric modulus (M″) of the samples. The impedance cole- cole plot shows the high frequency semi- circle is due to the bulk effect of the material and the depression in the semicircle shows the non-Debye nature of the material. The bulk conductivity is found to vary between 2.5×10⁻⁵ Scm⁻¹ to 1.7×10⁻³ Scm⁻¹ with the increase of salt concentration of blend polymer samples. The migration energy derived from the dissipation factor is almost equal to the activation energy calculated from conductivity. The modulus spectrum of the samples shows the non-Debye behaviour of the polymer electrolyte films. The low frequency dispersion of the dielectric constant implies the space charge effects arising from the electrodes. Paper presented at the 2nd International Conference on Ionic Devices, Anna University, Chennai, India, Nov. 28–30, 2003.     

Structural and ionic conductivity studies on proton conducting polymer electrolyte based on polyvinyl alcohol

An attempt has been made to prepare a new proton conducting polymer electrolyte based on polyvinyl alcohol (PVA) doped with NH₄NO₃ by solution casting technique. The complex formation between polymer and dissociated salt has been confirmed by X-ray diffraction analysis. The ionic conductivity of the prepared polymer electrolyte has been found by ac impedance spectroscopic analysis. The highest ionic conductivity has been found to be 7.5 × 10⁻³ Scm⁻¹ at ambient temperature for 20 mol% NH₄NO₃-doped PVA with low activation energy (~0.19 eV). The temperature-dependent conductivity of the polymer electrolyte follows an Arrhenius relationship, which shows hopping of ions in the polymer matrix.     

Effect of branching in base polymer on ionic conductivity in hyperbranched polymer electrolytes

Novel hyperbranched polymer, poly[bis(diethylene glycol)benzoate] capped with a 3,5-bis[(3′,6′,9′-trioxodecyl)oxy]benzoyl group (poly-Bz1a), was prepared, and its polymer electrolyte with LiN(CF₃SO₂)₂, poly-Bz1a/LiN(CF₃SO₂)₂ electrolyte, was all evaluated in thermal properties, ionic conductivity, and electrochemical stability window. The poly-Bz1a/LiN(CF₃SO₂)₂ electrolyte exhibited higher ionic conductivity compared with a polymer electrolyte based on poly[bis(diethylene glycol)benzoate] capped with an acetyl group (poly-Ac1a), and the ionic conductivity of poly-Bz1a/LiN(CF₃SO₂)₂ electrolyte was to be 7×10⁻⁴ S cm⁻¹ at 80 °C and 1×10⁻⁶ S cm⁻¹ at 30 °C, respectively. The existence of a 3,5-bis[(3′,6′,9′-trioxodecyl)oxy]benzoyl group as a branching unit present at ends in the base polymer improved significantly ionic conductivity of the hyperbranched polymer electrolytes. The polymer electrolyte exhibited the electrochemical stability window of 4.2 V at 70 °C and was stable until 300 °C.     

Effect of crystallinity on proton conductivity in yttrium-doped barium zirconate thin films

The effect of crystallinity on proton conductivity in amorphous, single crystal and polycrystal yttrium-doped barium zirconate (BYZ) thin films grown 120 nm in thickness on amorphous (quartz) and single crystal MgO(100) substrates has been studied. The conductivity was measured in the temperature range of 150 ~ 350 °C. By altering the film deposition temperature, varying degrees of crystallization and microstructure were observed by x-ray diffraction and transmission electron microscopy. The epitaxial BYZ film grown on MgO(100) substrate at 900 °C showed the highest proton conductivity among other samples with an activation energy of 0.45 eV, whereas polycrystalline and amorphous BYZ films showed lower conductivities due to grain boundaries in their granular microstructure.     

170keV质子辐照对多壁碳纳米管薄膜微观结构与导电性能的影响

碳纳米管具有优异的导电性, 是未来电子元器件的理想候选材料, 应用前景广阔. 针对碳纳米管在空间电子元器件的应用需求, 本文研究了170 keV质子辐照对多壁碳纳米管薄膜微观结构与导电性能的影响. 采用扫描电子显微镜(SEM)、拉曼光谱仪(Raman)、X射线光电子能谱仪(XPS)及电子顺磁共振谱仪(EPR)对辐照前后碳纳米管试样的表面形貌和微观结构进行分析; 利用四探针测试仪对碳纳米管薄膜进行导电性能分析. SEM分析表明, 170 keV质子辐照条件下, 当辐照注量高于5×10¹⁵ p/cm² (protons/cm²)时, 碳纳米管薄膜表面变得粗糙疏松, 纳米管发生明显弯曲、收缩及相互缠结现象. 目前, 质子辐照纳米管发生的收缩现象被首次发现. 基于Raman和XPS分析表明, 170 keV质子辐照后碳纳米管的有序结构得到改善, 且随辐照注量增加, 碳纳米管的有序结构改善明显. 结构的改善主要是由于170 keV质子辐照碳纳米管所产生的位移效应导致缺陷重组. EPR分析表明, 随着辐照注量的增加, 碳纳米管薄膜内的非局域化电子减少. 利用四探针测试分析表明, 碳纳米管薄膜的导电性能变差, 这是由于170 keV质子辐照导致碳纳米管薄膜中的电子特性及形态发生改变. 本文研究结果有助于利用质子辐照对碳纳米管膜结构和性能进行调整, 从而制备出抗辐射的纳米电子器件.     

Polymer electrolytes based on ethylene oxide–epichlorohydrin copolymers

In this work we studied the ionic conductivity for three copolymers of the title co-monomers as a function of LiClO₄ content, temperature and ambient relative humidity. We also investigated the interactions between the salt and the co-monomer blocks in the copolymers and its effect on the morphology and thermal properties of the copolymer/salt complexes. Our data indicate that the Li⁺ ion predominantly interacts with the ethylene oxide repeating units of the copolymers. The copolymer with the highest ionic conductivity was obtained with an ethylene oxide/epichlorohydrin ratio of 84/16 containing 5.5% (w/w) of LiClO₄. It showed a conductivity of 4.1×10⁻⁵ S cm⁻¹ (30°C, humidity< 1 ppm) and 2.6×10⁻⁴ S cm⁻¹ at 84% relative humidity (24°C). The potential stability window of the copolymer/salt complex is 4.0 V, as measured by cyclic voltammetry. For comparison, we also prepared a blend of the corresponding homopolymers containing LiClO₄; it showed higher crystallinity and lower ionic conductivity.     

Electrical conductivity,optical properties and mechanical stability of 3, 4, 9, 10-perylenetetracarboxylic dianhidride based organic semiconductor

The 3, 4, 9, 10-perylenetetracarboxylic dianhydride (PTCDA) doped polymer films were prepared with Polypyrrole (PPy) and Polyvinyl alcohol (PVA) polymers by solution-casting. The change in structure and chemical composition of samples was identified by XRD and FTIR respectively. The UV–visible spectroscopy demonstrates the optical characteristics and band gap properties of sample. The homogeneous morphology of sample for higher wt% of PTCDA was examined by atomic force microscopy (AFM). The differential scanning calorimetry (DSC) results demonstrate the decrease in melting temperature (T_m) and degree of crystallinity (χ_c%) of polymeric organic semiconductor. The mechanical property demonstrates the high tensile strength and improved plasticity nature. Impedance spectroscopy was evaluated to determine the conductivity response of polymeric organic semiconductor. The highest DC conductivity (2.08×10⁻³ S/m) was obtained for 10 wt% of PTCDA at 140 °C. The decrease in activation energy (E_a) represents the non-Debye process and was evaluated from the slope of ln σ_dc vs. 10³/T plot.     

Blended lithium ion conducting polymer electrolytes based on boroxine polymers

A new series of blended polymer electrolytes based on a boroxine polymer (BP) with poly(ethylene oxide) (PEO), an ethylene oxide–propylene oxide copolymer or poly(methyl methacrylate) were prepared. Good room temperature mechanical properties were exhibited by electrolytes containing in excess of 30% PEO. Cationic transference number measurements indicated that a slight improvement in lithium ion conductivity could be achieved by using a mixture of LiCF₃SO₃ and LiN(CF₃SO₂)₂ as the electrolyte salt. Electrolytes incorporating significant proportions of BP exhibited reduced lithium–polymer electrolyte interfacial resistance.     

Ionic conductivity studies in composite solid polymer electrolytes based on methylmethacrylate

The preparation and characterization of composite polymer electrolytes of PMMA-LiClO₄-DMP for different concentrations of CeO₂ have been investigated. FTIR studies indicate complex formation between the polymer, salt and plasticizer. The electrical conductivity values measured by a.c. impedance spectroscopy are found to depend upon the CeO₂ concentration. The temperature dependence of the conductivity of the polymer films seems to obey the VTF relation. The conductivity values are presented and the results are discussed.     

Solid polymer electrolytes based on squaric acid structure

Poly(squarate)s (PPS-1 and PPS-2) were synthesized by the reaction of squaryl dichloride with hydroquinone for PPS-1 and with 2,5-diethoxy-1,4-bis(trimethylsilyloxy)benzene for PPS-2, and the ionic conductivities, thermal properties, and electrochemical and thermal properties of their polymer electrolytes with LiN(CF₃SO₂)₂ were investigated. The ionic conductivity increased with increasing the lithium salt concentration for the PPS-1–LiN(CF₃SO₂)₂ electrolyte, and the highest ionic conductivities of 8.60 × 10⁻⁵ S/cm at 100 °C and 9.57 × 10⁻⁸ S/cm at 30 °C were found at the [Li] to [O] ratio of 2:1. And also, the ionic conductivity for the PPS-1–LiN(CF₃SO₂)₂ electrolyte increased with an increase in the lithium salt concentration, reached a maximum value at the [Li] to [O] ratio of 1:2, and then decreased. The highest ionic conductivity was to be 1.04 × 10⁻⁵ S/cm at 100 °C and 1.71 × 10⁻⁸ S/cm at 30 °C, respectively. Both polymer electrolytes exhibited relatively better electrochemical and thermal stabilities. Addition of the PPS-1 as a plasticizer into the poly(ethylene oxide) (PEO)–LiN(CF₃SO₂)₂ electrolyte system suppressed the crystallization of PEO, and improved the ionic conductivity at room temperature. Invited paper dedicated to Professor W. Weppner on his 65th birthday.     

Effect of sintering aid MoO3 on the microstructure and ionic conductivity of ceria- and lanthanum gallate-based electrolytes

The effect of a small addition of MoO₃ on the microstructure and ionic conductivity of Nd_0.2Ce_0.8O_1.9 (NDC), La_0.8Sr_0.2Ga_0.8Mg_0.2O_2.8 (LSGM) and Nd_0.2Ce_0.8O_1.9-La_0.8Sr_0.2Ga_0.8Mg_0.2O_2.8 (NDC-LSGM) has been investigated. The microstructure and electrical properties of the samples were characterized by X-ray diffraction, field-emission scanning electron microscopy and electrochemical impedance spectroscopy. The results show that MoO₃ doping can obviously increase the densification and grain sizes, and decrease the grain and grain boundary resistances of the NDC, LSGM and NDC-LSGM electrolytes. It expands the oxygen ion channels and reduces the total conductance activation energy of the system. The total conductivities of MoO₃-doped NDC and NDC-LSGM samples are 1.56 and 2.10 times higher than that of the undoped NDC system at 450°C. The total conductivity of LSGM-Mo is 1.46 times higher than that of LSGM at 450°C. These finding suggest that MoO₃ is considered to be an effective sintering aid that optimizes the electrical properties of NDC, LSGM and NDC-LSGM electrolytes.     

Effects of plasticizer and nanofiller on the dielectric dispersion and relaxation behaviour of polymer blend based solid polymer electrolytes

Solid polymer electrolytes consisted of poly(ethylene oxide) (PEO) and poly(methyl methacrylate) (PMMA) blend (50:50 wt/wt%) with lithium triflate (LiCF₃SO₃) as a dopant ionic salt at stoichiometric ratio [EO + (CO)]:Li⁺ = 9:1, poly(ethylene glycol) (PEG) as plasticizer (10 wt%) and montmorillonite (MMT) clay as nanofiller (3 wt%) have been prepared by solution cast followed by melt–pressing method. The X–ray diffraction study infers that the (PEO–PMMA)–LiCF₃SO₃ electrolyte is predominantly amorphous, but (PEO–PMMA)–LiCF₃SO₃–10 wt% PEG electrolyte has some PEO crystalline cluster, whereas (PEO–PMMA)–LiCF₃SO₃–10 wt% PEG–3 wt% MMT electrolyte is an amorphous with intercalated and exfoliated MMT structures. The complex dielectric function, ac electrical conductivity, electric modulus and impedance spectra of these electrolytes have been investigated over the frequency range 20 Hz to 1 MHz. These spectra have been analysed in terms of the contribution of electrode polarization phenomenon in the low frequency region and the dynamics of cations coordinated polymer chain segments in the high frequency region, and also their variation on the addition of PEG and MMT in the electrolytes. The temperature dependent dc ionic conductivity, dielectric relaxation time and dielectric strength of the plasticized nanocomposite electrolyte obey the Arrhenius behaviour. The mechanism of ions transportation and the dependence of ionic conductivity on the segmental motion of polymer chain, dielectric strength, and amorphicity of these electrolytes have been explored. The room temperature ionic conductivity values of the electrolytes are found ∼10⁻⁵ S cm⁻¹, confirming their use in preparation of all-solid-state ion conducting devices.     

Infrared and conductivity studies on blends of PMMA/PEO based polymer electrolytes

Poly(methylmetacrylate)/poly(ethylene oxide) (PMMA/PEO) based polymer electrolytes were synthesized using the solution cast technique. Four systems of PMMA/PEO blends based polymer electrolytes films were investigated:

1. PMMA/PEO system,
2. PMMA/PEO + ethylene carbonate (EC) system,
3. PMMA/PEO + lithium hexafluorophosphate (LiPF₆) system and
4. PMMA/PEO + EC + LiPF₆ system.

The polymer electrolytes films were characterized by Impedance Spectroscopy and Fourier Transform Infrared Spectroscopy (FTIR). The FTIR spectra show the complexation occurring between the polymers, plasticizer and lithium salt. The FTIR results give further insight in the conductivity enhancement of PMMA/PEO blends based polymer electrolytes.     

Ionic conductivity studies of 49% poly(methyl methacrylate)-grafted natural rubber-based solid polymer electrolytes

The potential of 49% poly(methyl methacrylate)-grafted natural rubber (MG49) as a solid polymer electrolyte film in rechargeable batteries system were explored. The flat, thin, and flexible films were prepared by solution casting technique. The ionic conductivity was investigated by alternating current impedance spectroscopy. The highest conductivity of 2.3 × 10⁻⁷ Scm⁻¹ was obtained at 20wt.% of LiBF₄ salts content, while 4.0 × 10⁻⁸ Scm⁻¹ was obtained at 15wt.% LiClO₄ salts loading. The observation on structure performed by X-ray diffraction shows the highest conductivity appears at amorphous phase.     

Solid state electrical conductivity and thermal degradation studies on some phenothiazine derivatives

Electrical conductivity and thermal degradation studies of promethazine hydrochloride (PH); 2-chlorophenothiazine (CP); diethazine hydrochloride (DH) and trifluoperazine dihydrochloride (TFP) are reported. The activation energies are evaluated based on their electrical conductivity study conducted over the temperature range 30-150 °C. These energies for PH, CP, DH and TFP are found to be 0.86, 1.02, 0.68 and 1.08 eV, respectively. The materials are analyzed for the kinetic parameters like the activation energies for decomposition and the Arrhenious pre-exponential factors in their pyrolysis region using Broido's, Coats-Redfern and Horowitz-Metzger methods. Using these factors and the standard equations thermodynamic parameters such as enthalpy, entropy and free energies are calculated. Thermogravimetric study on these phenothiazine derivatives in air indicated that their stabilities are in the order CP>TFP>PH >DH.     

Investigations on the effect of complexation of NaF salt with polymer blend (PEO/PVP) electrolytes on ionic conductivity and optical energy band gaps

Sodium ion conducting polymer blend electrolyte films, based on polyethylene oxide (PEO) and polyvinyl pyrrolidone (PVP) complexed with NaF salt, were prepared using solution casting technique. The complexation of the salt with the polymer blend was confirmed by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) and UV-vis spectroscopy. Electrical conductivity of the films was measured with impedance analyzer in the frequency range of 1 Hz to 1 MHz and in the temperature range of 303-348 K. It was observed that the magnitude of conductivity increased with the increase in the salt concentration as well as the temperature. UV-vis absorption spectra in wavelength region of 200-800 nm were used to evaluate the optical properties like direct and indirect optical energy band gaps, optical absorption edge. The optical band gaps decreased with the increase in Na⁺ ion concentration. This suggests that NaF, as a dopant, is a good choice to improve the electrical properties of PEO/PVP polymer blend electrolytes.     

Electrical conductivity in TlI-TiO2 composite solid electrolyte

Composite materials of formula (1−x)TlI−xTiO₂, x=0-0.7, have been prepared and studied by X-ray diffraction, differential scanning calorimetry, scanning electron microscopy and electrical conductivity. The materials were found to be binary phase systems with titania particles distributed between the grains of thallium iodide. The electrical conductivity got enhanced in the composition range x=0.1-0.5 and then decreased with further increase in the titania content. The behaviour is explained in terms of disordering phenomena at the interface regions and space-charge layers formed in the bulk grains of thallium iodide. Moreover, the increased content of titania in the system leads to the disappearance of order-disorder (β-α) phase transition in thallium iodide, which is usually observed in the pure compound. This behaviour was explained by the stabilizing effect of β-phase at high temperatures and at higher contents of titania. X-ray diffractograms do not show any indication to the presence of α-phase at ambient temperature, i.e. the phase could not be stabilized in the investigated system.     

Aqua oxyhydroxycarbonate second phases at the surface of Ba/Sr‐based proton conducting perovskites: a source of confusion in the understanding of proton conduction

Ba/Sr‐based zirconates and cerates appear as potential proton conducting electrolytes for water electrolysers, hydrogen fuel cells and CO₂/syngas converters. Such application requires long lifetime of each components: a good chemical and thermal stability of the device core and a low reactivity of the electrolyte membrane. It has been recently revealed that the complex infrared (IR) and Raman signatures observed for series of zirconates, cerates and/or titanates, assigned by some authors to the bulk protonic species actually arose from the surface species in the form of second undesirable phases: the high dense proton conducting ceramics being free from such signatures. In order to contribute to a better characterization of the phases that can be formed on the surface of proton conducting ceramics, we analysed the IR and Raman spectra of Ba/SrO, Ba/Sr(OH)_2, Ba/SrCO₃ in their dry and hydrated/deuterated forms in combination with thermogravimetric analysis. The results allowed us to confirm the above claim and to re‐assign the vibrational spectra of perovskite materials wrongly attributed to the bulk protonic species. Since these second phases exhibit a high proton conductivity, their presence is very detrimental in the determination of intrinsic electrolyte bulk properties and interpretation of the conduction mechanisms. Copyright © 2012 John Wiley & Sons, Ltd.