Protonation and deprotonation of TpOs(NHPh)Cl(2): an unusually inert amido ligand

Protonation of the Os(IV) amido complex TpOs(NHPh)Cl(2) (1) to give the aniline complex [TpOs(NH(2)Ph)Cl(2)]OTf (2) requires excess triflic acid (HOTf). Complex 1 is unreactive with HCl and other moderately strong acids. Consistent with the low basicity of 1, the aniline complex 2 is extremely acidic and is deprotonated by stoichiometric addition of weak bases such as Cl(-) or H(2)O. No reaction is observed between 1 and methyl triflate (CH(3)OTf) at ambient temperatures. Upon heating, CH(3)OTf removes the chloride ligands from 1 to give CH(3)Cl and the amidobis(triflate) complex TpOs(NHPh)(OTf)(2) (3). Attack at the amido nitrogen is not observed. Complex 1 is thus very inert to protonation and electrophilic attack at nitrogen. A deprotonated form of 1, TpOs[NPh(MgBr)]Cl(2) (4), is generated on reaction of PhMgBr with TpOs(N)Cl(2). Complex 4 is extremely basic and will protonate to 1 with weak acids such as CH(3)CN, DMSO, and acetic anhydride. Thus, 1 has a low acidity as well as a low basicity; it is both less acidic and less basic than aniline. The inertness of 1 is ascribed to partial Os-N pi bonding and to the oxidizing nature of the Os(IV) center.     

Binuclear (salen)osmium phosphinidine and phosphiniminato complexes

The preparation of a number of binuclear (salen)osmium phosphinidine and phosphiniminato complexes using various strategies are described. Treatment of [Os(VI)(N)(L(1))(sol)](X) (sol = H(2)O or MeOH) with PPh(3) affords an osmium(IV) phosphinidine complex [Os(IV){N(H)PPh(3)}(L(1))(OMe)](X) (X = PF(6)1a, ClO(4)1b). If the reaction is carried out in CH(2)Cl(2) in the presence of excess pyrazine the osmium(III) phosphinidine species [Os(III){N(H)PPh(3)}(L(1))(pz)](PF(6)) 2 can be generated. On the other hand, if the reaction is carried out in CH(2)Cl(2) in the presence of a small amount of H(2)O, a μ-oxo osmium(IV) phosphinidine complex is obtained, [(L(1)){PPh(3)N(H)}Os(IV)-O-Os(IV){N(H)PPh(3)}(L(1))](PF(6))(2)3. Furthermore, if the reaction of [Os(VI)(N)(L(1))(OH(2))]PF(6) with PPh(3) is done in the presence of 2, the μ-pyrazine species, [(L(1)){PPh(3)N(H)}Os(III)-pz-Os(III){N(H)PPh(3)}(L(1))](PF(6))(2)4 can be isolated. Novel binuclear osmium(IV) complexes can be prepared by the use of a diphosphine ligand to attack two Os(VI)≡N. Reaction of [Os(VI)(N)(L(1))(OH(2))](PF(6)) with PPh(2)-C≡C-PPh(2) or PPh(2)-(CH(2))(3)-PPh(2) in MeOH affords the binuclear complexes [(MeO)(L(1))Os(IV){N(H)PPh(2)-R-PPh(2)N(H)}Os(IV)(L(1))(OMe)](PF(6))(2) (R = C≡C 5, (CH(2))(3)6). Reaction of [Os(VI)(N)(L(2))Cl] with PPh(2)FcPPh(2) generates a novel trimetallic complex, [Cl(L(2))Os(IV){NPPh(2)-Fc-PPh(2)N}Os(IV)(L(2))Cl] 7. The structures of 1b, 2, 3, 4, 5 and 7 have been determined by X-ray crystallography.     

C--N bond formation on addition of aryl carbanions to the electrophilic nitrido ligand in TpOs(N)Cl(2).

The osmium(VI) nitrido complex TpOs(N)Cl(2) (1) has been prepared from K[Os(N)O(3)] and KTp in aqueous ethanolic HCl. It reacts rapidly with PhMgCl and related reagents with transfer of a phenyl group to the nitrido ligand. This forms Os(IV) metalla-analido complexes, which are readily protonated to give the analido complex TpOs(NHPh)Cl(2) (4). The nitrido-phenyl derivatives TpOs(N)PhCl and TpOs(N)Ph(2) react more slowly with PhMgCl and are not competent intermediates for the reaction of 1 with PhMgCl. Reactions of 1 with alkyl- and arylboranes similarly result in transfer of one organic group to nitrogen, leading to isolable borylamido complexes such as TpOs[N(Ph)(BPh(2))]Cl(2) (11). This is an unprecedented insertion of a nitrido ligand into a boron--carbon bond. Hydrolysis of 11 gives 4. Mechanistic studies suggest that both the Grignard and borane reactions proceed by initial weak coordination of Mg or B to the nitrido ligand, followed by migration of the carbanion to nitrogen. The hydrocarbyl group does not go to osmium and then move to nitrogen--there is no change in the atoms bound to the osmium during the reactions. It is suggested that there may be a general preference for nucleophiles to add directly to the metal--ligand multiple bond rather than binding to the metal first and migrating. Ab initio calculations show that the unusual reactivity of 1 results from its accessible LUMO and LUMO + 1, which are the Os = N pi* orbitals. The bonding in 1 and its reactivity with organoboranes are reminiscent of CO.     

Slow hydrogen atom self-exchange between Os(IV) anilide and Os(III) aniline complexes: relationships with electron and proton transfer self-exchange

Hydrogen atom, proton and electron transfer self-exchange and cross-reaction rates have been determined for reactions of Os(IV) and Os(III) aniline and anilide complexes. Addition of an H-atom to the Os(IV) anilide TpOs(NHPh)Cl(2) (Os(IV)NHPh) gives the Os(III) aniline complex TpOs(NH(2)Ph)Cl(2) (Os(III)NH(2)Ph) with a new 66 kcal mol(-1) N-H bond. Concerted transfer of H* between Os(IV)NHPh and Os(III)NH(2)Ph is remarkably slow in MeCN-d(3), with k(ex)(H*) = (3 +/- 2) x 10(-3) M(-1) s(-1) at 298 K. This hydrogen atom transfer (HAT) reaction could also be termed proton-coupled electron transfer (PCET). Related to this HAT process are two proton transfer (PT) and two electron transfer (ET) self-exchange reactions, for instance, the ET reactions Os(IV)NHPh + Os(III)NHPh(-) and Os(IV)NH(2)Ph(+) + Os(III)NH(2)Ph. All four of these PT and ET reactions are much faster (k = 10(3)-10(5) M(-1) s(-1)) than HAT self-exchange. This is the first system where all five relevant self-exchange rates related to an HAT or PCET reaction have been measured. The slowness of concerted transfer of H* between Os(IV)NHPh and Os(III)NH(2)Ph is suggested to result not from a large intrinsic barrier but rather from a large work term for formation of the precursor complex to H* transfer and/or from significantly nonadiabatic reaction dynamics. The energetics for precursor complex formation is related to the strength of the hydrogen bond between reactants. To probe this effect further, HAT cross-reactions have been performed with sterically hindered aniline/anilide complexes and nitroxyl radical species. Positioning steric bulk near the active site retards both H* and H(+) transfer. Net H* transfer is catalyzed by trace acids and bases in both self-exchange and cross reactions, by stepwise mechanisms utilizing the fast ET and PT reactions.     

Synthesis and reaction of the novel complex [AsPh4][OsCl5(H2O). X-ray structure analysis of [AsPh4][OsCl5(H2O)].2EtOH and [AsPh4][OsCl5(EtOH)].EtOH

The synthesis and characterization of the anionic mononuclear and homobinuclear osmium complexes [AsPh4][OsCl5L].xEtOH [L = H2O, x = 2 (9); L = EtOH, x = 1 (10a); L = py, x = 0 (10b)] and [AsPh4]2[Cl5Os(pyz)OsCl5] (12) (pyz = pyrazine) are described. Upon reduction in a chloride-containing medium, OsO4 (1) affords the osmium(IV) species [OsCl5(H2O)]- (2), which could be isolated by extraction with n-tributyl phosphate (TBP). Complex 9 is the first fully characterized chloroaquo complex of Os(IV). This complex is an effective starting material for the preparation of novel species, such as 10a, 10b, and 12. The X-ray structures of 9 and 10a were determined. Both compounds crystallize in the monoclinic space group P2(1)/n. 9: C28H34AsCl5O3Os, a = 10.910(4) A, b = 17.127(5) A, c = 17.555(7) A, beta = 103.77(2) degrees, V = 3186(2) A3, and Z = 4. 10a: C28H32AsCl5O2Os, a = 10.7762(2) A, b = 17.3939(1) A, c = 17.1477(3) A, beta = 103.645(1) degrees, V = 3123.45(8) A, and Z = 4. Complexes 9 and 10a crystallize with two and one molecule of EtOH and are bonded via hydrogen bridges to the H2O and EtOH ligand in 9 and 10a, respectively.     

Synthesis and properties of oxo-carboxylato- and dioxo-bridged diosmium complexes of tris(2-pyridylmethyl)amine

A series of oxo-bridged diosmium complexes with tpa ligand (tpa = tris(2-pyridylmethyl)amine) are synthesized. The hydrolytic reaction of the mononuclear osmium complex [Os(III)Cl(2)(tpa)]PF(6) in aqueous solution containing a sodium carboxylate yields a μ-oxo-μ-carboxylato-diosmium(III) complex, [Os(III)(2)(μ-O)(μ-RCOO)(tpa)(2)](PF(6))(3) (R = C(3)H(7) (1), CH(3) (2), or C(6)H(5) (3)). One-electron oxidation of 1 with (NH(4))(2)Ce(IV)(NO(3))(6) gives a mixed-valent [Os(III)Os(IV)(μ-O)(μ-C(3)H(7)COO)(tpa)(2)](PF(6))(4) complex (4). A mixed-valent di-μ-oxo-diosmium complex, [Os(III)Os(IV)(μ-O)(2)(tpa)(2)](PF(6))(3) (5), is also synthesized from 1 in an aerobic alkaline solution (pH 13.5). All the complexes exhibit strong absorption bands in a visible-near-infrared region based on interactions of the osmium dπ and oxygen pπ orbitals of the Os-O-Os moiety. The X-ray crystallographic analysis of 1, 3, and 4 shows that the osmium centers take a pseudo-octahedral geometry in the μ-oxo-μ-carboxylato-diosmium core. The mixed-valent osmium(III)osmium(IV) complex 4 has a shorter osmium-oxo bond and a larger osmium-oxo-osmium angle as compared with those of the diosmium(III) complex 1 having the same bridging carboxylate. Crystal structure of 5 reveals that the two osmium ions are bridged by two oxo groups to give an Os(2)(μ-O)(2) core with the significantly short osmium-osmium distance (2.51784(7) ?), which is indicative of a direct osmium-osmium bond formation with the bond order of 1.5 (σ(2)π(2)δ(2)δ*(2)π*(1) configuration). In the electrochemical studies, the μ-oxo-μ-carboxylato-diosmium(III) complexes exhibit two reversible Os(III)Os(III)/Os(III)Os(IV) and Os(III)Os(IV)/Os(IV)Os(IV) oxidation couples and one irreversible redox wave for the Os(III)Os(III)/Os(II)Os(III) couple in CH(3)CN. The irreversible reductive process becomes reversible in CH(3)CN/H(2)O (1:1 Britton-Robinson buffer; pH 5-11), where the {1H(+)/2e(-)} transfer process is indicated by the plot of the redox potentials against the pH values of the solution of 1. Thus, the μ-oxo-μ-butyrato-diosmium(III) center undergoes proton-coupled electron transfer to yield a μ-hydroxo-μ-butyrato-diosmisum(II) species. The di(μ-oxo) complex 5 exhibits one reversible Os(III)Os(IV)/Os(IV)Os(IV) oxidation process and one reversible Os(III)Os(IV)/Os(III)Os(III) reduction process in CH(3)CN. The comproportionation constants K(com) of the Os(III)Os(IV) states for the present diosmium complexes are on the order of 10(19). The values are significantly larger when compared with those of similar oxo-bridged dimetal complexes of ruthenium and rhenium.     

En route to osmium analogues of KP1019: synthesis, structure, spectroscopic properties and antiproliferative activity of trans-[Os(IV)Cl4(Hazole)2

By controlled Anderson type rearrangement reactions complexes of the general formula trans-[Os(IV)Cl(4)(Hazole)(2)], where Hazole = 1H-pyrazole, 2H-indazole, 1H-imidazole, and 1H-benzimidazole, have been synthesized. Note that 2H-indazole tautomer stabilization in trans-[Os(IV)Cl(4)(2H-indazole)(2)] is unprecedented in coordination chemistry of indazole. The metal ion in these compounds possesses the same coordination environment as ruthenium(III) in (H(2)ind)[Ru(III)Cl(4)(Hind)(2)], where Hind = 1H-indazole, (KP1019), an investigational anticancer drug in phase I clinical trials. These osmium(IV) complexes are appropriate precursors for the synthesis of osmium(III) analogues of KP1019. In addition the formation of an adduct of trans-[Os(IV)Cl(4)(Hpz)(2)] with cucurbit[7]uril is described. The compounds have been comprehensively characterized by elemental analysis, EI and ESI mass spectrometry, spectroscopy (IR, UV-vis, 1D and 2D NMR), cyclic voltammetry, and X-ray crystallography. Their antiproliferative acitivity in the human cancer cell lines CH1 (ovarian carcinoma), A549 (nonsmall cell lung carcinoma), and SW480 (colon carcinoma) is reported.     

Reaction of an osmium(VI) nitrido complex with cyanide: formation and reactivity of an osmium(III) hydrogen cyanamide complex

Reaction of [Os(VI)(N)(L(1))(Cl)(OH(2))] (1) with CN(-) under various conditions affords (PPh(4))[Os(VI)(N)(L(1))(CN)(Cl)] (2), (PPh(4))(2)[Os(VI)(N)(L(2))(CN)(2)] (3), and a novel hydrogen cyanamido complex, (PPh(4))(2)[Os(III){N(H)CN}(L(3))(CN)(3)] (4). Compound 4 reacts readily with both electrophiles and nucleophiles. Protonation and methylation of 4 produce (PPh(4))[Os(III)(NCNH(2))(L(3))(CN)(3)] (5) and (PPh(4))[Os(III)(NCNMe(2))(L(3))(CN)(3)] (6), respectively. Nucleophilic addition of NH(3), ethylamine, and diethylamine readily occur at the C atom of the hydrogen cyanamide ligand of 4 to produce osmium guanidine complexes with the general formula [Os(III){N(H)C(NH(2))NR(1)R(2)}(L(3))(CN)(3)](-) , which have been isolated as PPh(4) salts (R(1) = R(2) = H (7); R(1) = H, R(2) = CH(2)CH(3) (8); R(1) = R(2) = CH(2)CH(3) (9)). The molecular structures of 1-5 and 7 and 8 have been determined by X-ray crystallography.     

Structural systematics for o-C(6)H(4)XY ligands with X,Y= O,NH, and S donor atoms. o-iminoquinone and o-iminothioquinone complexes of ruthenium and osmium

The structural features of quinone ligands are diagnostic of charge. The o-benzoquinone, radical semiquinonate, and catecholate electronic forms have C-O bond lengths and a pattern of ring C-C bond lengths that point to a specific mode of coordination. This correlation between ligand charge and structure has been extended to iminoquinone and iminothioquinone ligands, giving a charge-localized view of electronic structure for complexes of redox-active metal ions. The radical semiquinonate form of these ligands has been found to be a surprisingly common mode of coordination; however, the paramagnetic character of the radical ligand is often obscured in complexes containing paramagnetic metal ions. In this report, diamagnetic iminosemiquinonate (isq) and iminothiosemiquinonate (itsq) complexes of ls-d(5) Ru(III) with related complexes of osmium are reported. With osmium, the Os(IV)-amidophenolate (ap) redox isomer is formed. Electrochemical and spectral properties are described for Ru(PPh(3))(2)(isq)Cl(2), Ru(PPh(3))(2)(itsq)Cl(2), Os(PPh(3))(2)(ap)Br(2), Os(PPh(3))(2)(atp)Br(2), and Os(PPh(3))(2)(ap)H(2). Crystallographic characterization of Ru(PPh(3))(2)(isq)Cl(2), Ru(PPh(3))(2)(itsq)Cl(2), and Os(PPh(3))(2)(ap)H(2) was used to assign charge distributions.     

Photoinduced and chemical oxidation of coordinated imine to amide in isomeric osmium(II) complexes of N-arylpyridine-2-carboxaldimines. Synthesis,characterization, electron transfer properties,and structural studies

The reaction of N-arylpyridine-2-carboxaldimine [C(5)H(4)NC(H)NC(6)H(4)R] (HL) with ammonium hexabromoosmate (NH(4))(2)[OsBr(6)] in boiling 2-methoxyethanol afforded a violet solution from which two geometrical isomers of [OsBr(2)(HL)(2)] (1 and 2) were isolated. These are characterized by analytical and spectroscopic data. (1)H NMR spectral data were used for the identification of the isomers. The blue-violet isomer, 1 (designated as ctc), has a 2-fold symmetry axis and gave rise to resonances for only one coordinated HL. The geometry of the ctc-isomer was, however, revealed from the X-ray structure determination of a representative example. The red-violet isomer (2, designated as ccc), on the other hand, is unsymmetrical and gave rise to a large number of proton resonances. The isomeric complexes, [OsBr(2)(HL)(2)], showed intense MLCT transitions in the visible region. This transition, in the ccc-isomer, is slightly (10 nm) red shifted in comparison to the ctc-isomer. These diimine complexes showed one metal based reversible oxidation assignable to the Os(III)/Os(II) process followed by two irreversible oxidations at more anodic potentials (>1.4 V). In addition to these, the complexes also showed two irreversible ligand reductions at high cathodic potentials (<-1.4 V). An unusual type of photochemical transformation of the azomethine function of coordinated HL in osmium compounds 1 is studied. When an air equilibrated acetonitrile solution of 1 was exposed to a xenon lamp, it underwent oxidation affording the mixed ligand, amido complexes of general formula [OsBr(2)(HL)(LO)], 3 (LO = C(5)H(4)NC(O)-N-C(6)H(4)R), in an excellent yield (>95%). This transformation (1 --> 3) was achieved chemically when H(2)O(2) was used as an oxidant. Notably, the chemical oxidation with H(2)O(2) also led to the formation of a tetravalent complex, [OsBr(2)(LO)(2)], 4, as a minor product. Compound 3 was characterized by various spectroscopic and analytical techniques. The room temperature magnetic moment of 3 corresponds to a t(2)(5) configuration for the osmium(III) center. EPR spectra of the amido complexes were recorded at 77 K in 1:1 dichloromethane-toluene glass, and they were anisotropic in nature. FAB mass spectra of 3 displayed intense peaks due to parent molecular ions. For example, the complex [OsBr(2)(HL(1))(L(1)O)], 3a, showed a strong peak at m/z 729 amu. The electronic spectrum of compound 3 consisted of a broad LMCT transition (ca. 525 nm; epsilon, 3000 M(-1) cm(-1)). The cyclic voltammogram of compound 3 consisted of two responses, one each on the positive and negative side of SCE, corresponding to Os(IV)/Os(III) (ca. 0.8V) and Os(III)/Os(II) (ca. -0.3V) couples, respectively. There has been a large cathodic shift of potential for the Os(III)/Os(II) couple in 3 in comparison to that in the parent complex, 1. The diamido compound [OsBr(2)(LO)(2)], 4, is diamagnetic and insoluble in common solvents. The X-ray structure determination of a representative sample, 4a, is reported. The molecule contains a C(2)-symmetry axis with bromide ions in relative cis positions. The Os-N(amide) bond lengths are considerably shorter than the Os-N(pyridine) lengths. All other bond lengths and angles fall within the expected range.     

Low-potential cyclometalated osmium(II) mediators of glucose oxidase

The osma(II)cycles [Os(phpy)(LL)(2)]PF(6) (LL = 1,10-phen (3a) and 4,4'-Me(2)-2,2'-bpy (3b)) are made from [(eta(6)-C(6)H(6))Os(micro-Cl)Cl](2) (1) either via transmetalation using the [Hg(phpy)(2)] organomercurial in MeOH or via the sp(2)-C-H bond cleavage of 2-phenylpyridine (phpyH) in MeCN to afford [(eta(6)-C(6)H(6))Os(phpy)Cl] or [(eta(6)-C(6)H(6))Os(phpy)(MeCN)]PF(6), respectively. The latter two react cleanly with LL to give 3a and 3b, the M(II/III) redox potentials of which equal 30 and -100 mV (vs Ag/AgCl), respectively. The electrochemically made Os(III) species oxidize rapidly reduced glucose oxidase. The second-order rate constant equals 1.1 x 10(7) M(-)(1) s(-)(1) for 3a at 25 degrees C, pH 7.     

Synthesis, crystal structures, and reactivity of osmium(II) and -(IV) complexes containing a dithioimidodiphosphinate ligand

Reduction of trans-[OsL2(O)2] (1) (L-=[N(i-Pr2PS)2]-) with hydrazine hydrate afforded a dinitrogen complex 2, possibly "[OsL2(N2)(solv)]" (solv=H2O or THF), which reacted with RCN, R'NC, and SO2 to give trans-[OsL2(RCN)2] (R=Ph (3), 4-tolyl (4), 4-t-BuC6H4 (5)), trans-[OsL2(R'NC)2] (R'=2,6-Me2C6H3 (xyl) (6), t-Bu (7)), and [Os(L)2(SO2)(H2O)] (8) complexes, respectively. Protonation of compounds 2, 3, and 6 with HBF4 led to formation of dicationic trans-[Os(LH)2(N2)(H2O)][BF4]2 (9), trans-[Os(LH)2(PhCN)2][BF4]2 (10), and trans-[Os(LH)2(xylNC)2][BF4]2 (11), respectively. Treatment of 1 with phenylhydrazine and SnCl2 afforded trans-[OsL2(N2Ph)2] (12) and trans-[OsL2Cl2] (13), respectively. Air oxidation of compound 2 in hexane/MeOH gave the dimethoxy complex trans-[OsL2(OMe)2] (14), which in CH2Cl2 solution was readily air oxidized to 1. Compound 1 is capable of catalyzing aerobic oxidation of PPh3, possibly via an Os(IV) intermediate. The formal potentials for the Os-L complexes have been determined by cyclic voltammetry. The solid-state structures of compounds 4, 6, cis-8, 13, and 14 have been established by X-ray crystallography.     

Chiral osmium complexes with sterically bulky Schiff-base ligands. Crystal structures of Os(IV) derivatives and the reactivity and catalytic cyclopropanation of alkenes with EDA

The syntheses and reactivities of sterically encumbered trans-dioxoosmium(VI) complexes containing Schiff-base ligands bis(3,5-di-tert-butylsalicylidene)-1,2-cyclohexane-diamine (H2tBu-salch) and bis(3,5-dibromosalicylidene)-1,2-cyclohexane-diamine (H2Br-salch) are described. Reactions of [Os(VI)tBu-salch)O2] (1a) and [Os(VI)(Br-salch)O2] (1b) with PPh(3), p-X-arylamines (X = NO2, CN), N2H4 x H2O, Ph2NNH2, SOCl2, CF3CO2H, Br2, and I2 under reducing conditions gave [Os(II)(Br-salch)(OPPh3)2] (2), [Os(IV)(Br-salch)(p-X-C6H4NH)2] (3), [mu-O-{Os(IV)(tBu-salch)(p-NO2C6H4NH)}2] (4), [Os(II)(Br-salch)(N2)(H2O)] (5), [Os(IV)(tBu-salch)(OH)(Cl)] (6), [Os(IV)(tBu-salch)(OH)2] (7), [Os(IV)(tBu-salch)Cl2] (8), [Os(IV)(tBu-salch)(CF3CO2)2] (9), [Os(IV)(tBu-salch)Br2] (10), and [Os(IV)(tBu-salch)I2] (11), respectively. X-ray crystal structure determinations of [Os(IV)(Br-salch)(p-NO2C6H4NH)2] (3a), [Os(IV)(Br-salch)(p-CNC6H4NH)2] (3b), 6, 8, 9, and 11 reveal the Os-N(amido) distances to be 1.965(4)-1.995(1) A for the bis(amido) complexes, Os-Cl distances of 2.333(8)-2.3495(1) A for 6 and 8, Os-O(CF3CO2) distances of 2.025(6)-2.041(6) A for 9, and Os-I distances of 2.6884(6)-2.6970(6) A for 11. Upon UV irradiation, (1S,2S)-(1a) reacted with aryl-substituted alkenes to give the corresponding epoxides in moderate yields, albeit with no enantioselectivity. The (1R,2R)-6 catalyzed cyclopropanation of a series of substituted styrenes exhibited moderate to good enantioselectivity (up to 79% ee) and moderate trans selectivity.     

Synthesis and characterization of osmium(II) trispyrazolylborate complexes

Treatment of H2OsBr6 with excess 1,5-cyclooctadiene (cod) in boiling tert-butyl alcohol affords the polymer [OsBr2(cod)]x (1), which reacts with acetonitrile to form the mononuclear adduct OsBr2(cod)(CH3CN)2 (2). Polymer 1 reacts with potassium trispyrazolylborate (KTp) in ethanol to afford the hydride TpOs(cod)H (3) and the bromide complex TpOs(cod)Br (4). Bromide complex 4 reacts with sodium methoxide in methanol to afford TpOs(cod)OMe (5), which has been structurally characterized. Treatment of hydride 3 with methyl trifluoromethanesulfonate (MeOTf) in diethyl ether results in loss of methane and formation of the triflate complex TpOs(cod)OTf (6), which reacts with MgMe2 to give the methyl complex TpOs(cod)Me (7). The addition of bis(dimethylphosphino)methane (dmpm) to the known compound TpOs(PPh3)2Cl yields a mixture of the substitution products TpOs(eta1-dmpm)(PPh3)Cl (8) and TpOs(eta2-dmpm)Cl (9); the latter reacts with methyllithium to generate the methyl compound TpOs(dmpm)Me (10). NMR and IR data for these new compounds are reported. Crystal data for 5.MeOH at -80 degrees C are as follows: monoclinic, P2(1)/n, a = 10.728(1) A, b = 14.004(2) A, c = 13.906(2) A, beta = 102.42(6) degrees , V = 2040.3(5) A3, Z = 4, R(F) = 0.0247 for I > or = 2sigma(I), and R(wF2) = 0.0539 for all data.     

Chemically induced cyclometalation of 2-(arylazo)phenols. Synthesis,characterization, and redox properties of a family of organoosmium complexes

Reaction of 2-(arylazo)phenols (H(2)ap-R; R = OCH(3), CH(3), H, Cl, and NO(2)) with [Os(PPh(3))(2)(CO)(2)(HCOO)(2)] affords a family of organometallic complexes of osmium(II) of type [Os(PPh(3))(2)(CO)(ap-R)] where the 2-(arylazo)phenolate ligand is coordinated to the metal center as a tridentate C,N,O-donor. Structure of the [Os(PPh(3))(2)(CO)(ap-H)] complex has been determined by X-ray crystallography. All the [Os(PPh(3))(2)(CO)(ap-R)] complexes are diamagnetic and show characteristic (1)H NMR signals and intense MLCT transitions in the visible region. They also show emission in the visible region at ambient temperature. Cyclic voltammetry on the [Os(PPh(3))(2)(CO)(ap-R)] complexes shows a reversible Os(II)-Os(III) oxidation within 0.39-0.73 V vs SCE, followed by a reversible Os(III)-Os(IV) oxidation within 1.06-1.61 V vs SCE. Coulometric oxidation of the [Os(PPh(3))(2)(CO)(ap-R)] complexes generates the [Os(III)(PPh(3))(2)(CO)(ap-R)](+) complexes, which have been isolated as the hexafluorophosphate salts. The [Os(III)(PPh(3))(2)(CO)(ap-R)]PF(6) complexes are one-electron paramagnetic and show axial ESR spectra. In solution they behave as 1:1 electrolytes and show intense LMCT transitions in the visible region. The [Os(III)(PPh(3))(2)(CO)(ap-R)]PF(6) complexes have been observed to serve as mild one-electron oxidants in a nonaqueous medium.     

Tuning the properties of the osmium nitrido group in TpOs(N)X2 by changing the ancillary ligand

TpOs(N)(OAc)2 (2) is formed upon reaction of TpOs(N)Cl2 (1) with excess silver acetate (Tp = hydrotrispyrazolylborate). Treatment of 2 with protic acids HX gives the osmium(VI) complexes TpOs(N)X2, where X = trifluoroacetate (TFA, 3), trichloroacetate (TCA, 4), tribromoacetate (TBA, 5), bromide (6), oxalate (X2 = O2C2O2, 7), or nitrate (ONO2, 8). Cyclic voltammetry studies of 1-8 show irreversible reductions of OsVI to OsV, varying over a range of 0.63 V. Much smaller relative variations are observed in 15N NMR chemical shifts, v(Os identical to N) stretching frequencies, and optical absorbances. Compounds 1-8 all react with PPh3 by nucleophilic attack at the nitride ligand, yielding TpOs(NPPh3)X2. The reactions are accelerated by more electron withdrawing ligands X. The relative rates correlate with the peak reduction potentials although the effect is small: the rates vary by only 10(2) while the 0.63 V change in Ep,c corresponds to a change in equilibrium constant for electron transfer of approximately 10(11). Compounds 1-8 also react with triphenylboron, BPh3, with formation of borylanilido complexes TpOs[N(Ph)BPh2]X2. However, rate constants for reactions with BPh3 to yield OsIV boryl-amido complexes do not in general correlate with one-electron-reduction potentials. This is likely due to the mechanism of the BPh3 reactions being a two-step process and not simply nucleophilic attack.     

Osmium Complexes of 1,4,7-Triazacyclononane (tacn) and 1,4,7-Trimethyl-1,4,7-triazacyclononane (Me(3)tacn) and the X-ray Crystal Structure of [(Me(3)tacn)Os(eta(6)-C(6)H(5)BPh(3))]BPh(4).CH(3)CN

The complexes of osmium with tacn (1,4,7-triazacyclononane) and Me(3)tacn (1,4,7-trimethyl-1,4,7-triazacyclononane), [LOs (eta(6)-C(6)H(6))](PF(6))(2) (L = tacn) and LOsCl(3) (L = tacn, Me(3)tacn), have been prepared by substitution of L on [Os(eta(6)-C(6)H(6))Cl(2)](2) or [Os(2)Cl(8)](2)(-), respectively. Reaction of LOsCl(3) with neat triflic acid leads to partial replacement of chloride and formation of the binuclear Os(III)-Os(III) complexes [LOs(&mgr;-Cl(3))OsL](PF(6))(3) (L = tacn, Me(3)tacn). The binuclear nature was established by NMR spectroscopy and elemental analysis and, for L = tacn, a partially refined X-ray crystal structure which shows the Os-Os separation to be 2.667 ?, indicative of significant metal-metal bonding. Reduction of [LOs(&mgr;-Cl(3))OsL](3+) over zinc amalgam in either aqueous or non-aqueous solution yields the intensely colored Os(II)-Os(III) mixed-valence ions [LOs(&mgr;-Cl(3))OsL](2+). Electrochemical measurements on [LOs(&mgr;-Cl(3))OsL](3+) in CH(3)CN reveal the reversible formation of the mixed valence ions. These are further reduced at lower potential to the Os(II)-Os(II) binuclear species, reversibly for L = Me(3)tacn. (Me(3)tacn)OsCl(3) is oxidized by persulfate ion to give [(Me(3)tacn)OsCl(3)](+); zinc amalgam reduction in an aqueous solution at high concentration produces the binuclear complex [(Me(3)tacn)Os(&mgr;-Cl(3))Os(Me(3)tacn)](3+) or, at low concentration, a solution containing an air sensitive osmium(II) species. Addition of BPh(4)(-) results in the eta(6)-arene zwitterion [(Me(3)tacn)Os(eta(6)-C(6)H(5)BPh(3))](+), which was characterized by X-ray diffraction on the BPh(4)(-) salt. The compound crystallizes in the triclinic space group P1 with a = 11.829(2) ?, b = 12.480(3) ?, c = 17.155(4) ?, alpha = 84.42(2) degrees, beta = 83.52(2) degrees, gamma = 71.45(2) degrees, V = 2380(2) ?(3), Z = 2, and R = 7.62%, and R(w) = 7.39%.     

FeCl3-activated oxidation of alkanes by [Os(N)O3]-

Although the ion [Os(VIII)(N)(O)(3)](-) is a stable species and is not known to act as an oxidant for organic substrates, it is readily activated by FeCl(3) in CH(2)Cl(2)/CH(3)CO(2)H to oxidize alkanes efficiently at room temperature. The oxidation can be made catalytic by using 2,6-dichloropyridine N-oxide as the terminal oxidant. The active intermediates in stoichiometric and catalytic oxidation are proposed to be [(O)(3)Os(VIII)N-Fe(III)] and [Cl(4)(O)Os(VIII)N-Fe(III)], respectively.     

"Spontaneous" ambient temperature dehydrocoupling of aromatic amine-boranes

The dehydrocoupling/dehydrogenation behavior of primary arylamine-borane adducts ArNH(2)?BH(3) (3?a-c; Ar = a: Ph, b: p-MeOC(6)H(4), c: p-CF(3)C(6)H(4)) has been studied in detail both in solution at ambient temperature as well as in the solid state at ambient or elevated temperatures. The presence of a metal catalyst was found to be unnecessary for the release of H(2). From reactions of 3?a,b in concentrated solutions in THF at 22?°C over 24?h cyclotriborazanes (ArNH-BH(2))(3) (7?a,b) were isolated as THF adducts, 7?a,b?THF, or solvent-free 7?a, which could not be obtained via heating of 3?a-c in the melt. The μ-(anilino)diborane [H(2)B(μ-PhNH)(μ-H)BH(2)] (4?a) was observed in the reaction of 3?a with BH(3)?THF and was characterized in situ. The reaction of 3?a with PhNH(2) (2?a) was found to provide a new, convenient method for the preparation of dianilinoborane (PhNH)(2)BH (5?a), which has potential generality. This observation, together with further studies of reactions of 4?a, 5?a, and 7?a,b, provided insight into the mechanism of the catalyst-free ambient temperature dehydrocoupling of 3?a-c in solution. For example, the reaction of 4?a with 5?a yields 6?a and 7?a. It was found that borazines (ArN-BH)(3) (6?a-c) are not simply formed via dehydrogenation of cyclotriborazanes 7?a-c in solution. The transformation of 7?a to 6?a is slowly induced by 5?a and proceeds via regeneration of 3?a. The adducts 3?a-c also underwent rapid dehydrocoupling in the solid state at elevated temperatures and even very slowly at ambient temperature. From aniline-borane derivative 3?c, the linear iminoborane oligomer (p-CF(3)C(6)H(4))N[BH-NH(p-CF(3)C(6)H(4))](2) (11) was obtained. The single-crystal X-ray structures of 3?a-c, 5?a, 7?a, 7?b?THF, and 11 are discussed.     

Oxidative ortho-C-N fusion of aniline by OsO4. Isolation, characterization of oxo-amido Osmium(VI) complexes, and their catalytic activities for oxidative C-C bond cleavage of unsaturated hydrocarbons

In an unusual reaction of osmium(VIII) oxide with p-substituted aromatic amines (X-C(6)H(4)-NH(2), where X = Me, H, Cl) in heptane afforded the brown osmium(VI)-oxo complexes [OsO(L)(2)] (1a-c, L = N-aryl-1,2-arylenediamide) in moderate yields. The ligand L is formed in situ via oxidative ortho-C-N fusion of arylamines. The reaction occurs in an inert atmosphere, and a part of Os(VIII) is used up for the oxidation of aromatic amine. Single crystal X-ray structure of a representative complex 1a is solved. The structural analysis has authenticated the ortho-C-N fusion of ArNH(2) resulting in formation of the diamide ligand, L. The complex as a whole is penta-coordinated, and the coordination sphere has a distorted square pyramidal geometry (tau = 0.26). A similar reaction of osmium(VIII) oxide with the preformed N-phenyl-1,2-phenelene diamine produced the complex 1a in nearly quantitative yield. The substituted phenazine, 5-phenyl-3-phenylimino-3,5-dihydro-phenazine-2-ylamine, is obtained as a byproduct of the latter reaction. The complexes, 1a-c, can be reduced in a reversible one-electron step, as probed by cyclic voltammetry. The one electron reduced paramagnetic Os(V) intermediate is, however, Electron Paramagnetic Resonance (EPR) silent. Solution spectra of the osmium complexes show several multiple transitions in the UV-vis region. Density functional theory calculations were employed to confirm the structural features and to support the spectroscopic assignments. The complex 1a catalyzes oxidation of a wide variety of unsaturated hydrocarbons like alkenes, alkynes, and aldehydes to the corresponding carboxylic acids in the presence of tert-butylhydroperoxide (TBHP) efficiently at room temperature.