High-molecular-weight polyterephthalamide by direct polycondensation reaction in the presence of poly(ethylene oxide)

Polyterephthalamides of high molecular weight (η_inh up to 1.9) were obtained by the direct polycondensation reaction of terephthalic acid and aromatic diamines in the presence of poly(ethylene oxide) (PEO) with triphenyl phosphite in a N-methylpyrrolidone (NMP)–pyridine solution that contained lithium chloride. The molecular weights of the polymers produced varied with the amount and molecular weight of PEO, which showed maximum values when PEO with a molecular weight of 2.0 × 10⁴?5.0 × 10⁵ was used in a concentration of about 0.5 wt % in the solvent. The polycondensation reaction was significantly affected by the level of pyridine in a mixed solvent of NMP and pyridine and by the concentration of the lithium chloride added.     

New optically active and thermally stable poly(ester-imide)s containing bicyclo segment in the main chain: Synthesis and characterization

New optically active diacid containing L-2-aminobutyric acid moiety was prepared by reacting bicyclo[2,2,2]oct-7-ene-2,3,5,6-tetracarboxylic dianhydride 1, with L-2-aminobutyric acid 2 in the acetic acid, and was polymerized with several aromatic diols 5a–f to obtain a new series of optically active poly(ester-imide)s (PEIs) through direct polycondensation using tosyl chloride/pyridine/N,N-dimethylformamide system as condensation agent. The data obtained by these methods indicate that, good yields and inherent viscosities are resulted. These polymers are readily soluble in polar organic solvents such as N,N-dimethyacetamide, N,N-dimethyformamide, dimethyl sulfoxide. The obtained polymers were characterized by FTIR, specific rotation measurements, elemental analysis and ¹H NMR spectroscopy. The thermal stability of the resulting PEIs were evaluated with thermogravimetric analysis and differential scanning calorimetry techniques under a nitrogen atmosphere.     

Preparation and characterization of new photosensitive and optically active poly(amide-imide)s from N-trimellitylimido-L-amino acid and dibenzalacetone moiety in the main chain

Six new photosensitive and optically active poly(amide-imide)s 8a–8f with good inherent viscosities based on dibenzalacetone moiety were synthesized from the direct polycondensation reaction of N-Trimellitylimido-L-amino acids 3a–3f with 2,5-bis(4-aminobenzylidene)cyclopentanone 7 by two different methods such as direct polycondensation in a medium consisting of N-methyl-2-pyrrolidone/triphenyl phosphite/calcium chloride/pyridine and direct polycondensation in a tosyl chloride/pyridine (py)/N,N-dimethylformamide system. Diamine 7 was synthesized by using a two-step reaction. At first 2,5-bis(4-nitrobenzylidene)cyclopentanone 6 was prepared from the reaction of two equimolars 4-nitrobenzaldehyde 5 and one equimolar cyclopentanone 4 and dinitro compound 6 was reduced by using Na2S. Also N-trimellitylimido-L-amino acids 3a–3f were synthesized by the condensation reaction of trimellitic anhydride 1 with two equimolars of various L-amino acids 2a–2f in an acetic acid solution. The polymerization reactions produced a series of photosensitive and optically active poly(amide-imide)s with high yield and good inherent viscosity. The resulted polymers were fully characterized by means of FTIR and ¹H-NMR spectroscopy, elemental analyses, inherent viscosity, specific rotation, solubility tests, UV-VIS spectroscopy, differential scanning calorimeter, thermogravimetric analysis, and derivative of thermogravimetric. These macromolecules exhibited maximum UV-VIS absorption at around 395 and 265 nm in a N,N-dimethylformamide solution.     

Synthesis of aromatic poly(amide-imide)s from novel diimide-diacid (DIDA) containing sulphone and bulky pendant groups by direct polycondensation with various diamines

A novel diimide-diacid (DIDA) monomer, 4-{4-[(4-methyl phenyl) sulphonyl]}-1,3-bis-trimellitoimido benzene containing sulphone and bulky pendant groups was successfully synthesized and used to synthesize a series of wholly aromatic poly(amide-imide)s (PAIs) by direct polycondensation method. The direct polycondensation of newly synthesized DIDA with different diamines was carried out via Yamazaki’s phosphorylation method using triphenyl phosphite and pyridine system. The resulting poly(amide-imide)s were obtained in quantitative yields with inherent viscosities 0.36-0.47 dl/g in DMAc at 30 ± 0.1 °C. The poly(amide-imide)s were amorphous and were readily soluble in various solvents such as N-methyl-2-pyrrolidinone (NMP), N,N-dimethylacetamide (DMAc), N,N-dimethylformamide (DMF), dimethylsulfoxide (DMSO), and pyridine. Tough and flexible films were obtained by casting their DMAc solution. According to thermogravimetric analysis, the polymers were fairly stable up to temperature around 396 °C, and 10% weight losses in the temperature range of 476-511 °C that showed good thermal stabilities of these polymers.     

New optically active poly(amide–imide)s from N-trimellitylimido-l-amino acid and 1,2-bis[4-aminophenoxy]ethane in the main chain: Synthesis and characterization

Six new optically active poly(amide–imide)s (PAIs) with good inherent viscosities were synthesized from the direct polycondensation reaction of N-trimellitylimido-l-amino acids with 1,2-bis[4-aminophenoxy]ethane by direct polycondensation in a medium consisting of N-methyl-2-pyrrolidone (NMP)/triphenyl phosphite (TPP)/calcium chloride (CaCl₂)/pyridine (py). Diamine was synthesized by using a two-step reaction. At first 1,2-bis[4-nitrophenoxy]ethane was prepared from the reaction of two equimolars 4-nitrophenol and one equimolar 1,2-dibromo ethane and the dinitro compound was reduced by using Pd/C. Also N-trimellitylimido-l-amino acids were synthesized by the condensation reaction of trimellitic anhydride with two equimolars of various l-amino acids in acetic acid solution. The polymerization reactions produced a series of optically active PAIs with a high yield and good inherent viscosity. The resulted polymers were fully characterized by means of FTIR and ¹H NMR spectroscopy, elemental analyses, inherent viscosity, specific rotation, solubility tests, thermogravimetric analysis (TGA), and a derivative of thermogravimetric (DTG) analysis.     

Synthesis and mesogenic properties of four series of polyesters derived from dicarboxylic and dihydroxylic aromatic monomers

Some members of four series of polyesters were synthesized by the direct polycondensation of two types of dicarboxylic acids (4,4′-dicarboxy-α,ω-diphenoxyalkanes and 4,4′-dicarboxy-α,ω-dibenzoyloxyalkanes) with two types of bisphenols (4,4′-dihydroxy-α,ω-diphenoxyalkanes and 4,4′-dihydroxy-α,ω-dibenzoyloxyalkanes) using tosyl chloride in pyridine in the presence of N, N-dimethylformamide. The ¹H-NMR spectra of the polymers synthesized showed that these polymers have an ordenated structure. The mesogenic properties of these polymers were studied by optical microscopy and differential scanning calorimetry. Many of the polymers show nematic mesomorphism.     

Synthesis and properties of polyimides derived from a new diamine containing bulky-flexible pendent group

Novel aromatic polyimides containing bulky-flexible pendent group were successfully synthesized by direct polycondensation of N-(4-(4-(4,5-diphenyl-1H-imidazole-2-yl)phenoxy)phenyl)-3,5-diaminobenzamide with various tetracarboxylic dianhydrides. These polymers are soluble in most of the aprotic organic solvents such as N-methyl-2-pyrrolidone, N,N-dimethylformamide, dimethylsulfoxide, N,N-dimethylacetamide, hexamethylphosphoramide, m-cresol, and pyridine. The prepared polymers were characterized by viscometry, FT-IR, ¹H NMR, and UV-Vis spectroscopy, fluorimetry, elemental analysis; the thermal properties were evaluated by differential scanning calorimetric and thermogravimetric analysis.     

Fluorine containing poly(amide-imide)s: synthesis and formation of Langmuir-Blodgett monolayers

Soluble fluorine containing poly(amide-imide)s, PAI(1-4), were synthesized from diimide-dicarboxylic acid, 2,2-bis[N-(4-carboxyphenyl)-phthalimide-1,4-yl]hexafluoropropane with various diamines by direct polycondensation in N-methyl-2-pyrrolidone (NMP) containing CaCl₂ and using triphenyl phosphite and pyridine as condensing agents. The polymers were readily soluble in aprotic polar solvents such as NMP, N,N-dimethylacetamide, dimethyl sulfoxide and tetrahydrofuran. Their Langmuir monolayers were studied at the air/water interface. The monolayers were generally stable at the water surface and could be reproducibly transferred onto solid substrates to build up Langmuir-Blodgett (LB) multilayers. The LB mono- and multilayers were characterized by ultra-violet/visible spectroscopy (UV-Vis), surface plasmon resonance, atomic force microscopy.     

Preparation and characterization of new thermally stable and optically active poly(ester‐imide)s by direct polycondensation with thionyl chloride in pyridine

4,4′‐hexafluoroisopropylidene‐2,2‐bis‐(phthalic acid anhydride) (1) was reacted with L ‐methionine (2) in acetic acid and the resulting N,N′–(4,4′‐hexafluoroisopropylidenediphthaloyl)‐bis‐L ‐methionine (4) was obtained in high yield. The direct polycondensation reaction of this diacid with several aromatic diols such as bisphenol A (5a), phenolphthalein (5b), 1,4‐dihydroxybenzene (5c), 4,4′‐dihydroxydiphenyl sulfide (5d), 4,6‐dihydroxypyrimidine (5e), 4,4′‐dihydroxydiphenyl sulfone (5f) and 2,4′‐dihydroxyacetophenone (5g) was carried out in a system of thionyl chloride and pyridine. Expecting that the reaction with thionyl chloride in pyridine might involve alternative intermediates different from an acyl chloride, the polycondensation at a higher temperature favorable for the reaction of the expected intermediate with nucleophiles was attempted, and a highly thermally stable poly(ester‐imide) was obtained by carrying out the reaction at 80°C. All of the above polymers were fully characterized by ¹H‐NMR, ¹⁹F‐NMR FT‐IR spectroscopy, elemental analysis and specific rotation. Some structural characterization and physical properties of these optically active poly(ester‐ imide)s are reported. Copyright © 2006 John Wiley & Sons, Ltd.     

Rapid synthesis of optically active poly(amide-imide)s by direct polycondensation of aromatic dicarboxylic acid with aromatic diamines

4,4^′-(Hexafluoroisopropylidene)-N,N^′-bis(phthaloyl-l-leucine-p-amidobenzoic acid) (2) was prepared from the reaction of 4,4^′-(hexafluoroisopropylidene)-N,N^′-bis(phthaloyl-l-leucine) diacid chloride with p-aminobenzoic acid. The direct polycondensation reaction of monomer (2) with p-phenylenediamine (2a), 4,4^′-diaminodiphenylsulfone (2b), 2,4-diaminotoluene (2c), 2,6-diaminopyridine (2d), m-phenylene diamine (2e), benzidine (2f), 4,4^′-diaminodiphenylether (2g) and 4,4^′-diaminodiphenyl methane (2h) was carried out in a medium consisting of triphenyl phosphite, N-methyl-2-pyrolidone, pyridine, and calcium chloride. The homogeneous mixture was heated at 220 °C for 1 min under nitrogen. The resulting poly(amide-imide)s (PAIs) having inherent viscosities 0.27-0.78 dl/g were obtained in high yield and are optically active and thermally stable. All of the above polymers were fully characterized by IR spectroscopy, elemental analyses and specific rotation. Some structural characterization and physical properties of this new optically active PAIs are reported.     

Novel optically active poly(amide-imide)s from N,N-(4,4-carbonyldiphthaloyl)-bis-l-phenylalanine diacid chloride and aromatic diamines by microwave irradiation

3,3^′,4,4^′-benzophenonetetracarboxylic dianhydride (4,4^′-carbonyldiphthalic anhydride) (1) was reacted with l-phenylalanine (2) in a mixture of acetic acid and pyridine (3:2) and the resulting imide-acid [N,N^′-(4,4^′-carbonyldiphthaloyl)-bis-l-phenylalanine diacid] (4) was obtained in high yield. The compound (4) was converted to the N,N^′-(4,4^′-carbonyldiphthaloyl)-bis-l-phenylalanine diacid chloride (5) by reaction with thionyl chloride. A new facile and rapid polycondensation reaction of this diacid chloride (5) with several aromatic diamines such as 4,4^′-diaminodiphenyl methane (6a), 2,4-diaminotoluene (6b), 4,4^′-sulfonyldianiline (6c), p-phenylenediamine (6d), 4,4^′-diaminodiphenylether (6e), m-phenylenediamine (6f), benzidine (6g) and 2,6-diaminopyridine (6h) was developed by using a domestic microwave oven in the presence of a small amount of a polar organic medium such as o-cresol. The polymerization reactions proceeded rapidly, compared with the conventional solution polycondensation, and was completed within 7 min, producing a series of optically active poly(amide-imide)s with high yield and inherent viscosity of 0.22-0.52 dl/g. All of the above polymers were fully characterized by IR, elemental analyses and specific rotation. Some structural characterization and physical properties of this optically active poly(amide-imide)s are reported.     

Heat stable and organosoluble benzoxazole or benzothiazole-containing poly(imide-ester)s and poly(etherimide-ester)s: synthesis and characterization

Two series of poly(imide-ester)s (PIEs) and poly(ether-imide-ester)s (PEIEs), having benzoxazole or benzothiazole pendent groups, were conveniently prepared by the diphenylchlorophosphate-activated direct polyesterification of two bis(imide-carboxylic acid)s (1), such as 2-[3,5-bis(N-trimellitimidoyl)phenyl]benzoxazole (1 _O ) and 2-[3,5-bis(Ntrimellitimidoyl) phenyl]benzothiazole (1 _S ) and two bis(imide-ether-carboxylic acid)s (2), such as 2-[3,5-bis(4-trimellitimidophenoxy)-phenyl]benzoxazole (2 _O ), and 2-[3,5-bis(4-trimellitimidophenoxy)-phenyl]benzothiazole (2 _S ) with various aromatic dihydroxy compounds in the presence of pyridine and lithium chloride. The structures, solubilities and thermal properties of obtained polymers were investigated in detail. All of the resulting polymers were characterized by FTIR and ¹H-NMR spectroscopy and elemental analysis. All of the resulting polymers exhibited excellent solubility in common organic solvents, such as pyridine, tetrahydrofuran and m-cresol, as well as in polar organic solvents, such as N-methyl-2-pyrrolidone, N,N-dimethylacetamide, N,N-dimethylformamide and dimethyl sulfoxide. The modified polymers were obtained in quantitative yields with inherent viscosities between 0.47 and 0.67 dl·g^?1. Experimental results indicated that all the polymers had glass transition temperature between 198 °C and 262 °C, the decomposition temperature at 10% weight loss between 398 °C and 531 °C under nitrogen.     

Synthesis and characterization of polyamides derived from (4-(4-(2, 6-diphenylpyridin-4yl)phenoxy)phenyl)-3, 5-diaminobezamide

New types of polyamides containing pendent triaryl pyridine groups were successfully synthesized by direct polycondensation of a symmetry diamine,（4-（4-（2,6-diphenylpyridin-4yl）phenoxy）phenyl）-3,5-diaminobezamide（DPDAB）, and various aromatic and aliphatic dicarboxylic diacids in NMP using triphenyl phosphate（TPP） and pyridine as catalyst. The diamine and all the prepared polyamides were fully characterized by using FT-IR,¹H-NMR,UV-Vis spectroscopy, fluorimetry and elemental analysis.The inherent viscosity of polyamides ranged from 0.45 dL/g to 0.68 dL/g.All the polymers exhibited solubility in common polar aprotic solvents such as NMP,DMAc,DMF,DMSO,pyridine,HMPA,and even in less polar solvents such as THF and m-cresol at room temperature.Thermal properties of polyamides were evaluated by means of DSC,DMTA and TGA.These polymers showed glass transition temperatures（T_g） in the range of 138-210℃. Their initial decomposition temperature（T_i） varied from 265℃to 310℃under N₂.The dilute solution（0.2 g/dL） of polyamides in DMF exhibited fluorescence emission withλ_max in the range of 470-550 nm.     

Studies on synthesis and in vitro biodegradability of novel optically active nanostructure poly(ester-imide)s containing <Emphasis Type="SmallCaps">l</Emphasis>-phenylalanine and <Emphasis Type="SmallCaps">l</Emphasis>-isoleucine linkages

A series of biodegradable functional amino-acid-based poly(ester-imide)s (PEI)s were designed and synthesized by the direct polycondensation reaction of chiral diacids composed of naturally occurring α-amino acids with 4,4′-thiobis(2-tert-butyl-5-methylphenol) in the presence of tosyl chloride, pyridine, and N,N-dimethylformamide as a condensing agent. These new chiral polymers were characterized with respect to chemical structure and purity using specific rotation experiments, FT-IR, ¹H-NMR, techniques, and elemental analysis. The surface morphology of these polymers was investigated by field emission scanning electron microscopy. The result indicated nanoscale morphology of the obtained polymers. Thermal stability and the weight loss behavior of the resulting PEIs were studied by TGA techniques. All PEIs showed no significant weight loss below 400 °C in a N₂ environment. The monomers and prepared polymers were co-cultivated with airborne fungal spores in culture media to study their biological activity. Soil burial test was also used for evaluation of their biodegradation behavior. The results showed that the synthesized monomers and their derived polymers are biologically active and that their degradation products are probably nontoxic to microbial growth.     

New poly(amide-imide)s syntheses. VII. Preparation and properties of poly(amide-imide)s derived from 1,5-bis(4-aminophenoxy) naphthalene,trimellitic anhydride,and various aromatic diamines

New bis(phenoxy)naphthalene-containing poly(amide-imide)s having an inherent viscosity in the range of 0.62–1.09 dL/g were prepared by the direct polycondensation of 1,5-bis(4-trimellitimidophenoxy) naphthalene ( I ) and various aromatic diamines using triphenyl phosphite and pyridine as condensing agents in N-methyl-2-pyrrolidone (NMP) in the presence of calcium chloride. The diimide-diacid (I) was prepared by the condensation of 1,5-bis(4-aminophenoxy) naphthalene and trimellitic anhydride. Most of the polymers were soluble in aprotic solvents such as NMP and N,N-dimethylacetamide (DMAc), and afforded transparent, flexible and tough films upon casting from DMAc solutions. Measurements of wide-angle X-ray diffraction revealed that those polymers containing p-phenylene or oxyphenylene groups were characterized as crystalline polymers. Tensile strength and initial moduli of the polymer films ranged from 61–86 MPa and 1.83–2.21 GPa, respectively. Glass transition temperatures of the polymers were in the range of 231–340°C. The melting points of the crystalline polymers ranged from 375–430°C. The 10% weight loss temperatures were above 512°C in nitrogen and 481°C in air. © 1993 John Wiley & Sons, Inc.     

Preparation and properties of aromatic poly(amide-imide)s derived from N-[3,5-bis(3,4-dicarboxybenzamido)phenyl]phthalimide dianhydride

An imide ring-containing diamide-dianhydride, N-[3,5-bis(3,4-dicarboxybenzamido)phenyl]phthalimide dianhydride (1) was prepared by the reaction of trimellitic anhydride chloride with N-(3,5-diaminophenyl)phthalimide in a medium consisting of methylene chloride and pyridine. A series of new alternating aromatic poly(amide-imide)s having inherent viscosities of 0.26-0.37 dl/g was synthesized using a two-step poly(amic-acid) precursor method. A reference monomer, 1,3-bis(3,4-dicarboxybenzamido)benzene dianhydride (2) without the phthalimido pendant group attached to the polymer main chain was prepared in order to study the structure-property relationship. In this case, the structure effects on some properties of the resulting poly(amide-imide)s including crystallinity, solubility, thermal stability, and film flexibility could be easily clarified. A diamide-triimide (3) as a model compound was also synthesized by the reaction of new dianhydride 1 with aniline to compare the characterization data as well as to optimize the polymerization conditions. The resulting polymers were fully characterized by FT-IR, UV-visible and ¹H NMR spectroscopy. Most of the polymers showed an amorphous nature and were readily soluble in a variety of organic solvents such as N,N-dimethylacetamide (DMAc), N,N-dimethylformamide (DMF), dimethyl sulfoxide (DMSO), N-methyl-2-pyrrolidone (NMP), and pyridine. The glass-transition temperatures of these polymers were recorded between 301 and 371 °C. All polymers showed no significant weight loss below 500 °C in nitrogen, and the decomposition temperatures at 10 wt.% loss range from 506 to 543 °C. The films of the resulting poly(amide-imide)s could be cast from their NMP solutions, and the transparency and flexibility of them were investigated.     

Synthesis and properties of polyamides of 3,3′-dimethylnaphthidine and its model compounds

A number of polyamides and model amides based on 3,3′-dimethylnaphthidine and various dicarboxylic acids were synthesized in N-methylpyrrolidone containing lithium chloride either by low temperature solution or by direct polycondensation using triphenyl phosphite and pyridine. The polyamides had inherent viscosities of 0.36?5.42 dL g^?1 and were, in general, readily soluble in N-methylpyrrolidone. Amorphous members exhibited relatively high glass transition temperatures in the range of 340–380 and 200–230°C for aromatic and aliphatic polymers, respectively. All polyamides showed good thermal stability in nitrogen and in air.     

Synthesis and characterization of novel poly(amide-imide)s containing hexafluoroisopropylidene linkage

A series of novel soluble poly(amide-imide)s were prepared from the diimide-dicarboxylic acid, 2,2-bis[N-(4-carboxyphenyl)-phthalimidyl]hexafluoropropane, with various diamines by the direct polycondensation in N-methyl-2-pyrrolidinone containing CaCl₂ using triphenyl phosphite and pyridine as condensing agents. All the polymers were obtained in quantitative yields with inherent viscosities of 0.78–1.63 dL g⁻¹. The polymers were amorphous and readily soluble in aprotic polar solvents such as N-methyl-2-pyrrolidinone, N,N-dimethylacetamide, N,N-dimethylformamide, and dimethyl sulfoxide as well as in less polar solvents such as pyridine and γ-butyrolactone, and also in tetrahydrofuran. The polymer films had tensile strength of 84–129 MPa, an elongation at break range of 6–22%, and a tensile modulus range of 2.0–2.7 GPa. The glass transition temperatures of the polymers were determined by DSC method and they were in the range of 240–282°C. These polymers were fairly stable up to a temperature around or above 400°C, and lose 10% weight in the range of 450–514°C and 440–506°C in nitrogen and air, respectively. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2629–2635, 1999     

New optically active poly（amide-imide）s derived from N, N′-（4,4-diphthaloyl）-bis-L-leucine and hydantoin derivatives： Synthesis and properties

Six new optically active poly(amide-imide)s(5a-f) were synthesized through the direct polycondensation reaction of N,N'-(4,4'- diphthaloyl)-bis-L-leucine(3) with six hydantoin derivatives(4a-f).Triphenyl phosphite(TPP)/pyridine in the presence of calcium chloride(CaCl_2) and N-methyl-2-pyrrolidone(NMP) were successfully applied for direct polycondensation.The polycondensation reactions produce a series of new poly(amide-imide)s(5a-f) in high yields,and inherent viscosity between 0.42 and 0.55 dL/g.The re...     

New poly(amide-imide) syntheses. XII. Preparation and properties of poly(amide-imide)s based on the diimide-diacid condensed from 9,9-bis[4-(4-aminophenoxy)phenyl] fluorene and trimellitic anhydride

A dicarboxylic acid ( I ) was prepared from the condensation of 9,9-bis[4-(4-aminophenoxy) phenyl] fluorene and trimellitic anhydride. A new family of poly(amide-imide)s having inherent viscosities of 0.75-1.04 dL/g was prepared by the triphenyl phosphite activated polycondensation from the diimide-diacid I with various aromatic diamines in a medium consisting of N-methyl-2-pyrrolidone (NMP), pyridine, and calcium chloride. Most of the resulting polymers showed an amorphous nature and were readily soluble in polar solvents such as NMP and N,N-dimethylacetamide. All the soluble poly(amide-imide)s afforded transparent, flexible, and tough films. The glass transition temperatures of these polymers were in the range of 262–325°C and the 10% weight loss temperatures were above 525°C in air. © 1994 John Wiley & Sons, Inc.