Synthesis and properties of polymeric analogs of ionic liquids

A number of methacrylate ionic monomers with different structures and mobilities of ionic centers were synthesized. The free-radical polymerization of these monomers in solution affords high-molecular-mass (M _sD = 0.5 to 2.5 × 10⁶) thermally stable (T _dec > 170°C) polyelectrolytes or cationic or anionic “polymeric ionic liquids.” The conductivities of polycation- and polyanion-derived coatings are (7.4 × 10^?10)?(7.6 × 10^?7) and (4.9 × 10^?10)-(1.6 × 10^?7) S/cm (25°C), respectively. As exemplified by poly(1-[3-(methacryloyloxy)propyl]-3-methylimidazolium bis[(trifluoromethanesulfonyl)imide]), the molecular mass and glasstransition temperature of the polymer affect the ionic conductivity of the film coating. The transition from linear polyelectrolytes to crosslinked systems based on ionic monomers and poly(ethylene glycol dimethacrylate) 750 leads to the formation of elastic films featuring satisfactory strength, reduced glass-transition temperatures (?8 to +15°C), and increased ionic conductivity (up to 3.2 × 10^?6 S/cm (25°C)).     

Synthesis and thermal behavior of new poly(ethylene terephthalate‐imide)s

Copoly(ethylene terephthalate‐imide)s (PETIs) were synthesized by the melt copolycondensation of bis(2‐hydroxyethyl)terephthalate with a new imide monomer, N,N′‐bis[p‐(2‐hydroxyethoxycarbonyl)phenyl]‐biphenyl‐3,3′,4,4′‐tetracarboxydiimide (BHEI). The copolymers were characterized by intrinsic viscosity, Fourier transform infrared, ¹H NMR, differential scanning calorimetry, and thermogravimetric analysis techniques. Although their crystallinities decreased as the content of BHEI units increased, the glass‐transition temperatures (T_g) increased significantly. When 5 or 10 mol % BHEI units were incorporated into poly(ethylene terephthalate), T_g increased by 10 or 24 °C, respectively. The thermal stabilities of PETI copolymers were about the same as the thermal stability of PET, whereas the weight loss of PETIs decreased as the content of BHEI units increased. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 408–415, 2001     

Synthesis and self-organization of amphiphilic poly(<Emphasis Type="Italic">N</Emphasis>-vinylpyrrolidone-2,2,3,3-tetrafluoropropyl methacrylate) diblock copolymers in solution and bulk

It is shown that the amphiphilic diblock copolymers poly(N-vinylpyrrolidone-2,2,3,3-tetrafluoropropyl methacrylate) can be prepared through the reaction of chain transfer to bis(pentafluorophenyl)germane during the polymerization of N-vinylpyrrolidone and the subsequent postpolymerization of isolated functional polymers in 2,2,3,3-tetrafluoropropyl methacrylate. The dilute-solution behavior and self-organizing ability of functional polymers based on poly(N-vinylpyrrolidone) containing end bis(pentafluorophenyl) groups and of amphiphilic diblock copolymers formed on their basis are studied via the methods of static and dynamic light scattering and viscometry. Surface properties at the interface of the films are estimated through the wetting technique.     

Synthesis and characterization of highly soluble aromatic polyimides

Two highly soluble aromatic polyimides were synthesized successfully from a diamine with two tert-butyl groups （MBTBA）and dianhydrides with a thioether or sulfone moiety（DTDA and DSDA）.Both of them showed excellent solubility in common solvents such as chloroform,tetrahydrofuran and dioxane at the room temperature.The number-average molecular weight was 6.0×10⁴ and 8.3×10⁴ according to gel permeation chromatography relative to a polystyrene standard,and the polydispersity index was 1.80 and 1.82 respectively.The glass-transition temperatures of them were 286℃and 314℃（or 315℃and 358℃）respectively,as measured by differential scanning calorimetry（or dynamic mechanical analysis）.The 5%weight loss temperature of both was near 490℃in N₂ by thermogravimetric analysis.These results indicated that the tert-butyl pendent groups reduced the interactions among polymer chains and the thioether or sulfone moiety was flexible which may improve their solubility in conventional organic solvents without the loss of thermal stability. Transparent and flexible films of the two polyimides were obtained via solution casting.The MBTBA-DTDA membrane had higher storage moduli than those of the MBTBA-DSDA membrane.     

Synthesis and characterization of siloxane resins derived from silphenylene‐siloxane copolymers bearing benzocyclobutene pendant groups

Two bis(dimethylamimo)silanes with benzocyclobutene (BCB) groups, bis(dimethylamino)methyl(4′‐benzocyclobutenyl)silane ( 2 ) and bis(dimethylamino)methyl [2′‐(4′‐benzocyclobutenyl)vinyl]silane ( 4 ), were synthesized from different synthetic routes, which were then employed to prepare two novel silphenylene‐siloxane copolymers (SiBu and SiViBu) bearing latent reactive BCB groups by polycondensation procedure with 1,4‐bis(hydroxydimethylsilyl)benzene. At elevated temperatures these copolymers were readily converted to highly crosslinked films and molding disks with network structures by polymer chain crosslinking, which followed the first‐order kinetic reaction model. The final resins of SiBu and SiViBu demonstrated excellent thermal stability with high glass transition temperatures (218 and 256 °C) and high temperatures at 5% weight loss (553 and 526 °C in N₂, 530 and 508 °C in air). After aging at 300 °C in air for 100 h, the cured resins showed weight loss lower than 4%. The films of cured SiBu and SiViBu also exhibited relatively low dielectric constants of 2.66 and 2.64, low dissipation factors of 2.23 and 2.12 × 10^?3, low water absorptions (≤0.28%), and high transparence in the visible region with cutoff wavelengths of 321 and 314 nm. Moreover, the aged films exhibited good dielectric properties and low water absorptions. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7868–7881, 2008     

Poly(ethylene terephthalate) copolymers containing 5‐nitroisophthalic units. I. Synthesis and characterization

Poly(ethylene terephthalate‐co‐5‐nitroisophthalate) copolymers, abbreviated as PETNI, were synthesized via a two‐step melt copolycondensation of bis(2‐hydroxyethyl) terephthalate and bis(2‐hydroxyethyl) 5‐nitroisophthalate mixtures with molar ratios of these two comonomers varying from 95/5 to 50/50. Polymerization reactions were carried out at temperatures between 200 and 270 °C in the presence of tetrabutyl titanate as a catalyst. The copolyesters were characterized by solution viscosity, GPC, FTIR, and NMR spectroscopy. They were found to be random copolymers and to have a comonomer composition in accordance with that used in the corresponding feed. The copolyesters became less crystalline and showed a steady decay in the melting temperature as the content in 5‐nitroisophthalic units increased. They all showed glass‐transition temperatures superior to that of PET with the maximum value at 85 °C being observed for the 50/50 composition. PETNI copolyesters appeared stable up to 300 °C and thermal degradation was found to occur in two well‐differentiated steps. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1934–1942, 2000     

Linear-Dendritic Block Copolymers Based on <Emphasis Type="Italic">N</Emphasis>-Isopropylacrylamide and Perfluorinated Polyphenylenegermane: Synthesis and Properties at Various Interfacial Boundaries

It is shown that linear-dendritic block copolymers poly(N-isopropylacrylamide)–block–polyphenylenegermane can be prepared by the polymerization of N-isopropylacrylamide in the presence of bis(pentafluorophenyl)germane followed by activated polycondensation with tris(pentafluorophenyl)germane. The properties of the dilute solutions and Langmuir monolayers of the functional polymers and the linear-dendritic block copolymers of N-isopropylacrylamide are studied.     

Preparation and characterization of branched and linear sulfonated poly(ether ketone sulfone) proton exchange membranes for fuel cell applications

Branched sulfonated poly(ether ketone sulfone)s (Br‐SPEKS) were prepared with bisphenol A, bis(4‐fluorophenyl)sulfone, 3,3′‐disodiumsulfonyl‐4,4′‐difluorobenzophenone, and THPE (1,1,1‐tris‐p‐hydroxyphenylethane), respectively, at 180 °C using potassium carbonate in NMP (N‐methylpyrrolidinone). THPE, as a branching agent, was used with 0.4 mol % of bisphenol A to synthesize branched copolymers. Copolymers containing 10–50 mol % disulfonated units were cast from dimethylsulfoxide solutions to form films. Linear sulfonated poly(ether ketone sulfone)s (SPEKS) were also synthesized without THPE. The films were converted from the salt to acid forms with dilute hydrochloric acid. A series of copolymers were studied by Fourier transform infrared, ¹H‐NMR spectroscopy, differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA). Sorption experiments were conducted to observe the interaction of sulfonated polymers with water and methanol. The ion‐exchange capacity (IEC), a measure of proton conductivity, was evaluated. The synthesized Br‐SPEKS and SPEKS membranes exhibit conductivities (25 °C) from 1.04 × 10^?3 to 4.32 × 10^?3 S/cm, water swell from 20.18 to 62.35%, IEC from 0.24 to 0.83 mequiv/g, and methanol diffusion coefficients from 3.2 × 10^?7 to 4.7 × 10^?7 cm²/S at 25 °C. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1792–1799, 2008     

Poly(ethylene terephthalate) copolymers containing 5‐nitroisophthalic units. III. Methanolytic degradation

The methanolysis of poly(ethylene terephthalate) (PET) copolymers containing 5‐nitroisophthalic units was investigated. Random copolyesters containing 10 and 30 mol % of such units were prepared via a two‐step melt copolycondensation of bis(2‐hydroxyethyl) terephthalate (BHET) and bis(2‐hydroxyethyl) 5‐nitroisophthalate (BHENI) in the presence of tetrabutyl titanate as a catalyst. First, the susceptibility of these two comonomers toward methanolysis was evaluated, and their reaction rates were estimated with high‐performance liquid chromatography. BHENI appeared to be much more reactive than both BHET and bis(2‐hydroxyethyl) isophthalate. The methanolysis of PET and the copolyesters was carried out at 100 °C, and the degradation process was followed by changes in the weight and viscosity, gel permeation chromatography, differential scanning calorimetry, and ¹H and ¹³C NMR spectroscopy. The copolyesters degraded faster than PET, and the rate of degradation increased with the content of nitrated units. The products resulting from methanolysis were concluded to be dimethyl terephthalate, dimethyl 5‐nitroisophthalate, ethylene glycol, and small, soluble oligomers. For both PET and the copolyesters, an increase in crystallinity was observed during the degradation process, indicating that methanolysis preferentially occurred in the amorphous phase. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 76–87, 2002     

Synthesis of poly(aryl ether ketone)s containing diphenyl moieties by electrophilic Friedel–Crafts solution polycondensation

A new monomer, 4,4′‐bis(4‐phenoxybenzoyl)diphenyl (BPOBDP), was prepared by Friedel–Crafts reaction of 4‐bromobenzoyl chloride and diphenyl, followed by condensation with potassium phenoxide. Novel poly(ether ketone ketone) (PEKK)/poly(ether ketone diphenyl ketone ether ketone ketone) (PEKDKEKK) copolymers were synthesized by electrophilic Friedel–Crafts solution copolycondensation of isophthaloyl chloride (IPC) with a mixture of diphenyl ether (DPE) and BPOBDP, in the presence of anhydrous aluminum chloride and N‐methyl‐pyrrolidone (NMP) in 1,2‐dichloroethane (DCE). The copolymers obtained were characterized by various analytical techniques such as FT‐IR, DSC, TGA, and wide‐angle X‐ray diffraction (WAXD). The results showed that the resulting copolymers exhibited excellent thermal stability due to the existence of diphenyl moieties in the main chain. The glass transition temperatures are above 152°C, the melting temperatures are above 276°C, and the temperatures at a 5% weight loss are above 548°C in nitrogen. The copolymers with 50–70 mol% BPOBDP had tensile strengths of 101.5–102.7 MPa, Young's moduli of 3.23–3.41 GPa, and elongations at break of 12–17%. All these copolymers were semicrystalline and insoluble in organic solvents. Copyright © 2008 John Wiley & Sons, Ltd.     

Synthesis and surface properties of amphiphilic block copolymers polyvinylpyrrolidone-block-polystyrene

Amphiphilic block copolymers of N-pyrrolidone and styrene were prepared by chain transfer to organogermanium compounds bis(pentafluorophenyl)germane and tris(pentafluorophenyl)germane. The relative chain-transfer constants were determined. The surface properties of the isolated block copolymers with various numbers of units in the hydrophilic block were studied. The polar and dispersive components of the surface tension of films of the amphiphilic block copolymers were calculated by the Zisman method.     

Synthesis of copolymers of poly(ether sulfone ether ketone ketone) and poly(ether ketone diphenyl ketone ether ketone ketone) by electrophilic Friedel–Crafts solution polycondensation

A new monomer, 4,4′‐bis(4‐phenoxybenzoyl)diphenyl(BPOBDP), was synthesized via a two‐step synthetic procedure. A series of novel poly(ether sulfone ether ketone ketone)/poly(ether ketone diphenyl ketone ether ketone ketone) copolymers were prepared by electrophilic Friedel–Crafts solution copolycondensation of isophthaloyl chloride (IPC) with a mixture of 4,4′‐diphenoxydiphenylsulfone (DPODPS) and 4,4′‐bis(4‐phenoxybenzoyl)diphenyl (BPOBDP), in the presence of anhydrous aluminum chloride and N‐methylpyrrolidone (NMP) in 1,2‐dichloroethane (DCE). The copolymers with 10–50 mol% DPODPS are semicrystalline and have remarkably increased T_gs over commercially available PEEK and PEKK. The copolymers with 40–50 mol% DPODPS had not only high T_gs of 170–172°C, but also moderate T_ms of 326–333°C, which are extremely suitable for melt processing. These copolymers have tensile strengths of 96.5–108.1 MPa, Young's moduli of 1.98–3.05 GPa, and elongations at break of 13–26% and exhibit excellent thermal stability and good resistance to acidity, alkali, and common organic solvents. Copyright © 2009 John Wiley & Sons, Ltd.     

Synthesis and properties of novel sulfonated polyimides containing binaphthyl groups as proton‐exchange membranes for fuel cells

A novel sulfonated diamine monomer, 2,2′‐bis(p‐aminophenoxy)‐1,1′‐binaphthyl‐6,6′‐disulfonic acid (BNDADS), was synthesized. A series of sulfonated polyimide copolymers containing 30–80 mol % BNDADS as a hydrophilic component were prepared. The copolymers showed excellent solubility and good film‐forming capability. Atomic force microscopy phase images clearly showed hydrophilic/hydrophobic microphase separation. The relationship between the proton conductivity and degree of sulfonation was examined. The sulfonated polyimide copolymer with 60 mol % BNDADS showed higher proton conductivity (0.0945–0.161 S/cm) at 20–80 °C in liquid water. The membranes exhibited methanol permeability from 9 × 10^?8 to 5 × 10^?7 cm²/s at 20 °C, which was much lower than that of Nafion (2 × 10^?6cm²/s). The copolymers were thermally stable up to 300 °C. The sulfonated polyimide copolymers with 30–60 mol % BNDADS showed reasonable mechanical strength; for example, the maximum tensile strength at break of the sulfonated polyimide copolymer with 40 mol % BNDADS was 80.6 MPa under high moisture conditions. The optimum concentration of BNDADS was found to be 60 mol % from the viewpoint of proton conductivity, methanol permeability, and membrane stability. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 222–231, 2007     

Properties of Methacrylic Acid–Methyl Acrylate Copolymers of Varied Structure

Physicomechanical and surface properties of films of copolymers of methacrylic acid with methyl acrylate, which have close compositions and molecular masses (M_n ≈ 5.7 × 10⁴) and various chain structures (gradient copolymer and statistical copolymer), were studied. The thermodynamic characteristics of the copolymers were determined; two glass-transition points (29.6 and 141.0°C) were found for the gradient copolymer, and one glass-transition point of 40.1°C, for the copolymer with a statistical distribution of units along the chain. It was found that more mechanically strong films with tensile stress of 2.8 MPa are characteristic of the gradient copolymer. The wetting method was used to determine by using the Hood–Kaelble–Dann–Fowkes approach the surface Gibbs energies of the films and their polar and dispersion components. Atomic-force microscopy was used to find heterogeneities (0.1–0.3 μm) on the surface of a film of a statistical copolymer, whereas the film of a gradient polymer has a homogeneous structure.     

Synthesis of sulfonated poly(imidoaryl ether sulfone) membranes for polymer electrolyte membrane fuel cells

New sulfonated poly(imidoaryl ether sulfone) copolymers derived from sulfonated 4,4′‐dichlorodiphenyl sulfone, 4,4′‐dichlorodiphenyl sulfone, and imidoaryl biphenol were evaluated as polymer electrolyte membranes for direct methanol fuel cells. The sulfonated membranes were characterized with Fourier transform infrared spectroscopy, thermogravimetric analysis, and proton nuclear magnetic resonance spectra. The state of water in the membranes was measured with differential scanning calorimetry, and the existence of free water and bound water was discussed in terms of the sulfonation level. The 10 wt % weight loss temperatures of these copolymers were above 470 °C, indicating excellent thermooxidative stability to meet the severe criteria of harsh fuel‐cell conditions. The proton conductivities of the membranes ranged from 3.8 × 10^?2 to 5 × 10^?2 S/cm at 90 °C, depending on the degree of sulfonation. The sulfonated membranes maintained the original proton conductivity even after a boiling water test, and this indicated the excellent hydrolytic stability of the membranes. The methanol permeabilities ranged from 1.65 × 10^?8 to 5.14 × 10^?8 cm²/s and were lower than those of other conventional sulfonated ionomer membranes, particularly commercial perfluorinated sulfonated ionomer (Nafion). The properties of proton and methanol transport were discussed with respect to the state of water in the membranes. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5620–5631, 2005     

Newtonian behavior of a styrene–butadiene–styrene block copolymer

The melt rheological behavior of an anionically polymerized styrene–butadiene–styrene (SBS) block copolymer sample (S: 7 × 10³ and B: 43 × 10³) was studied using a Weissenberg rheogoniometer. Highly non-Newtonian behavior, high viscosity and high elasticity, which are characteristics of ABA type block copolymers, were observed at 125°C, 140°C, and 150°C. The data at these temperatures superimposed well onto a master curve giving a constant flow activation energy. However, the data at 175°C indicated a marked change in the flow mechanism between 150°C and 175°C. At 175°C, the sample showed Newtonian behavior, negligible elasticity, and deviation from the master curve. These findings may be considered as an indication that the SBS block copolymer sample undergoes a structural change from a multiphase structure at low temperatures into a homogeneous structure at some temperature between 150°C and 175°C.     

New solid polymer electrolytes based on polyester diacrylate for lithium power sources

New solid polymer electrolytes are developed for a lithium power source used at the temperatures up to 100°C. Polyester diacrylate (PEDA) based on oligohydroxyethylacrylate and its block copolymers with polyethylene glycol were offered for polymer matrix formation. The salt used was LiClO₄. The ionic conductivity of electrolytes was measured in the range of 20 to 100°C using the electrochemical impedance method. It is shown that the maximum conductivity in the whole temperature range is characteristic of the electrolyte based on the PEDA copolymer and polyethylene glycol condensation product (2.8 × 10^?6 S cm^?1 at 20°C, 1.8 × 10^?4 S cm^?1 at 95°C).     

Homo‐ and copolymerization of norbornene and 5‐norbornene‐2‐yl acetate with bis‐(β‐ketonaphthylamino)palladium(II)/B(C6F5)3 catalytic system

The polymerization of norbornene with bis(β‐ketonaphthylamino) palladium(II), Pd{CH₃C(O)CHC[N(naphthyl)]CH₃}₂, in combination with tris(pentafluorophenyl)borane (B(C₆F₅)₃), was investigated by varying the B:Pd(II) molar ratio, monomer concentration, reaction temperature, and time. The catalytic activity was found to reach 2.8 × 10⁴ gPolymer/(molPd^?h) and the obtained polynorbornene (PNBE) was confirmed to be vinyl addition polymer and showed good thermo‐stability (T_dec > 350°C), but exhibited poor solubility in organic solvents due to the relative higher stereo regularity. Pd{CH₃C(O)CHC[N(naphthyl)]CH₃}₂/B(C₆F₅)₃ system is also an active catalyst for copolymerization of norbornene and 5‐norbornene‐2‐yl acetate (NBE‐OCOCH₃) in toluene with moderate yields (in 9.2–36.5% yields) and produces the addition‐type copolymer with relatively high molecular weights (0.96 × 10⁴–2.13 × 10⁴ g/mol). The incorporation of functional group in the copolymer can be controlled up to 0.9–23.5 mol% by varying the NBE‐OCOCH₃ monomer feed ratios from 10 to 90%. The copolymers are proved to be noncrystalline and show good solubility in common organic solvents and excellent thermal stability up to 350°C. Copyright © 2011 John Wiley & Sons, Ltd.     

Novel polymer electrolytes prepared by copolymerization of ionic liquid monomers

Ionic liquid monomer couples were prepared by the neutralization of 1‐vinylimidazole with vinylsulfonic acid or 3‐sulfopropyl acrylate. These ionic liquid monomer couples were viscous liquid at room temperature and showed low glass transition temperature (Tg) at ?83 °C and ?73 °C, respectively. These monomer couples were copolymerized to prepare ion conductive polymer matrix. Thus prepared ionic liquid copolymers had no carrier ions, and they showed very low ionic conductivity of below 10^?9 S cm^?1. Equimolar amount of lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) to imidazolium salt unit was then added to generate carrier ions in the ionic liquid copolymers. Poly(vinylimidazolium‐co‐vinylsulfonate) containing equimolar LiTFSI showed the ionic conductivity of 4 × 10^?8 S cm^?1 at 30 °C. Advanced copolymer, poly(vinylimidazolium‐co‐3‐sulfopropyl acrylate) which has flexible spacer between the anionic charge and polymer main chain, showed the ionic conductivity of about 10^?6 S cm^?1 at 30 °C, which is 100 times higher than that of copolymer without spacer. Even an excess amount of LiTFSI was added, the ionic conductivity of the copolymer kept this conductivity. This tendency is completely different from the typical polyether systems. Copyright © 2002 John Wiley & Sons, Ltd.     

Macromolecular-chain rearrangement during synthesis of poly(N-phenylurethanes)

Poly(N-phenyliminocarbonates) capable of converting into poly(N-phenylurethanes) via thermal treatment at 300°C for 9 h through the Chapman mechanism were prepared via the polycondensation of bisphenols with plenyliminophosgene. The resulting polymers are soluble in chlorinated hydrocarbons and amide solvents. The polymers are characteristic by glass-transition and 10%-weight-loss temperatures during heating in air of 165–210 and 455–490°C, respectively.