Synthesis and characterization of optically active poly(amide-imide)s containing photosensitive chalcone units in the main chain

<正>A series of new optically active poly(amide-imide)s were synthesized by direct polycondensation reaction of 4,4'-diaminochalcone with several N-trimellitylimido-L-amino acids using a tosyl chloride(TsCl),pyridine(Py) and dimethylformamide(DMF) system as condensing agent.The resulting thermally stable poly(amide-imide)s were obtained in good to high yields and inherent viscosities ranging between 0.35 dL/g and 0.58 dL/g and were characterized with FTIR, ~1H-NMR,CHN,Ultraviolet,TGA and DTG techniques.     

Novel optically active poly(amide-imide)s derived from L-aspartic acid

2,6-Bis-(2,5-dioxo-tetrahydro-N-(4-carboxyphenyl)pyrrol-3-yl)-pyrrolo[3,4-f]isoindole-1,3,5,7-teraone, a chiral diacid, was prepared from pyromellitic anhydride and L-aspartic acid in a three steps reaction pathway. The polycondensation reactions of the monomer with aromatic diamines were carried out in direct condensation reaction conditions. The synthesized poly(amide-imide)s had inherent viscosities in the range of 0.30–0.80 dl/g. Identification of all of the products were performed by conventional analytical techniques such as TLC, IR and ¹H NMR/¹³C MR spectroscopy. Thermoanalytical techniques (TGA/DSC) showed useful levels of thermal stability, associated with relatively high glass transition temperatures and carbonized residues in excess of 40% at 600°C for the synthesized polymers. Amorphous morphology was obtained based on XRD patterns and DSC traces. The polymers were soluble in a variety of polar organic solvents and afforded transparent and relatively flexible to brittle films by solution casting.     

Microwave-assisted rapid synthesis of novel optically active poly(amide-imide)s containing hydantoins and thiohydantoins in main chain

Rapid and highly efficient synthesis of novel optically active poly(amide-imide)s (PAIs) 6(a-f) was achieved using microwave irradiation. These were made from the polycondensation reactions of 4,4^′-carbonyl-bis(phthaloyl-l-alanine) diacid chloride [N,N^′-(4,4^′-carbonyldiphthaloyl)] bisalanine diacid chloride 5 with six different derivatives of hydantoin and thiohydantoin compounds 4(a-f) in the presence of a small amount of a nonpolar organic medium that acts as a primary microwave absorber. Hydantoin and thiohydantoin derivatives 4(a-e) were synthesis from the reactions between benzil or benzil derivatives 3(a-e) with urea and thiourea. 5,5-Dimethylhydantoin 4f was synthesis from the reactions between acetone cyanohydrin 3f and ammonium carbonate. The polycondensation proceeded rapidly, and was completed within 10 min giving a series of PAIs with an inherent viscosity about 0.25-0.45 dL/g. The resulting PAIs 6(a-f) were obtained in a high yield and were optically active and thermally stable. All of the above compounds were fully characterized by means of Fourier transform infrared spectroscopy, elemental analyses, inherent viscosity (η_inh), solubility tests and specific rotation. Thermal properties of the PAIs 6(a-f) were investigated using thermal gravimetric analysis.     

Synthesis and characterization of novel optically active poly(amide-imide)s via direct amidation

N,N′-Pyromelliticdiimido-di-l-methionine (3) was prepared from the reaction of pyromellitic dianhydride (1) with l-methionine (2) in glacial acetic acid and pyridine solution at refluxing temperature. The direct polycondensation reaction of the monomer diimide-diacid (3) with 1,3-phenylenediamine (4a), 1,4-phenylenediamine (4b), 2,6-diaminopyridine (4c), 3,5-diaminopyridine (4d), 4,4′-diaminodiphenylether (4e) and 4,4′-diaminodiphenylsulfone (4f) was carried out in a medium consisting of triphenyl phosphate, N-methyl-2-pyrolidone, pyridine and calcium chloride. The resulting poly(amide-imide)s having inherent viscosities 0.45-0.53 dl g⁻¹ were obtained in high yields and are optically active and thermally stable. All of the above compounds were fully characterized by IR spectroscopy, elemental analyses and specific rotation. Some structural characterization and physical properties of these new optically active poly(amide-imide)s are reported.     

New optically active and thermally stable poly(ester-imide)s containing bicyclo segment in the main chain: Synthesis and characterization

New optically active diacid containing L-2-aminobutyric acid moiety was prepared by reacting bicyclo[2,2,2]oct-7-ene-2,3,5,6-tetracarboxylic dianhydride 1, with L-2-aminobutyric acid 2 in the acetic acid, and was polymerized with several aromatic diols 5a–f to obtain a new series of optically active poly(ester-imide)s (PEIs) through direct polycondensation using tosyl chloride/pyridine/N,N-dimethylformamide system as condensation agent. The data obtained by these methods indicate that, good yields and inherent viscosities are resulted. These polymers are readily soluble in polar organic solvents such as N,N-dimethyacetamide, N,N-dimethyformamide, dimethyl sulfoxide. The obtained polymers were characterized by FTIR, specific rotation measurements, elemental analysis and ¹H NMR spectroscopy. The thermal stability of the resulting PEIs were evaluated with thermogravimetric analysis and differential scanning calorimetry techniques under a nitrogen atmosphere.     

Synthesis and characterization of new optically active poly(amide‐imide)s containing epiclon and L‐methionine moieties in the main chain

Epiclon [3a,4,5,7a‐tetrahydro‐7‐methyl‐5‐(tetrahydro‐2,5‐dioxo‐3‐furanyl)‐1,3‐isobenzofurandione] (1) was reacted with L ‐methionine (2) in acetic acid and the resulting imide‐acid 3 was obtained in high yield. The diacid chloride 4 was prepared from diacid derivative 3 by reaction with thionyl chloride. Thermostable poly(amide‐imide)s containing epiclon structure were synthesized by reacting of diacid chloride 4 with various aromatic diamines. Polymerization reaction was performed by two conventional methods: low temperature solution polycondensation and short period reflux conditions. In order to compare conventional solution polycondensation reaction methods with microwave‐assisted polycondensation, the reactions were also carried out under microwave conditions with a small amount of o‐cresol that acts as a primary microwave absorber. The reaction mixture was irradiated for 6 min with 100% radiation power. Several new optically active poly(amide‐imide)s with inherent viscosity ranging from 0.15 to 0.36 dl/g were obtained with high yield. All of the above polymers were fully characterized by ¹H‐NMR, FT‐IR, elemental analyses and specific rotation techniques. Some structural characterizations and physical properties of these new optically active poly(amide‐imide)s are reported. Copyright © 2005 John Wiley & Sons, Ltd.     

Rapid synthesis of optically active poly(amide-imide)s by direct polycondensation of aromatic dicarboxylic acid with aromatic diamines

4,4^′-(Hexafluoroisopropylidene)-N,N^′-bis(phthaloyl-l-leucine-p-amidobenzoic acid) (2) was prepared from the reaction of 4,4^′-(hexafluoroisopropylidene)-N,N^′-bis(phthaloyl-l-leucine) diacid chloride with p-aminobenzoic acid. The direct polycondensation reaction of monomer (2) with p-phenylenediamine (2a), 4,4^′-diaminodiphenylsulfone (2b), 2,4-diaminotoluene (2c), 2,6-diaminopyridine (2d), m-phenylene diamine (2e), benzidine (2f), 4,4^′-diaminodiphenylether (2g) and 4,4^′-diaminodiphenyl methane (2h) was carried out in a medium consisting of triphenyl phosphite, N-methyl-2-pyrolidone, pyridine, and calcium chloride. The homogeneous mixture was heated at 220 °C for 1 min under nitrogen. The resulting poly(amide-imide)s (PAIs) having inherent viscosities 0.27-0.78 dl/g were obtained in high yield and are optically active and thermally stable. All of the above polymers were fully characterized by IR spectroscopy, elemental analyses and specific rotation. Some structural characterization and physical properties of this new optically active PAIs are reported.     

Synthesis and characterization of poly(benzobisthiazole) with tetramethylbiphenyl moiety in the main chain

Poly(benzobisthiazole)s containing an ortho-tetramethyl substituted biphenyl moiety were synthesized via the polycondensation of 2,5-diamino-1,4-benzenedithiol dihydrochloride with 2,2′,6,6′-tetramethylbiphenyl-4,4′-dicarboxylic acid in poly(phosphoric acid) (PPA). The intrinsic viscosities of the tetramethylbiphenyl poly-(benzobisthiazole)s in chlorosulfonic acid at 30°C were in the range of 6.9–13.4 dL/g. Copolycondensation of 2,5-diamino-1,4-benzenedithiol dihydrochloride with terephthalic acid and 2,2′,6,6′-tetramethylbiphenyl-4,4′-dicarboxylic acid was carried out as well by varying the ratio of the two dicarboxylic acid monomers in the reactant mixture. The homopolymers and copolymers were characterized by Fourier transform infrared spectroscopy (FTIR) and ¹³C solid-state nuclear magnetic resonance spectroscopy (NMR). Thermal stability of the polymers was evaluated by thermogravimetric analysis (TGA) and thermogravimetric mass spectrum analysis (TG-MS). The tetramethylbiphenyl poly(benzobisthiazole)s were found to be more stable at elevated temperatures than the parent poly(p-phenylene benzobisthiazole) (PBZT). © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1407–1416, 1998     

Synthesis and characterization of optically active and organosoluble poly(amide-imide)s containing imidazole rings as pendent groups by direct polycondensation

Six new optically active poly(amide-imide)s(PAIs) 6a-f were prepared by direct polycondensation reaction of N-trimelli-tylimido-L-histidine 4 as a chiral diacid with various aromatic diamines 5a-f.Triphenyl phosphite(TPP)/pyridine(Py) in the presence of calcium chloride(CaCl2) and N-methyl-2-pyrrolidone(NMP) were successfully applied to direct polycondensation reaction.The resulting new polymers were in good yields,and had inherent viscosities ranging between 0.29 and 0.41 dL g-1 and were detected with elem...     

Synthesis of poly(alkylene phosphate)s bearing uracil moiety in the main chain

Poly(alkylene phosphate)s bearing regularly distributed uracil moiety in the main chain have been obtained. The synthetic procedure consists of condensation of bis(diethylamino)-methoxyphosphine with N¹,N³-bis(2′-hydroxyethyl) uracil followed by oxidation, dealkylation, and transformation to the resulting sodium polysalt. The final polymer ($\bar M_n \approx 10^4 $) as well as the intermediate products were characterized by ¹H-, ¹³C-, and ³¹P-NMR spectroscopy.     

Synthesis,characterization, and comparison of properties of new fluorinated poly(arylene ether)s containing phthalimidine moiety in the main chain

Four new poly(arylene ether)s have been prepared by the reaction of N‐phenyl‐3,3‐bis(4‐hydroxyphenyl)phthalimidine (PA) with four different perfluoroalkylated monomers namely 1,3‐bis(4′‐fluoro‐3′‐trifluoromethyl benzyl) benzene, 4,4′‐bis(4′‐fluoro‐3′‐trifluoromethyl benzyl) biphenyl, 2,6‐bis(4′‐fluoro‐3′‐trifluoromethyl benzyl) pyridine, and 2,5‐bis(4′‐fluoro‐3′‐trifluoromethyl benzyl) thiophene. The poly(arylene ether)s were characterized by different spectroscopic, thermal, mechanical, and electrical techniques. The poly(arylene ether) containing quadriphenyl unit in the main chain showed very high glass transition temperature of 291°C and outstanding thermal stability upto 556°C for 10% weight loss under a 4:1 nitrogen:oxygen mixture. The polymers were soluble in a wide range of organic solvents. Transparent thin films of these polymers exhibited tensile strengths upto 75 MPa and elongation at break upto 32%. The films of these polymers showed low water absorption of 0.26%. Copyright © 2009 John Wiley & Sons, Ltd.     

Synthesis and properties of polyimide/silver nanocomposite containing dibenzalacetone moiety in the main chain

A new thermally stable polyimide–silver nanocomposite containing dibenzalacetone moiety in the main chain was synthesized by a convenient ultraviolet irradiation technique. A precursor such as AgNO₃ was used as the source of the silver nanoparticles. Polyimide 6 as a source of polymer was prepared by polycondensation reaction of 2,5-bis(4-aminobenzylidene) cyclopentanone 4 with pyromellitic anhydride 5 in m-cresol solution and in the presence of iso-quinoline as a base. The resulting nanocomposite film was characterized by FTIR spectroscopy, X-ray diffraction (XRD), Scanning electron microscopy (SEM), Thermal gravimetric analyses (TGA), differential gravimetric analyses (DTG) and differential scanning calorimetry (DSC). Scanning electron microscopy (SEM) confirmed the formation and dispersion of silver nanoparticles in polymer matrix having average size of ～20 nm. Incorporation of inorganic metal silver nanoparticles has improved the thermal behavior of the nanocomposite film as compared to pure polyimide film. Also 2,5-bis(4-aminobenzylidene) cyclopentanone 4 was synthesized by using a two-step reaction.     

Study on biodegradability of poly(amide-imide)s containing N-trimellitylimido-L-amino acids and 3,5-diamino-N-(pyridin-3-yl)benzamide linkages

A series of novel biodegradable functional amino acid-based poly(amide-imide)s (PAI)s were designed and synthesized by the direct polycondensation reaction of chiral bioactive diacids composed of naturally occurring α-amino acids with 3,5-diamino-N-(pyridin-3-yl) benzamide in the presence of molten tetrabutylammonium bromide as a green solvent. These new biodegradable polymers were characterized with Fourier transfer infrared and ¹H NMR spectroscopy, field emission scanning electron microscopy. In addition, in vitro toxicity and biodegradability behavior of the starting diacids, diamine and obtained PAIs were investigated in culture media and the results showed that the synthesized monomers and their derived polymers are biologically active and their degradation products are probably nontoxic to microbial growth.     

New optically active poly（amide-imide）s derived from N, N′-（4,4-diphthaloyl）-bis-L-leucine and hydantoin derivatives： Synthesis and properties

Six new optically active poly(amide-imide)s(5a-f) were synthesized through the direct polycondensation reaction of N,N'-(4,4'- diphthaloyl)-bis-L-leucine(3) with six hydantoin derivatives(4a-f).Triphenyl phosphite(TPP)/pyridine in the presence of calcium chloride(CaCl_2) and N-methyl-2-pyrrolidone(NMP) were successfully applied for direct polycondensation.The polycondensation reactions produce a series of new poly(amide-imide)s(5a-f) in high yields,and inherent viscosity between 0.42 and 0.55 dL/g.The re...     

Organosoluble Aliphatic-Aromatic Poly（ether-amide）s Based on Pyridine Moiety in the Main Chain： Synthesis,Characterization and Thermal Studies

A series organosoluble and heterocyclic poly（ether-amide）s （PEA）s were synthesized from a new diamine containing pyridine moiety and four aliphatic-aromatic dicarboxylic acids by direct polycondensation reactions. Dicarboxilic acids 4a-4d containing ether groups were synthesized in two step reactions. At first, dialdehydes 3a-3d were synthesized from four dibromo alkanes la-ld and 4-hydroxybenzaldehyde 2, then dicarboxilic acids 4a-4d were synthesized from dialdehydes 3a-3d and malonic acid in a solvent free reaction. On the other hand, the new diamine 8 containing pyridine ring was synthesized in two step reactions. The structures of synthesized monomers and polymers were proven by FTIR, NMR spectroscopy and elemental analysis. Also all of the above polymers were fully characterized by inherent viscosity, solubility tests, gel permeation chromatography （GPC）, differential scanning calorimetry （DSC） and thermogravimetric analysis （TGA）. The resulted PEAs have shown good inherent viscosities, solubility and thermal properties.     

Co‐poly(aryl ether sulfone)s containing phthalimidine moiety in the main chain

Several new co‐poly(arylene ether sulfone)s have been prepared by the reaction of 4,4′‐fluorodiphenyl sulfone (FDS) with different bisphenols namely 4,4′‐isopropylidenediphenol (BPA), 4,4′‐hexafluoroisopropylidenediphenol (6F‐BPA), and N‐phenyl‐3,3‐bis(4‐hydroxyphenyl)phthalimidine(PA). The homo‐poly(arylene ether sulfone)s are named as 1a, 2a, and 3a. The copolymers namely 2b, 2c, 2d and 3b, 3c, 3d have been prepared, respectively, on reaction of FDS with BPA or 6F‐BPA using different molar ratios of PA such as 25, 50, and 75. The poly(aryl ether sulfone)s 1a containing PA unit in the main chain showed a very high glass transition temperature of 280°C and an outstanding thermal stability up to 510°C for 5% weight loss under synthetic air. Depending on the mole% of PA, the glass transition temperatures of the copolymers can be varied. The polymers were soluble in a wide range of organic solvents. Transparent thin films of these polymers exhibited tensile strengths upto 84 MPa and Young's modulus up to 3.16 GPa. The films of these polymers showed low water absorption of 0.24%. Copyright © 2009 John Wiley & Sons, Ltd.     

Synthesis and characterization of photosensitive liquid crystalline poly(benzylidene‐ether)s with alkanones and methylene spacers in the main chain

Photosensitive main chain liquid crystalline poly (benzylidene‐ether)s were synthesized by Claisen‐Schmidt polycondensation reaction of 4,4′‐Diformyl‐α,ω‐diphenoxyalkanes with acetone, cyclopentanone and cyclohexanone. The diformyl precursors were synthesized from 4‐hydroxybenzaldehyde and dibromoalkanes of varying spacer lengths. The structure of the monomers and polymers was confirmed by ELEM ANAL , Fourier transform infrared, ¹H NMR and ¹³C NMR spectral analyses. Molecular weight of the polymers was determined by gel permeation chromatography and was found to be moderate. The thermogravimetric analysis data revealed that the polymers were stable up to 280 °C and start degrading thereafter. Cyclopentanone containing polymers are more stable than acetone and cyclohexanone containing polymers. The self‐extinguishing properties of the synthesized polymers were studied by the determination of the limiting oxygen index values with Van Krevelen's equation. The influence of the length of methylene spacer on phase transition was investigated with differential scanning calorimetry and proved that the isotropic temperature decreases as the spacer length increases. Polarized optical microscopic study showed that cyclohexanone containing polymer IIIb exhibit nematic schlieren texture. Crystallinity of the polymers was studied with X‐ray diffractograms. The photolysis of liquid crystalline poly(benzylidene‐ether)s revealed that the entgegen, zusammen (EZ) photoisomerization proceeds in the system. Fluorescence spectra showed violet and green emission maxima. The band gap energy is calculated from absorption spectra are in the range of 3.17–3.40 eV. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis,characterization, and chiroptical property of optically active poly(urea-urethane)s

Five new optically active poly(urea-urethane)s were synthesized by solution polyaddition of (1S,2S)-(+)-2-amino-3-methoxy-1-phenyl-1-propanol ( 4 ) with diisocyanates (diphenylmethane-4,4′-diisocyanate, toluene-2,4-diisocyanate, hexamethylene diisocyanate, isophorone diisocyanate, m-xylylene diisocyanate) at 80°C for 60 h. In some cases, the reaction mixture transformed into a gel when cooled to room temperature. The reduced viscosities are between 0.14 and 0.63 dL/g depending on the solvents and diisocyanates. Thermal behaviors of these polymers were studied by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). The T_g and crystallization temperature (T_c) were in the range of 80–200°C and 220–238°C, respectively. Thermal decomposition started at about 275°C, and the residual weights at 400°C were 15–60% depending on the polymers. The conformation of the polymers in film state was studied by circular dichroism (CD) spectra, by comparison with the corresponding model compounds which were synthesized from 4 and phenyl isocyanate or propyl isocyanate. Polymers derived from aromatic diisocyanates formed as ordered conformation in the film state, while those from aliphatic diisocyanates did not. After packing as chiral stationary phases of high-performance liquid chromatography (HPLC), the polymers showed selective resolution to trans-stilbene oxide and trans-1,2-cyclopentanedicarboxanilide. © 1993 John Wiley & Sons, Inc.     

Synthesis and characterization of novel optically active poly(amide-imide)s and poly(ester-imide)s containing calix[4]arene and amino acid units with binding ability towards alkali metal and toxic heavy metal cations

<正>A novel calix[4]arene derivative 2 with amino functional groups at the lower rim was first prepared via introduction of nitro functional groups and amination of the dinitro derivative of calix[4]arene.The optically active monomers were synthesized by dehydration of L-leucine(and L-isoleucine) and 3,3',4,4'-benzophenonetetracarboxylic- 3,3',4,4'-dianhydride(3) followed by reaction with thionyl chloride to form 5a and 5b.Two methods,polymerization under microwave irradiation and solution polymerization in CH_2Cl_2/TEA,were then employed to carry out the condensation polymerization of 2 with the optically active monomers 5a and 5b,respectively.The polymerization conditions affected the kind of resulting polymers,poly(amide-imide)s(PAIs) 6a and 6b and poly(ester-imide)s(PEIs) 6a' and 6b' were obtained selectively in good yields and moderate inherent viscosities.Sorption-extraction experiments were carried out using cram picrate extraction method and verified good binding ability of the resulting calixarene-based polymers towards silver,alkali metal and toxic heavy metal cations.Also thermogravimetric analysis indicated that the resulting PAIs and PEIs were thermally stable.     

Synthesis and characterization of novel poly(amide-imide)s containing hexafluoroisopropylidene linkage

A series of novel soluble poly(amide-imide)s were prepared from the diimide-dicarboxylic acid, 2,2-bis[N-(4-carboxyphenyl)-phthalimidyl]hexafluoropropane, with various diamines by the direct polycondensation in N-methyl-2-pyrrolidinone containing CaCl₂ using triphenyl phosphite and pyridine as condensing agents. All the polymers were obtained in quantitative yields with inherent viscosities of 0.78–1.63 dL g⁻¹. The polymers were amorphous and readily soluble in aprotic polar solvents such as N-methyl-2-pyrrolidinone, N,N-dimethylacetamide, N,N-dimethylformamide, and dimethyl sulfoxide as well as in less polar solvents such as pyridine and γ-butyrolactone, and also in tetrahydrofuran. The polymer films had tensile strength of 84–129 MPa, an elongation at break range of 6–22%, and a tensile modulus range of 2.0–2.7 GPa. The glass transition temperatures of the polymers were determined by DSC method and they were in the range of 240–282°C. These polymers were fairly stable up to a temperature around or above 400°C, and lose 10% weight in the range of 450–514°C and 440–506°C in nitrogen and air, respectively. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2629–2635, 1999