Controlled radical polymerization of styrene mediated by dithiobenzoates as reversible addition-fragmentation chain-transfer agents

The radical polymerization of styrene at 60 and 80°C mediated by benzyl dithiobenzoate and poly(styrene dithiobenzoate) as reversible addition-fragmentation chain-transfer agents has been studied. It has been shown that both agents are characterized by high chain-transfer constants and provide control over molecular-mass characteristics of polymerization products. The number-average molecular mass of polystyrene linearly grows with conversion, and the polymers are characterized by low values of polydispersity indexes. It has been demonstrated that the rate of polymerization significantly decreases with an increase in the concentration of reversible addition-fragmentation chain-transfer agents. This effect is typical of styrene polymerization mediated by dithiobenzoates. The possible reasons for this phenomenon are discussed.     

Controlled synthesis of copolymers of vinyl acetate and n-butyl acrylate mediated by trithiocarbonates as reversible addition-fragmentation chain-transfer agents

The formation of copolymers of vinyl acetate and n-butyl acrylate via polymerization mediated by di-tert-butyl trithiocarbonate and dibenzyl trithiocarbonate as reversible addition-fragmentation chain-transfer agents is studied. Copolymerization mediated by low-molecular-mass reversible addition-fragmentation chain-transfer agents and by the copolymers formed in their presence proceeds via the pseudoliving mechanism. As a result, the controlled synthesis of narrowly dispersed copolymers of various compositions and desired molecular masses may be implemented. Variation in the compositions of the copolymers with conversion is investigated, and the reactivity ratios of the comonomers are found to differ significantly (r _VA = 0.01 and r _BA = 5.38). Our experimental data make it possible to infer that gradient copolymers are formed in the systems of interest in a wide range of comonomer mixture compositions.     

The reversible addition-fragmentation chain transfer （RAFT） miniemulsion polymerization of vinyl acetate mediated by xanthate

The reversible addition-fragmentation chain transfer(RAFT) miniemulsion polymerization of vinyl acetate(VAc) mediated by methyl(methoxycarbonothioyl) sulfanyl acetate(MMSA) was carried out.The results showed that polymerizations initiated by AIBN and KPS proceeded in a controlled way.The RAFT miniemulsion polymerization of VAc initiated by KPS showed the shorter inhibition period,higher propagation rate coefficient and final conversion than those in experiment initiated by AIBN.When the monomer conversio...     

Synthesis of photochromic liquid-crystalline triblock copolymers by pseudoliving reversible addition-fragmentation chain-transfer polymerization

Symmetric photosensitive fully liquid-crystalline triblock copolymers are synthesized by pseudo-living reversible addition-fragmentation chain-transfer radical polymerization for the first time. The polymerization of 3-[methyl(phenyl)amino]propyl acrylate mediated by three different symmetric trithiocarbonates with various leaving groups is studied. It is shown that reversible addition-fragmentation chain-transfer agents make it possible to synthesize narrowly dispersed homopolymers with controlled molecular masses. Poly[(3-[methyl(phenyl)amino]propyl acrylate) trithiocarbonates] are used as polymeric reversible addition-fragmentation chain-transfer agents in the block copolymerization of the phenyl benzoate acrylic monomer. The chemical modification of block copolymers yields desirable photosensitive triblock copolymers containing azobenzene groups. The effect of the molecular structure of triblock copolymers on their phase behavior and thermal properties is examined.     

Controlled synthesis of multiblock copolymers by pseudoliving radical polymerization via the reversible addition-fragmentation chain-transfer mechanism

With the use of two classes of reversible addition-fragmentation chain-transfer agents??dithiobenzoates and trithiocarbonates??multiblock copolymers based on styrene and n-butyl acrylate, which are the best-studied monomers in these processes, are synthesized. It is shown that the polymers containing dithiobenzoate and trithiocarbonate groups are highly efficient for the synthesis of block copolymers, which is independent of the number of stages at which the polymeric RAFT agents are used in polymerization: In all cases, the polymeric RAFT agent is fully consumed in the polymerization of the ??alien?? monomer. The mechanism governing chain formation during the synthesis of multiblock copolymers, that is, the character of monomer insertion into the polymer chain, via one or both ends, is studied. It is found that the order of monomer loading determines the ratio of chains growing through one or two ends. The thermal stability of amphiphilic multiblock copolymers, their solubility in various solvents, and self-organizing ability are investigated.     

Synthesis and characterization of isoprene polymers with polar groups via reversible addition-fragmentation chain-transfer polymerization

Homo and copolymerization of isoprene (IP) with small amounts (1% wt) of glycidyl methacrylate) were conducted using the reversible addition-fragmentation chain-transfer process (RAFT) at 125 °C in a solution polymerization process using toluene as solvent. Suitable reaction conditions to avoid Diels–Alder dimerization of IP and crosslinking were determined; and 4-cyano-4-[(dodecylsulfanylthiocarbonyl)sulfanyl] pentanoic acid was found to be the best transfer agent among those tested. Theoretical calculations were used to understand why some RAFT agents work better than others in these polymerizations. Molecular weights M_n higher than 100,000 Da were reached by successive chain extension experiments, confirming the livingness of the intermediate polymers. All the successful polymerizations yielded average molar masses (M_n) of about 75% compared to the theoretical M_n (M_n,theo) depending on the agent used for control. The dispersity (Ð) ranged from 1.20 to 1.70 being a function of the control agent. The polymers were characterized by FTIR spectroscopy, ¹H NMR, and gel permeation chromatography. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 2463–2474     

Controlled synthesis of polyacrylonitrile via reversible addition-fragmentation chain-transfer pseudoliving radical polymerization and its thermal behavior

The polymerization of acrylonitrile mediated by various trithiocarbonates as reversible addition-fragmentation chain-transfer agents is studied. It is shown that, when polymerization is performed in DMSO, a narrowly dispersed PAN with a controlled molecular mass can be prepared. The pseudoliving radical polymerization of acrylonitrile is conducted for the first time via the reversible addition-fragmentation chaintransfer mechanism in carbon dioxide at an increased pressure. The structure of the polymers is investigated via NMR and IR spectroscopy. As shown by DSC and IR pyrolysis, the thermal behavior of PAN is determined by its molecular mass, the width of the molecular-mass distribution, and the conditions of synthesis. The incorporation of functional groups of the reversible addition-fragmentation chain-transfer agent into a macromolecule changes the structure of the polyconjugated system and makes it possible to control the conditions of its formation.     

Controlled synthesis of styrene and methyl methacrylate copolymers in the presence of reversible addition-fragmentation chain-transfer agents

Molecular-mass characteristics of styrene-methyl methacrylate copolymers formed via the reversible addition-fragmentation chain transfer copolymerization mediated by dithiobenzoates have been studied. Low-molecular-mass reversible-addition fragmentation chain-transfer agents active in the homopolymerization of both monomers and in the homopolymerization of only one of the monomers (styrene) can be used for the controlled synthesis of narrow dispersed copolymers. Conditions for the synthesis of narrow dispersed block copolymers with the desired structure and molecular mass of the blocks have been found. The polymer reversible addition fragmentation chain-transfer agent determines the composition and molecular mass of the first block. The structure of the second block is defined by the composition of the monomer mixture, and the molecular-mass characteristics are set by the concentration of the agent and the conversion of monomers.     

Reversible addition-fragmentation chain-transfer polymerization: Fundamentals and use in practice

Modern approaches to the synthesis of tailor-made macromolecules by radical polymerization proceeding through the reversible addition-fragmentation chain-transfer mechanism are considered. The mechanism of this process and the experimental and calculation methods for determining its main kinetic parameters are discussed. Particular emphasis is placed on the problems of designing copolymers of various microstructures, including random, gradient, and block copolymers.     

Controlled free-radical copolymerization of maleic anhydride and divinyl ether in the presence of reversible addition-fragmentation chain-transfer agents

The free-radical alternating cyclocopolymerization of maleic anhydride and divinyl ether is studied at 60–80°C in the presence of benzyl dithiobenzoate and dibenzyl trithiocarbonate as reversible addition-fragmentation chain-transfer agents. It is shown that the structure of the repeating unit of the cyclocopolymer prepared in the presence of a reversible addition-fragmentation chain-transfer agent coincides with the structure of the repeating unit of the copolymer synthesized under the conditions of conventional free-radical cyclocopolymerization. When the cyclocopolymer is used as a reversible addition-fragmentation chaintransfer agent, a successive increase in the molecular mass of the copolymer with conversion and formation of the block copolymer in the polymerization of styrene are unambiguous evidence that the copolymerization proceeds according to the pseudoliving radical mechanism.     

Controlled radical (co)polymerization of (meth)acrylic esters via the reversible addition-fragmentation chain-transfer mechanism

The homopolymerization of acrylic and fluoroacrylic esters mediated by benzyl dithiobenzoate and dibenzyl trithiocarbonate proceeds in the controlled mode via the reversible addition-fragmentation chain-transfer mechanism, while the controlled radical polymerization of methacrylic esters is not effected under these conditions. The molecular-mass characteristics of the copolymers of acrylic and methacrylic esters may be satisfactorily controlled by benzyl dithiobenzoate-mediated copolymerization when the content of acrylic esters is no less than 50 mol %. If a reversible addition-fragmentation chain-transfer agent active with respect to only one of the monomers is used, compositionally homogeneous narrowly dispersed copolymers are formed via the azeotropic copolymerization of the monomers up to high conversions. The controlled copolymerization of N-vinylpyrrolidone and fluoroacrylates allows the synthesis of alternating narrowly dispersed amphiphilic copolymers with properties different from those of alternating copolymers with a broad molecular-mass distribution.     

Controlled copolymerization of acrylonitrile in bulk via the reversible addition-fragmentation chain-transfer mechanism

The pseudoliving radical binary copolymerization of acrylonitrile with methyl acrylate, styrene, n-butyl acrylate, and tert-butyl acrylate in bulk in the presence of the reversible addition-fragmentation chain-transfer agent dibenzyl trithiocarbonate is performed for the first time. The addition of trithiocarbonate makes it possible to prepare a narrowly dispersed visually optically transparent copolymer in a wide range of monomer-feed compositions even at limiting conversions. Conditions for the synthesis of acrylonitrile copolymers with controlled molecular masses and narrow molecular-mass distributions are ascertained. In the above copolymers, the trithiocarbonate group is shown to be located within the chain.     

High-efficient surface tailoring via reverse atom transfer radical polymerization and reversible addition-fragmentation chain-transfer polymerization in an aqueous system initiated by a monocenter redox pair

The commonly used multi-center initiation methods always lead to the formation of quantities of homopolymer in the surface tailoring based on reverse atom transfer radical polymerization (ATRP) and reversible addition-fragmentation chain-transfer (RAFT) polymerization. In this study, a monocenter redox pair constructed of silica bearing tert-butyl hydroperoxide groups and ascorbic acid (SiO₂-TBHP/AsAc) was applied to substitute the commonly used initiation method of R-supported RAFT grafting polymerization. All the propagating radicals were restricted on the surface of solid particles during the whole procedure theoretically, resulting in a higher grafting efficiency of 95.1% combined with the “controllable” feature at 10 h. This redox pair was also used to initiate the reverse ATRP in miniemulsion successfully with a grafting efficiency of 86.3% at 10 h. The grafting efficiency obtained under this monocenter initiation method was significantly higher than that of the frequently reported surface modification by reverse ATRP and RAFT polymerization. In addition, the high-efficient surface tailoring was traced and confirmed by nuclear magnetic resonance, Fourier transform infrared, X-ray photoelectron spectroscopy, thermogravimetric analysis, transmission electron microscopy, and other analysis tests. The advantage of this monocenter redox pair will open a new avenue for the potential “high-efficient” surface tailoring of various materials.     

Restricted access chiral stationary phase synthesized via reversible addition-fragmentation chain-transfer polymerization for direct analysis of biological samples by high performance liquid chromatography

Novel hydrophilic microparticles containing β-cyclodextrin (β-CD) were prepared via one-pot synthesis using reversible addition-fragmentation chain-transfer (RAFT) precipitation polymerization, a “controlled/living” radical polymerization technique. The polymerization was initiated by hydrophilic macromolecular chain-transfer agent [poly(2-hydroxyethyl methacrylate), PHEMA]. The hydrophilic PHEMA on the surface of microparticles can well improve their surface hydrophilicity and lead to their biological compatibility. As chiral restricted access material (RAM), the hydrophilic microparticles can be used for determination of enantiomers in biological samples with direct injection via HPLC analysis.     

可逆加成-断裂链转移自由基聚合研究进展

RAFT(Reversible addition-fragmentation chain transfer,可逆加成-断裂链转移)自由基存在链增长自由基与链转移剂(RAFT试剂)之间的可逆蜕化转移,现已广泛应用于聚合物分子结构设计及众多功能高分子材料的合成,受到众多高分子研究者的关注,是一种发展较快的可控/活性聚合技术.本文在简要介绍了RAFT聚合发展历程基础上,综述了RAFT聚合反应机理,RAFT试剂的结构及其对聚合性能的影响,RAFT试剂与单体的匹配性,RAFT聚合实施方法等.同时也对RAFT聚合反应的发展进行了展望.     

A cyclic selenium‐based reversible addition‐fragmentation chain transfer agent mediated polymerization of vinyl acetate

A cyclic selenium‐based reversible addition‐fragmentation chain transfer (RAFT) agent, 5,5‐dimethyl‐3‐phenyl‐2‐selenoxo‐1,3‐selenazolidin‐4‐one (RAFT‐Se), was synthesized and utilized in the RAFT polymerizations of vinyl acetate (VAc). Its analog, 5,5‐dimethyl‐3‐phenyl‐2‐thioxothiazolidin‐4‐one (RAFT‐S), was also used in RAFT polymerizations for comparison under identical conditions. The RAFT polymerizations of VAc with RAFT‐Se were moderately controlled evidenced by the increase of molecular weights with conversion, despite the slightly high M_w/M_n (less than 1.90), whereas the molecular weights were poorly controlled in the presence of RAFT‐S (2.00 < M_w/M_n < 2.30). Thanks to its unusual cyclic structure of RAFT‐Se, one or more RAFT‐Se species was incorporated into the resultant poly(VAc) as revealed by the results of cleavage of polymer and atomic absorption spectroscopy. Considering the biorelated functions of both poly(VAc) and Se element, this work undoubtedly provided a successful methodology of how to incorporate high content of Se into a molecular weight controlled poly(VAc). © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

可逆加成-断裂链转移自由基聚合研究进展

综述了活性/可控自由基聚合中的可逆加成-断裂链转移(RAFT)自由基聚合研究进展;总结了RAFT试剂、RAFT聚合反应条件、RAFT聚合物及其结构形貌的最新研究进展;指出RAFT自由基聚合反应已被作为重要方法之一用于合成具有特定分子结构的聚合物.     

Free-radical polymerization of methyl methacrylate in the presence of dithiobenzoates as reversible addition-fragmentation chain transfer agents

The pseudoliving radical polymerization of methyl methacrylate in bulk mediated by dithiobenzoates with various leaving groups as reversible addition-fragmentation chain-transfer agents has been studied. It has been shown that polymerization proceeds under conditions of the low steady-state concentration of radical intermediates; as a result, the steady-state of the process is rapidly achieved even at low conversions. Retardation of polymerization observed at high concentrations of reversible addition-fragmentation chain-transfer agents is apparently associated with the occurrence of chain termination reactions involving intermediates, as evidenced by the model reaction. The autoacceleration of polymerization is suppressed with an increase in the concentration of reversible addition-fragmentation chain-transfer agents. An efficient approach to the synthesis of a narrow-dispersed PMMA with the controlled molecular mass has been suggested.