阳极氧化铝模板表面自组织条纹的形成

对未经化学抛光处理的Al进行阳极氧化得到阳极氧化铝模板，发现Al表面形成了条纹与多孔阵列共存的自组织结构，用原子力显微镜对这种结构进行了研究.借助Brusselator模型对条纹的形成机理进行了讨论，认为条纹图案是Al表面氧化层/电解液界面的Al₂O₃在整个反应过程中的生成和溶解两个过程相互竞争导致的，只有在特定的反应条件才会出现高度有序的结构. 关键词： 氧化铝模板（AAO） 原子力显微镜（AFM） 自组织条纹 Brusselator模型     

B（N）掺杂单壁碳纳米管的Al原子吸附性能的第一性原理研究

采用基于密度泛函理论的平面波赝势方法和广义梯度近似,对未掺杂、掺B、掺N的碳纳米管(CNT)不同位置上Al原子的吸附进行了几何优化,计算了吸附Al、掺杂前后CNT的能带结构、态密度、差分电荷密度、电荷布居数和吸附能.计算结果表明,掺B使CNT形成缺电子状态,利于具有自由电子的Al原子的吸附结合,可显著提高Al在金属性的(5,5)CNT和半导性的(8,0)CNT外壁的吸附能;掺杂N形成多电子状态,在费米能级附近半满的施主能级也利于填充Al的价电子,改善Al在(5,5)CNT和(8,0)CNT外壁的吸附结合性 关键词： 密度泛函理论 单壁碳纳米管 B(N)掺杂 Al原子吸附     

Electron field emission from a patterned array of diamond-like carbon on anodic aluminum oxide template

A patterned array of diamond-like carbon (DLC) was grown on anodic aluminum oxide (AAO) template by filtered cathodic arc plasma (FCAP) technique at room temperature. The diameters of patterned array of DLC were ∼150 nm, and the patterned array density was estimated to ∼10⁹ cm⁻². A broad asymmetric band ranging from 1000 cm⁻¹ to 2000 cm⁻¹ was detected by Raman spectrum attributed to characteristic band of DLC. The fraction of sp³ bonded carbon atoms of the patterned array of DLC was measured by X-ray photoelectron spectrum (XPS) and the ratio was about 62.4%. Field emission properties of the patterned array of DLC were investigated. A low turn-on field of 3.4 V/μm at 10 μA/cm² with an emission area of 3.14 mm² was achieved. The results indicated that the electrons were emitted under both the effect of enhanced field because of the geometry and the work function of the DLC sample. Based on Fowler-Nordheim plot, the values of work function for the patterned array of DLC were estimated in range of 0.38 to 1.75 from a linearity plot.     

多孔阳极氧化铝薄膜光学常数的确定

根据多孔阳极氧化铝(AAO)薄膜的实验透射谱(200—2500nm)，采用极值包络线算法确定其光学常数，并由此较精确地计算出AAO薄膜样品在该波段的光学常数.结果表明，多孔氧化铝薄膜表现出直接带隙(能隙约4．5eV)半导体的光学特性，且其光学常数与制样中的重要工艺参数阳极氧化电压有显著的相关性，即随阳极氧化电压的增加，AAO薄膜的厚度、折射率和光学能隙变大，消光系数减小．同时，计算得到的薄膜厚度与实测值相吻合，则说明计算结果和实验值是自洽的. 关键词： 薄膜光学 光学常数 多孔阳极氧化铝 阳极氧化电压     

Flexible polyethylene terephthalate (PET) electrodes based on single-walled carbon nanotubes (SWCNTs) for supercapacitor application

Flexible polyethylene terephthalate (PET) electrodes based on pristine single-walled carbon nanotubes (SWCNTs) and acid-treated single-walled carbon nanotubes (A-SWCNTs) were prepared by spray coating technique. Flexible A-SWCNTs electrodes showed enhanced electrochemical properties compared to the pristine SWCNTs electrodes. The electrochemical properties of the flexible A-SWCNTs electrodes were optimized with various types of aqueous electrolytes including sulfuric acid (H₂SO₄), sodium sulfate (Na₂SO₄), potassium chloride (KCl), sodium hydroxide (NaOH), and potassium hydroxide (KOH). The electrochemical performance of the A-SWCNTs electrodes as a function of bending to 30° were evaluated using cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and galvanostatic charge/discharge (GCD) measurements in 1 M H₂SO₄. The specific capacitance value of the unbent A-SWCNTs electrode was 67 F g^?1, which decreased to 63 F g^?1 (94% retention) after 1000 GCD cycles. Interestingly, the specific capacitance of the unbent A-SWCNTs electrode with application of the 1000 GCD cycles was retained even after 500 bending to 30° with 6000 GCD cycles.     

银纳米阵列直径对SERS增强效果的影响

采用电化学沉积法分别在不同孔径的阳极氧化铝(AAO)模板上沉积一系列直径不同,排列规则的银纳米阵列。以对氨基苯甲酸(PABA)和三聚氰胺两种分子分别作为探针分子, 研究了银纳米阵列的直径大小对其表面增强拉曼散射(SERS)效果的影响。结果表明, 在波长为514.5 nm的激光激发下, 探针分子的SERS信号强度随银纳米阵列直径的改变而明显变化, 并在银纳米阵列直径约为53 nm时, SERS强度达到最大。利用电磁增强机制对此实验结果进行了分析和解释。     

Surface-enhanced Raman scattering (SERS) activity of Ag, Au and Cu nanoclusters on TiO2-nanotubes/Ti substrate

Tubular arrays of TiO₂ nanotubes (ranging in diameter from 40 to 110 nm) on a Ti substrate were used as a support for Ag, Au or Cu deposits obtained by the sputter deposition technique, where the amount of metal varied from 0.01 to 0.2 mg/cm². Those composite supports were intended for surface-enhanced Raman scattering (SERS) investigations. Composite samples were studied with the aid of scanning electron microscopy (SEM) and Auger electron spectroscopy (AES) to reveal their characteristic morphological and chemical features. Raman spectra of pyridine (as a probe molecule) were measured at different cathodic potentials ranging from −0.2 down to −1.2 V after the pyridine had been adsorbed on the metal-covered TiO₂ nanotube/Ti substrates. In addition, SERS spectra on a bulk standard activated Ag, Au and Cu substrates were also measured. The SERS activity of the composite samples was strongly dependent on the amount of metal deposit, e.g. at and above 0.06 mg Ag/cm², the intensity of SERS signal was even higher than that for the Ag reference substrate. The high activity of these composites is mainly a result of their specific morphology. The high SERS sensitivity on the surface morphology of the substrate made it possible to monitor very small temporal changes in the Ag metal clusters. This rearrangement was not detectable with microscopic (SEM) or microanalytical (AES) methods. The SERS activity of Au or Cu clusters was distinctly lower than those of Ag. The spectral differences exhibited by the three kinds of composites as compared to the reference metal samples are discussed.     

Electrochemical functionalisation of SWNTs with poly(3,4‐ethylenedioxythiophene) evidenced by anti‐Stokes/Stokes Raman spectroscopy

The capability of anti‐Stokes/Stokes Raman spectroscopy to evaluate chemical interactions at the interface of a conducting polymer/carbon nanotubes is demonstrated. Electrochemical polymerisation of the monomer 3,4‐ethylenedioxythiophene (EDOT) on a Au support covered with a single‐walled carbon nanotube (SWNT) film immersed in a LiClO₄/CH₃CN solution was carried out. At the resonant optical excitation, which occurs when the energy of the exciting light coincides with the energy of an electronic transition, poly(3,4‐ethylenedioxythiophene) (PEDOT) deposited electrochemically as a thin film of nanometric thickness on a rough Au support presents an abnormally intense anti‐Stokes Raman spectrum. The additional increase in Raman intensity in the anti‐Stokes branch observed when PEDOT is deposited on SWNTs is interpreted as resulting from the excitation of plasmons in the metallic nanotubes. A covalent functionalisation of SWNTs with PEDOT both in un‐doped and doped states takes place when the electropolymerisation of EDOT, with stopping at +1.6 V versus Ag/Ag⁺, is performed on a SWNT film deposited on a Au plate. The presence of PEDOT covalently functionalised SWNTs is rationalised by (1) a downshift by a few wavenumbers of the polymer Raman line associated with the symmetric C C stretching mode and (2) an upshift of the radial breathing modes of SWNTs, both variations revealing an interaction between SWNTs and the conjugated polymer. Raman studies performed at different excitation wavelengths indicate that the resonant optical excitation is the key condition to observe the abnormal anti‐Stokes Raman effect. Copyright © 2010 John Wiley & Sons, Ltd.     

SEM and XPS studies of nanohole arrays on InP(1 0 0) surfaces created by coupling AAO templates and low energy Ar ion sputtering

The aim of the present study is to demonstrate the feasibility to form well-ordered nanoholes on InP(1 0 0) surfaces by low Ar⁺ ion sputtering process in UHV conditions from anodized aluminum oxide (AAO) templates. This process is a promising approach in creating ordered arrays of surface nanostructures with controllable size and morphology. To follow the Ar⁺ ion sputtering effects on the AAO/InP surfaces, X-ray photoelectron spectroscopy (XPS) was used to determine the different surface species. In_4d and P_2p core level spectra were recorded on different InP(1 0 0) surfaces after ions bombardment. XPS results showed the presence of metallic indium on both smooth InP(1 0 0) and AAO/InP(1 0 0) surfaces. Finally, we showed that this experiment led to the formation of metallic In dropplets about 10 nm in diameter on nanoholes patterned InP surface while the as-received InP(1 0 0) surface generated metallic In about 60 nm in diameter.     

Anti‐Stokes Raman spectroscopy as a method to identify the metallic and semiconducting configurations of double‐walled carbon nanotubes

Although Raman spectra reveal, as a signature of double‐walled carbon nanotubes (DWCNTs), two radial breathing mode (RBM) lines associated with the inner and outer tubes, the specification of their nature as metallic or semiconducting remains a topic for debate. Investigating the spectral range of the RBM lines, we present a new procedure of the indexing of the semiconducting or metallic nature of the inner and outer shell that forms the DWCNT. The procedure exploits the difference between the intensities of recorded anti‐Stokes Raman spectrum and the anti‐Stokes spectrum calculated by applying the Boltzmann formulae to the recorded Stokes spectrum. The results indicate that the two spectra do not coincide with what should happen in a normal Raman process, namely, that there are RBM lines of the same intensity in both spectra, as well as RBM lines of higher intensity that are observed in the calculated spectrum. This discrepancy results from the surface‐enhanced Raman scattering mechanism that operates differently on metallic or semiconducting nanotubes. In this context, the analysis of the RBM spectrum can reveal pairs of lines associated with the inner/outer shell structure of DWCNT, and when the intensities between the recorded and calculated spectra coincide, the nanotube is metallic; otherwise, the nanotube is semiconducting. Copyright © 2014 John Wiley & Sons, Ltd.     

运用表面增强拉曼散射(SERS)和密度泛函数理论(DFT)模拟计算研究对硝基苯胺在金纳米颗粒表面吸附行为

在沉积金纳米颗粒的干燥滤纸上进行对硝基苯胺的表面增强拉曼散射(SERS)光谱研究,并与对硝基苯胺在金胶水溶液中的表面增强拉曼散射(SERS)光谱相比,分子拉曼光谱发生了很大变化。同时利用DFT理论计算对硝基苯胺在金胶颗粒上的吸附行为的拉曼光谱。DFT理论模拟计算和FI-Raman实验分析都表明这种变化源于对硝基苯胺的不同吸附方式。SERS和DFT结合研究分子的吸附是一种有效的技术。     

超长(n,n)型碳纳米管的密度泛函理论研究

用密度泛函B3LYP/3-21G(d)方法,并利用周期边界条件,研究了n=2—20不同管径的超长(n, n)型单壁碳纳米管的结构、能量、能带结构和能隙.结果表明,管径和能量(或生成焓)都随n有很好的变化规律,并可拟合成很好的解析函数.当n为2和3时,碳纳米管的能隙分别为1.836eV和0.228eV,呈半导体特征,且具有间接带隙;当n=4—20时,能隙介于0.027 eV和0.079 eV之间,呈较强的金属性,且具有直接带 关键词： 扶手椅型碳纳米管 周期边界条件(PBC) 超长模型 能带     

Comparison of SERRS and RRS excitation profiles of [Fe(tpy)2]2+ (tpy = 2,2':6',2'‐terpyridine) supported by DFT calculations: effect of the electrostatic bonding to chloride‐modified Ag nanoparticles on its vibrational and electronic structure

Nonresonance (or normal) Raman scattering (NRS), resonance Raman scattering (RRS), surface‐enhanced Raman scattering (SERS), and surface‐enhanced RRS (SERRS) spectra of [Fe(tpy)₂]²⁺ complex dication (tpy = 2,2':6',2''‐terpyridine) are reported. The comparison of RRS/NRS and SERRS/SERS excitation profiles of [Fe(tpy)₂]²⁺ spectral bands in the range of 445–780 nm is supported by density functional theory (DFT) calculations, Raman depolarization measurements, comparison of the solid [Fe(tpy)₂](SO₄)₂ and solution RRS spectra, and characterization of the Ag nanoparticle (NP) hydrosol/[Fe(tpy)₂]²⁺ SERS/SERRS active system by surface plasmon extinction spectrum and transmission electron microscopy image of the fractal aggregates (D = 1.82). By DFT calculations, both the Raman active modes and the electronic states of the complex have been assigned to the symmetry species of the D_2d point group. It has been demonstrated that upon the electrostatic bonding of the complex dication to the chloride‐modified Ag NPs, the geometric and ground state electronic structure of the complex and the identity of the three different metal‐to‐ligand charge transfer (¹MLCT) electronic transitions remain preserved. On the other hand, the effect of ion pairing manifests itself by a slight change in localization of one of the electronic transitions (with max. at 552 nm) as well as by promotion of the Herzberg–Teller activation of E modes resulting from coupling of E and B₂ excited electronic states. Finally, the very low, 1 × 10⁻¹¹ M SERRS spectral detection limit of [Fe(tpy)₂]²⁺ at 532‐nm excitation is attributed to a concerted action of the electromagnetic and molecular resonance mechanism, in conjunction to the electrostatic bonding of the complex dication to the chloride‐modified Ag NP surface. Copyright © 2014 John Wiley & Sons, Ltd.     

Molecular dynamics of laser-assisted decomposition of unstable molecules at the surface of carbon nanotubes: case study of CH2(NO2)2 on CNT(4,0)

ABSTRACT

In this study, photoreactions of the dinitromethane molecule noncovalently adsorbed on the (4, 0) carbon nanotube (CNT) have been investigated by time-dependent, excited-state molecular dynamics, which takes into account simultaneous evolution of electronic excitation and nuclear positions under periodic optical excitations. It is found that desorption of molecular adsorbate from CNT surface can be controlled by UV?vis photoexcitations. In addition, it is shown that the presence of CNT substrate facilitates photodecomposition of the adsorbate molecule, related to optically controlled explosion. This model demonstrates potential of photoinduced charge transfer between the adsorbate and substrate, which can affect efficiency of desorption and decomposition reactions. This process has a potential use as a remote trigger for larger scale detonations, or as a mechanism for ‘cleaning’ CNTs of unwanted functionalisation.     

碳纳米管受限空间对共轭高分子聚(9,9-二辛基芴-2,7-二基)链段运动行为的影响

在纳米受限空间中,高分子往往会表现出与本体状态不同的性质,如异常的链段运动特性及晶相间转变行为等,这些性质对于研究和开发新型高分子材料具有重要的意义,因此针对受限环境下高分子的物理化学特性研究也一直是高分子界关注的焦点.本文通过化学气相沉积法制备垂直取向排列的多壁碳纳米管阵列,借助溶剂润湿–收缩法获得规整的高密度阵列结构,其取向排列的碳纳米管间隙形成了准一维的纳米受限空间,尺寸在5—50 nm尺度下可调.进一步将共轭高分子聚(9,9-二辛基芴-2,7-二基)(PFO)填充到碳管间隙的纳米空间中,制备PFO与取向多壁碳纳米管阵列复合膜.结果发现在碳纳米管形成的纳米受限空间中,PFO的链段热运动行为与本征态PFO薄膜相比受到了明显的抑制,不同晶型间转变速度大大减缓,提高了构象的热稳定性,同时取向排列的碳纳米管对PFO分子链取向排列分布具有明显的诱导作用,有利于获得高性能的PFO晶体.这种高密度取向排列的碳纳米管阵列结构未来可以用于制备优良发光性能及高稳定性的PFO光电器件.     

Influence of the ultra-thin Ag layer on Si(1 1 1)7 × 7 on directional elastic peak electron spectroscopy profiles

The directional elastic peak electron spectroscopy (DEPES) polar profiles for the clean Si(1 1 1)7 × 7 surface and the Si(1 1 1)√ 3 × √3R30°-Ag system are presented. The results were obtained for the and azimuths of the substrate for primary electron energies from the range 0.5-2 keV. A simple qualitative analysis of the observed profiles revealed the influence of the ultra-thin silver layer on the shape of the measured DEPES polar profiles, i.e. both on their background level and on the height of some intensity maxima. Thus, the information on the position of silver atoms in the investigated structure and other ultra-thin layers on crystalline substrates seems to be obtainable by the analysis of the DEPES profiles. The presence of numerous maxima in the measured profiles imply the application of a more advanced method in qualitative and quantitative interpretation of the DEPES profiles.